1/* 2 * (C) Copyright 2000, 2001 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * (C) Copyright 2001 5 * Torsten Stevens, FHG IMS, stevens@ims.fhg.de 6 * Bruno Achauer, Exet AG, bruno@exet-ag.de. 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27/* 28 * board/config.h - configuration options, board specific 29 * [derived from config_TQM850L.h] 30 */ 31 32#ifndef __CONFIG_H 33#define __CONFIG_H 34 35/* 36 * High Level Configuration Options 37 * (easy to change) 38 */ 39 40#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ 41#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */ 42 43#define CONFIG_SYS_TEXT_BASE 0x40000000 44 45/* 46 * Port assignments (CONFIG_LANTEC == 1): 47 * - SMC1: J11 (MDB) ? 48 * - SMC2: J6 (Feature connector) 49 * - SCC2: J9 (RJ45) 50 * - SCC3: J8 (Sub-D9) 51 * 52 * Port assignments (CONFIG_LANTEC == 2): TBD 53 */ 54 55 56#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */ 57#define CONFIG_8xx_CONS_SCC3 58#undef CONFIG_8xx_CONS_NONE 59#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ 60#if 0 61#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ 62#else 63#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ 64#endif 65 66#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ 67 68#undef CONFIG_BOOTARGS 69#define CONFIG_BOOTCOMMAND \ 70 "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000" 71 72#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 73#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ 74 75#undef CONFIG_WATCHDOG /* watchdog disabled */ 76 77#define CONFIG_STATUS_LED 1 /* Status LED enabled */ 78 79/* 80 * BOOTP options 81 */ 82#define CONFIG_BOOTP_SUBNETMASK 83#define CONFIG_BOOTP_GATEWAY 84#define CONFIG_BOOTP_HOSTNAME 85#define CONFIG_BOOTP_BOOTPATH 86#define CONFIG_BOOTP_BOOTFILESIZE 87 88 89/* 90 * Command line configuration. 91 */ 92#include <config_cmd_default.h> 93 94#define CONFIG_CMD_ASKENV 95#define CONFIG_CMD_CACHE 96#define CONFIG_CMD_CDP 97#define CONFIG_CMD_DATE 98#define CONFIG_CMD_DHCP 99#define CONFIG_CMD_DIAG 100#define CONFIG_CMD_FAT 101#define CONFIG_CMD_IMMAP 102#define CONFIG_CMD_PING 103#define CONFIG_CMD_PORTIO 104#define CONFIG_CMD_REGINFO 105#define CONFIG_CMD_SAVES 106#define CONFIG_CMD_SDRAM 107#define CONFIG_CMD_SNTP 108 109#undef CONFIG_CMD_XIMG 110 111#if !(CONFIG_LANTEC >= 2) 112 #undef CONFIG_CMD_DATE 113 #undef CONFIG_CMD_NET 114#endif 115 116 117#if CONFIG_LANTEC >= 2 118#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ 119#endif 120 121/* 122 * Miscellaneous configurable options 123 */ 124#define CONFIG_SYS_LONGHELP /* undef to save memory */ 125#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 126#if defined(CONFIG_CMD_KGDB) 127#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 128#else 129#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 130#endif 131#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 132#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 133#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 134 135#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ 136#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ 137 138#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ 139 140#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ 141 142#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 143 144/* 145 * Low Level Configuration Settings 146 * (address mappings, register initial values, etc.) 147 * You should know what you are doing if you make changes here. 148 */ 149/*----------------------------------------------------------------------- 150 * Internal Memory Mapped Register 151 */ 152#define CONFIG_SYS_IMMR 0xFFF00000 153 154/*----------------------------------------------------------------------- 155 * Definitions for initial stack pointer and data area (in DPRAM) 156 */ 157#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR 158#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ 159#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 160#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 161 162/*----------------------------------------------------------------------- 163 * Start addresses for the final memory configuration 164 * (Set up by the startup code) 165 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 166 */ 167#define CONFIG_SYS_SDRAM_BASE 0x00000000 168#define CONFIG_SYS_FLASH_BASE 0x40000000 169#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 170#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 171#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 172 173/* 174 * For booting Linux, the board info and command line data 175 * have to be in the first 8 MB of memory, since this is 176 * the maximum mapped by the Linux kernel during initialization. 177 */ 178#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 179 180/*----------------------------------------------------------------------- 181 * FLASH organization 182 */ 183#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 184#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ 185 186#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 187#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 188 189#define CONFIG_ENV_IS_IN_FLASH 1 190#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ 191#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ 192 193/*----------------------------------------------------------------------- 194 * Cache Configuration 195 */ 196#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ 197#if defined(CONFIG_CMD_KGDB) 198#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ 199#endif 200 201/*----------------------------------------------------------------------- 202 * SYPCR - System Protection Control 11-9 203 * SYPCR can only be written once after reset! 204 *----------------------------------------------------------------------- 205 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze 206 */ 207#if defined(CONFIG_WATCHDOG) 208#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ 209 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) 210#else 211#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) 212#endif 213 214/*----------------------------------------------------------------------- 215 * SIUMCR - SIU Module Configuration 11-6 216 *----------------------------------------------------------------------- 217 * PCMCIA config., multi-function pin tri-state 218 */ 219#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK) 220 221/*----------------------------------------------------------------------- 222 * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX] 223 *----------------------------------------------------------------------- 224 */ 225#define CONFIG_8xx_GCLK_FREQ 33000000 226 227/*----------------------------------------------------------------------- 228 * TBSCR - Time Base Status and Control 11-26 229 *----------------------------------------------------------------------- 230 * Clear Reference Interrupt Status, Timebase freezing enabled 231 */ 232#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) 233 234/*----------------------------------------------------------------------- 235 * RTCSC - Real-Time Clock Status and Control Register 11-27 236 *----------------------------------------------------------------------- 237 */ 238#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) 239 240/*----------------------------------------------------------------------- 241 * PISCR - Periodic Interrupt Status and Control 11-31 242 *----------------------------------------------------------------------- 243 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled 244 */ 245#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) 246 247/*----------------------------------------------------------------------- 248 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 249 *----------------------------------------------------------------------- 250 * Reset PLL lock status sticky bit, timer expired status bit and timer 251 * interrupt status bit 252 * 253 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! 254 */ 255 /* up to 50 MHz we use a 1:1 clock */ 256#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) 257 258/*----------------------------------------------------------------------- 259 * SCCR - System Clock and reset Control Register 15-27 260 *----------------------------------------------------------------------- 261 * Set clock output, timebase and RTC source and divider, 262 * power management and some other internal clocks 263 */ 264#define SCCR_MASK SCCR_EBDF11 265 /* up to 50 MHz we use a 1:1 clock */ 266#define CONFIG_SYS_SCCR (SCCR_TBS | \ 267 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ 268 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ 269 SCCR_DFALCD00) 270 271/*----------------------------------------------------------------------- 272 * 273 *----------------------------------------------------------------------- 274 * 275 */ 276#define CONFIG_SYS_DER 0 277 278/* 279 * Init Memory Controller: 280 * 281 * BR0/5 and OR0/5 (FLASH) 282 */ 283 284#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ 285#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */ 286 287/* used to re-map FLASH both when starting from SRAM or FLASH: 288 * restrict access enough to keep SRAM working (if any) 289 * but not too much to meddle with FLASH accesses 290 */ 291#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ 292#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ 293 294/* FLASH timing */ 295#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \ 296 OR_SCY_5_CLK | OR_TRLX) 297 298#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) 299#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) 300#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) 301 302#define CONFIG_SYS_OR5_REMAP CONFIG_SYS_OR0_REMAP 303#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_OR0_PRELIM 304#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V ) 305 306/* 307 * BR2/3 and OR2/3 (SDRAM) 308 * 309 */ 310#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ 311#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ 312 313/* SDRAM timing: Multiplexed addresses */ 314#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM) 315 316#define CONFIG_SYS_OR3_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) 317#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) 318 319/* 320 * Memory Periodic Timer Prescaler 321 */ 322 323/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ 324#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ 325#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ 326 327/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ 328#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ 329#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ 330 331/* 332 * MAMR settings for SDRAM 333 */ 334/* periodic timer for refresh */ 335#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ 336 337/* 8 column SDRAM */ 338#define CONFIG_SYS_MAMR_8COL \ 339 ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ 340 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ 341 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) 342 343/* 344 * JFFS2 partitions 345 * 346 */ 347/* No command line, one static partition, whole device */ 348#undef CONFIG_CMD_MTDPARTS 349#define CONFIG_JFFS2_DEV "nor0" 350#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF 351#define CONFIG_JFFS2_PART_OFFSET 0x00000000 352 353/* mtdparts command line support */ 354/* 355#define CONFIG_CMD_MTDPARTS 356#define MTDIDS_DEFAULT "" 357#define MTDPARTS_DEFAULT "" 358*/ 359 360#endif /* __CONFIG_H */ 361