LXR uboot/board/freescale/mpc8610hpcd/ddr.c

   1/*
   2 * Copyright 2008 Freescale Semiconductor, Inc.
   3 *
   4 * This program is free software; you can redistribute it and/or
   5 * modify it under the terms of the GNU General Public License
   6 * Version 2 as published by the Free Software Foundation.
   7 */
   8
   9#include <common.h>
  10
  11#include <asm/fsl_ddr_sdram.h>
  12#include <asm/fsl_ddr_dimm_params.h>
  13
  14void fsl_ddr_board_options(memctl_options_t *popts,
  15                                dimm_params_t *pdimm,
  16                                unsigned int ctrl_num)
  17{
  18        /*
  19         * Factors to consider for clock adjust:
  20         *      - number of chips on bus
  21         *      - position of slot
  22         *      - DDR1 vs. DDR2?
  23         *      - ???
  24         *
  25         * This needs to be determined on a board-by-board basis.
  26         *      0110    3/4 cycle late
  27         *      0111    7/8 cycle late
  28         */
  29        popts->clk_adjust = 7;
  30
  31        /*
  32         * Factors to consider for CPO:
  33         *      - frequency
  34         *      - ddr1 vs. ddr2
  35         */
  36        popts->cpo_override = 10;
  37
  38        /*
  39         * Factors to consider for write data delay:
  40         *      - number of DIMMs
  41         *
  42         * 1 = 1/4 clock delay
  43         * 2 = 1/2 clock delay
  44         * 3 = 3/4 clock delay
  45         * 4 = 1   clock delay
  46         * 5 = 5/4 clock delay
  47         * 6 = 3/2 clock delay
  48         */
  49        popts->write_data_delay = 3;
  50
  51        /* 2T timing enable */
  52        popts->twoT_en = 1;
  53
  54        /*
  55         * Factors to consider for half-strength driver enable:
  56         *      - number of DIMMs installed
  57         */
  58        popts->half_strength_driver_enable = 0;
  59}
  60