1/* 2 * U-boot - Configuration file for CM-BF527 board 3 */ 4 5#ifndef __CONFIG_CM_BF527_H__ 6#define __CONFIG_CM_BF527_H__ 7 8#include <asm/config-pre.h> 9 10 11/* 12 * Processor Settings 13 */ 14#define CONFIG_BFIN_CPU bf527-0.0 15#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA 16 17 18/* 19 * Clock Settings 20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV 21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV 22 */ 23/* CONFIG_CLKIN_HZ is any value in Hz */ 24#define CONFIG_CLKIN_HZ 25000000 25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ 26/* 1 = CLKIN / 2 */ 27#define CONFIG_CLKIN_HALF 0 28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ 29/* 1 = bypass PLL */ 30#define CONFIG_PLL_BYPASS 0 31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ 32/* Values can range from 0-63 (where 0 means 64) */ 33#define CONFIG_VCO_MULT 21 34/* CCLK_DIV controls the core clock divider */ 35/* Values can be 1, 2, 4, or 8 ONLY */ 36#define CONFIG_CCLK_DIV 1 37/* SCLK_DIV controls the system clock divider */ 38/* Values can range from 1-15 */ 39#define CONFIG_SCLK_DIV 4 40 41 42/* 43 * Memory Settings 44 */ 45#define CONFIG_MEM_ADD_WDTH 9 46#define CONFIG_MEM_SIZE 32 47 48#define CONFIG_EBIU_SDRRC_VAL 0x3f8 49#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd 50 51#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) 52#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) 53#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) 54 55#define CONFIG_SYS_MONITOR_LEN (256 * 1024) 56#define CONFIG_SYS_MALLOC_LEN (128 * 1024) 57 58 59/* 60 * NAND Settings 61 * (can't be used sametime as ethernet) 62 */ 63/* #define CONFIG_BFIN_NFC */ 64#ifdef CONFIG_BFIN_NFC 65#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 66#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ 67#define CONFIG_SYS_MAX_NAND_DEVICE 1 68#define NAND_MAX_CHIPS 1 69#define CONFIG_CMD_NAND 70#endif 71 72 73/* 74 * Network Settings 75 */ 76#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \ 77 !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC) 78#define ADI_CMDS_NETWORK 1 79#define CONFIG_BFIN_MAC 80#define CONFIG_RMII 81#define CONFIG_NETCONSOLE 1 82#define CONFIG_NET_MULTI 1 83#endif 84#define CONFIG_HOSTNAME cm-bf527 85/* Uncomment next line to use fixed MAC address */ 86/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ 87 88 89/* 90 * Flash Settings 91 */ 92#define CONFIG_FLASH_CFI_DRIVER 93#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 94#define CONFIG_SYS_FLASH_BASE 0x20000000 95#define CONFIG_SYS_FLASH_CFI 96#define CONFIG_SYS_FLASH_PROTECTION 97#define CONFIG_SYS_MAX_FLASH_BANKS 1 98#define CONFIG_SYS_MAX_FLASH_SECT 67 99 100 101/* 102 * Env Storage Settings 103 */ 104#define CONFIG_ENV_IS_IN_FLASH 1 105#define CONFIG_ENV_ADDR 0x20008000 106#define CONFIG_ENV_OFFSET 0x8000 107#define CONFIG_ENV_SIZE 0x8000 108#define CONFIG_ENV_SECT_SIZE 0x20000 109#define ENV_IS_EMBEDDED_CUSTOM 110 111 112/* 113 * I2C Settings 114 */ 115#define CONFIG_BFIN_TWI_I2C 1 116#define CONFIG_HARD_I2C 1 117#define CONFIG_SYS_I2C_SPEED 50000 118#define CONFIG_SYS_I2C_SLAVE 0 119 120 121/* 122 * Misc Settings 123 */ 124#define CONFIG_BAUDRATE 115200 125#define CONFIG_MISC_INIT_R 126#define CONFIG_RTC_BFIN 127#define CONFIG_UART_CONSOLE 0 128 129 130/* 131 * Pull in common ADI header for remaining command/environment setup 132 */ 133#include <configs/bfin_adi_common.h> 134 135#endif 136