/*
 * (C) Copyright 2010
 * Texas Instruments, <www.ti.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#include <config.h>
#ifdef CONFIG_TWL6030_POWER

#include <twl6030.h>

/* Functions to read and write from TWL6030 */
static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
{
        return i2c_write(chip_no, reg, 1, &val, 1);
}

static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
{
        return i2c_read(chip_no, reg, 1, val, 1);
}

static int twl6030_gpadc_read_channel(u8 channel_no)
{
        u8 lsb = 0;
        u8 msb = 0;
        int ret = 0;

        ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &lsb,
                                GPCH0_LSB + channel_no * 2);
        if (ret)
                return ret;

        ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &msb,
                                GPCH0_MSB + channel_no * 2);
        if (ret)
                return ret;

        return (msb << 8) | lsb;
}

static int twl6030_gpadc_sw2_trigger(void)
{
        u8 val;
        int ret = 0;

        ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2_SP2, CTRL_P2);
        if (ret)
                return ret;

        /* Waiting until the SW1 conversion ends*/
        val =  CTRL_P2_BUSY;

        while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
                ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &val, CTRL_P2);
                if (ret)
                        return ret;
                udelay(1000);
        }

        return 0;
}

void twl6030_stop_usb_charging(void)
{
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, 0, CONTROLLER_CTRL1);

        return;
}

void twl6030_start_usb_charging(void)
{
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
                                                        CHARGERUSB_VICHRG);
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE,
                                                        CHARGERUSB_CINLIMIT);
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP,
                                                        CONTROLLER_INT_MASK);
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG,
                                                        CHARGERUSB_INT_MASK);
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
                                                        CHARGERUSB_VOREG);
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_400,
                                                        CHARGERUSB_CTRL2);
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TERM, CHARGERUSB_CTRL1);
        /* Enable USB charging */
        twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
                                                        CONTROLLER_CTRL1);
        return;
}

int twl6030_get_battery_current(void)
{
        int battery_current = 0;
        u8 msb = 0;
        u8 lsb = 0;

        twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &msb, FG_REG_11);
        twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &lsb, FG_REG_10);
        battery_current = ((msb << 8) | lsb);

        /* convert 10 bit signed number to 16 bit signed number */
        if (battery_current >= 0x2000)
                battery_current = (battery_current - 0x4000);

        battery_current = battery_current * 3000 / 4096;
        printf("Battery Current: %d mA\n", battery_current);

        return battery_current;
}

int twl6030_get_battery_voltage(void)
{
        int battery_volt = 0;
        int ret = 0;

        /* Start GPADC SW conversion */
        ret = twl6030_gpadc_sw2_trigger();
        if (ret) {
                printf("Failed to convert battery voltage\n");
                return ret;
        }

        /* measure Vbat voltage */
        battery_volt = twl6030_gpadc_read_channel(7);
        if (battery_volt < 0) {
                printf("Failed to read battery voltage\n");
                return ret;
        }
        battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
        printf("Battery Voltage: %d mV\n", battery_volt);

        return battery_volt;
}

void twl6030_init_battery_charging(void)
{
        u8 stat1 = 0;
        int battery_volt = 0;
        int ret = 0;

        /* Enable VBAT measurement */
        twl6030_i2c_write_u8(TWL6030_CHIP_PM, VBAT_MEAS, MISC1);

        /* Enable GPADC module */
        ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, FGS | GPADCS, TOGGLE1);
        if (ret) {
                printf("Failed to enable GPADC\n");
                return;
        }

        battery_volt = twl6030_get_battery_voltage();
        if (battery_volt < 0)
                return;

        if (battery_volt < 3000)
                printf("Main battery voltage too low!\n");

        /* Check for the presence of USB charger */
        twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &stat1, CONTROLLER_STAT1);

        /* check for battery presence indirectly via Fuel gauge */
        if ((stat1 & VBUS_DET) && (battery_volt < 3300))
                twl6030_start_usb_charging();

        return;
}

void twl6030_power_mmc_init()
{
        /* set voltage to 3.0 and turnon for APP */
        twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE);
        twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE);
}

void twl6030_usb_device_settings()
{
        u8 data = 0;

        /* Select APP Group and set state to ON */
        twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE);

        twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2);
        data |= 0x10;

        /* Select the input supply for VBUS regulator */
        twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2);
}
#endif