1/* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * (C) Copyright 2010 5 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25/* 26 * ve8313 board configuration file 27 */ 28 29#ifndef __CONFIG_H 30#define __CONFIG_H 31 32/* 33 * High Level Configuration Options 34 */ 35#define CONFIG_E300 1 36#define CONFIG_MPC83xx 1 37#define CONFIG_MPC831x 1 38#define CONFIG_MPC8313 1 39#define CONFIG_VE8313 1 40 41#ifndef CONFIG_SYS_TEXT_BASE 42#define CONFIG_SYS_TEXT_BASE 0xfe000000 43#endif 44 45#define CONFIG_PCI 1 46#define CONFIG_FSL_ELBC 1 47 48#define CONFIG_BOARD_EARLY_INIT_F 1 49 50/* 51 * On-board devices 52 * 53 */ 54#define CONFIG_83XX_CLKIN 32000000 /* in Hz */ 55 56#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN 57 58#define CONFIG_SYS_IMMR 0xE0000000 59 60#define CONFIG_SYS_MEMTEST_START 0x00001000 61#define CONFIG_SYS_MEMTEST_END 0x07000000 62 63#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */ 64#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */ 65 66/* 67 * Device configurations 68 */ 69 70/* 71 * DDR Setup 72 */ 73#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 74#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 75#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 76 77/* 78 * Manually set up DDR parameters, as this board does not 79 * have the SPD connected to I2C. 80 */ 81#define CONFIG_SYS_DDR_SIZE 128 /* MB */ 82#define CONFIG_SYS_DDR_CONFIG ( CSCONFIG_EN \ 83 | CSCONFIG_AP \ 84 | 0x00040000 /* TODO */ \ 85 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) 86 /* 0x80840102 */ 87 88#define CONFIG_SYS_DDR_TIMING_3 0x00000000 89#define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ 90 | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ 91 | ( 3 << TIMING_CFG0_RRT_SHIFT ) \ 92 | ( 2 << TIMING_CFG0_WWT_SHIFT ) \ 93 | ( 7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ 94 | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ 95 | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ 96 | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) 97 /* 0x0e720802 */ 98#define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \ 99 | ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ 100 | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \ 101 | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ 102 | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \ 103 | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \ 104 | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ 105 | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) 106 /* 0x26256222 */ 107#define CONFIG_SYS_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ 108 | ( 5 << TIMING_CFG2_CPO_SHIFT ) \ 109 | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ 110 | ( 1 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ 111 | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ 112 | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ 113 | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) ) 114 /* 0x029028c7 */ 115#define CONFIG_SYS_DDR_INTERVAL ( ( 0x320 << SDRAM_INTERVAL_REFINT_SHIFT ) \ 116 | ( 0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) 117 /* 0x03202000 */ 118#define CONFIG_SYS_SDRAM_CFG ( SDRAM_CFG_SREN \ 119 | SDRAM_CFG_SDRAM_TYPE_DDR2 \ 120 | SDRAM_CFG_32_BE ) 121 /* 0x43080000 */ 122#define CONFIG_SYS_SDRAM_CFG2 0x00401000 123#define CONFIG_SYS_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ 124 | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) 125 /* 0x44400232 */ 126#define CONFIG_SYS_DDR_MODE_2 0x8000C000 127 128#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 129 /*0x02000000*/ 130#define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \ 131 | DDRCDR_PZ_NOMZ \ 132 | DDRCDR_NZ_NOMZ \ 133 | DDRCDR_M_ODR ) 134 /* 0x73000002 */ 135 136/* 137 * FLASH on the Local Bus 138 */ 139#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 140#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 141#define CONFIG_SYS_FLASH_BASE 0xFE000000 142#define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */ 143#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ 144#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ 145 146#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE | \ 147 (2 << BR_PS_SHIFT) | /* 16 bit */ \ 148 BR_V) /* valid */ 149#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 150 | OR_GPCM_CSNT \ 151 | OR_GPCM_ACS_DIV4 \ 152 | OR_GPCM_SCY_5 \ 153 | OR_GPCM_TRLX \ 154 | OR_GPCM_EAD) 155 /* 0xfe000c55 */ 156 157#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 158#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ 159 160#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 161#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */ 162 163#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 164#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 165 166#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 167 168#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 169#define CONFIG_SYS_RAMBOOT 170#endif 171 172#define CONFIG_SYS_INIT_RAM_LOCK 1 173#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ 174#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 175 176#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 177 GENERATED_GBL_DATA_SIZE) 178#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 179 180/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 181#define CONFIG_SYS_MONITOR_LEN (384 * 1024) 182#define CONFIG_SYS_MALLOC_LEN (512 * 1024) 183 184/* 185 * Local Bus LCRR and LBCR regs 186 */ 187#define CONFIG_SYS_LCRR_EADC LCRR_EADC_3 188#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 189 190#define CONFIG_SYS_LBC_LBCR 0x00040000 191 192#define CONFIG_SYS_LBC_MRTPR 0x20000000 193 194/* 195 * NAND settings 196 */ 197#define CONFIG_SYS_NAND_BASE 0x61000000 198#define CONFIG_SYS_MAX_NAND_DEVICE 1 199#define CONFIG_MTD_NAND_VERIFY_WRITE 200#define CONFIG_CMD_NAND 1 201#define CONFIG_NAND_FSL_ELBC 1 202#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 203 204#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \ 205 | BR_PS_8 \ 206 | BR_DECC_CHK_GEN \ 207 | BR_MS_FCM \ 208 | BR_V ) /* valid */ 209 /* 0x61000c21 */ 210#define CONFIG_SYS_NAND_OR_PRELIM (0xffff8000 \ 211 | OR_FCM_BCTLD \ 212 | OR_FCM_CHT \ 213 | OR_FCM_SCY_2 \ 214 | OR_FCM_RST \ 215 | OR_FCM_TRLX) 216 /* 0xffff90ac */ 217 218#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM 219#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM 220#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM 221#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM 222 223#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE 224#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ 225 226#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM 227#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM 228 229/* CS2 NvRAM */ 230#define CONFIG_SYS_BR2_PRELIM (0x60000000 \ 231 | BR_PS_8 \ 232 | BR_V) 233 /* 0x60000801 */ 234#define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \ 235 | OR_GPCM_CSNT \ 236 | OR_GPCM_XACS \ 237 | OR_GPCM_SCY_3 \ 238 | OR_GPCM_TRLX \ 239 | OR_GPCM_EHTR \ 240 | OR_GPCM_EAD) 241 /* 0xfffe0937 */ 242/* local bus read write buffer mapping SRAM@0x64000000 */ 243#define CONFIG_SYS_BR3_PRELIM (0x62000000 \ 244 | BR_PS_16 \ 245 | BR_V) 246 /* 0x62001001 */ 247 248#define CONFIG_SYS_OR3_PRELIM (0xfe000000 \ 249 | OR_GPCM_CSNT \ 250 | OR_GPCM_XACS \ 251 | OR_GPCM_SCY_15 \ 252 | OR_GPCM_TRLX \ 253 | OR_GPCM_EHTR \ 254 | OR_GPCM_EAD) 255 /* 0xfe0009f7 */ 256 257/* pass open firmware flat tree */ 258#define CONFIG_OF_LIBFDT 1 259#define CONFIG_OF_BOARD_SETUP 1 260#define CONFIG_OF_STDOUT_VIA_ALIAS 1 261 262/* 263 * Serial Port 264 */ 265#define CONFIG_CONS_INDEX 1 266#define CONFIG_SYS_NS16550 267#define CONFIG_SYS_NS16550_SERIAL 268#define CONFIG_SYS_NS16550_REG_SIZE 1 269#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 270 271#define CONFIG_SYS_BAUDRATE_TABLE \ 272 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 273 274#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 275#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 276 277/* Use the HUSH parser */ 278#define CONFIG_SYS_HUSH_PARSER 279#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 280 281#if defined(CONFIG_PCI) 282/* 283 * General PCI 284 * Addresses are mapped 1-1. 285 */ 286#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 287#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 288#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 289#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 290#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 291#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 292#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 293#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 294#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 295 296#define CONFIG_PCI_PNP /* do pci plug-and-play */ 297#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 298#endif 299 300/* 301 * TSEC 302 */ 303#define CONFIG_TSEC_ENET /* TSEC ethernet support */ 304 305#define CONFIG_NET_MULTI 306 307#define CONFIG_TSEC1 308#ifdef CONFIG_TSEC1 309#define CONFIG_HAS_ETH0 310#define CONFIG_TSEC1_NAME "TSEC1" 311#define CONFIG_SYS_TSEC1_OFFSET 0x24000 312#define TSEC1_PHY_ADDR 0x01 313#define TSEC1_FLAGS 0 314#define TSEC1_PHYIDX 0 315#endif 316 317/* Options are: TSEC[0-1] */ 318#define CONFIG_ETHPRIME "TSEC1" 319 320/* 321 * Environment 322 */ 323#define CONFIG_ENV_IS_IN_FLASH 1 324#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ 325 CONFIG_SYS_MONITOR_LEN) 326#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 327#define CONFIG_ENV_SIZE 0x4000 328/* Address and size of Redundant Environment Sector */ 329#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 330 CONFIG_ENV_SECT_SIZE) 331#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 332 333#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 334#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 335 336/* 337 * BOOTP options 338 */ 339#define CONFIG_BOOTP_BOOTFILESIZE 340#define CONFIG_BOOTP_BOOTPATH 341#define CONFIG_BOOTP_GATEWAY 342#define CONFIG_BOOTP_HOSTNAME 343 344/* 345 * Command line configuration. 346 */ 347#include <config_cmd_default.h> 348 349#define CONFIG_CMD_DHCP 350#define CONFIG_CMD_MII 351#define CONFIG_CMD_PING 352#define CONFIG_CMD_PCI 353 354#define CONFIG_CMDLINE_EDITING 1 355#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 356 357/* 358 * Miscellaneous configurable options 359 */ 360#define CONFIG_SYS_LONGHELP /* undef to save memory */ 361#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ 362#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 363#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 364 365#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 366#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 367#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */ 368#define CONFIG_SYS_HZ 1000 /* 1ms ticks */ 369 370/* 371 * For booting Linux, the board info and command line data 372 * have to be in the first 256 MB of memory, since this is 373 * the maximum mapped by the Linux kernel during initialization. 374 */ 375#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ 376 377/* 0x64050000 */ 378#define CONFIG_SYS_HRCW_LOW (\ 379 0x20000000 /* reserved, must be set */ |\ 380 HRCWL_DDRCM |\ 381 HRCWL_CSB_TO_CLKIN_4X1 | \ 382 HRCWL_CORE_TO_CSB_2_5X1) 383 384/* 0xa0600004 */ 385#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \ 386 HRCWH_PCI_ARBITER_ENABLE | \ 387 HRCWH_CORE_ENABLE | \ 388 HRCWH_FROM_0X00000100 | \ 389 HRCWH_BOOTSEQ_DISABLE |\ 390 HRCWH_SW_WATCHDOG_DISABLE |\ 391 HRCWH_ROM_LOC_LOCAL_16BIT | \ 392 HRCWH_TSEC1M_IN_MII | \ 393 HRCWH_BIG_ENDIAN | \ 394 HRCWH_LALE_EARLY) 395 396/* System IO Config */ 397#define CONFIG_SYS_SICRH (0x01000000 | \ 398 SICRH_ETSEC2_B | \ 399 SICRH_ETSEC2_C | \ 400 SICRH_ETSEC2_D | \ 401 SICRH_ETSEC2_E | \ 402 SICRH_ETSEC2_F | \ 403 SICRH_ETSEC2_G | \ 404 SICRH_TSOBI1 | \ 405 SICRH_TSOBI2) 406 /* 0x010fff03 */ 407#define CONFIG_SYS_SICRL (SICRL_LBC | \ 408 SICRL_SPI_A | \ 409 SICRL_SPI_B | \ 410 SICRL_SPI_C | \ 411 SICRL_SPI_D | \ 412 SICRL_ETSEC2_A) 413 /* 0x33fc0003) */ 414 415#define CONFIG_SYS_HID0_INIT 0x000000000 416#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 417 HID0_ENABLE_INSTRUCTION_CACHE) 418 419#define CONFIG_SYS_HID2 HID2_HBE 420 421#define CONFIG_HIGH_BATS 1 /* High BATs supported */ 422 423/* DDR @ 0x00000000 */ 424#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10) 425#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ 426 BATU_VS | BATU_VP) 427 428#if defined(CONFIG_PCI) 429/* PCI @ 0x80000000 */ 430#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10) 431#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ 432 BATU_VS | BATU_VP) 433#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ 434 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 435#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ 436 BATU_VS | BATU_VP) 437#else 438#define CONFIG_SYS_IBAT1L (0) 439#define CONFIG_SYS_IBAT1U (0) 440#define CONFIG_SYS_IBAT2L (0) 441#define CONFIG_SYS_IBAT2U (0) 442#endif 443 444/* PCI2 not supported on 8313 */ 445#define CONFIG_SYS_IBAT3L (0) 446#define CONFIG_SYS_IBAT3U (0) 447#define CONFIG_SYS_IBAT4L (0) 448#define CONFIG_SYS_IBAT4U (0) 449 450/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 451#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ 452 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 453#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | \ 454 BATU_VP) 455 456/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 457#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE) 458#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) 459 460/* FPGA, SRAM, NAND @ 0x60000000 */ 461#define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE) 462#define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP) 463 464#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 465#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 466#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 467#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 468#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 469#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 470#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 471#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 472#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 473#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 474#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 475#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 476#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 477#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 478#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 479#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 480 481#define CONFIG_NETDEV eth0 482 483#define CONFIG_HOSTNAME ve8313 484#define CONFIG_UBOOTPATH ve8313/u-boot.bin 485 486#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 487#define CONFIG_BAUDRATE 115200 488 489#define XMK_STR(x) #x 490#define MK_STR(x) XMK_STR(x) 491 492#define CONFIG_EXTRA_ENV_SETTINGS \ 493 "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ 494 "ethprime=" MK_STR(CONFIG_TSEC1_NAME) "\0" \ 495 "u-boot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 496 "u-boot_addr_r=100000\0" \ 497 "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ 498 "update=protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ 499 "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ 500 "cp.b ${u-boot_addr_r} " MK_STR(CONFIG_SYS_FLASH_BASE) \ 501 " ${filesize};" \ 502 "protect on " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \ 503 504#undef MK_STR 505#undef XMK_STR 506 507#endif /* __CONFIG_H */ 508