1/* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Compact Integrator board. 11 * 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 */ 30 31#ifndef __CONFIG_H 32#define __CONFIG_H 33 34#define CONFIG_INTEGRATOR 35#define CONFIG_ARCH_INTEGRATOR 36/* 37 * High Level Configuration Options 38 * (easy to change) 39 */ 40#define CONFIG_SYS_TEXT_BASE 0x01000000 41#define CONFIG_SYS_MEMTEST_START 0x100000 42#define CONFIG_SYS_MEMTEST_END 0x10000000 43#define CONFIG_SYS_HZ 1000 44#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ 45#define CONFIG_SYS_TIMERBASE 0x13000100 46 47#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 48#define CONFIG_SETUP_MEMORY_TAGS 1 49#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ 50/* 51 * Size of malloc() pool 52 */ 53#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) 54 55/* 56 * Hardware drivers 57 */ 58#define CONFIG_SMC91111 59#define CONFIG_SMC_USE_32_BIT 60#define CONFIG_SMC91111_BASE 0xC8000000 61#undef CONFIG_SMC91111_EXT_PHY 62 63/* 64 * NS16550 Configuration 65 */ 66#define CONFIG_PL011_SERIAL 67#define CONFIG_PL011_CLOCK 14745600 68#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 } 69#define CONFIG_CONS_INDEX 0 70#define CONFIG_BAUDRATE 38400 71#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 72#define CONFIG_SYS_SERIAL0 0x16000000 73#define CONFIG_SYS_SERIAL1 0x17000000 74 75 76/* 77 * BOOTP options 78 */ 79#define CONFIG_BOOTP_BOOTFILESIZE 80#define CONFIG_BOOTP_BOOTPATH 81#define CONFIG_BOOTP_GATEWAY 82#define CONFIG_BOOTP_HOSTNAME 83 84 85/* 86 * Command line configuration. 87 */ 88#define CONFIG_CMD_BDI 89#define CONFIG_CMD_DHCP 90#define CONFIG_CMD_SAVEENV 91#define CONFIG_CMD_FLASH 92#define CONFIG_CMD_IMI 93#define CONFIG_CMD_MEMORY 94#define CONFIG_CMD_NET 95#define CONFIG_CMD_PING 96 97 98#if 0 99#define CONFIG_BOOTDELAY 2 100#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" 101#define CONFIG_BOOTCOMMAND "bootp ; bootm" 102#endif 103/* The kernel command line & boot command below are for a platform flashed with afu.axf 104 105Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot 106Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux 107Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs 108SIB at Block62 End Block62 address 0x24f80000 109 110*/ 111#define CONFIG_BOOTDELAY 2 112#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0" 113#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm" 114 115/* 116 * Miscellaneous configurable options 117 */ 118#define CONFIG_SYS_LONGHELP /* undef to save memory */ 119#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */ 120#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ 121/* Print Buffer Size */ 122#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 123#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 124#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/ 125 126#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ 127 128/*----------------------------------------------------------------------- 129 * Stack sizes 130 * 131 * The stack sizes are set up in start.S using the settings below 132 */ 133#define CONFIG_STACKSIZE (128*1024) /* regular stack */ 134#ifdef CONFIG_USE_IRQ 135#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ 136#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ 137#endif 138 139/*----------------------------------------------------------------------- 140 * Physical Memory Map 141 */ 142#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 143#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ 144#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ 145#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 146#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE 147#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ 148 CONFIG_SYS_INIT_RAM_SIZE - \ 149 GENERATED_GBL_DATA_SIZE) 150#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET 151 152/*----------------------------------------------------------------------- 153 * FLASH and environment organization 154 155 * Top varies according to amount fitted 156 * Reserve top 4 blocks of flash 157 * - ARM Boot Monitor 158 * - Unused 159 * - SIB block 160 * - U-Boot environment 161 * 162 * Base is always 0x24000000 163 164 */ 165#define CONFIG_SYS_FLASH_BASE 0x24000000 166#define CONFIG_SYS_FLASH_CFI 1 167#define CONFIG_FLASH_CFI_DRIVER 1 168#define CONFIG_SYS_MAX_FLASH_SECT 64 169#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 170#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 171#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ 172#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ 173 174#define CONFIG_SYS_MONITOR_LEN 0x00100000 175#define CONFIG_ENV_IS_IN_FLASH 1 176 177/* 178 * Move up the U-Boot & monitor area if more flash is fitted. 179 * If this U-Boot is to be run on Integrators with varying flash sizes, 180 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG 181 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE 182 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not 183 * embedded in the boot monitor(s) area 184 */ 185#if ( PHYS_FLASH_SIZE == 0x04000000 ) 186 187#define CONFIG_ENV_ADDR 0x27F00000 188#define CONFIG_SYS_MONITOR_BASE 0x27F40000 189 190#elif (PHYS_FLASH_SIZE == 0x02000000 ) 191 192#define CONFIG_ENV_ADDR 0x25F00000 193#define CONFIG_SYS_MONITOR_BASE 0x25F40000 194 195#else 196 197#define CONFIG_ENV_ADDR 0x24F00000 198#define CONFIG_SYS_MONITOR_BASE 0x27F40000 199 200#endif 201 202#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ 203#define CONFIG_ENV_SIZE 8192 /* 8KB */ 204/*----------------------------------------------------------------------- 205 * CP control registers 206 */ 207#define CPCR_BASE 0xCB000000 /* CP Registers*/ 208#define OS_FLASHPROG 0x00000004 /* Flash register*/ 209#define CPMASK_EXTRABANK 0x8 210#define CPMASK_FLASHSIZE 0x4 211#define CPMASK_FLWREN 0x2 212#define CPMASK_FLVPPEN 0x1 213 214/* 215 * The ARM boot monitor initializes the board. 216 * However, the default U-Boot code also performs the initialization. 217 * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT 218 * - see documentation supplied with board for details of how to choose the 219 * image to run at reset/power up 220 * e.g. whether the ARM Boot Monitor runs before U-Boot 221 222#define CONFIG_SKIP_LOWLEVEL_INIT 223 224 */ 225 226/* 227 * The ARM boot monitor does not relocate U-Boot. 228 * However, the default U-Boot code performs the relocation check, 229 * and may relocate the code if the memory map is changed. 230 * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT 231 232#define SKIP_CONFIG_RELOCATE_UBOOT 233 234 */ 235/*----------------------------------------------------------------------- 236 * There are various dependencies on the core module (CM) fitted 237 * Users should refer to their CM user guide 238 * - when porting adjust u-boot/Makefile accordingly 239 * to define the necessary CONFIG_ s for the CM involved 240 * see e.g. cp_926ejs_config 241 */ 242 243#include "armcoremodule.h" 244 245/* 246 * If CONFIG_SKIP_LOWLEVEL_INIT is not defined & 247 * the core module has a CM_INIT register 248 * then the U-Boot initialisation code will 249 * e.g. ARM Boot Monitor or pre-loader is repeated once 250 * (to re-initialise any existing CM_INIT settings to safe values). 251 * 252 * This is usually not the desired behaviour since the platform 253 * will either reboot into the ARM monitor (or pre-loader) 254 * or continuously cycle thru it without U-Boot running, 255 * depending upon the setting of Integrator/CP switch S2-4. 256 * 257 * However it may be needed if Integrator/CP switch S2-1 258 * is set OFF to boot direct into U-Boot. 259 * In that case comment out the line below. 260#undef CONFIG_CM_INIT 261 */ 262 263#endif /* __CONFIG_H */ 264