/*
 * (C) Copyright 2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 * The test exercises SDRAM accesses in burst mode
 */

#include <common.h>
#include <exports.h>

#include <commproc.h>
#include <asm/mmu.h>
#include <asm/processor.h>

#include <serial.h>
#include <watchdog.h>

#include "test_burst.h"

/* 8 MB test region of physical RAM */
#define TEST_PADDR      0x00800000
/* The uncached virtual region */
#define TEST_VADDR_NC   0x00800000
/* The cached virtual region */
#define TEST_VADDR_C    0x01000000
/* When an error is detected, the address where the error has been found,
   and also the current and the expected data will be written to
   the following flash address
*/
#define TEST_FLASH_ADDR 0x40100000

/* Define GPIO ports to signal start of burst transfers and errors */
#ifdef CONFIG_LWMON
/* Use PD.8 to signal start of burst transfers */
#define GPIO1_DAT       (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
#define GPIO1_BIT       0x0080
/* Configure PD.8 as general purpose output */
#define GPIO1_INIT \
        ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \
        ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |=  GPIO1_BIT;
/* Use PD.9 to signal error */
#define GPIO2_DAT       (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
#define GPIO2_BIT       0x0040
/* Configure PD.9 as general purpose output */
#define GPIO2_INIT \
        ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \
        ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |=  GPIO2_BIT;
#endif /* CONFIG_LWMON */


static void test_prepare (void);
static int test_burst_start (unsigned long size, unsigned long pattern);
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached);
static int test_mmu_is_on(void);
static void test_desc(unsigned long size);
static void test_error(char * step, volatile void * addr, unsigned long val, unsigned long pattern);
static void signal_init(void);
static void signal_start(void);
static void signal_error(void);
static void test_usage(void);

static unsigned long test_pattern [] = {
        0x00000000,
        0xffffffff,
        0x55555555,
        0xaaaaaaaa,
};


int test_burst (int argc, char *argv[])
{
        unsigned long size = CACHE_LINE_SIZE;
        unsigned int pass = 0;
        int res = 0;
        int i, j;

        if (argc == 3) {
                char * d;
                for (size = 0, d = argv[1]; *d >= '0' && *d <= '9'; d++) {
                        size *= 10;
                        size += *d - '0';
                }
                if (size == 0 || *d) {
                        test_usage();
                        return 1;
                }
                for (d = argv[2]; *d >= '0' && *d <= '9'; d++) {
                        pass *= 10;
                        pass += *d - '0';
                }
                if (*d) {
                        test_usage();
                        return 1;
                }
        } else if (argc > 3) {
                test_usage();
                return 1;
        }

        size +=  (CACHE_LINE_SIZE - 1);
        size &= ~(CACHE_LINE_SIZE - 1);

        if (!test_mmu_is_on()) {
                test_prepare();
        }

        test_desc(size);

        for (j = 0; !pass || j < pass; j++) {
                for (i = 0; i < sizeof(test_pattern) / sizeof(test_pattern[0]);
                     i++) {
                        res = test_burst_start(size, test_pattern[i]);
                        if (res != 0) {
                                goto Done;
                        }
                }

                printf ("Iteration #%d passed\n", j + 1);

                if (tstc() && 0x03 == getc())
                        break;
        }
Done:
        return res;
}

static void test_prepare (void)
{
        printf ("\n");

        caches_init();
        disable_interrupts();
        mmu_init();

        printf ("Interrupts are disabled\n");
        printf ("I-Cache is ON\n");
        printf ("D-Cache is ON\n");
        printf ("MMU is ON\n");

        printf ("\n");

        test_map_8M (TEST_PADDR, TEST_VADDR_NC, 0);
        test_map_8M (TEST_PADDR, TEST_VADDR_C,  1);

        test_map_8M (TEST_FLASH_ADDR & 0xFF800000, TEST_FLASH_ADDR & 0xFF800000, 0);

        /* Configure GPIO ports */
        signal_init();
}

static int test_burst_start (unsigned long size, unsigned long pattern)
{
        volatile unsigned long * vaddr_c = (unsigned long *)TEST_VADDR_C;
        volatile unsigned long * vaddr_nc = (unsigned long *)TEST_VADDR_NC;
        int i, n;
        int res = 1;

        printf ("Test pattern %08lx ...", pattern);

        n = size / 4;

        for (i = 0; i < n; i ++) {
                vaddr_c [i] = pattern;
        }
        signal_start();
        flush_dcache_range((unsigned long)vaddr_c, (unsigned long)(vaddr_c + n) - 1);

        for (i = 0; i < n; i ++) {
                register unsigned long tmp = vaddr_nc [i];
                if (tmp != pattern) {
                        test_error("2a", vaddr_nc + i, tmp, pattern);
                        goto Done;
                }
        }

        for (i = 0; i < n; i ++) {
                register unsigned long tmp = vaddr_c [i];
                if (tmp != pattern) {
                        test_error("2b", vaddr_c + i, tmp, pattern);
                        goto Done;
                }
        }

        for (i = 0; i < n; i ++) {
                vaddr_nc [i] = pattern;
        }

        for (i = 0; i < n; i ++) {
                register unsigned long tmp = vaddr_nc [i];
                if (tmp != pattern) {
                        test_error("3a", vaddr_nc + i, tmp, pattern);
                        goto Done;
                }
        }

        signal_start();
        for (i = 0; i < n; i ++) {
                register unsigned long tmp = vaddr_c [i];
                if (tmp != pattern) {
                        test_error("3b", vaddr_c + i, tmp, pattern);
                        goto Done;
                }
        }

        res = 0;
Done:
        printf(" %s\n", res == 0 ? "OK" : "");

        return res;
}

static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached)
{
        mtspr (MD_EPN, (vaddr & 0xFFFFFC00) | MI_EVALID);
        mtspr (MD_TWC, MI_PS8MEG | MI_SVALID);
        mtspr (MD_RPN, (paddr & 0xFFFFF000) | MI_BOOTINIT | (cached ? 0 : 2));
        mtspr (MD_AP, MI_Kp);
}

static int test_mmu_is_on(void)
{
        unsigned long msr;

        asm volatile("mfmsr %0" : "=r" (msr) :);

        return msr & MSR_DR;
}

static void test_desc(unsigned long size)
{
        printf(
        "The following tests will be conducted:\n"
        "1)  Map %ld-byte region of physical RAM at 0x%08x\n"
        "    into two virtual regions:\n"
        "    one cached at 0x%08x and\n"
        "    the the other uncached at 0x%08x.\n",
        size, TEST_PADDR, TEST_VADDR_NC, TEST_VADDR_C);

        puts(
        "2)  Fill the cached region with a pattern, and flush the cache\n"
        "2a) Check the uncached region to match the pattern\n"
        "2b) Check the cached region to match the pattern\n"
        "3)  Fill the uncached region with a pattern\n"
        "3a) Check the cached region to match the pattern\n"
        "3b) Check the uncached region to match the pattern\n"
        "2b) Change the patterns and go to step 2\n"
        "\n"
        );
}

static void test_error(
        char * step, volatile void * addr, unsigned long val, unsigned long pattern)
{
        volatile unsigned long * p = (void *)TEST_FLASH_ADDR;

        signal_error();

        p[0] = (unsigned long)addr;
        p[1] = val;
        p[2] = pattern;

        printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx",
                step, (unsigned long)addr, val, pattern);
}

static void signal_init(void)
{
#if defined(GPIO1_INIT)
        GPIO1_INIT;
#endif
#if defined(GPIO2_INIT)
        GPIO2_INIT;
#endif
}

static void signal_start(void)
{
#if defined(GPIO1_INIT)
        if (GPIO1_DAT & GPIO1_BIT) {
                GPIO1_DAT &= ~GPIO1_BIT;
        } else {
                GPIO1_DAT |= GPIO1_BIT;
        }
#endif
}

static void signal_error(void)
{
#if defined(GPIO2_INIT)
        if (GPIO2_DAT & GPIO2_BIT) {
                GPIO2_DAT &= ~GPIO2_BIT;
        } else {
                GPIO2_DAT |= GPIO2_BIT;
        }
#endif
}

static void test_usage(void)
{
        printf("Usage: go 0x40004 [size] [count]\n");
}