/*
 * (C) Copyright 2002
 * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/* #define DEBUG */

#include <common.h>
#include <netdev.h>
#include <malloc.h>
#include <asm/arch/s3c24x0_cpu.h>
#include <command.h>

DECLARE_GLOBAL_DATA_PTR;

#ifdef CONFIG_SYS_BRIGHTNESS
static void spi_init(void);
static void wait_transmit_done(void);
static void tsc2000_write(unsigned int page, unsigned int reg,
                                                  unsigned int data);
static void tsc2000_set_brightness(void);
#endif
#ifdef CONFIG_MODEM_SUPPORT
static int key_pressed(void);
extern void disable_putc(void);
extern int do_mdm_init; /* defined in common/main.c */

/*
 * We need a delay of at least 500 us after turning on the VFD clock
 * before we can read any useful information for the CPLD controlling
 * the keyboard switches. Let's play safe and wait 5 ms. The problem
 * is that timers are not available yet, so we use a manually timed
 * loop.
 */
#define KBD_MDELAY      5000
static void udelay_no_timer (int usec)
{
        int i;
        int delay = usec * 3;

        for (i = 0; i < delay; i ++) gd->bd->bi_arch_number = MACH_TYPE_TRAB;
}
#endif /* CONFIG_MODEM_SUPPORT */

/*
 * Miscellaneous platform dependent initialisations
 */

int board_init ()
{
#if defined(CONFIG_VFD)
        extern int vfd_init_clocks(void);
#endif
        struct s3c24x0_clock_power * const clk_power =
                                        s3c24x0_get_base_clock_power();
        struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();

        /* memory and cpu-speed are setup before relocation */
#ifdef CONFIG_TRAB_50MHZ
        /* change the clock to be 50 MHz 1:1:1 */
        /* MDIV:0x5c PDIV:4 SDIV:2 */
        clk_power->MPLLCON = 0x5c042;
        clk_power->CLKDIVN = 0;
#else
        /* change the clock to be 133 MHz 1:2:4 */
        /* MDIV:0x7d PDIV:4 SDIV:1 */
        clk_power->MPLLCON = 0x7d041;
        clk_power->CLKDIVN = 3;
#endif

        /* set up the I/O ports */
        gpio->PACON = 0x3ffff;
        gpio->PBCON = 0xaaaaaaaa;
        gpio->PBUP  = 0xffff;
        /* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0]        */
        /*  00,    10,      10,      10,      10,      10,      10      */
        gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
#ifdef CONFIG_HWFLOW
        /* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */
        gpio->PFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
#else
        /* do not pull up RXD0, RXD1, TXD0, TXD1 */
        gpio->PFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3);
#endif
        gpio->PGCON = 0x0;
        gpio->PGUP  = 0x0;
        gpio->OPENCR= 0x0;

        /* suppress flicker of the VFDs */
        gpio->MISCCR = 0x40;
        gpio->PFCON |= (2<<12);

        gd->bd->bi_arch_number = MACH_TYPE_TRAB;

        /* adress of boot parameters */
        gd->bd->bi_boot_params = 0x0c000100;

        /* Make sure both buzzers are turned off */
        gpio->PDCON |= 0x5400;
        gpio->PDDAT &= ~0xE0;

#ifdef CONFIG_VFD
        vfd_init_clocks();
#endif /* CONFIG_VFD */

#ifdef CONFIG_MODEM_SUPPORT
        udelay_no_timer (KBD_MDELAY);

        if (key_pressed()) {
                disable_putc(); /* modem doesn't understand banner etc */
                do_mdm_init = 1;
        }
#endif  /* CONFIG_MODEM_SUPPORT */

#ifdef CONFIG_DRIVER_S3C24X0_I2C
        /* Configure I/O ports PG5 und PG6 for I2C */
        gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00;
#endif /* CONFIG_DRIVER_S3C24X0_I2C */

        return 0;
}

int dram_init (void)
{
        gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
        gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
        return 0;
}

/*-----------------------------------------------------------------------
 * Keyboard Controller
 */

/* Maximum key number */
#define KEYBD_KEY_NUM           4

#define KBD_DATA        (((*(volatile ulong *)0x04020000) >> 16) & 0xF)

static char *key_match (ulong);

int misc_init_r (void)
{
        ulong kbd_data = KBD_DATA;
        char *str;
        char keybd_env[KEYBD_KEY_NUM + 1];
        int i;

#ifdef CONFIG_VERSION_VARIABLE
        {
                /* Set version variable. Please note, that this variable is
                 * also set in main_loop() later in the boot process. The
                 * version variable has to be set this early, because so it
                 * could be used in script files on an usb stick, which
                 * might be called during do_auto_update() */
                extern char version_string[];

                setenv ("ver", version_string);
        }
#endif /* CONFIG_VERSION_VARIABLE */

#ifdef CONFIG_AUTO_UPDATE
        {
                extern int do_auto_update(void);
                /* this has priority over all else */
                do_auto_update();
        }
#endif

        for (i = 0; i < KEYBD_KEY_NUM; ++i) {
                keybd_env[i] = '0' + ((kbd_data >> i) & 1);
        }
        keybd_env[i] = '\0';
        debug ("** Setting keybd=\"%s\"\n", keybd_env);
        setenv ("keybd", keybd_env);

        str = strdup (key_match (kbd_data));    /* decode keys */

#ifdef CONFIG_PREBOOT   /* automatically configure "preboot" command on key match */
        debug ("** Setting preboot=\"%s\"\n", str);
        setenv ("preboot", str);        /* set or delete definition */
#endif /* CONFIG_PREBOOT */
        if (str != NULL) {
                free (str);
        }

#ifdef CONFIG_SYS_BRIGHTNESS
        tsc2000_set_brightness();
#endif
        return (0);
}

#ifdef CONFIG_PREBOOT

static uchar kbd_magic_prefix[] = "key_magic";
static uchar kbd_command_prefix[] = "key_cmd";

static int compare_magic (ulong kbd_data, char *str)
{
        uchar key_mask;

        debug ("compare_magic: kbd: %04lx  str: \"%s\"\n",kbd_data,str);
        for (; *str; str++)
        {
                uchar c = *str - '1';

                if (c >= KEYBD_KEY_NUM)         /* bad key number */
                        return -1;

                key_mask = 1 << c;

                if (!(kbd_data & key_mask)) {   /* key not pressed */
                        debug ( "compare_magic: "
                                "kbd: %04lx mask: %04lx - key not pressed\n",
                                kbd_data, key_mask );
                        return -1;
                }

                kbd_data &= ~key_mask;
        }

        if (kbd_data) {                         /* key(s) not released */
                debug ( "compare_magic: "
                        "kbd: %04lx - key(s) not released\n", kbd_data);
                return -1;
        }

        return 0;
}

/*-----------------------------------------------------------------------
 * Check if pressed key(s) match magic sequence,
 * and return the command string associated with that key(s).
 *
 * If no key press was decoded, NULL is returned.
 *
 * Note: the first character of the argument will be overwritten with
 * the "magic charcter code" of the decoded key(s), or '\0'.
 *
 *
 * Note: the string points to static environment data and must be
 * saved before you call any function that modifies the environment.
 */
static char *key_match (ulong kbd_data)
{
        char magic[sizeof (kbd_magic_prefix) + 1];
        char cmd_name[sizeof (kbd_command_prefix) + 1];
        char *suffix;
        char *kbd_magic_keys;

        /*
         * The following string defines the characters that can pe appended
         * to "key_magic" to form the names of environment variables that
         * hold "magic" key codes, i. e. such key codes that can cause
         * pre-boot actions. If the string is empty (""), then only
         * "key_magic" is checked (old behaviour); the string "125" causes
         * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
         */
        if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
                kbd_magic_keys = "";

        debug ("key_match: magic_keys=\"%s\"\n", kbd_magic_keys);

        /* loop over all magic keys;
         * use '\0' suffix in case of empty string
         */
        for (suffix=kbd_magic_keys; *suffix || suffix==kbd_magic_keys; ++suffix)
        {
                sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);

                debug ("key_match: magic=\"%s\"\n",
                        getenv(magic) ? getenv(magic) : "<UNDEFINED>");

                if (compare_magic(kbd_data, getenv(magic)) == 0)
                {
                        sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
                        debug ("key_match: cmdname %s=\"%s\"\n",
                                cmd_name,
                                getenv (cmd_name) ?
                                        getenv (cmd_name) :
                                        "<UNDEFINED>");
                        return (getenv (cmd_name));
                }
        }
        debug ("key_match: no match\n");
        return (NULL);
}
#endif                                                  /* CONFIG_PREBOOT */

/* Read Keyboard status */
int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
        ulong kbd_data = KBD_DATA;
        char keybd_env[KEYBD_KEY_NUM + 1];
        int i;

        puts ("Keys:");
        for (i = 0; i < KEYBD_KEY_NUM; ++i) {
                keybd_env[i] = '0' + ((kbd_data >> i) & 1);
                printf (" %c", keybd_env[i]);
        }
        keybd_env[i] = '\0';
        putc ('\n');
        setenv ("keybd", keybd_env);
        return 0;
}

U_BOOT_CMD(
        kbd,    1,      1,      do_kbd,
        "read keyboard status",
        ""
);

#ifdef CONFIG_MODEM_SUPPORT
static int key_pressed(void)
{
        return (compare_magic(KBD_DATA, CONFIG_MODEM_KEY_MAGIC) == 0);
}
#endif  /* CONFIG_MODEM_SUPPORT */

#ifdef CONFIG_SYS_BRIGHTNESS

static inline void SET_CS_TOUCH(void)
{
        struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();

        gpio->PDDAT &= 0x5FF;
}

static inline void CLR_CS_TOUCH(void)
{
        struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();

        gpio->PDDAT |= 0x200;
}

static void spi_init(void)
{
        struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
        struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
        int i;

        /* Configure I/O ports. */
        gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
        gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
        gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
        gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;

        CLR_CS_TOUCH();

        spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */
        spi->ch[0].SPPIN = 0x01;  /* SPI-MOSI holds Level after last bit */
        spi->ch[0].SPCON = 0x1A;  /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */

        /* Dummy byte ensures clock to be low. */
        for (i = 0; i < 10; i++) {
                spi->ch[0].SPTDAT = 0xFF;
        }
        wait_transmit_done();
}

static void wait_transmit_done(void)
{
        struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();

        while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
}

static void tsc2000_write(unsigned int page, unsigned int reg,
                                                  unsigned int data)
{
        struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
        unsigned int command;

        SET_CS_TOUCH();
        command = 0x0000;
        command |= (page << 11);
        command |= (reg << 5);

        spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
        wait_transmit_done();
        spi->ch[0].SPTDAT = (command & 0x00FF);
        wait_transmit_done();
        spi->ch[0].SPTDAT = (data & 0xFF00) >> 8;
        wait_transmit_done();
        spi->ch[0].SPTDAT = (data & 0x00FF);
        wait_transmit_done();

        CLR_CS_TOUCH();
}

static void tsc2000_set_brightness(void)
{
        char tmp[10];
        int i, br;

        spi_init();
        tsc2000_write(1, 2, 0x0); /* Power up DAC */

        i = getenv_f("brightness", tmp, sizeof(tmp));
        br = (i > 0)
                ? (int) simple_strtoul (tmp, NULL, 10)
                : CONFIG_SYS_BRIGHTNESS;

        tsc2000_write(0, 0xb, br & 0xff);
}
#endif

#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
        int rc = 0;
#ifdef CONFIG_CS8900
        rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
        return rc;
}
#endif