1/* 2 * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23#include <common.h> 24#include <asm/processor.h> 25#include <spd_sdram.h> 26 27#define BOOT_SMALL_FLASH 32 /* 00100000 */ 28#define FLASH_ONBD_N 2 /* 00000010 */ 29#define FLASH_SRAM_SEL 1 /* 00000001 */ 30 31DECLARE_GLOBAL_DATA_PTR; 32 33long int fixed_sdram(void); 34 35int board_early_init_f(void) 36{ 37 uint reg; 38 unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE; 39 unsigned char status; 40 41 /*-------------------------------------------------------------------- 42 * Setup the external bus controller/chip selects 43 *-------------------------------------------------------------------*/ 44 mtdcr(EBC0_CFGADDR, EBC0_CFG); 45 reg = mfdcr(EBC0_CFGDATA); 46 mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ 47 48 mtebc(PB1AP, 0x02815480); /* NVRAM/RTC */ 49 mtebc(PB1CR, 0x48018000); /* BA=0x480 1MB R/W 8-bit */ 50 mtebc(PB7AP, 0x01015280); /* FPGA registers */ 51 mtebc(PB7CR, 0x48318000); /* BA=0x483 1MB R/W 8-bit */ 52 53 /* read FPGA_REG0 and set the bus controller */ 54 status = *fpga_base; 55 if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) { 56 mtebc(PB0AP, 0x9b015480); /* FLASH/SRAM */ 57 mtebc(PB0CR, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ 58 mtebc(PB2AP, 0x9b015480); /* 4MB FLASH */ 59 mtebc(PB2CR, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */ 60 } else { 61 mtebc(PB0AP, 0x9b015480); /* 4MB FLASH */ 62 mtebc(PB0CR, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */ 63 64 /* set CS2 if FLASH_ONBD_N == 0 */ 65 if (!(status & FLASH_ONBD_N)) { 66 mtebc(PB2AP, 0x9b015480); /* FLASH/SRAM */ 67 mtebc(PB2CR, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */ 68 } 69 } 70 71 /*-------------------------------------------------------------------- 72 * Setup the interrupt controller polarities, triggers, etc. 73 *-------------------------------------------------------------------*/ 74 mtdcr(UIC0SR, 0xffffffff); /* clear all */ 75 mtdcr(UIC0ER, 0x00000000); /* disable all */ 76 mtdcr(UIC0CR, 0x00000009); /* SMI & UIC1 crit are critical */ 77 mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ 78 mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ 79 mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ 80 mtdcr(UIC0SR, 0xffffffff); /* clear all */ 81 82 mtdcr(UIC1SR, 0xffffffff); /* clear all */ 83 mtdcr(UIC1ER, 0x00000000); /* disable all */ 84 mtdcr(UIC1CR, 0x00000000); /* all non-critical */ 85 mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ 86 mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ 87 mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ 88 mtdcr(UIC1SR, 0xffffffff); /* clear all */ 89 90 return 0; 91} 92 93int checkboard(void) 94{ 95 char *s = getenv("serial#"); 96 97 printf("Board: Ebony - AMCC PPC440GP Evaluation Board"); 98 if (s != NULL) { 99 puts(", serial# "); 100 puts(s); 101 } 102 putc('\n'); 103 104 return (0); 105} 106 107phys_size_t initdram(int board_type) 108{ 109 long dram_size = 0; 110 111#if defined(CONFIG_SPD_EEPROM) 112 dram_size = spd_sdram(); 113#else 114 dram_size = fixed_sdram(); 115#endif 116 return dram_size; 117} 118 119#if !defined(CONFIG_SPD_EEPROM) 120/************************************************************************* 121 * fixed sdram init -- doesn't use serial presence detect. 122 * 123 * Assumes: 128 MB, non-ECC, non-registered 124 * PLB @ 133 MHz 125 * 126 ************************************************************************/ 127long int fixed_sdram(void) 128{ 129 uint reg; 130 131 /*-------------------------------------------------------------------- 132 * Setup some default 133 *------------------------------------------------------------------*/ 134 mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ 135 mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ 136 mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ 137 mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ 138 mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ 139 140 /*-------------------------------------------------------------------- 141 * Setup for board-specific specific mem 142 *------------------------------------------------------------------*/ 143 /* 144 * Following for CAS Latency = 2.5 @ 133 MHz PLB 145 */ 146 mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ 147 mtsdram(SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ 148 /* RA=10 RD=3 */ 149 mtsdram(SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ 150 mtsdram(SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ 151 mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ 152 udelay(400); /* Delay 200 usecs (min) */ 153 154 /*-------------------------------------------------------------------- 155 * Enable the controller, then wait for DCEN to complete 156 *------------------------------------------------------------------*/ 157 mtsdram(SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ 158 for (;;) { 159 mfsdram(SDRAM0_MCSTS, reg); 160 if (reg & 0x80000000) 161 break; 162 } 163 164 return (128 * 1024 * 1024); /* 128 MB */ 165} 166#endif /* !defined(CONFIG_SPD_EEPROM) */ 167