LXR uboot/include/configs/edminiv2.h

   1/*
   2 * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
   3 *
   4 * Based on original Kirkwood support which is
   5 * (C) Copyright 2009
   6 * Marvell Semiconductor <www.marvell.com>
   7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   8 *
   9 * See file CREDITS for list of people who contributed to this
  10 * project.
  11 *
  12 * This program is free software; you can redistribute it and/or
  13 * modify it under the terms of the GNU General Public License as
  14 * published by the Free Software Foundation; either version 2 of
  15 * the License, or (at your option) any later version.
  16 *
  17 * This program is distributed in the hope that it will be useful,
  18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20 * GNU General Public License for more details.
  21 *
  22 * You should have received a copy of the GNU General Public License
  23 * along with this program; if not, write to the Free Software
  24 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  25 * MA 02110-1301 USA
  26 */
  27
  28#ifndef _CONFIG_EDMINIV2_H
  29#define _CONFIG_EDMINIV2_H
  30
  31/*
  32 * Version number information
  33 */
  34
  35#define CONFIG_IDENT_STRING     " EDMiniV2"
  36
  37/*
  38 * High Level Configuration Options (easy to change)
  39 */
  40
  41#define CONFIG_MARVELL          1
  42#define CONFIG_ARM926EJS        1       /* Basic Architecture */
  43#define CONFIG_FEROCEON         1       /* CPU Core subversion */
  44#define CONFIG_ORION5X          1       /* SOC Family Name */
  45#define CONFIG_88F5182          1       /* SOC Name */
  46#define CONFIG_MACH_EDMINIV2    1       /* Machine type */
  47
  48#include <asm/arch/orion5x.h>
  49/*
  50 * CLKs configurations
  51 */
  52
  53#define CONFIG_SYS_HZ           1000
  54
  55/*
  56 * Board-specific values for Orion5x MPP low level init:
  57 * - MPPs 12 to 15 are SATA LEDs (mode 5)
  58 * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
  59 *   MPP16 to MPP19, mode 0 for others
  60 */
  61
  62#define ORION5X_MPP0_7          0x00000003
  63#define ORION5X_MPP8_15         0x55550000
  64#define ORION5X_MPP16_23        0x00005555
  65
  66/*
  67 * Board-specific values for Orion5x GPIO low level init:
  68 * - GPIO3 is input (RTC interrupt)
  69 * - GPIO16 is Power LED control (0 = on, 1 = off)
  70 * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  71 * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
  72 * - Last GPIO is 26, further bits are supposed to be 0.
  73 * Enable mask has ones for INPUT, 0 for OUTPUT.
  74 * Default is LED ON.
  75 */
  76
  77#define ORION5X_GPIO_OUT_ENABLE 0x03fcffff
  78#define ORION5X_GPIO_OUT_VALUE  0x03fcffff
  79
  80/*
  81 * NS16550 Configuration
  82 */
  83
  84#define CONFIG_SYS_NS16550
  85#define CONFIG_SYS_NS16550_SERIAL
  86#define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  87#define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  88#define CONFIG_SYS_NS16550_COM1         ORION5X_UART0_BASE
  89
  90/*
  91 * Serial Port configuration
  92 * The following definitions let you select what serial you want to use
  93 * for your console driver.
  94 */
  95
  96#define CONFIG_CONS_INDEX       1       /*Console on UART0 */
  97#define CONFIG_BAUDRATE                 115200
  98#define CONFIG_SYS_BAUDRATE_TABLE \
  99        { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
 100
 101/*
 102 * FLASH configuration
 103 */
 104
 105#define CONFIG_SYS_FLASH_CFI
 106#define CONFIG_FLASH_CFI_DRIVER
 107#define CONFIG_FLASH_CFI_LEGACY
 108#define CONFIG_SYS_MAX_FLASH_BANKS      1  /* max num of flash banks       */
 109#define CONFIG_SYS_MAX_FLASH_SECT       11 /* max num of sects on one chip */
 110#define CONFIG_SYS_FLASH_BASE           0xfff80000
 111#define CONFIG_SYS_FLASH_SECTSZ \
 112        {16384, 8192, 8192, 32768, \
 113         65536, 65536, 65536, 65536, 65536, 65536, 65536}
 114
 115/* auto boot */
 116#define CONFIG_BOOTDELAY        3       /* default enable autoboot */
 117
 118/*
 119 * For booting Linux, the board info and command line data
 120 * have to be in the first 8 MB of memory, since this is
 121 * the maximum mapped by the Linux kernel during initialization.
 122 */
 123#define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs  */
 124#define CONFIG_INITRD_TAG       1       /* enable INITRD tag */
 125#define CONFIG_SETUP_MEMORY_TAGS 1      /* enable memory tag */
 126
 127#define CONFIG_SYS_PROMPT       "EDMiniV2> "    /* Command Prompt */
 128#define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 129#define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 130                +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
 131/*
 132 * Commands configuration - using default command set for now
 133 */
 134#include <config_cmd_default.h>
 135#define CONFIG_CMD_IDE
 136#define CONFIG_CMD_I2C
 137#define CONFIG_CMD_USB
 138
 139/*
 140 * Network
 141 */
 142
 143#ifdef CONFIG_CMD_NET
 144#define CONFIG_MVGBE                            /* Enable Marvell GbE Driver */
 145#define CONFIG_MVGBE_PORTS      {1}             /* enable port 0 only */
 146#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION     /* don't randomize MAC */
 147#define CONFIG_PHY_BASE_ADR     0x8
 148#define CONFIG_RESET_PHY_R      /* use reset_phy() to init mv8831116 PHY */
 149#define CONFIG_NETCONSOLE       /* include NetConsole support   */
 150#define CONFIG_MII              /* expose smi ove miiphy interface */
 151#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 152#define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 153#endif
 154
 155/*
 156 * IDE
 157 */
 158#ifdef CONFIG_CMD_IDE
 159#define __io
 160#define CONFIG_IDE_PREINIT
 161#define CONFIG_DOS_PARTITION
 162#define CONFIG_CMD_EXT2
 163/* ED Mini V has an IDE-compatible SATA connector for port 1 */
 164#define CONFIG_MVSATA_IDE
 165#define CONFIG_MVSATA_IDE_USE_PORT1
 166/* Needs byte-swapping for ATA data register */
 167#define CONFIG_IDE_SWAP_IO
 168/* Data, registers and alternate blocks are at the same offset */
 169#define CONFIG_SYS_ATA_DATA_OFFSET      (0x0100)
 170#define CONFIG_SYS_ATA_REG_OFFSET       (0x0100)
 171#define CONFIG_SYS_ATA_ALT_OFFSET       (0x0100)
 172/* Each 8-bit ATA register is aligned to a 4-bytes address */
 173#define CONFIG_SYS_ATA_STRIDE           4
 174/* Controller supports 48-bits LBA addressing */
 175#define CONFIG_LBA48
 176/* A single bus, a single device */
 177#define CONFIG_SYS_IDE_MAXBUS           1
 178#define CONFIG_SYS_IDE_MAXDEVICE        1
 179/* ATA registers base is at SATA controller base */
 180#define CONFIG_SYS_ATA_BASE_ADDR        ORION5X_SATA_BASE
 181/* ATA bus 0 is orion5x port 1 on ED Mini V2 */
 182#define CONFIG_SYS_ATA_IDE0_OFFSET      ORION5X_SATA_PORT1_OFFSET
 183/* end of IDE defines */
 184#endif /* CMD_IDE */
 185
 186/*
 187 * Common USB/EHCI configuration
 188 */
 189#ifdef CONFIG_CMD_USB
 190#define CONFIG_USB_EHCI         /* Enable EHCI USB support */
 191#define CONFIG_USB_EHCI_MARVELL
 192#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
 193#define CONFIG_USB_STORAGE
 194#define CONFIG_DOS_PARTITION
 195#define CONFIG_ISO_PARTITION
 196#define CONFIG_SUPPORT_VFAT
 197#endif /* CONFIG_CMD_USB */
 198
 199/*
 200 * I2C related stuff
 201 */
 202#ifdef CONFIG_CMD_I2C
 203#define CONFIG_I2C_MVTWSI
 204#define CONFIG_I2C_MVTWSI_BASE          ORION5X_TWSI_BASE
 205#define CONFIG_SYS_I2C_SLAVE            0x0
 206#define CONFIG_SYS_I2C_SPEED            100000
 207#endif
 208
 209/*
 210 *  Environment variables configurations
 211 */
 212#define CONFIG_ENV_IS_IN_FLASH          1
 213#define CONFIG_ENV_SECT_SIZE            0x2000  /* 16K */
 214#define CONFIG_ENV_SIZE                 0x2000
 215#define CONFIG_ENV_OFFSET               0x4000  /* env starts here */
 216
 217/*
 218 * Size of malloc() pool
 219 */
 220#define CONFIG_SYS_MALLOC_LEN   (1024 * 128) /* 128kB for malloc() */
 221
 222/*
 223 * Other required minimal configurations
 224 */
 225#define CONFIG_CONSOLE_INFO_QUIET       /* some code reduction */
 226#define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 227#define CONFIG_ARCH_MISC_INIT           /* call arch_misc_init() */
 228#define CONFIG_DISPLAY_CPUINFO          /* Display cpu info */
 229#define CONFIG_NR_DRAM_BANKS            1
 230
 231#define CONFIG_STACKSIZE                0x00100000
 232#define CONFIG_SYS_LOAD_ADDR            0x00800000
 233#define CONFIG_SYS_MEMTEST_START        0x00400000
 234#define CONFIG_SYS_MEMTEST_END          0x007fffff
 235#define CONFIG_SYS_RESET_ADDRESS        0xffff0000
 236#define CONFIG_SYS_MAXARGS              16
 237
 238/* Use the HUSH parser */
 239#define CONFIG_SYS_HUSH_PARSER
 240#define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 241
 242/* Enable command line editing */
 243#define CONFIG_CMDLINE_EDITING
 244
 245/* provide extensive help */
 246#define CONFIG_SYS_LONGHELP
 247
 248/* additions for new relocation code, must be added to all boards */
 249#define CONFIG_SYS_SDRAM_BASE           0
 250#define CONFIG_SYS_INIT_SP_ADDR \
 251        (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
 252
 253#endif /* _CONFIG_EDMINIV2_H */
 254