1/* 2 * Configuation settings for the Freescale M5271EVB 3 * 4 * Based on MC5272C3 and r5200 board configs 5 * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> 6 * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27/* 28 * board/config.h - configuration options, board specific 29 */ 30 31#ifndef _M5271EVB_H 32#define _M5271EVB_H 33 34/* 35 * High Level Configuration Options (easy to change) 36 */ 37#define CONFIG_MCF52x2 /* define processor family */ 38#define CONFIG_M5271 /* define processor type */ 39#define CONFIG_M5271EVB /* define board type */ 40 41#define CONFIG_MCFTMR 42 43#define CONFIG_MCFUART 44#define CONFIG_SYS_UART_PORT (0) 45#define CONFIG_BAUDRATE 115200 46#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 47 48#undef CONFIG_WATCHDOG /* disable watchdog */ 49 50/* Configuration for environment 51 * Environment is embedded in u-boot in the second sector of the flash 52 */ 53#ifndef CONFIG_MONITOR_IS_IN_RAM 54#define CONFIG_ENV_OFFSET 0x4000 55#else 56#define CONFIG_ENV_ADDR 0xffe04000 57#endif 58#define CONFIG_ENV_SECT_SIZE 0x2000 59#define CONFIG_ENV_IS_IN_FLASH 1 60#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ 61 62/* 63 * BOOTP options 64 */ 65#define CONFIG_BOOTP_BOOTFILESIZE 66#define CONFIG_BOOTP_BOOTPATH 67#define CONFIG_BOOTP_GATEWAY 68#define CONFIG_BOOTP_HOSTNAME 69 70/* 71 * Command line configuration. 72 */ 73#include <config_cmd_default.h> 74 75#define CONFIG_CMD_PING 76#define CONFIG_CMD_NET 77#define CONFIG_CMD_MII 78#define CONFIG_CMD_ELF 79#define CONFIG_CMD_FLASH 80#define CONFIG_CMD_I2C 81#define CONFIG_CMD_MEMORY 82#define CONFIG_CMD_MISC 83 84#undef CONFIG_CMD_LOADS 85#define CONFIG_CMD_LOADB 86#define CONFIG_CMDLINE_EDITING 1 /* enables command line history */ 87#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 88#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 89 90#define CONFIG_MCFFEC 91#ifdef CONFIG_MCFFEC 92# define CONFIG_NET_MULTI 1 93# define CONFIG_MII 1 94# define CONFIG_MII_INIT 1 95# define CONFIG_SYS_DISCOVER_PHY 96# define CONFIG_SYS_RX_ETH_BUFFER 8 97# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 98 99# define CONFIG_SYS_FEC0_PINMUX 0 100# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 101# define MCFFEC_TOUT_LOOP 50000 102/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 103# ifndef CONFIG_SYS_DISCOVER_PHY 104# define FECDUPLEX FULL 105# define FECSPEED _100BASET 106# else 107# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 108# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 109# endif 110# endif /* CONFIG_SYS_DISCOVER_PHY */ 111#endif 112 113/* I2C */ 114#define CONFIG_FSL_I2C 115#define CONFIG_HARD_I2C /* I2C with hw support */ 116#undef CONFIG_SOFT_I2C /* I2C bit-banged */ 117#define CONFIG_SYS_I2C_SPEED 80000 118#define CONFIG_SYS_I2C_SLAVE 0x7F 119#define CONFIG_SYS_I2C_OFFSET 0x00000300 120#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 121 122#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ 123#define CONFIG_BOOTFILE "u-boot.bin" 124#ifdef CONFIG_MCFFEC 125# define CONFIG_NET_RETRY_COUNT 5 126# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 127# define CONFIG_IPADDR 192.162.1.2 128# define CONFIG_NETMASK 255.255.255.0 129# define CONFIG_SERVERIP 192.162.1.1 130# define CONFIG_GATEWAYIP 192.162.1.1 131# define CONFIG_OVERWRITE_ETHADDR_ONCE 132#endif /* FEC_ENET */ 133 134#define CONFIG_HOSTNAME M5271EVB 135#define CONFIG_EXTRA_ENV_SETTINGS \ 136 "netdev=eth0\0" \ 137 "loadaddr=10000\0" \ 138 "uboot=u-boot.bin\0" \ 139 "load=tftp $loadaddr $uboot\0" \ 140 "upd=run load; run prog\0" \ 141 "prog=prot off ffe00000 ffe3ffff;" \ 142 "era ffe00000 ffe3ffff;" \ 143 "cp.b $loadaddr ffe00000 $filesize;" \ 144 "save\0" \ 145 "" 146 147#define CONFIG_SYS_PROMPT "=> " 148#define CONFIG_SYS_LONGHELP /* undef to save memory */ 149 150#if defined(CONFIG_CMD_KGDB) 151#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 152#else 153#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 154#endif 155#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 156#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 157#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 158 159#define CONFIG_SYS_LOAD_ADDR 0x00100000 160 161#define CONFIG_SYS_MEMTEST_START 0x400 162#define CONFIG_SYS_MEMTEST_END 0x380000 163 164#define CONFIG_SYS_HZ 1000000 165 166/* Clock configuration 167 * The external oscillator is a 25.000 MHz 168 * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk) 169 * bus_clk = (cpu_clk/2) (fixed ratio) 170 * 171 * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to 172 * match the new clock speed. Max cpu_clk is 150 MHz. 173 */ 174#define CONFIG_SYS_CLK 100000000 175#define CONFIG_SYS_MCF_SYNCR (MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1) 176 177/* 178 * Low Level Configuration Settings 179 * (address mappings, register initial values, etc.) 180 * You should know what you are doing if you make changes here. 181 */ 182 183#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */ 184 185/* 186 * Definitions for initial stack pointer and data area (in DPRAM) 187 */ 188#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 189#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ 190#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ 191#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 192#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 193 194/* 195 * Start addresses for the final memory configuration 196 * (Set up by the startup code) 197 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 198 */ 199#define CONFIG_SYS_SDRAM_BASE 0x00000000 200#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ 201#define CONFIG_SYS_FLASH_BASE 0xffe00000 202 203#ifdef CONFIG_MONITOR_IS_IN_RAM 204#define CONFIG_SYS_MONITOR_BASE 0x20000 205#else 206#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 207#endif 208 209#define CONFIG_SYS_MONITOR_LEN 0x40000 210#define CONFIG_SYS_MALLOC_LEN (256 << 10) 211#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) 212 213/* 214 * For booting Linux, the board info and command line data 215 * have to be in the first 8 MB of memory, since this is 216 * the maximum mapped by the Linux kernel during initialization ?? 217 */ 218#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 219 220/* FLASH organization */ 221#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 222#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ 223#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 224 225#define CONFIG_SYS_FLASH_CFI 1 226#define CONFIG_FLASH_CFI_DRIVER 1 227#define CONFIG_SYS_FLASH_SIZE 0x200000 228 229/* Cache Configuration */ 230#define CONFIG_SYS_CACHELINE_SIZE 16 231 232/* Chip Select 0 : Boot Flash */ 233#define CONFIG_SYS_CS0_BASE 0xFFE00000 234#define CONFIG_SYS_CS0_MASK 0x001F0001 235#define CONFIG_SYS_CS0_CTRL 0x00001980 236 237/* Chip Select 1 : External SRAM */ 238#define CONFIG_SYS_CS1_BASE 0x30000000 239#define CONFIG_SYS_CS1_MASK 0x00070001 240#define CONFIG_SYS_CS1_CTRL 0x00001900 241 242#endif /* _M5271EVB_H */ 243