1/* 2 * Copyright (C) 2011 Freescale Semiconductor, Inc. 3 * Jason Liu <r64343@freescale.com> 4 * 5 * Configuration settings for Freescale MX53 low cost board. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23#ifndef __CONFIG_H 24#define __CONFIG_H 25 26#define CONFIG_MX53 27 28#define CONFIG_SYS_MX5_HCLK 24000000 29#define CONFIG_SYS_MX5_CLK32 32768 30#define CONFIG_DISPLAY_CPUINFO 31#define CONFIG_DISPLAY_BOARDINFO 32 33#define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO 34 35#include <asm/arch/imx-regs.h> 36 37#define CONFIG_CMDLINE_TAG 38#define CONFIG_SETUP_MEMORY_TAGS 39#define CONFIG_INITRD_TAG 40 41/* Size of malloc() pool */ 42#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 43 44#define CONFIG_BOARD_EARLY_INIT_F 45#define CONFIG_MXC_GPIO 46 47#define CONFIG_MXC_UART 48#define CONFIG_MXC_UART_BASE UART1_BASE 49 50/* MMC Configs */ 51#define CONFIG_FSL_ESDHC 52#define CONFIG_SYS_FSL_ESDHC_ADDR 0 53#define CONFIG_SYS_FSL_ESDHC_NUM 2 54 55#define CONFIG_MMC 56#define CONFIG_CMD_MMC 57#define CONFIG_GENERIC_MMC 58#define CONFIG_CMD_FAT 59#define CONFIG_DOS_PARTITION 60 61/* Eth Configs */ 62#define CONFIG_HAS_ETH1 63#define CONFIG_MII 64#define CONFIG_DISCOVER_PHY 65 66#define CONFIG_FEC_MXC 67#define IMX_FEC_BASE FEC_BASE_ADDR 68#define CONFIG_FEC_MXC_PHYADDR 0x1F 69 70#define CONFIG_CMD_PING 71#define CONFIG_CMD_DHCP 72#define CONFIG_CMD_MII 73#define CONFIG_CMD_NET 74 75/* USB Configs */ 76#define CONFIG_CMD_USB 77#define CONFIG_CMD_FAT 78#define CONFIG_USB_EHCI 79#define CONFIG_USB_EHCI_MX5 80#define CONFIG_USB_STORAGE 81#define CONFIG_USB_HOST_ETHER 82#define CONFIG_USB_ETHER_ASIX 83#define CONFIG_USB_ETHER_SMSC95XX 84#define CONFIG_MXC_USB_PORT 1 85#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 86#define CONFIG_MXC_USB_FLAGS 0 87 88/* allow to overwrite serial and ethaddr */ 89#define CONFIG_ENV_OVERWRITE 90#define CONFIG_CONS_INDEX 1 91#define CONFIG_BAUDRATE 115200 92#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} 93 94/* Command definition */ 95#include <config_cmd_default.h> 96 97#undef CONFIG_CMD_IMLS 98 99#define CONFIG_BOOTDELAY 3 100 101#define CONFIG_ETHPRIME "FEC0" 102 103#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ 104#define CONFIG_SYS_TEXT_BASE 0x77800000 105 106#define CONFIG_EXTRA_ENV_SETTINGS \ 107 "script=boot.scr\0" \ 108 "uimage=uImage\0" \ 109 "mmcdev=0\0" \ 110 "mmcpart=2\0" \ 111 "mmcroot=/dev/mmcblk0p3 rw\0" \ 112 "mmcrootfstype=ext3 rootwait\0" \ 113 "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ 114 "root=${mmcroot} " \ 115 "rootfstype=${mmcrootfstype}\0" \ 116 "loadbootscript=" \ 117 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 118 "bootscript=echo Running bootscript from mmc ...; " \ 119 "source\0" \ 120 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 121 "mmcboot=echo Booting from mmc ...; " \ 122 "run mmcargs; " \ 123 "bootm\0" \ 124 "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ 125 "root=/dev/nfs " \ 126 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 127 "netboot=echo Booting from net ...; " \ 128 "run netargs; " \ 129 "dhcp ${uimage}; bootm\0" \ 130 131#define CONFIG_BOOTCOMMAND \ 132 "if mmc rescan ${mmcdev}; then " \ 133 "if run loadbootscript; then " \ 134 "run bootscript; " \ 135 "else " \ 136 "if run loaduimage; then " \ 137 "run mmcboot; " \ 138 "else run netboot; " \ 139 "fi; " \ 140 "fi; " \ 141 "else run netboot; fi" 142 143#define CONFIG_ARP_TIMEOUT 200UL 144 145/* Miscellaneous configurable options */ 146#define CONFIG_SYS_LONGHELP /* undef to save memory */ 147#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 148#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 149#define CONFIG_SYS_PROMPT "MX53LOCO U-Boot > " 150#define CONFIG_AUTO_COMPLETE 151#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 152 153/* Print Buffer Size */ 154#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 155#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 156#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 157 158#define CONFIG_SYS_MEMTEST_START 0x70000000 159#define CONFIG_SYS_MEMTEST_END 0x70010000 160 161#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 162 163#define CONFIG_SYS_HZ 1000 164#define CONFIG_CMDLINE_EDITING 165 166/* Stack sizes */ 167#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 168 169/* Physical Memory Map */ 170#define CONFIG_NR_DRAM_BANKS 2 171#define PHYS_SDRAM_1 CSD0_BASE_ADDR 172#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) 173#define PHYS_SDRAM_2 CSD1_BASE_ADDR 174#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) 175#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) 176 177#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) 178#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) 179#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) 180 181#define CONFIG_SYS_INIT_SP_OFFSET \ 182 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 183#define CONFIG_SYS_INIT_SP_ADDR \ 184 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 185 186/* FLASH and environment organization */ 187#define CONFIG_SYS_NO_FLASH 188 189#define CONFIG_ENV_OFFSET (6 * 64 * 1024) 190#define CONFIG_ENV_SIZE (8 * 1024) 191#define CONFIG_ENV_IS_IN_MMC 192#define CONFIG_SYS_MMC_ENV_DEV 0 193 194#define CONFIG_OF_LIBFDT 195 196#endif /* __CONFIG_H */ 197