LXR uboot/board/freescale/mpc8260ads/mpc8260ads.c

   1/*
   2 * (C) Copyright 2001-2003
   3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 *
   5 * Modified during 2001 by
   6 * Advanced Communications Technologies (Australia) Pty. Ltd.
   7 * Howard Walker, Tuong Vu-Dinh
   8 *
   9 * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
  10 * Added support for the 16M dram simm on the 8260ads boards
  11 *
  12 * (C) Copyright 2003-2004 Arabella Software Ltd.
  13 * Yuli Barcohen <yuli@arabellasw.com>
  14 * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init.
  15 *
  16 * Copyright (c) 2005 MontaVista Software, Inc.
  17 * Vitaly Bordug <vbordug@ru.mvista.com>
  18 * Added support for PCI.
  19 *
  20 * See file CREDITS for list of people who contributed to this
  21 * project.
  22 *
  23 * This program is free software; you can redistribute it and/or
  24 * modify it under the terms of the GNU General Public License as
  25 * published by the Free Software Foundation; either version 2 of
  26 * the License, or (at your option) any later version.
  27 *
  28 * This program is distributed in the hope that it will be useful,
  29 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  31 * GNU General Public License for more details.
  32 *
  33 * You should have received a copy of the GNU General Public License
  34 * along with this program; if not, write to the Free Software
  35 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  36 * MA 02111-1307 USA
  37 */
  38
  39#include <common.h>
  40#include <ioports.h>
  41#include <mpc8260.h>
  42#include <asm/m8260_pci.h>
  43#include <i2c.h>
  44#include <spd.h>
  45#include <miiphy.h>
  46#ifdef CONFIG_PCI
  47#include <pci.h>
  48#endif
  49#ifdef CONFIG_OF_LIBFDT
  50#include <libfdt.h>
  51#include <fdt_support.h>
  52#endif
  53
  54/*
  55 * I/O Port configuration table
  56 *
  57 * if conf is 1, then that port pin will be configured at boot time
  58 * according to the five values podr/pdir/ppar/psor/pdat for that entry
  59 */
  60
  61#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
  62#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
  63#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
  64
  65const iop_conf_t iop_conf_tab[4][32] = {
  66
  67    /* Port A configuration */
  68    {   /*            conf      ppar psor pdir podr pdat */
  69        /* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
  70        /* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
  71        /* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
  72        /* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
  73        /* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
  74        /* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
  75        /* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25 */
  76        /* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24 */
  77        /* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23 */
  78        /* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22 */
  79        /* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
  80        /* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
  81        /* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
  82        /* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
  83        /* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
  84        /* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
  85        /* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
  86        /* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
  87        /* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13 */
  88        /* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12 */
  89        /* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11 */
  90        /* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10 */
  91        /* PA9  */ { 0,          0,   0,   0,   0,   0 }, /* PA9 */
  92        /* PA8  */ { 0,          0,   0,   0,   0,   0 }, /* PA8 */
  93        /* PA7  */ { 0,          0,   0,   1,   0,   0 }, /* PA7 */
  94        /* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6 */
  95        /* PA5  */ { 0,          0,   0,   1,   0,   0 }, /* PA5 */
  96        /* PA4  */ { 0,          0,   0,   1,   0,   0 }, /* PA4 */
  97        /* PA3  */ { 0,          0,   0,   1,   0,   0 }, /* PA3 */
  98        /* PA2  */ { 0,          0,   0,   1,   0,   0 }, /* PA2 */
  99        /* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1 */
 100        /* PA0  */ { 0,          0,   0,   1,   0,   0 }  /* PA0 */
 101    },
 102
 103    /* Port B configuration */
 104    {   /*            conf      ppar psor pdir podr pdat */
 105        /* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER */
 106        /* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV */
 107        /* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN */
 108        /* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER */
 109        /* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL */
 110        /* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS */
 111        /* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
 112        /* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
 113        /* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
 114        /* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
 115        /* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
 116        /* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
 117        /* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
 118        /* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
 119        /* PB17 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV */
 120        /* PB16 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR */
 121        /* PB15 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR */
 122        /* PB14 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN */
 123        /* PB13 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL */
 124        /* PB12 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS */
 125        /* PB11 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
 126        /* PB10 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
 127        /* PB9  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
 128        /* PB8  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
 129        /* PB7  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
 130        /* PB6  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
 131        /* PB5  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
 132        /* PB4  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
 133        /* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 134        /* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 135        /* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 136        /* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* pin doesn't exist */
 137    },
 138
 139    /* Port C */
 140    {   /*            conf      ppar psor pdir podr pdat */
 141        /* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31 */
 142        /* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30 */
 143        /* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29 */
 144        /* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28 */
 145        /* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27 */
 146        /* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26 */
 147        /* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25 */
 148        /* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24 */
 149        /* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23 */
 150        /* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Tx Clock (CLK10) */
 151        /* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Rx Clock (CLK11) */
 152        /* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20 */
 153#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 154        /* PC19 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
 155        /* PC18 */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
 156        /* PC17 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK15) */
 157        /* PC16 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK16) */
 158#else
 159        /* PC19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK13) */
 160        /* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK14) */
 161        /* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17 */
 162        /* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16 */
 163#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 164        /* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15 */
 165        /* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14 */
 166        /* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13 */
 167        /* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12 */
 168        /* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11 */
 169#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 170        /* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10 */
 171        /* PC9  */ { 0,          0,   0,   0,   0,   0 }, /* PC9  */
 172#else
 173        /* PC10 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
 174        /* PC9  */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
 175#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 176        /* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8 */
 177        /* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7 */
 178        /* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6 */
 179        /* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5 */
 180        /* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4 */
 181        /* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3 */
 182        /* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2 */
 183        /* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1 */
 184        /* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0 */
 185    },
 186
 187    /* Port D */
 188    {   /*            conf ppar psor pdir podr pdat */
 189        /* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 UART RxD */
 190        /* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 UART TxD */
 191        /* PD29 */ {   0,   0,   0,   0,   0,   0   }, /* PD29 */
 192        /* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
 193        /* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
 194        /* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
 195        /* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
 196        /* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
 197        /* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
 198        /* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
 199        /* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
 200        /* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
 201        /* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
 202        /* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
 203        /* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
 204        /* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
 205        /* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
 206        /* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
 207        /* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
 208        /* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
 209        /* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
 210        /* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
 211        /* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
 212        /* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
 213        /* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
 214        /* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
 215        /* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
 216        /* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
 217        /* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
 218        /* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
 219        /* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
 220        /* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
 221    }
 222};
 223
 224void reset_phy (void)
 225{
 226        vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 227
 228        /* Reset the PHY */
 229#if CONFIG_SYS_PHY_ADDR == 0
 230        bcsr[1] &= ~(FETHIEN1 | FETH1_RST);
 231        udelay(2);
 232        bcsr[1] |=  FETH1_RST;
 233#else
 234        bcsr[3] &= ~(FETHIEN2 | FETH2_RST);
 235        udelay(2);
 236        bcsr[3] |=  FETH2_RST;
 237#endif /* CONFIG_SYS_PHY_ADDR == 0 */
 238        udelay(1000);
 239#ifdef CONFIG_MII
 240#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
 241        /*
 242         * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
 243         * Enable autonegotiation.
 244         */
 245        bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610);
 246        bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
 247                        BMCR_ANENABLE | BMCR_ANRESTART);
 248#else
 249        /*
 250         * Ethernet PHY is configured (by means of configuration pins)
 251         * to work at 10Mb/s only. We reconfigure it using MII
 252         * to advertise all capabilities, including 100Mb/s, and
 253         * restart autonegotiation.
 254         */
 255
 256        /* Advertise all capabilities */
 257        bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_ADVERTISE, 0x01E1);
 258
 259        /* Do not bypass Rx/Tx (de)scrambler */
 260        bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_FCSCOUNTER,  0x0000);
 261
 262        bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
 263                        BMCR_ANENABLE | BMCR_ANRESTART);
 264#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 265#endif /* CONFIG_MII */
 266}
 267
 268#ifdef CONFIG_PCI
 269typedef struct pci_ic_s {
 270        unsigned long pci_int_stat;
 271        unsigned long pci_int_mask;
 272}pci_ic_t;
 273#endif
 274
 275int board_early_init_f (void)
 276{
 277        vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 278
 279#ifdef CONFIG_PCI
 280        volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
 281
 282        /* mask alll the PCI interrupts */
 283        pci_ic->pci_int_mask |= 0xfff00000;
 284#endif
 285#if (CONFIG_CONS_INDEX == 1) || (CONFIG_KGDB_INDEX == 1)
 286        bcsr[1] &= ~RS232EN_1;
 287#endif
 288#if (CONFIG_CONS_INDEX > 1) || (CONFIG_KGDB_INDEX > 1)
 289        bcsr[1] &= ~RS232EN_2;
 290#endif
 291
 292#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */
 293#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 294        if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */
 295#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 296        {
 297                volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 298
 299                immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
 300                immap->im_siu_conf.sc_siumcr =
 301                        (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
 302                        | SIUMCR_LBPC01;
 303        }
 304#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */
 305
 306        return 0;
 307}
 308
 309#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
 310
 311phys_size_t initdram (int board_type)
 312{
 313#if   CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 314        long int msize = 32;
 315#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 316        long int msize = 64;
 317#else
 318        long int msize = 16;
 319#endif
 320
 321#ifndef CONFIG_SYS_RAMBOOT
 322        volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 323        volatile memctl8260_t *memctl = &immap->im_memctl;
 324        volatile uchar *ramaddr, c = 0xff;
 325        uint or;
 326        uint psdmr;
 327        uint psrt;
 328
 329        int i;
 330
 331        immap->im_siu_conf.sc_ppc_acr  = 0x00000002;
 332        immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
 333        immap->im_siu_conf.sc_tescr1   = 0x00004000;
 334
 335        memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 336#ifdef CONFIG_SYS_LSDRAM_BASE
 337        /*
 338          Initialise local bus SDRAM only if the pins
 339          are configured as local bus pins and not as PCI.
 340          The configuration is determined by the HRCW.
 341        */
 342        if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
 343                memctl->memc_lsrt  = CONFIG_SYS_LSRT;
 344#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */
 345                memctl->memc_or3   = 0xFF803280;
 346                memctl->memc_br3   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
 347#else                             /* CS4 */
 348                memctl->memc_or4   = 0xFFC01480;
 349                memctl->memc_br4   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
 350#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 351                memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
 352                ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE;
 353                *ramaddr = c;
 354                memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
 355                for (i = 0; i < 8; i++)
 356                        *ramaddr = c;
 357                memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
 358                *ramaddr = c;
 359                memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
 360        }
 361#endif /* CONFIG_SYS_LSDRAM_BASE */
 362
 363        /* Init 60x bus SDRAM */
 364#ifdef CONFIG_SPD_EEPROM
 365        {
 366                spd_eeprom_t spd;
 367                uint pbi, bsel, rowst, lsb, tmp;
 368
 369                i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd));
 370
 371                /* Bank-based interleaving is not supported for physical bank
 372                   sizes greater than 128MB which is encoded as 0x20 in SPD
 373                 */
 374                pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI;
 375                msize = spd.nrows * (4 * spd.row_dens); /* Mixed size not supported */
 376                or = ~(msize - 1) << 20;        /* SDAM */
 377                switch (spd.nbanks) {   /* BPD */
 378                case 2:
 379                        bsel = 1;
 380                        break;
 381                case 4:
 382                        bsel = 2;
 383                        or |= 0x00002000;
 384                        break;
 385                case 8:
 386                        bsel = 3;
 387                        or |= 0x00004000;
 388                        break;
 389                }
 390                lsb = 3;        /* For 64-bit port, lsb is 3 bits */
 391
 392                if (pbi) {      /* Bus partition depends on interleaving */
 393                        rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb);
 394                        or |= (rowst << 9);     /* ROWST */
 395                } else {
 396                        rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb);
 397                        or |= ((rowst * 2 - 12) << 9);  /* ROWST */
 398                }
 399                or |= ((spd.nrow_addr - 9) << 6);       /* NUMR */
 400
 401                psdmr = (pbi << 31);    /* PBI */
 402                /* Bus multiplexing parameters */
 403                tmp = 32 - (lsb + spd.nrow_addr);       /* Tables 10-19 and 10-20 */
 404                psdmr |= ((tmp - (rowst - 5) - 13) << 24);      /* SDAM */
 405                psdmr |= ((tmp - 3 - 12) << 21);        /* BSMA */
 406
 407                tmp = (31 - lsb - 10) - tmp;
 408                /* Pin connected to SDA10 is (31 - lsb - 10).
 409                   rowst is multiplexed over (32 - (lsb + spd.nrow_addr)),
 410                   so (rowst + tmp) alternates with AP.
 411                 */
 412                if (pbi)                                /* Table 10-7 */
 413                        psdmr |= ((10 - (rowst + tmp)) << 18);  /* SDA10 */
 414                else
 415                        psdmr |= ((12 - (rowst + tmp)) << 18);  /* SDA10 */
 416
 417                /* SDRAM device-specific parameters */
 418                tmp = ns2clk (70);      /* Refresh recovery is not in SPD, so assume 70ns */
 419                switch (tmp) {          /* RFRC */
 420                case 1:
 421                case 2:
 422                        psdmr |= (1 << 15);
 423                        break;
 424                case 3:
 425                case 4:
 426                case 5:
 427                case 6:
 428                case 7:
 429                case 8:
 430                        psdmr |= ((tmp - 2) << 15);
 431                        break;
 432                default:
 433                        psdmr |= (7 << 15);
 434                }
 435                psdmr |= (ns2clk (spd.trp) % 8 << 12);  /* PRETOACT */
 436                psdmr |= (ns2clk (spd.trcd) % 8 << 9);  /* ACTTORW */
 437                /* BL=0 because for 64-bit SDRAM burst length must be 4 */
 438                /* LDOTOPRE ??? */
 439                for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++)
 440                        tmp >>= 1;
 441                switch (i) {                    /* WRC */
 442                case 0:
 443                case 1:
 444                        psdmr |= (1 << 4);
 445                        break;
 446                case 2:
 447                case 3:
 448                        psdmr |= (i << 4);
 449                        break;
 450                }
 451                /* EAMUX=0 - no external address multiplexing */
 452                /* BUFCMD=0 - no external buffers */
 453                for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++)
 454                        tmp >>= 1;
 455                psdmr |= i;                             /* CL */
 456
 457                switch (spd.refresh & 0x7F) {
 458                case 1:
 459                        tmp = 3900;
 460                        break;
 461                case 2:
 462                        tmp = 7800;
 463                        break;
 464                case 3:
 465                        tmp = 31300;
 466                        break;
 467                case 4:
 468                        tmp = 62500;
 469                        break;
 470                case 5:
 471                        tmp = 125000;
 472                        break;
 473                default:
 474                        tmp = 15625;
 475                }
 476                psrt = tmp / (1000000000 / CONFIG_8260_CLKIN *
 477                                  ((memctl->memc_mptpr >> 8) + 1)) - 1;
 478#ifdef SPD_DEBUG
 479                printf ("\nDIMM type:       %-18.18s\n", spd.mpart);
 480                printf ("SPD size:        %d\n", spd.info_size);
 481                printf ("EEPROM size:     %d\n", 1 << spd.chip_size);
 482                printf ("Memory type:     %d\n", spd.mem_type);
 483                printf ("Row addr:        %d\n", spd.nrow_addr);
 484                printf ("Column addr:     %d\n", spd.ncol_addr);
 485                printf ("# of rows:       %d\n", spd.nrows);
 486                printf ("Row density:     %d\n", spd.row_dens);
 487                printf ("# of banks:      %d\n", spd.nbanks);
 488                printf ("Data width:      %d\n",
 489                                256 * spd.dataw_msb + spd.dataw_lsb);
 490                printf ("Chip width:      %d\n", spd.primw);
 491                printf ("Refresh rate:    %02X\n", spd.refresh);
 492                printf ("CAS latencies:   %02X\n", spd.cas_lat);
 493                printf ("Write latencies: %02X\n", spd.write_lat);
 494                printf ("tRP:             %d\n", spd.trp);
 495                printf ("tRCD:            %d\n", spd.trcd);
 496
 497                printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
 498#endif /* SPD_DEBUG */
 499        }
 500#else  /* !CONFIG_SPD_EEPROM */
 501        or    = CONFIG_SYS_OR2;
 502        psdmr = CONFIG_SYS_PSDMR;
 503        psrt  = CONFIG_SYS_PSRT;
 504#endif /* CONFIG_SPD_EEPROM */
 505        memctl->memc_psrt = psrt;
 506        memctl->memc_or2 = or;
 507        memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041;
 508        ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
 509        memctl->memc_psdmr = psdmr | 0x28000000;        /* Precharge all banks */
 510        *ramaddr = c;
 511        memctl->memc_psdmr = psdmr | 0x08000000;        /* CBR refresh */
 512        for (i = 0; i < 8; i++)
 513                *ramaddr = c;
 514
 515        memctl->memc_psdmr = psdmr | 0x18000000;        /* Mode Register write */
 516        *ramaddr = c;
 517        memctl->memc_psdmr = psdmr | 0x40000000;        /* Refresh enable */
 518        *ramaddr = c;
 519#endif /* CONFIG_SYS_RAMBOOT */
 520
 521        /* return total 60x bus SDRAM size */
 522        return (msize * 1024 * 1024);
 523}
 524
 525int checkboard (void)
 526{
 527#if   CONFIG_ADSTYPE == CONFIG_SYS_8260ADS
 528        puts ("Board: Motorola MPC8260ADS\n");
 529#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS
 530        puts ("Board: Motorola MPC8266ADS\n");
 531#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 532        puts ("Board: Motorola PQ2FADS-ZU\n");
 533#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 534        puts ("Board: Motorola MPC8272ADS\n");
 535#else
 536        puts ("Board: unknown\n");
 537#endif
 538        return 0;
 539}
 540
 541#ifdef CONFIG_PCI
 542struct pci_controller hose;
 543
 544extern void pci_mpc8250_init(struct pci_controller *);
 545
 546void pci_init_board(void)
 547{
 548        pci_mpc8250_init(&hose);
 549}
 550#endif
 551
 552#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 553void ft_board_setup(void *blob, bd_t *bd)
 554{
 555        ft_cpu_setup(blob, bd);
 556#ifdef CONFIG_PCI
 557        ft_pci_setup(blob, bd);
 558#endif
 559}
 560#endif
 561