/*
 * (C) Copyright 2003
 * DAVE Srl
 * http://www.dave-tech.it
 * http://www.wawnet.biz
 * mailto:info@wawnet.biz
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <asm/processor.h>
#include <command.h>
#include <malloc.h>

DECLARE_GLOBAL_DATA_PTR;

/* ------------------------------------------------------------------------- */

int board_early_init_f (void)
{
        out32(GPIO0_OR, CONFIG_SYS_NAND0_CE);                 /* set initial outputs     */
        out32(GPIO0_OR, CONFIG_SYS_NAND1_CE);                 /* set initial outputs     */

        /*
         * IRQ 0-15  405GP internally generated; active high; level sensitive
         * IRQ 16    405GP internally generated; active low; level sensitive
         * IRQ 17-24 RESERVED
         * IRQ 25 (EXT IRQ 0)
         * IRQ 26 (EXT IRQ 1)
         * IRQ 27 (EXT IRQ 2)
         * IRQ 28 (EXT IRQ 3)
         * IRQ 29 (EXT IRQ 4)
         * IRQ 30 (EXT IRQ 5)
         * IRQ 31 (EXT IRQ 6)
         */
        mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
        mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
        mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
        mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
        mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
        mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0,INT0 highest priority*/
        mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */

        /*
         * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
         */
#if 1 /* test-only */
        mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
#else
        mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */
#endif
        return 0;
}

/* ------------------------------------------------------------------------- */

int misc_init_f (void)
{
        return 0;  /* dummy implementation */
}

extern flash_info_t flash_info[];       /* info for FLASH chips */

int misc_init_r (void)
{
        /* adjust flash start and size as well as the offset */
        gd->bd->bi_flashstart = 0 - flash_info[0].size;
        gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
#if 0
        volatile unsigned short *fpga_mode =
                (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
        volatile unsigned char *duart0_mcr =
                (unsigned char *)((ulong)DUART0_BA + 4);
        volatile unsigned char *duart1_mcr =
                (unsigned char *)((ulong)DUART1_BA + 4);

        bd_t *bd = gd->bd;
        char *  tmp;                    /* Temporary char pointer      */
        unsigned char *dst;
        ulong len = sizeof(fpgadata);
        int status;
        int index;
        int i;
        unsigned long CPC0_CR0Reg;

        dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
        if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
                printf ("GUNZIP ERROR - must RESET board to recover\n");
                do_reset (NULL, 0, 0, NULL);
        }

        status = fpga_boot(dst, len);
        if (status != 0) {
                printf("\nFPGA: Booting failed ");
                switch (status) {
                case ERROR_FPGA_PRG_INIT_LOW:
                        printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
                        break;
                case ERROR_FPGA_PRG_INIT_HIGH:
                        printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
                        break;
                case ERROR_FPGA_PRG_DONE:
                        printf("(Timeout: DONE not high after programming FPGA)\n ");
                        break;
                }

                /* display infos on fpgaimage */
                index = 15;
                for (i=0; i<4; i++) {
                        len = dst[index];
                        printf("FPGA: %s\n", &(dst[index+1]));
                        index += len+3;
                }
                putc ('\n');
                /* delayed reboot */
                for (i=20; i>0; i--) {
                        printf("Rebooting in %2d seconds \r",i);
                        for (index=0;index<1000;index++)
                                udelay(1000);
                }
                putc ('\n');
                do_reset(NULL, 0, 0, NULL);
        }

        puts("FPGA:  ");

        /* display infos on fpgaimage */
        index = 15;
        for (i=0; i<4; i++) {
                len = dst[index];
                printf("%s ", &(dst[index+1]));
                index += len+3;
        }
        putc ('\n');

        free(dst);

        /*
         * Reset FPGA via FPGA_DATA pin
         */
        SET_FPGA(FPGA_PRG | FPGA_CLK);
        udelay(1000); /* wait 1ms */
        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
        udelay(1000); /* wait 1ms */
#endif

#if 0
        /*
         * Enable power on PS/2 interface
         */
        *fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;

        /*
         * Enable interrupts in exar duart mcr[3]
         */
        *duart0_mcr = 0x08;
        *duart1_mcr = 0x08;
#endif
        return (0);
}

/*
 * Check Board Identity:
 */

int checkboard (void)
{
        char str[64];
        int i = getenv_r ("serial#", str, sizeof(str));

        puts ("Board: ");

        if (i == -1) {
                puts ("### No HW ID - assuming PPChameleonEVB");
        } else {
                puts(str);
        }

        putc ('\n');

        return 0;
}

/* ------------------------------------------------------------------------- */

int testdram (void)
{
        /* TODO: XXX XXX XXX */
        printf ("test: 16 MB - ok\n");

        return (0);
}

/* ------------------------------------------------------------------------- */

#ifdef CONFIG_CFB_CONSOLE
# ifdef CONFIG_CONSOLE_EXTRA_INFO
# include <video_fb.h>
extern GraphicDevice smi;

void video_get_info_str (int line_number, char *info)
{
        uint pvr = get_pvr ();

        /* init video info strings for graphic console */
        switch (line_number) {
        case 1:
                switch (pvr) {
                case PVR_405EP_RB:
                        sprintf (info, " AMCC PowerPC 405EP Rev. B");
                        break;
                default:
                        sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
                        break;
                }
                return;
        case 2:
                sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it");
                return;
        case 3:
                sprintf (info, " %s", smi.modeIdent);
                return;
        }

        /* no more info lines */
        *info = 0;
        return;
}
# endif /* CONFIG_CONSOLE_EXTRA_INFO */
#endif  /* CONFIG_CFB_CONSOLE */