1/* 2 * (C) Copyright 2009 3 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24#ifndef __SPR_UDC_H 25#define __SPR_UDC_H 26 27/* 28 * Defines for USBD 29 * 30 * The udc_ahb controller has three AHB slaves: 31 * 32 * 1. THe UDC registers 33 * 2. The plug detect 34 * 3. The RX/TX FIFO 35 */ 36 37#define MAX_ENDPOINTS 16 38 39struct udc_endp_regs { 40 u32 endp_cntl; 41 u32 endp_status; 42 u32 endp_bsorfn; 43 u32 endp_maxpacksize; 44 u32 reserved_1; 45 u32 endp_desc_point; 46 u32 reserved_2; 47 u32 write_done; 48}; 49 50/* Endpoint Control Register definitions */ 51 52#define ENDP_CNTL_STALL 0x00000001 53#define ENDP_CNTL_FLUSH 0x00000002 54#define ENDP_CNTL_SNOOP 0x00000004 55#define ENDP_CNTL_POLL 0x00000008 56#define ENDP_CNTL_CONTROL 0x00000000 57#define ENDP_CNTL_ISO 0x00000010 58#define ENDP_CNTL_BULK 0x00000020 59#define ENDP_CNTL_INT 0x00000030 60#define ENDP_CNTL_NAK 0x00000040 61#define ENDP_CNTL_SNAK 0x00000080 62#define ENDP_CNTL_CNAK 0x00000100 63#define ENDP_CNTL_RRDY 0x00000200 64 65/* Endpoint Satus Register definitions */ 66 67#define ENDP_STATUS_PIDMSK 0x0000000f 68#define ENDP_STATUS_OUTMSK 0x00000030 69#define ENDP_STATUS_OUT_NONE 0x00000000 70#define ENDP_STATUS_OUT_DATA 0x00000010 71#define ENDP_STATUS_OUT_SETUP 0x00000020 72#define ENDP_STATUS_IN 0x00000040 73#define ENDP_STATUS_BUFFNAV 0x00000080 74#define ENDP_STATUS_FATERR 0x00000100 75#define ENDP_STATUS_HOSTBUSERR 0x00000200 76#define ENDP_STATUS_TDC 0x00000400 77#define ENDP_STATUS_RXPKTMSK 0x003ff800 78 79struct udc_regs { 80 struct udc_endp_regs in_regs[MAX_ENDPOINTS]; 81 struct udc_endp_regs out_regs[MAX_ENDPOINTS]; 82 u32 dev_conf; 83 u32 dev_cntl; 84 u32 dev_stat; 85 u32 dev_int; 86 u32 dev_int_mask; 87 u32 endp_int; 88 u32 endp_int_mask; 89 u32 reserved_3[0x39]; 90 u32 reserved_4; /* offset 0x500 */ 91 u32 udc_endp_reg[MAX_ENDPOINTS]; 92}; 93 94/* Device Configuration Register definitions */ 95 96#define DEV_CONF_HS_SPEED 0x00000000 97#define DEV_CONF_LS_SPEED 0x00000002 98#define DEV_CONF_FS_SPEED 0x00000003 99#define DEV_CONF_REMWAKEUP 0x00000004 100#define DEV_CONF_SELFPOW 0x00000008 101#define DEV_CONF_SYNCFRAME 0x00000010 102#define DEV_CONF_PHYINT_8 0x00000020 103#define DEV_CONF_PHYINT_16 0x00000000 104#define DEV_CONF_UTMI_BIDIR 0x00000040 105#define DEV_CONF_STATUS_STALL 0x00000080 106 107/* Device Control Register definitions */ 108 109#define DEV_CNTL_RESUME 0x00000001 110#define DEV_CNTL_TFFLUSH 0x00000002 111#define DEV_CNTL_RXDMAEN 0x00000004 112#define DEV_CNTL_TXDMAEN 0x00000008 113#define DEV_CNTL_DESCRUPD 0x00000010 114#define DEV_CNTL_BIGEND 0x00000020 115#define DEV_CNTL_BUFFILL 0x00000040 116#define DEV_CNTL_TSHLDEN 0x00000080 117#define DEV_CNTL_BURSTEN 0x00000100 118#define DEV_CNTL_DMAMODE 0x00000200 119#define DEV_CNTL_SOFTDISCONNECT 0x00000400 120#define DEV_CNTL_SCALEDOWN 0x00000800 121#define DEV_CNTL_BURSTLENU 0x00010000 122#define DEV_CNTL_BURSTLENMSK 0x00ff0000 123#define DEV_CNTL_TSHLDLENU 0x01000000 124#define DEV_CNTL_TSHLDLENMSK 0xff000000 125 126/* Device Status Register definitions */ 127 128#define DEV_STAT_CFG 0x0000000f 129#define DEV_STAT_INTF 0x000000f0 130#define DEV_STAT_ALT 0x00000f00 131#define DEV_STAT_SUSP 0x00001000 132#define DEV_STAT_ENUM 0x00006000 133#define DEV_STAT_ENUM_SPEED_HS 0x00000000 134#define DEV_STAT_ENUM_SPEED_FS 0x00002000 135#define DEV_STAT_ENUM_SPEED_LS 0x00004000 136#define DEV_STAT_RXFIFO_EMPTY 0x00008000 137#define DEV_STAT_PHY_ERR 0x00010000 138#define DEV_STAT_TS 0xf0000000 139 140/* Device Interrupt Register definitions */ 141 142#define DEV_INT_MSK 0x0000007f 143#define DEV_INT_SETCFG 0x00000001 144#define DEV_INT_SETINTF 0x00000002 145#define DEV_INT_INACTIVE 0x00000004 146#define DEV_INT_USBRESET 0x00000008 147#define DEV_INT_SUSPUSB 0x00000010 148#define DEV_INT_SOF 0x00000020 149#define DEV_INT_ENUM 0x00000040 150 151/* Endpoint Interrupt Register definitions */ 152 153#define ENDP0_INT_CTRLIN 0x00000001 154#define ENDP1_INT_BULKIN 0x00000002 155#define ENDP_INT_NONISOIN_MSK 0x0000AAAA 156#define ENDP2_INT_BULKIN 0x00000004 157#define ENDP0_INT_CTRLOUT 0x00010000 158#define ENDP1_INT_BULKOUT 0x00020000 159#define ENDP2_INT_BULKOUT 0x00040000 160#define ENDP_INT_NONISOOUT_MSK 0x55540000 161 162/* Endpoint Register definitions */ 163#define ENDP_EPDIR_OUT 0x00000000 164#define ENDP_EPDIR_IN 0x00000010 165#define ENDP_EPTYPE_CNTL 0x0 166#define ENDP_EPTYPE_ISO 0x1 167#define ENDP_EPTYPE_BULK 0x2 168#define ENDP_EPTYPE_INT 0x3 169 170/* 171 * Defines for Plug Detect 172 */ 173 174struct plug_regs { 175 u32 plug_state; 176 u32 plug_pending; 177}; 178 179/* Plug State Register definitions */ 180#define PLUG_STATUS_EN 0x1 181#define PLUG_STATUS_ATTACHED 0x2 182#define PLUG_STATUS_PHY_RESET 0x4 183#define PLUG_STATUS_PHY_MODE 0x8 184 185/* 186 * Defines for UDC FIFO (Slave Mode) 187 */ 188struct udcfifo_regs { 189 u32 *fifo_p; 190}; 191 192/* 193 * USBTTY definitions 194 */ 195#define EP0_MAX_PACKET_SIZE 64 196#define UDC_INT_ENDPOINT 1 197#define UDC_INT_PACKET_SIZE 64 198#define UDC_OUT_ENDPOINT 2 199#define UDC_BULK_PACKET_SIZE 64 200#define UDC_IN_ENDPOINT 3 201#define UDC_OUT_PACKET_SIZE 64 202#define UDC_IN_PACKET_SIZE 64 203 204/* 205 * UDC endpoint definitions 206 */ 207#define UDC_EP0 0 208#define UDC_EP1 1 209#define UDC_EP2 2 210#define UDC_EP3 3 211 212/* 213 * Function declarations 214 */ 215 216void udc_irq(void); 217 218void udc_set_nak(int epid); 219void udc_unset_nak(int epid); 220int udc_endpoint_write(struct usb_endpoint_instance *endpoint); 221int udc_init(void); 222void udc_enable(struct usb_device_instance *device); 223void udc_disable(void); 224void udc_connect(void); 225void udc_disconnect(void); 226void udc_startup_events(struct usb_device_instance *device); 227void udc_setup_ep(struct usb_device_instance *device, unsigned int ep, 228 struct usb_endpoint_instance *endpoint); 229 230#endif /* __SPR_UDC_H */ 231