1/* 2 * See file CREDITS for list of people who contributed to this 3 * project. 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21#ifndef __LPD7A400_H_ 22#define __LPD7A400_H_ 23 24#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */ 25 26#undef CONFIG_USE_IRQ 27 28/* 29 * This board uses the logic LH7A400-10 card engine 30 */ 31#include <configs/lpd7a400-10.h> 32 33#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 34#define CONFIG_SETUP_MEMORY_TAGS 1 35#define CONFIG_INITRD_TAG 1 36 37/* 38 * Size of malloc() pool 39 */ 40#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) 41#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 42 43/* 44 * select serial console configuration 45 */ 46#define CONFIG_LH7A40X_SERIAL 47#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ 48 49/* allow to overwrite serial and ethaddr */ 50#define CONFIG_ENV_OVERWRITE 51 52#define CONFIG_BAUDRATE 115200 53#define CONFIG_IPADDR 192.168.1.100 54#define CONFIG_NETMASK 255.255.1.0 55#define CONFIG_SERVERIP 192.168.1.1 56 57#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ 58 59 60/* 61 * BOOTP options 62 */ 63#define CONFIG_BOOTP_BOOTFILESIZE 64#define CONFIG_BOOTP_BOOTPATH 65#define CONFIG_BOOTP_GATEWAY 66#define CONFIG_BOOTP_HOSTNAME 67 68 69/* 70 * Command line configuration. 71 */ 72#include <config_cmd_default.h> 73 74#ifndef USE_920T_MMU 75 #define CONFIG_CMD_PING 76 #undef CONFIG_CMD_CACHE 77#else 78 #define CONFIG_CMD_DATE 79#endif 80 81 82#define CONFIG_BOOTDELAY 3 83 84#if defined(CONFIG_CMD_KGDB) 85#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ 86/* what's this ? it's not used anywhere */ 87#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ 88#endif 89 90/* 91 * Miscellaneous configurable options 92 */ 93#define CONFIG_SYS_LONGHELP /* undef to save memory */ 94#define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */ 95#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 96#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 97#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 98#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 99 100#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ 101#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ 102 103#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */ 104 105/* valid baudrates */ 106#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 107 108/* size and location of u-boot in flash */ 109#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 110#define CONFIG_SYS_MONITOR_LEN (256<<10) 111 112#define CONFIG_ENV_IS_IN_FLASH 1 113 114/* Address and size of Primary Environment Sector */ 115#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000) 116#define CONFIG_ENV_SIZE 0x40000 117 118#endif /* __LPD7A400_H_ */ 119