LXR uboot/drivers/net/smc91111.h

   1/*------------------------------------------------------------------------
   2 . smc91111.h - macros for the LAN91C111 Ethernet Driver
   3 .
   4 . (C) Copyright 2002
   5 . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   6 . Rolf Offermanns <rof@sysgo.de>
   7 . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
   8 .       Developed by Simple Network Magic Corporation (SNMC)
   9 . Copyright (C) 1996 by Erik Stahlman (ES)
  10 .
  11 . This program is free software; you can redistribute it and/or modify
  12 . it under the terms of the GNU General Public License as published by
  13 . the Free Software Foundation; either version 2 of the License, or
  14 . (at your option) any later version.
  15 .
  16 . This program is distributed in the hope that it will be useful,
  17 . but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 . GNU General Public License for more details.
  20 .
  21 . You should have received a copy of the GNU General Public License
  22 . along with this program; if not, write to the Free Software
  23 . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  24 .
  25 . This file contains register information and access macros for
  26 . the LAN91C111 single chip ethernet controller.  It is a modified
  27 . version of the smc9194.h file.
  28 .
  29 . Information contained in this file was obtained from the LAN91C111
  30 . manual from SMC.  To get a copy, if you really want one, you can find
  31 . information under www.smsc.com.
  32 .
  33 . Authors
  34 .      Erik Stahlman                           ( erik@vt.edu )
  35 .      Daris A Nevil                           ( dnevil@snmc.com )
  36 .
  37 . History
  38 . 03/16/01             Daris A Nevil   Modified for use with LAN91C111 device
  39 .
  40 ---------------------------------------------------------------------------*/
  41#ifndef _SMC91111_H_
  42#define _SMC91111_H_
  43
  44#include <asm/types.h>
  45#include <config.h>
  46
  47/*
  48 * This function may be called by the board specific initialisation code
  49 * in order to override the default mac address.
  50 */
  51
  52void smc_set_mac_addr (const unsigned char *addr);
  53
  54
  55/* I want some simple types */
  56
  57typedef unsigned char                   byte;
  58typedef unsigned short                  word;
  59typedef unsigned long int               dword;
  60
  61struct smc91111_priv{
  62        u8 dev_num;
  63};
  64
  65/*
  66 . DEBUGGING LEVELS
  67 .
  68 . 0 for normal operation
  69 . 1 for slightly more details
  70 . >2 for various levels of increasingly useless information
  71 .    2 for interrupt tracking, status flags
  72 .    3 for packet info
  73 .    4 for complete packet dumps
  74*/
  75/*#define SMC_DEBUG 0 */
  76
  77/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
  78
  79#define SMC_IO_EXTENT   16
  80
  81#ifdef CONFIG_PXA250
  82
  83#ifdef CONFIG_XSENGINE
  84#define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+((r)<<1))))
  85#define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+((r)<<1))))
  86#define SMC_inb(a,p)  ({ \
  87        unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \
  88        unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
  89        if (__p & 2) __v >>= 8; \
  90        else __v &= 0xff; \
  91        __v; })
  92#elif defined(CONFIG_XAENIAX)
  93#define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r))))
  94#define SMC_inw(a,z)    ({ \
  95        unsigned int __p = (unsigned int)((a)->iobase + (z)); \
  96        unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \
  97        if (__p & 3) __v >>= 16; \
  98        else __v &= 0xffff; \
  99        __v; })
 100#define SMC_inb(a,p)    ({ \
 101        unsigned int ___v = SMC_inw((a),(p) & ~1); \
 102        if ((p) & 1) ___v >>= 8; \
 103        else ___v &= 0xff; \
 104        ___v; })
 105#else
 106#define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r))))
 107#define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+(r))))
 108#define SMC_inb(a,p)    ({ \
 109        unsigned int __p = (unsigned int)((a)->iobase + (p)); \
 110        unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
 111        if (__p & 1) __v >>= 8; \
 112        else __v &= 0xff; \
 113        __v; })
 114#endif
 115
 116#ifdef CONFIG_XSENGINE
 117#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
 118#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d)
 119#elif defined (CONFIG_XAENIAX)
 120#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
 121#define SMC_outw(a,d,p) ({ \
 122        dword __dwo = SMC_inl((a),(p) & ~3); \
 123        dword __dwn = (word)(d); \
 124        __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \
 125        __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \
 126        SMC_outl((a), __dwo, (p) & ~3); \
 127})
 128#else
 129#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
 130#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
 131#endif
 132
 133#define SMC_outb(a,d,r) ({      word __d = (byte)(d);  \
 134                                word __w = SMC_inw((a),(r)&~1);  \
 135                                __w &= ((r)&1) ? 0x00FF : 0xFF00;  \
 136                                __w |= ((r)&1) ? __d<<8 : __d;  \
 137                                SMC_outw((a),__w,(r)&~1);  \
 138                        })
 139
 140#define SMC_outsl(a,r,b,l)      ({      int __i; \
 141                                        dword *__b2; \
 142                                        __b2 = (dword *) b; \
 143                                        for (__i = 0; __i < l; __i++) { \
 144                                            SMC_outl((a), *(__b2 + __i), r); \
 145                                        } \
 146                                })
 147
 148#define SMC_outsw(a,r,b,l)      ({      int __i; \
 149                                        word *__b2; \
 150                                        __b2 = (word *) b; \
 151                                        for (__i = 0; __i < l; __i++) { \
 152                                            SMC_outw((a), *(__b2 + __i), r); \
 153                                        } \
 154                                })
 155
 156#define SMC_insl(a,r,b,l)       ({      int __i ;  \
 157                                        dword *__b2;  \
 158                                        __b2 = (dword *) b;  \
 159                                        for (__i = 0; __i < l; __i++) {  \
 160                                          *(__b2 + __i) = SMC_inl((a),(r));  \
 161                                          SMC_inl((a),0);  \
 162                                        };  \
 163                                })
 164
 165#define SMC_insw(a,r,b,l)               ({      int __i ;  \
 166                                        word *__b2;  \
 167                                        __b2 = (word *) b;  \
 168                                        for (__i = 0; __i < l; __i++) {  \
 169                                          *(__b2 + __i) = SMC_inw((a),(r));  \
 170                                          SMC_inw((a),0);  \
 171                                        };  \
 172                                })
 173
 174#define SMC_insb(a,r,b,l)       ({      int __i ;  \
 175                                        byte *__b2;  \
 176                                        __b2 = (byte *) b;  \
 177                                        for (__i = 0; __i < l; __i++) {  \
 178                                          *(__b2 + __i) = SMC_inb((a),(r));  \
 179                                          SMC_inb((a),0);  \
 180                                        };  \
 181                                })
 182
 183#elif defined(CONFIG_LEON)      /* if not CONFIG_PXA250 */
 184
 185#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); })
 186
 187#define SMC_LEON_SWAP32(_x_)                    \
 188    ({ dword _x = (_x_);                        \
 189       ((_x << 24) |                            \
 190       ((0x0000FF00UL & _x) <<  8) |            \
 191       ((0x00FF0000UL & _x) >>  8) |            \
 192       (_x  >> 24)); })
 193
 194#define SMC_inl(a,r)    (SMC_LEON_SWAP32((*(volatile dword *)((a)->iobase+((r)<<0)))))
 195#define SMC_inl_nosw(a,r)       ((*(volatile dword *)((a)->iobase+((r)<<0))))
 196#define SMC_inw(a,r)    (SMC_LEON_SWAP16((*(volatile word *)((a)->iobase+((r)<<0)))))
 197#define SMC_inw_nosw(a,r)       ((*(volatile word *)((a)->iobase+((r)<<0))))
 198#define SMC_inb(a,p)    ({ \
 199        word ___v = SMC_inw((a),(p) & ~1); \
 200        if ((p) & 1) ___v >>= 8; \
 201        else ___v &= 0xff; \
 202        ___v; })
 203
 204#define SMC_outl(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP32(d))
 205#define SMC_outl_nosw(a,d,r)    (*(volatile dword *)((a)->iobase+((r)<<0))=(d))
 206#define SMC_outw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP16(d))
 207#define SMC_outw_nosw(a,d,r)    (*(volatile word *)((a)->iobase+((r)<<0))=(d))
 208#define SMC_outb(a,d,r) do{     word __d = (byte)(d);  \
 209                                word __w = SMC_inw((a),(r)&~1);  \
 210                                __w &= ((r)&1) ? 0x00FF : 0xFF00;  \
 211                                __w |= ((r)&1) ? __d<<8 : __d;  \
 212                                SMC_outw((a),__w,(r)&~1);  \
 213                        }while(0)
 214#define SMC_outsl(a,r,b,l)      do{     int __i; \
 215                                        dword *__b2; \
 216                                        __b2 = (dword *) b; \
 217                                        for (__i = 0; __i < l; __i++) { \
 218                                            SMC_outl_nosw((a), *(__b2 + __i), r); \
 219                                        } \
 220                                }while(0)
 221#define SMC_outsw(a,r,b,l)      do{     int __i; \
 222                                        word *__b2; \
 223                                        __b2 = (word *) b; \
 224                                        for (__i = 0; __i < l; __i++) { \
 225                                            SMC_outw_nosw((a), *(__b2 + __i), r); \
 226                                        } \
 227                                }while(0)
 228#define SMC_insl(a,r,b,l)       do{     int __i ;  \
 229                                        dword *__b2;  \
 230                                        __b2 = (dword *) b;  \
 231                                        for (__i = 0; __i < l; __i++) {  \
 232                                          *(__b2 + __i) = SMC_inl_nosw((a),(r));  \
 233                                        };  \
 234                                }while(0)
 235
 236#define SMC_insw(a,r,b,l)               do{     int __i ;  \
 237                                        word *__b2;  \
 238                                        __b2 = (word *) b;  \
 239                                        for (__i = 0; __i < l; __i++) {  \
 240                                          *(__b2 + __i) = SMC_inw_nosw((a),(r));  \
 241                                        };  \
 242                                }while(0)
 243
 244#define SMC_insb(a,r,b,l)               do{     int __i ;  \
 245                                        byte *__b2;  \
 246                                        __b2 = (byte *) b;  \
 247                                        for (__i = 0; __i < l; __i++) {  \
 248                                          *(__b2 + __i) = SMC_inb((a),(r));  \
 249                                        };  \
 250                                }while(0)
 251
 252#else                           /* if not CONFIG_PXA250 and not CONFIG_LEON */
 253
 254#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
 255/*
 256 * We have only 16 Bit PCMCIA access on Socket 0
 257 */
 258
 259#ifdef CONFIG_ADNPESC1
 260#define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+((r)<<1))))
 261#elif CONFIG_BLACKFIN
 262#define SMC_inw(a,r)    ({ word __v = (*((volatile word *)((a)->iobase+(r)))); SSYNC(); __v;})
 263#else
 264#define SMC_inw(a,r)    (*((volatile word *)((a)->iobase+(r))))
 265#endif
 266#define  SMC_inb(a,r)   (((r)&1) ? SMC_inw((a),(r)&~1)>>8 : SMC_inw((a),(r)&0xFF))
 267
 268#ifdef CONFIG_ADNPESC1
 269#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+((r)<<1))) = d)
 270#elif CONFIG_BLACKFIN
 271#define SMC_outw(a,d,r) {(*((volatile word *)((a)->iobase+(r))) = d); SSYNC();}
 272#else
 273#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
 274#endif
 275#define SMC_outb(a,d,r) ({      word __d = (byte)(d);  \
 276                                word __w = SMC_inw((a),(r)&~1);  \
 277                                __w &= ((r)&1) ? 0x00FF : 0xFF00;  \
 278                                __w |= ((r)&1) ? __d<<8 : __d;  \
 279                                SMC_outw((a),__w,(r)&~1);  \
 280                        })
 281#if 0
 282#define SMC_outsw(a,r,b,l)      outsw((a)->iobase+(r), (b), (l))
 283#else
 284#define SMC_outsw(a,r,b,l)      ({      int __i; \
 285                                        word *__b2; \
 286                                        __b2 = (word *) b; \
 287                                        for (__i = 0; __i < l; __i++) { \
 288                                            SMC_outw((a), *(__b2 + __i), r); \
 289                                        } \
 290                                })
 291#endif
 292
 293#if 0
 294#define SMC_insw(a,r,b,l)       insw((a)->iobase+(r), (b), (l))
 295#else
 296#define SMC_insw(a,r,b,l)       ({      int __i ;  \
 297                                        word *__b2;  \
 298                                        __b2 = (word *) b;  \
 299                                        for (__i = 0; __i < l; __i++) {  \
 300                                          *(__b2 + __i) = SMC_inw((a),(r));  \
 301                                          SMC_inw((a),0);  \
 302                                        };  \
 303                                })
 304#endif
 305
 306#endif  /* CONFIG_SMC_USE_IOFUNCS */
 307
 308#if defined(CONFIG_SMC_USE_32_BIT)
 309
 310#ifdef CONFIG_XSENGINE
 311#define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r<<1))))
 312#else
 313#define SMC_inl(a,r)    (*((volatile dword *)((a)->iobase+(r))))
 314#endif
 315
 316#define SMC_insl(a,r,b,l)       ({      int __i ;  \
 317                                        dword *__b2;  \
 318                                        __b2 = (dword *) b;  \
 319                                        for (__i = 0; __i < l; __i++) {  \
 320                                          *(__b2 + __i) = SMC_inl((a),(r));  \
 321                                          SMC_inl((a),0);  \
 322                                        };  \
 323                                })
 324
 325#ifdef CONFIG_XSENGINE
 326#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
 327#else
 328#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
 329#endif
 330#define SMC_outsl(a,r,b,l)      ({      int __i; \
 331                                        dword *__b2; \
 332                                        __b2 = (dword *) b; \
 333                                        for (__i = 0; __i < l; __i++) { \
 334                                            SMC_outl((a), *(__b2 + __i), r); \
 335                                        } \
 336                                })
 337
 338#endif /* CONFIG_SMC_USE_32_BIT */
 339
 340#endif
 341
 342/*---------------------------------------------------------------
 343 .
 344 . A description of the SMSC registers is probably in order here,
 345 . although for details, the SMC datasheet is invaluable.
 346 .
 347 . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
 348 . are accessed by writing a number into the BANK_SELECT register
 349 . ( I also use a SMC_SELECT_BANK macro for this ).
 350 .
 351 . The banks are configured so that for most purposes, bank 2 is all
 352 . that is needed for simple run time tasks.
 353 -----------------------------------------------------------------------*/
 354
 355/*
 356 . Bank Select Register:
 357 .
 358 .              yyyy yyyy 0000 00xx
 359 .              xx              = bank number
 360 .              yyyy yyyy       = 0x33, for identification purposes.
 361*/
 362#define BANK_SELECT             14
 363
 364/* Transmit Control Register */
 365/* BANK 0  */
 366#define TCR_REG         0x0000  /* transmit control register */
 367#define TCR_ENABLE      0x0001  /* When 1 we can transmit */
 368#define TCR_LOOP        0x0002  /* Controls output pin LBK */
 369#define TCR_FORCOL      0x0004  /* When 1 will force a collision */
 370#define TCR_PAD_EN      0x0080  /* When 1 will pad tx frames < 64 bytes w/0 */
 371#define TCR_NOCRC       0x0100  /* When 1 will not append CRC to tx frames */
 372#define TCR_MON_CSN     0x0400  /* When 1 tx monitors carrier */
 373#define TCR_FDUPLX      0x0800  /* When 1 enables full duplex operation */
 374#define TCR_STP_SQET    0x1000  /* When 1 stops tx if Signal Quality Error */
 375#define TCR_EPH_LOOP    0x2000  /* When 1 enables EPH block loopback */
 376#define TCR_SWFDUP      0x8000  /* When 1 enables Switched Full Duplex mode */
 377
 378#define TCR_CLEAR       0       /* do NOTHING */
 379/* the default settings for the TCR register : */
 380/* QUESTION: do I want to enable padding of short packets ? */
 381#define TCR_DEFAULT     TCR_ENABLE
 382
 383
 384/* EPH Status Register */
 385/* BANK 0  */
 386#define EPH_STATUS_REG  0x0002
 387#define ES_TX_SUC       0x0001  /* Last TX was successful */
 388#define ES_SNGL_COL     0x0002  /* Single collision detected for last tx */
 389#define ES_MUL_COL      0x0004  /* Multiple collisions detected for last tx */
 390#define ES_LTX_MULT     0x0008  /* Last tx was a multicast */
 391#define ES_16COL        0x0010  /* 16 Collisions Reached */
 392#define ES_SQET         0x0020  /* Signal Quality Error Test */
 393#define ES_LTXBRD       0x0040  /* Last tx was a broadcast */
 394#define ES_TXDEFR       0x0080  /* Transmit Deferred */
 395#define ES_LATCOL       0x0200  /* Late collision detected on last tx */
 396#define ES_LOSTCARR     0x0400  /* Lost Carrier Sense */
 397#define ES_EXC_DEF      0x0800  /* Excessive Deferral */
 398#define ES_CTR_ROL      0x1000  /* Counter Roll Over indication */
 399#define ES_LINK_OK      0x4000  /* Driven by inverted value of nLNK pin */
 400#define ES_TXUNRN       0x8000  /* Tx Underrun */
 401
 402
 403/* Receive Control Register */
 404/* BANK 0  */
 405#define RCR_REG         0x0004
 406#define RCR_RX_ABORT    0x0001  /* Set if a rx frame was aborted */
 407#define RCR_PRMS        0x0002  /* Enable promiscuous mode */
 408#define RCR_ALMUL       0x0004  /* When set accepts all multicast frames */
 409#define RCR_RXEN        0x0100  /* IFF this is set, we can receive packets */
 410#define RCR_STRIP_CRC   0x0200  /* When set strips CRC from rx packets */
 411#define RCR_ABORT_ENB   0x0200  /* When set will abort rx on collision */
 412#define RCR_FILT_CAR    0x0400  /* When set filters leading 12 bit s of carrier */
 413#define RCR_SOFTRST     0x8000  /* resets the chip */
 414
 415/* the normal settings for the RCR register : */
 416#define RCR_DEFAULT     (RCR_STRIP_CRC | RCR_RXEN)
 417#define RCR_CLEAR       0x0     /* set it to a base state */
 418
 419/* Counter Register */
 420/* BANK 0  */
 421#define COUNTER_REG     0x0006
 422
 423/* Memory Information Register */
 424/* BANK 0  */
 425#define MIR_REG         0x0008
 426
 427/* Receive/Phy Control Register */
 428/* BANK 0  */
 429#define RPC_REG         0x000A
 430#define RPC_SPEED       0x2000  /* When 1 PHY is in 100Mbps mode. */
 431#define RPC_DPLX        0x1000  /* When 1 PHY is in Full-Duplex Mode */
 432#define RPC_ANEG        0x0800  /* When 1 PHY is in Auto-Negotiate Mode */
 433#define RPC_LSXA_SHFT   5       /* Bits to shift LS2A,LS1A,LS0A to lsb */
 434#define RPC_LSXB_SHFT   2       /* Bits to get LS2B,LS1B,LS0B to lsb */
 435#define RPC_LED_100_10  (0x00)  /* LED = 100Mbps OR's with 10Mbps link detect */
 436#define RPC_LED_RES     (0x01)  /* LED = Reserved */
 437#define RPC_LED_10      (0x02)  /* LED = 10Mbps link detect */
 438#define RPC_LED_FD      (0x03)  /* LED = Full Duplex Mode */
 439#define RPC_LED_TX_RX   (0x04)  /* LED = TX or RX packet occurred */
 440#define RPC_LED_100     (0x05)  /* LED = 100Mbps link dectect */
 441#define RPC_LED_TX      (0x06)  /* LED = TX packet occurred */
 442#define RPC_LED_RX      (0x07)  /* LED = RX packet occurred */
 443#if defined(CONFIG_DK1C20) || defined(CONFIG_DK1S10)
 444/* buggy schematic: LEDa -> yellow, LEDb --> green */
 445#define RPC_DEFAULT     ( RPC_SPEED | RPC_DPLX | RPC_ANEG       \
 446                        | (RPC_LED_TX_RX << RPC_LSXA_SHFT)      \
 447                        | (RPC_LED_100_10 << RPC_LSXB_SHFT)     )
 448#elif defined(CONFIG_ADNPESC1)
 449/* SSV ADNP/ESC1 has only one LED: LEDa -> Rx/Tx indicator */
 450#define RPC_DEFAULT     ( RPC_SPEED | RPC_DPLX | RPC_ANEG       \
 451                        | (RPC_LED_TX_RX << RPC_LSXA_SHFT)      \
 452                        | (RPC_LED_100_10 << RPC_LSXB_SHFT)     )
 453#else
 454/* SMSC reference design: LEDa --> green, LEDb --> yellow */
 455#define RPC_DEFAULT     ( RPC_SPEED | RPC_DPLX | RPC_ANEG       \
 456                        | (RPC_LED_100_10 << RPC_LSXA_SHFT)     \
 457                        | (RPC_LED_TX_RX << RPC_LSXB_SHFT)      )
 458#endif
 459
 460/* Bank 0 0x000C is reserved */
 461
 462/* Bank Select Register */
 463/* All Banks */
 464#define BSR_REG 0x000E
 465
 466
 467/* Configuration Reg */
 468/* BANK 1 */
 469#define CONFIG_REG      0x0000
 470#define CONFIG_EXT_PHY  0x0200  /* 1=external MII, 0=internal Phy */
 471#define CONFIG_GPCNTRL  0x0400  /* Inverse value drives pin nCNTRL */
 472#define CONFIG_NO_WAIT  0x1000  /* When 1 no extra wait states on ISA bus */
 473#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
 474
 475/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
 476#define CONFIG_DEFAULT  (CONFIG_EPH_POWER_EN)
 477
 478
 479/* Base Address Register */
 480/* BANK 1 */
 481#define BASE_REG        0x0002
 482
 483
 484/* Individual Address Registers */
 485/* BANK 1 */
 486#define ADDR0_REG       0x0004
 487#define ADDR1_REG       0x0006
 488#define ADDR2_REG       0x0008
 489
 490
 491/* General Purpose Register */
 492/* BANK 1 */
 493#define GP_REG          0x000A
 494
 495
 496/* Control Register */
 497/* BANK 1 */
 498#define CTL_REG         0x000C
 499#define CTL_RCV_BAD     0x4000 /* When 1 bad CRC packets are received */
 500#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
 501#define CTL_LE_ENABLE   0x0080 /* When 1 enables Link Error interrupt */
 502#define CTL_CR_ENABLE   0x0040 /* When 1 enables Counter Rollover interrupt */
 503#define CTL_TE_ENABLE   0x0020 /* When 1 enables Transmit Error interrupt */
 504#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
 505#define CTL_RELOAD      0x0002 /* When set reads EEPROM into registers */
 506#define CTL_STORE       0x0001 /* When set stores registers into EEPROM */
 507#define CTL_DEFAULT     (0x1A10) /* Autorelease enabled*/
 508
 509/* MMU Command Register */
 510/* BANK 2 */
 511#define MMU_CMD_REG     0x0000
 512#define MC_BUSY         1       /* When 1 the last release has not completed */
 513#define MC_NOP          (0<<5)  /* No Op */
 514#define MC_ALLOC        (1<<5)  /* OR with number of 256 byte packets */
 515#define MC_RESET        (2<<5)  /* Reset MMU to initial state */
 516#define MC_REMOVE       (3<<5)  /* Remove the current rx packet */
 517#define MC_RELEASE      (4<<5)  /* Remove and release the current rx packet */
 518#define MC_FREEPKT      (5<<5)  /* Release packet in PNR register */
 519#define MC_ENQUEUE      (6<<5)  /* Enqueue the packet for transmit */
 520#define MC_RSTTXFIFO    (7<<5)  /* Reset the TX FIFOs */
 521
 522
 523/* Packet Number Register */
 524/* BANK 2 */
 525#define PN_REG          0x0002
 526
 527
 528/* Allocation Result Register */
 529/* BANK 2 */
 530#define AR_REG          0x0003
 531#define AR_FAILED       0x80    /* Alocation Failed */
 532
 533
 534/* RX FIFO Ports Register */
 535/* BANK 2 */
 536#define RXFIFO_REG      0x0004  /* Must be read as a word */
 537#define RXFIFO_REMPTY   0x8000  /* RX FIFO Empty */
 538
 539
 540/* TX FIFO Ports Register */
 541/* BANK 2 */
 542#define TXFIFO_REG      RXFIFO_REG      /* Must be read as a word */
 543#define TXFIFO_TEMPTY   0x80    /* TX FIFO Empty */
 544
 545
 546/* Pointer Register */
 547/* BANK 2 */
 548#define PTR_REG         0x0006
 549#define PTR_RCV         0x8000 /* 1=Receive area, 0=Transmit area */
 550#define PTR_AUTOINC     0x4000 /* Auto increment the pointer on each access */
 551#define PTR_READ        0x2000 /* When 1 the operation is a read */
 552#define PTR_NOTEMPTY    0x0800 /* When 1 _do not_ write fifo DATA REG */
 553
 554
 555/* Data Register */
 556/* BANK 2 */
 557#define SMC91111_DATA_REG       0x0008
 558
 559
 560/* Interrupt Status/Acknowledge Register */
 561/* BANK 2 */
 562#define SMC91111_INT_REG        0x000C
 563
 564
 565/* Interrupt Mask Register */
 566/* BANK 2 */
 567#define IM_REG          0x000D
 568#define IM_MDINT        0x80 /* PHY MI Register 18 Interrupt */
 569#define IM_ERCV_INT     0x40 /* Early Receive Interrupt */
 570#define IM_EPH_INT      0x20 /* Set by Etheret Protocol Handler section */
 571#define IM_RX_OVRN_INT  0x10 /* Set by Receiver Overruns */
 572#define IM_ALLOC_INT    0x08 /* Set when allocation request is completed */
 573#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */
 574#define IM_TX_INT       0x02 /* Transmit Interrrupt */
 575#define IM_RCV_INT      0x01 /* Receive Interrupt */
 576
 577
 578/* Multicast Table Registers */
 579/* BANK 3 */
 580#define MCAST_REG1      0x0000
 581#define MCAST_REG2      0x0002
 582#define MCAST_REG3      0x0004
 583#define MCAST_REG4      0x0006
 584
 585
 586/* Management Interface Register (MII) */
 587/* BANK 3 */
 588#define MII_REG         0x0008
 589#define MII_MSK_CRS100  0x4000 /* Disables CRS100 detection during tx half dup */
 590#define MII_MDOE        0x0008 /* MII Output Enable */
 591#define MII_MCLK        0x0004 /* MII Clock, pin MDCLK */
 592#define MII_MDI         0x0002 /* MII Input, pin MDI */
 593#define MII_MDO         0x0001 /* MII Output, pin MDO */
 594
 595
 596/* Revision Register */
 597/* BANK 3 */
 598#define REV_REG         0x000A /* ( hi: chip id   low: rev # ) */
 599
 600
 601/* Early RCV Register */
 602/* BANK 3 */
 603/* this is NOT on SMC9192 */
 604#define ERCV_REG        0x000C
 605#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */
 606#define ERCV_THRESHOLD  0x001F /* ERCV Threshold Mask */
 607
 608/* External Register */
 609/* BANK 7 */
 610#define EXT_REG         0x0000
 611
 612
 613#define CHIP_9192       3
 614#define CHIP_9194       4
 615#define CHIP_9195       5
 616#define CHIP_9196       6
 617#define CHIP_91100      7
 618#define CHIP_91100FD    8
 619#define CHIP_91111FD    9
 620
 621#if 0
 622static const char * chip_ids[ 15 ] =  {
 623        NULL, NULL, NULL,
 624        /* 3 */ "SMC91C90/91C92",
 625        /* 4 */ "SMC91C94",
 626        /* 5 */ "SMC91C95",
 627        /* 6 */ "SMC91C96",
 628        /* 7 */ "SMC91C100",
 629        /* 8 */ "SMC91C100FD",
 630        /* 9 */ "SMC91C111",
 631        NULL, NULL,
 632        NULL, NULL, NULL};
 633#endif
 634
 635/*
 636 . Transmit status bits
 637*/
 638#define TS_SUCCESS 0x0001
 639#define TS_LOSTCAR 0x0400
 640#define TS_LATCOL  0x0200
 641#define TS_16COL   0x0010
 642
 643/*
 644 . Receive status bits
 645*/
 646#define RS_ALGNERR      0x8000
 647#define RS_BRODCAST     0x4000
 648#define RS_BADCRC       0x2000
 649#define RS_ODDFRAME     0x1000  /* bug: the LAN91C111 never sets this on receive */
 650#define RS_TOOLONG      0x0800
 651#define RS_TOOSHORT     0x0400
 652#define RS_MULTICAST    0x0001
 653#define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
 654
 655
 656/* PHY Types */
 657enum {
 658        PHY_LAN83C183 = 1,      /* LAN91C111 Internal PHY */
 659        PHY_LAN83C180
 660};
 661
 662
 663/* PHY Register Addresses (LAN91C111 Internal PHY) */
 664
 665/* PHY Control Register */
 666#define PHY_CNTL_REG            0x00
 667#define PHY_CNTL_RST            0x8000  /* 1=PHY Reset */
 668#define PHY_CNTL_LPBK           0x4000  /* 1=PHY Loopback */
 669#define PHY_CNTL_SPEED          0x2000  /* 1=100Mbps, 0=10Mpbs */
 670#define PHY_CNTL_ANEG_EN        0x1000 /* 1=Enable Auto negotiation */
 671#define PHY_CNTL_PDN            0x0800  /* 1=PHY Power Down mode */
 672#define PHY_CNTL_MII_DIS        0x0400  /* 1=MII 4 bit interface disabled */
 673#define PHY_CNTL_ANEG_RST       0x0200 /* 1=Reset Auto negotiate */
 674#define PHY_CNTL_DPLX           0x0100  /* 1=Full Duplex, 0=Half Duplex */
 675#define PHY_CNTL_COLTST         0x0080  /* 1= MII Colision Test */
 676
 677/* PHY Status Register */
 678#define PHY_STAT_REG            0x01
 679#define PHY_STAT_CAP_T4         0x8000  /* 1=100Base-T4 capable */
 680#define PHY_STAT_CAP_TXF        0x4000  /* 1=100Base-X full duplex capable */
 681#define PHY_STAT_CAP_TXH        0x2000  /* 1=100Base-X half duplex capable */
 682#define PHY_STAT_CAP_TF         0x1000  /* 1=10Mbps full duplex capable */
 683#define PHY_STAT_CAP_TH         0x0800  /* 1=10Mbps half duplex capable */
 684#define PHY_STAT_CAP_SUPR       0x0040  /* 1=recv mgmt frames with not preamble */
 685#define PHY_STAT_ANEG_ACK       0x0020  /* 1=ANEG has completed */
 686#define PHY_STAT_REM_FLT        0x0010  /* 1=Remote Fault detected */
 687#define PHY_STAT_CAP_ANEG       0x0008  /* 1=Auto negotiate capable */
 688#define PHY_STAT_LINK           0x0004  /* 1=valid link */
 689#define PHY_STAT_JAB            0x0002  /* 1=10Mbps jabber condition */
 690#define PHY_STAT_EXREG          0x0001  /* 1=extended registers implemented */
 691
 692/* PHY Identifier Registers */
 693#define PHY_ID1_REG             0x02    /* PHY Identifier 1 */
 694#define PHY_ID2_REG             0x03    /* PHY Identifier 2 */
 695
 696/* PHY Auto-Negotiation Advertisement Register */
 697#define PHY_AD_REG              0x04
 698#define PHY_AD_NP               0x8000  /* 1=PHY requests exchange of Next Page */
 699#define PHY_AD_ACK              0x4000  /* 1=got link code word from remote */
 700#define PHY_AD_RF               0x2000  /* 1=advertise remote fault */
 701#define PHY_AD_T4               0x0200  /* 1=PHY is capable of 100Base-T4 */
 702#define PHY_AD_TX_FDX           0x0100  /* 1=PHY is capable of 100Base-TX FDPLX */
 703#define PHY_AD_TX_HDX           0x0080  /* 1=PHY is capable of 100Base-TX HDPLX */
 704#define PHY_AD_10_FDX           0x0040  /* 1=PHY is capable of 10Base-T FDPLX */
 705#define PHY_AD_10_HDX           0x0020  /* 1=PHY is capable of 10Base-T HDPLX */
 706#define PHY_AD_CSMA             0x0001  /* 1=PHY is capable of 802.3 CMSA */
 707
 708/* PHY Auto-negotiation Remote End Capability Register */
 709#define PHY_RMT_REG             0x05
 710/* Uses same bit definitions as PHY_AD_REG */
 711
 712/* PHY Configuration Register 1 */
 713#define PHY_CFG1_REG            0x10
 714#define PHY_CFG1_LNKDIS         0x8000  /* 1=Rx Link Detect Function disabled */
 715#define PHY_CFG1_XMTDIS         0x4000  /* 1=TP Transmitter Disabled */
 716#define PHY_CFG1_XMTPDN         0x2000  /* 1=TP Transmitter Powered Down */
 717#define PHY_CFG1_BYPSCR         0x0400  /* 1=Bypass scrambler/descrambler */
 718#define PHY_CFG1_UNSCDS         0x0200  /* 1=Unscramble Idle Reception Disable */
 719#define PHY_CFG1_EQLZR          0x0100  /* 1=Rx Equalizer Disabled */
 720#define PHY_CFG1_CABLE          0x0080  /* 1=STP(150ohm), 0=UTP(100ohm) */
 721#define PHY_CFG1_RLVL0          0x0040  /* 1=Rx Squelch level reduced by 4.5db */
 722#define PHY_CFG1_TLVL_SHIFT     2       /* Transmit Output Level Adjust */
 723#define PHY_CFG1_TLVL_MASK      0x003C
 724#define PHY_CFG1_TRF_MASK       0x0003  /* Transmitter Rise/Fall time */
 725
 726
 727/* PHY Configuration Register 2 */
 728#define PHY_CFG2_REG            0x11
 729#define PHY_CFG2_APOLDIS        0x0020  /* 1=Auto Polarity Correction disabled */
 730#define PHY_CFG2_JABDIS         0x0010  /* 1=Jabber disabled */
 731#define PHY_CFG2_MREG           0x0008  /* 1=Multiple register access (MII mgt) */
 732#define PHY_CFG2_INTMDIO        0x0004  /* 1=Interrupt signaled with MDIO pulseo */
 733
 734/* PHY Status Output (and Interrupt status) Register */
 735#define PHY_INT_REG             0x12    /* Status Output (Interrupt Status) */
 736#define PHY_INT_INT             0x8000  /* 1=bits have changed since last read */
 737#define PHY_INT_LNKFAIL         0x4000  /* 1=Link Not detected */
 738#define PHY_INT_LOSSSYNC        0x2000  /* 1=Descrambler has lost sync */
 739#define PHY_INT_CWRD            0x1000  /* 1=Invalid 4B5B code detected on rx */
 740#define PHY_INT_SSD             0x0800  /* 1=No Start Of Stream detected on rx */
 741#define PHY_INT_ESD             0x0400  /* 1=No End Of Stream detected on rx */
 742#define PHY_INT_RPOL            0x0200  /* 1=Reverse Polarity detected */
 743#define PHY_INT_JAB             0x0100  /* 1=Jabber detected */
 744#define PHY_INT_SPDDET          0x0080  /* 1=100Base-TX mode, 0=10Base-T mode */
 745#define PHY_INT_DPLXDET         0x0040  /* 1=Device in Full Duplex */
 746
 747/* PHY Interrupt/Status Mask Register */
 748#define PHY_MASK_REG            0x13    /* Interrupt Mask */
 749/* Uses the same bit definitions as PHY_INT_REG */
 750
 751
 752/*-------------------------------------------------------------------------
 753 .  I define some macros to make it easier to do somewhat common
 754 . or slightly complicated, repeated tasks.
 755 --------------------------------------------------------------------------*/
 756
 757/* select a register bank, 0 to 3  */
 758
 759#define SMC_SELECT_BANK(a,x)  { SMC_outw((a), (x), BANK_SELECT ); }
 760
 761/* this enables an interrupt in the interrupt mask register */
 762#define SMC_ENABLE_INT(a,x) {\
 763                unsigned char mask;\
 764                SMC_SELECT_BANK((a),2);\
 765                mask = SMC_inb((a), IM_REG );\
 766                mask |= (x);\
 767                SMC_outb( (a), mask, IM_REG ); \
 768}
 769
 770/* this disables an interrupt from the interrupt mask register */
 771
 772#define SMC_DISABLE_INT(a,x) {\
 773                unsigned char mask;\
 774                SMC_SELECT_BANK(2);\
 775                mask = SMC_inb( (a), IM_REG );\
 776                mask &= ~(x);\
 777                SMC_outb( (a), mask, IM_REG ); \
 778}
 779
 780/*----------------------------------------------------------------------
 781 . Define the interrupts that I want to receive from the card
 782 .
 783 . I want:
 784 .  IM_EPH_INT, for nasty errors
 785 .  IM_RCV_INT, for happy received packets
 786 .  IM_RX_OVRN_INT, because I have to kick the receiver
 787 .  IM_MDINT, for PHY Register 18 Status Changes
 788 --------------------------------------------------------------------------*/
 789#define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
 790        IM_MDINT)
 791
 792#endif  /* _SMC_91111_H_ */
 793