/*
 * Copyright (C) 2003 ETC s.r.o.
 *
 * This code was inspired by Marius Groeger and Kyle Harris code
 * available in other board ports for U-Boot
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 * Written by Peter Figuli <peposh@etc.sk>, 2003.
 *
 */

#include <common.h>
#include "intel.h"


/*
 * This code should handle CFI FLASH memory device. This code is very
 * minimalistic approach without many essential error handling code as well.
 * Because U-Boot actually is missing smart handling of FLASH device,
 * we just set flash_id to anything else to FLASH_UNKNOW, so common code
 * can call us without any restrictions.
 * TODO: Add CFI Query, to be able to determine FLASH device.
 * TODO: Add error handling code
 * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
 *       hopefully may work with other configurations.
 */

#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
#  define FLASH_BUS vu_char
#  define FLASH_BUS_RET u_char
#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
#    define FLASH_CMD( x ) x
#  else
#    error "With 8bit bus only one chip is allowed"
#  endif


#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
#  define FLASH_BUS vu_short
#  define FLASH_BUS_RET u_short
#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
#    define FLASH_CMD( x ) x
#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
#    define FLASH_CMD( x ) (( x << 8 )| x )
#  else
#    error "With 16bit bus only 1 or 2 chip(s) are allowed"
#  endif


#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
#  define FLASH_BUS vu_long
#  define FLASH_BUS_RET u_long
#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
#    define FLASH_CMD( x ) x
#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
#    define FLASH_CMD( x ) (( x << 16 )| x )
#  elif ( SCB9328_FLASH_INTERLEAVE == 4 )
#    define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
#  else
#    error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
#  endif

#else
#  error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
#endif


flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

static FLASH_BUS_RET flash_status_reg (void)
{

        FLASH_BUS *addr = (FLASH_BUS *) 0;

        *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);

        return *addr;
}

static int flash_ready (ulong timeout)
{
        int ok = 1;
        ulong start;

        start = get_timer(0);
        while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
                   FLASH_CMD (CFI_INTEL_SR_READY)) {
                if (get_timer(start) > timeout && timeout != 0) {
                        ok = 0;
                        break;
                }
        }
        return ok;
}

#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 )
#  error "SCB9328 platform has only one flash bank!"
#endif


ulong flash_init (void)
{
        int i;
        unsigned long address = SCB9328_FLASH_BASE;

        flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
        flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
        flash_info[0].flash_id = INTEL_MANUFACT;
        memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);

        for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) {
                flash_info[0].start[i] = address;
#ifdef SCB9328_FLASH_UNLOCK
                /* Some devices are hw locked after start. */
                *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
                *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
                flash_ready (0);
                *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
#endif
                address += SCB9328_FLASH_SECT_SIZE;
        }

        flash_protect (FLAG_PROTECT_SET,
                                   CONFIG_SYS_FLASH_BASE,
                                   CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
                                   &flash_info[0]);

        flash_protect (FLAG_PROTECT_SET,
                                   CONFIG_ENV_ADDR,
                                   CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);

        return SCB9328_FLASH_BANK_SIZE;
}

void flash_print_info (flash_info_t * info)
{
        int i;

        printf (" Intel vendor\n");
        printf ("  Size: %ld MB in %d Sectors\n",
                        info->size >> 20, info->sector_count);

        printf ("  Sector Start Addresses:");
        for (i = 0; i < info->sector_count; i++) {
                if (!(i % 5)) {
                        printf ("\n");
                }

                printf (" %08lX%s", info->start[i],
                                info->protect[i] ? " (RO)" : "     ");
        }
        printf ("\n");
}


int flash_erase (flash_info_t * info, int s_first, int s_last)
{
        int flag, non_protected = 0, sector;
        int rc = ERR_OK;

        FLASH_BUS *address;

        for (sector = s_first; sector <= s_last; sector++) {
                if (!info->protect[sector]) {
                        non_protected++;
                }
        }

        if (!non_protected) {
                return ERR_PROTECTED;
        }

        /*
         * Disable interrupts which might cause a timeout
         * here. Remember that our exception vectors are
         * at address 0 in the flash, and we don't want a
         * (ticker) exception to happen while the flash
         * chip is in programming mode.
         */
        flag = disable_interrupts ();


        /* Start erase on unprotected sectors */
        for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
                if (info->protect[sector]) {
                        printf ("Protected sector %2d skipping...\n", sector);
                        continue;
                } else {
                        printf ("Erasing sector %2d ... ", sector);
                }

                address = (FLASH_BUS *) (info->start[sector]);

                *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
                *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
                if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) {
                        *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
                        printf ("ok.\n");
                } else {
                        *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
                        rc = ERR_TIMOUT;
                        printf ("timeout! Aborting...\n");
                        break;
                }
                *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
        }
        if (ctrlc ())
                printf ("User Interrupt!\n");

        /* allow flash to settle - wait 10 ms */
        udelay_masked (10000);
        if (flag) {
                enable_interrupts ();
        }

        return rc;
}

static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
{
        FLASH_BUS *address = (FLASH_BUS *) dest;
        int rc = ERR_OK;
        int flag;

        /* Check if Flash is (sufficiently) erased */
        if ((*address & data) != data) {
                return ERR_NOT_ERASED;
        }

        /*
         * Disable interrupts which might cause a timeout
         * here. Remember that our exception vectors are
         * at address 0 in the flash, and we don't want a
         * (ticker) exception to happen while the flash
         * chip is in programming mode.
         */

        flag = disable_interrupts ();

        *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
        *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
        *address = data;

        if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) {
                *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
                rc = ERR_TIMOUT;
                printf ("timeout! Aborting...\n");
        }

        *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
        if (flag) {
                enable_interrupts ();
        }

        return rc;
}

int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
        ulong read_addr, write_addr;
        FLASH_BUS data;
        int i, result = ERR_OK;


        read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
        write_addr = read_addr;
        if (read_addr != addr) {
                data = 0;
                for (i = 0; i < sizeof (FLASH_BUS); i++) {
                        if (read_addr < addr || cnt == 0) {
                                data |= *((uchar *) read_addr) << i * 8;
                        } else {
                                data |= (*src++) << i * 8;
                                cnt--;
                        }
                        read_addr++;
                }
                if ((result = write_data (info, write_addr, data)) != ERR_OK) {
                        return result;
                }
                write_addr += sizeof (FLASH_BUS);
        }
        for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
                if ((result = write_data (info, write_addr,
                                                                  *((FLASH_BUS *) src))) != ERR_OK) {
                        return result;
                }
                write_addr += sizeof (FLASH_BUS);
                src += sizeof (FLASH_BUS);
        }
        if (cnt > 0) {
                read_addr = write_addr;
                data = 0;
                for (i = 0; i < sizeof (FLASH_BUS); i++) {
                        if (cnt > 0) {
                                data |= (*src++) << i * 8;
                                cnt--;
                        } else {
                                data |= *((uchar *) read_addr) << i * 8;
                        }
                        read_addr++;
                }
                if ((result = write_data (info, write_addr, data)) != 0) {
                        return result;
                }
        }
        return ERR_OK;
}