/*
 * Copyright (C) 2006 Atmel Corporation
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#include <common.h>
#include <netdev.h>

#include <asm/io.h>
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
#include <asm/arch/portmux.h>
#include <atmel_lcdc.h>
#include <lcd.h>

#include "../../../cpu/at32ap/hsmc3.h"

#if defined(CONFIG_LCD)
/* 480x272x16 @ 72 Hz */
vidinfo_t panel_info = {
        .vl_col                 = 480,          /* Number of columns */
        .vl_row                 = 272,          /* Number of rows */
        .vl_clk                 = 5000000,      /* pixel clock in ps */
        .vl_sync                = ATMEL_LCDC_INVCLK_INVERTED |
                                  ATMEL_LCDC_INVLINE_INVERTED |
                                  ATMEL_LCDC_INVFRAME_INVERTED,
        .vl_bpix                = LCD_COLOR16,  /* Bits per pixel, BPP = 2^n */
        .vl_tft                 = 1,            /* 0 = passive, 1 = TFT */
        .vl_hsync_len           = 42,           /* Length of horizontal sync */
        .vl_left_margin         = 1,            /* Time from sync to picture */
        .vl_right_margin        = 1,            /* Time from picture to sync */
        .vl_vsync_len           = 1,            /* Length of vertical sync */
        .vl_upper_margin        = 12,           /* Time from sync to picture */
        .vl_lower_margin        = 1,            /* Time from picture to sync */
        .mmio                   = LCDC_BASE,    /* Memory mapped registers */
};

void lcd_enable(void)
{
}

void lcd_disable(void)
{
}
#endif

DECLARE_GLOBAL_DATA_PTR;

static const struct sdram_config sdram_config = {
        .data_bits      = SDRAM_DATA_16BIT,
        .row_bits       = 13,
        .col_bits       = 9,
        .bank_bits      = 2,
        .cas            = 3,
        .twr            = 2,
        .trc            = 6,
        .trp            = 2,
        .trcd           = 2,
        .tras           = 6,
        .txsr           = 6,
        /* 15.6 us */
        .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
};

int board_early_init_f(void)
{
        /* Enable SDRAM in the EBI mux */
        hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));

        /* Enable 26 address bits and NCS2 */
        portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
        portmux_enable_usart1(PORTMUX_DRIVE_MIN);

        /* de-assert "force sys reset" pin */
        portmux_select_gpio(PORTMUX_PORT_D, 1 << 15,
                        PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);

        /* init custom i/o */
        /* cpu type inputs */
        portmux_select_gpio(PORTMUX_PORT_E, (1 << 19) | (1 << 20) | (1 << 23),
                        PORTMUX_DIR_INPUT);
        /* main board type inputs */
        portmux_select_gpio(PORTMUX_PORT_B, (1 << 19) | (1 << 29),
                        PORTMUX_DIR_INPUT);
        /* DEBUG input (use weak pullup) */
        portmux_select_gpio(PORTMUX_PORT_E, 1 << 21,
                        PORTMUX_DIR_INPUT | PORTMUX_PULL_UP);

        /* are we suppressing the console ? */
        if (gpio_get_value(GPIO_PIN_PE(21)) == 1)
                gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);

        /* reset phys */
        portmux_select_gpio(PORTMUX_PORT_E, 1 << 24, PORTMUX_DIR_INPUT);
        portmux_select_gpio(PORTMUX_PORT_C, 1 << 18,
                        PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);

        udelay(5000);

        /* release phys reset */
        gpio_set_value(GPIO_PIN_PC(18), 0);     /* PHY RESET (Release)  */

        /* setup Data Flash chip select (NCS2) */
        hsmc3_writel(MODE2, 0x20121003);
        hsmc3_writel(CYCLE2, 0x000a0009);
        hsmc3_writel(PULSE2, 0x0a060806);
        hsmc3_writel(SETUP2, 0x00030102);

        /* setup FRAM chip select (NCS3) */
        hsmc3_writel(MODE3, 0x10120001);
        hsmc3_writel(CYCLE3, 0x001e001d);
        hsmc3_writel(PULSE3, 0x08040704);
        hsmc3_writel(SETUP3, 0x02050204);

#if defined(CONFIG_MACB)
        /* init macb0 pins */
        portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
        portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
#endif

#if defined(CONFIG_MMC)
        portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
#endif

#if defined(CONFIG_LCD)
        portmux_enable_lcdc(1);
#endif

        return 0;
}

phys_size_t initdram(int board_type)
{
        unsigned long expected_size;
        unsigned long actual_size;
        void *sdram_base;

        sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);

        expected_size = sdram_init(sdram_base, &sdram_config);
        actual_size = get_ram_size(sdram_base, expected_size);

        unmap_physmem(sdram_base, EBI_SDRAM_SIZE);

        if (expected_size != actual_size)
                printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
                                actual_size >> 20, expected_size >> 20);

        return actual_size;
}

int board_early_init_r(void)
{
        gd->bd->bi_phy_id[0] = 0x01;
        gd->bd->bi_phy_id[1] = 0x03;
        return 0;
}

int board_postclk_init(void)
{
        /* Use GCLK0 as 10MHz output */
        gclk_enable_output(0, PORTMUX_DRIVE_LOW);
        gclk_set_rate(0, GCLK_PARENT_OSC0, 10000000);
        return 0;
}

/* SPI chip select control */
#ifdef CONFIG_ATMEL_SPI
#include <spi.h>

int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
        return (bus == 0) && (cs == 0);
}

void spi_cs_activate(struct spi_slave *slave)
{
}

void spi_cs_deactivate(struct spi_slave *slave)
{
}
#endif /* CONFIG_ATMEL_SPI */

#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bi)
{
        macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
        macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);

        return 0;
}
#endif