/*
 * Copyright 2009-2010 Freescale Semiconductor.
 *
 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <hwconfig.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <asm/io.h>
#include <spd_sdram.h>
#include <i2c.h>
#include <ioports.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
#include <phy.h>

#include "bcsr.h"
#if defined(CONFIG_PQ_MDS_PIB)
#include "../common/pq-mds-pib.h"
#endif

const qe_iop_conf_t qe_iop_conf_tab[] = {
        /* QE_MUX_MDC */
        {2,  31, 1, 0, 1}, /* QE_MUX_MDC               */

        /* QE_MUX_MDIO */
        {2,  30, 3, 0, 2}, /* QE_MUX_MDIO              */

#if defined(CONFIG_SYS_UCC_RGMII_MODE)
        /* UCC_1_RGMII */
        {2, 11, 2, 0, 1}, /* CLK12 */
        {0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
        {0,  1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1      */
        {0,  2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2      */
        {0,  3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3      */
        {0,  6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0      */
        {0,  7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1      */
        {0,  8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2      */
        {0,  9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3      */
        {0,  4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
        {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B    */
        {2,  8, 2, 0, 1}, /* ENET1_GRXCLK              */
        {2, 20, 1, 0, 2}, /* ENET1_GTXCLK              */

        /* UCC_2_RGMII */
        {2, 16, 2, 0, 3}, /* CLK17 */
        {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0      */
        {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1      */
        {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2      */
        {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3      */
        {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0      */
        {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1      */
        {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2      */
        {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3      */
        {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B    */
        {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B    */
        {2,  3, 2, 0, 1}, /* ENET2_GRXCLK              */
        {2,  2, 1, 0, 2}, /* ENET2_GTXCLK              */

        /* UCC_3_RGMII */
        {2, 11, 2, 0, 1}, /* CLK12 */
        {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0      */
        {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1      */
        {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2      */
        {1,  0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3      */
        {1,  3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0      */
        {1,  4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1      */
        {1,  5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2      */
        {1,  6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3      */
        {1,  1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B    */
        {1,  9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B    */
        {2,  9, 2, 0, 2}, /* ENET3_GRXCLK              */
        {2, 25, 1, 0, 2}, /* ENET3_GTXCLK              */

        /* UCC_4_RGMII */
        {2, 16, 2, 0, 3}, /* CLK17 */
        {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0      */
        {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1      */
        {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2      */
        {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3      */
        {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0      */
        {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1      */
        {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2      */
        {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3      */
        {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B    */
        {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B    */
        {2, 17, 2, 0, 2}, /* ENET4_GRXCLK              */
        {2, 24, 1, 0, 2}, /* ENET4_GTXCLK              */

#elif defined(CONFIG_SYS_UCC_RMII_MODE)
        /* UCC_1_RMII */
        {2, 15, 2, 0, 1}, /* CLK16 */
        {0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
        {0,  1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1      */
        {0,  6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0      */
        {0,  7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1      */
        {0,  4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
        {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B    */

        /* UCC_2_RMII */
        {2, 15, 2, 0, 1}, /* CLK16 */
        {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0      */
        {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1      */
        {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0      */
        {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1      */
        {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B    */
        {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B    */

        /* UCC_3_RMII */
        {2, 15, 2, 0, 1}, /* CLK16 */
        {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0      */
        {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1      */
        {1,  3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0      */
        {1,  4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1      */
        {1,  1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B    */
        {1,  9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B    */

        /* UCC_4_RMII */
        {2, 15, 2, 0, 1}, /* CLK16 */
        {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0      */
        {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1      */
        {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0      */
        {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1      */
        {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B    */
        {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B    */
#endif

        /* UART1 is muxed with QE PortF bit [9-12].*/
        {5, 12, 2, 0, 3}, /* UART1_SIN */
        {5, 9,  1, 0, 3}, /* UART1_SOUT */
        {5, 10, 2, 0, 3}, /* UART1_CTS_B */
        {5, 11, 1, 0, 2}, /* UART1_RTS_B */

        /* QE UART                                     */
        {0, 19, 1, 0, 2}, /* QEUART_TX                 */
        {1, 17, 2, 0, 3}, /* QEUART_RX                 */
        {0, 25, 1, 0, 1}, /* QEUART_RTS                */
        {1, 23, 2, 0, 1}, /* QEUART_CTS                */

        /* QE USB                                      */
        {5,  3, 1, 0, 1}, /* USB_OE                    */
        {5,  4, 1, 0, 2}, /* USB_TP                    */
        {5,  5, 1, 0, 2}, /* USB_TN                    */
        {5,  6, 2, 0, 2}, /* USB_RP                    */
        {5,  7, 2, 0, 1}, /* USB_RX                    */
        {5,  8, 2, 0, 1}, /* USB_RN                    */
        {2,  4, 2, 0, 2}, /* CLK5                      */

        /* SPI Flash, M25P40                           */
        {4, 27, 3, 0, 1}, /* SPI_MOSI                  */
        {4, 28, 3, 0, 1}, /* SPI_MISO                  */
        {4, 29, 3, 0, 1}, /* SPI_CLK                   */
        {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO             */

        {0,  0, 0, 0, QE_IOP_TAB_END} /* END of table */
};

void local_bus_init(void);

int board_early_init_f (void)
{
        /*
         * Initialize local bus.
         */
        local_bus_init ();

        enable_8569mds_flash_write();

#ifdef CONFIG_QE
        enable_8569mds_qe_uec();
#endif

#if CONFIG_SYS_I2C2_OFFSET
        /* Enable I2C2 signals instead of SD signals */
        volatile struct ccsr_gur *gur;
        gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
        gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
        gur->plppar1 |= PLPPAR1_I2C2_VAL;
        gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
        gur->plpdir1 |= PLPDIR1_I2C2_VAL;

        disable_8569mds_brd_eeprom_write_protect();
#endif

        return 0;
}

int board_early_init_r(void)
{
        const unsigned int flashbase = CONFIG_SYS_NAND_BASE;
        const u8 flash_esel = 0;

        /*
         * Remap Boot flash to caching-inhibited
         * so that flash can be erased properly.
         */

        /* Flush d-cache and invalidate i-cache of any FLASH data */
        flush_dcache();
        invalidate_icache();

        /* invalidate existing TLB entry for flash */
        disable_tlb(flash_esel);

        set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE,     /* tlb, epn, rpn */
                MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
                0, flash_esel,                          /* ts, esel */
                BOOKE_PAGESZ_64M, 1);                   /* tsize, iprot */

        return 0;
}

int checkboard (void)
{
        printf ("Board: 8569 MDS\n");

        return 0;
}

#if !defined(CONFIG_SPD_EEPROM)
phys_size_t fixed_sdram(void)
{
        volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
        uint d_init;

        out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
        out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
        out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
        out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
        out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
        out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
        out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
        out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
        out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
        out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
        out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
        out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
        out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
        out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
        out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
        out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
        out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
        out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
#if defined (CONFIG_DDR_ECC)
        out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
        out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
        out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
#endif
        udelay(500);

        out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
        d_init = 1;
        debug("DDR - 1st controller: memory initializing\n");
        /*
         * Poll until memory is initialized.
         * 512 Meg at 400 might hit this 200 times or so.
         */
        while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
                udelay(1000);
        }
        debug("DDR: memory initialized\n\n");
        udelay(500);
#endif
        return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
#endif

/*
 * Initialize Local Bus
 */
void
local_bus_init(void)
{
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

        uint clkdiv;
        sys_info_t sysinfo;

        get_sys_info(&sysinfo);
        clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;

        out_be32(&gur->lbiuiplldcr1, 0x00078080);
        if (clkdiv == 16)
                out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
        else if (clkdiv == 8)
                out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
        else if (clkdiv == 4)
                out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);

        out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
}

static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias)
{
        const char *status = "disabled";
        int off;
        int err;

        off = fdt_path_offset(blob, alias);
        if (off < 0) {
                printf("WARNING: could not find %s alias: %s.\n", alias,
                        fdt_strerror(off));
                return;
        }

        err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
        if (err) {
                printf("WARNING: could not set status for serial0: %s.\n",
                        fdt_strerror(err));
                return;
        }
}

/*
 * Because of an erratum in prototype boards it is impossible to use eSDHC
 * without disabling UART0 (which makes it quite easy to 'brick' the board
 * by simply issung 'setenv hwconfig esdhc', and not able to interact with
 * U-Boot anylonger).
 *
 * So, but default we assume that the board is a prototype, which is a most
 * safe assumption. There is no way to determine board revision from a
 * register, so we use hwconfig.
 */

static int prototype_board(void)
{
        if (hwconfig_subarg("board", "rev", NULL))
                return hwconfig_subarg_cmp("board", "rev", "prototype");
        return 1;
}

static int esdhc_disables_uart0(void)
{
        return prototype_board() ||
               hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
}

static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd)
{
        u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
        const char *devtype = "serial";
        const char *compat = "ucc_uart";
        const char *clk = "brg9";
        u32 portnum = 0;
        int off = -1;

        if (!hwconfig("qe_uart"))
                return;

        if (hwconfig("esdhc") && esdhc_disables_uart0()) {
                printf("QE UART: won't enable with esdhc.\n");
                return;
        }

        fdt_board_disable_serial(blob, bd, "serial1");

        while (1) {
                const u32 *idx;
                int len;

                off = fdt_node_offset_by_compatible(blob, off, "ucc_geth");
                if (off < 0) {
                        printf("WARNING: unable to fixup device tree for "
                                "QE UART\n");
                        return;
                }

                idx = fdt_getprop(blob, off, "cell-index", &len);
                if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2))
                        continue;
                break;
        }

        fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1);
        fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1);
        fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1);
        fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1);
        fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum));

        setbits_8(&bcsr[15], BCSR15_QEUART_EN);
}

#ifdef CONFIG_FSL_ESDHC

int board_mmc_init(bd_t *bd)
{
        struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
        u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
        u8 bcsr6 = BCSR6_SD_CARD_1BIT;

        if (!hwconfig("esdhc"))
                return 0;

        printf("Enabling eSDHC...\n"
               "  For eSDHC to function, I2C2 ");
        if (esdhc_disables_uart0()) {
                printf("and UART0 should be disabled.\n");
                printf("  Redirecting stderr, stdout and stdin to UART1...\n");
                console_assign(stderr, "eserial1");
                console_assign(stdout, "eserial1");
                console_assign(stdin, "eserial1");
                printf("Switched to UART1 (initial log has been printed to "
                       "UART0).\n");

                clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK,
                                               PLPPAR1_ESDHC_4BITS_VAL);
                clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK,
                                               PLPDIR1_ESDHC_4BITS_VAL);
                bcsr6 |= BCSR6_SD_CARD_4BITS;
        } else {
                printf("should be disabled.\n");
        }

        /* Assign I2C2 signals to eSDHC. */
        clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
                                       PLPPAR1_ESDHC_VAL);
        clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
                                       PLPDIR1_ESDHC_VAL);

        /* Mux I2C2 (and optionally UART0) signals to eSDHC. */
        setbits_8(&bcsr[6], bcsr6);

        return fsl_esdhc_mmc_init(bd);
}

static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
{
        const char *status = "disabled";
        int off = -1;

        if (!hwconfig("esdhc"))
                return;

        if (esdhc_disables_uart0())
                fdt_board_disable_serial(blob, bd, "serial0");

        while (1) {
                const u32 *idx;
                int len;

                off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
                if (off < 0)
                        break;

                idx = fdt_getprop(blob, off, "cell-index", &len);
                if (!idx || len != sizeof(*idx))
                        continue;

                if (*idx == 1) {
                        fdt_setprop(blob, off, "status", status,
                                    strlen(status) + 1);
                        break;
                }
        }

        if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) {
                off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc");
                if (off < 0) {
                        printf("WARNING: could not find esdhc node\n");
                        return;
                }
                fdt_delprop(blob, off, "sdhci,1-bit-only");
        }
}
#else
static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
#endif

static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
{
        u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;

        if (hwconfig_subarg_cmp("qe_usb", "speed", "low"))
                clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
        else
                setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);

        if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) {
                clrbits_8(&bcsr[17], BCSR17_USBVCC);
                clrbits_8(&bcsr[17], BCSR17_USBMODE);
                do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode",
                                   "peripheral", sizeof("peripheral"), 1);
        } else {
                setbits_8(&bcsr[17], BCSR17_USBVCC);
                setbits_8(&bcsr[17], BCSR17_USBMODE);
        }

        clrbits_8(&bcsr[17], BCSR17_nUSBEN);
}

#ifdef CONFIG_PCI
void pci_init_board(void)
{
#if defined(CONFIG_PQ_MDS_PIB)
        pib_init();
#endif

        fsl_pcie_init_board(0);
}
#endif /* CONFIG_PCI */

#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_SYS_UCC_RMII_MODE)
        int nodeoff, off, err;
        unsigned int val;
        const u32 *ph;
        const u32 *index;

        /* fixup device tree for supporting rmii mode */
        nodeoff = -1;
        while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
                                "ucc_geth")) >= 0) {
                err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
                                                "clk16");
                if (err < 0) {
                        printf("WARNING: could not set tx-clock-name %s.\n",
                                fdt_strerror(err));
                        break;
                }

                err = fdt_fixup_phy_connection(blob, nodeoff,
                                PHY_INTERFACE_MODE_RMII);

                if (err < 0) {
                        printf("WARNING: could not set phy-connection-type "
                                "%s.\n", fdt_strerror(err));
                        break;
                }

                index = fdt_getprop(blob, nodeoff, "cell-index", 0);
                if (index == NULL) {
                        printf("WARNING: could not get cell-index of ucc\n");
                        break;
                }

                ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
                if (ph == NULL) {
                        printf("WARNING: could not get phy-handle of ucc\n");
                        break;
                }

                off = fdt_node_offset_by_phandle(blob, *ph);
                if (off < 0) {
                        printf("WARNING: could not get phy node %s.\n",
                                fdt_strerror(err));
                        break;
                }

                val = 0x7 + *index; /* RMII phy address starts from 0x8 */

                err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
                if (err < 0) {
                        printf("WARNING: could not set reg for phy-handle "
                                "%s.\n", fdt_strerror(err));
                        break;
                }
        }
#endif
        ft_cpu_setup(blob, bd);

        FT_FSL_PCI_SETUP;

        fdt_board_fixup_esdhc(blob, bd);
        fdt_board_fixup_qe_uart(blob, bd);
        fdt_board_fixup_qe_usb(blob, bd);
}
#endif