1/* 2 * Genericish driver for memory mapped NAND devices 3 * 4 * Copyright (c) 2006-2009 Analog Devices Inc. 5 * Licensed under the GPL-2 or later. 6 */ 7 8/* Your board must implement the following macros: 9 * NAND_PLAT_WRITE_CMD(chip, cmd) 10 * NAND_PLAT_WRITE_ADR(chip, cmd) 11 * NAND_PLAT_INIT() 12 * 13 * It may also implement the following: 14 * NAND_PLAT_DEV_READY(chip) 15 */ 16 17#include <common.h> 18#include <asm/io.h> 19 20#include <nand.h> 21 22static void plat_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) 23{ 24 struct nand_chip *this = mtd->priv; 25 26 if (cmd == NAND_CMD_NONE) 27 return; 28 29 if (ctrl & NAND_CLE) 30 NAND_PLAT_WRITE_CMD(this, cmd); 31 else 32 NAND_PLAT_WRITE_ADR(this, cmd); 33} 34 35#ifdef NAND_PLAT_DEV_READY 36static int plat_dev_ready(struct mtd_info *mtd) 37{ 38 return NAND_PLAT_DEV_READY((struct nand_chip *)mtd->priv); 39} 40#else 41# define plat_dev_ready NULL 42#endif 43 44int board_nand_init(struct nand_chip *nand) 45{ 46 NAND_PLAT_INIT(); 47 48 nand->cmd_ctrl = plat_cmd_ctrl; 49 nand->dev_ready = plat_dev_ready; 50 nand->ecc.mode = NAND_ECC_SOFT; 51 52 return 0; 53} 54