1/* 2 * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. 3 * Dave Liu <daveliu@freescale.com> 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21#ifndef __FSL_SATA_H__ 22#define __FSL_SATA_H__ 23 24#define SATA_HC_MAX_NUM 4 /* Max host controller numbers */ 25#define SATA_HC_MAX_CMD 16 /* Max command queue depth per host controller */ 26#define SATA_HC_MAX_PORT 16 /* Max port number per host controller */ 27 28/* 29* SATA Host Controller Registers 30*/ 31typedef struct fsl_sata_reg { 32 /* SATA command registers */ 33 u32 cqr; /* Command queue register */ 34 u8 res1[0x4]; 35 u32 car; /* Command active register */ 36 u8 res2[0x4]; 37 u32 ccr; /* Command completed register */ 38 u8 res3[0x4]; 39 u32 cer; /* Command error register */ 40 u8 res4[0x4]; 41 u32 der; /* Device error register */ 42 u32 chba; /* Command header base address */ 43 u32 hstatus; /* Host status register */ 44 u32 hcontrol; /* Host control register */ 45 u32 cqpmp; /* Port number queue register */ 46 u32 sig; /* Signature register */ 47 u32 icc; /* Interrupt coalescing control register */ 48 u8 res5[0xc4]; 49 50 /* SATA supperset registers */ 51 u32 sstatus; /* SATA interface status register */ 52 u32 serror; /* SATA interface error register */ 53 u32 scontrol; /* SATA interface control register */ 54 u32 snotification; /* SATA interface notification register */ 55 u8 res6[0x30]; 56 57 /* SATA control status registers */ 58 u32 transcfg; /* Transport layer configuration */ 59 u32 transstatus; /* Transport layer status */ 60 u32 linkcfg; /* Link layer configuration */ 61 u32 linkcfg1; /* Link layer configuration1 */ 62 u32 linkcfg2; /* Link layer configuration2 */ 63 u32 linkstatus; /* Link layer status */ 64 u32 linkstatus1; /* Link layer status1 */ 65 u32 phyctrlcfg; /* PHY control configuration */ 66 u8 res7[0x2b0]; 67 68 /* SATA system control registers */ 69 u32 syspr; /* System priority register - big endian */ 70 u8 res8[0xbec]; 71} __attribute__ ((packed)) fsl_sata_reg_t; 72 73/* HStatus register 74*/ 75#define HSTATUS_ONOFF 0x80000000 /* Online/offline status */ 76#define HSTATUS_FORCE_OFFLINE 0x40000000 /* In process going offline */ 77#define HSTATUS_BIST_ERR 0x20000000 78 79/* Fatal error */ 80#define HSTATUS_MASTER_ERR 0x00004000 81#define HSTATUS_DATA_UNDERRUN 0x00002000 82#define HSTATUS_DATA_OVERRUN 0x00001000 83#define HSTATUS_CRC_ERR_TX 0x00000800 84#define HSTATUS_CRC_ERR_RX 0x00000400 85#define HSTATUS_FIFO_OVERFLOW_TX 0x00000200 86#define HSTATUS_FIFO_OVERFLOW_RX 0x00000100 87#define HSTATUS_FATAL_ERR_ALL (HSTATUS_MASTER_ERR | \ 88 HSTATUS_DATA_UNDERRUN | \ 89 HSTATUS_DATA_OVERRUN | \ 90 HSTATUS_CRC_ERR_TX | \ 91 HSTATUS_CRC_ERR_RX | \ 92 HSTATUS_FIFO_OVERFLOW_TX | \ 93 HSTATUS_FIFO_OVERFLOW_RX) 94/* Interrupt status */ 95#define HSTATUS_FATAL_ERR 0x00000020 96#define HSTATUS_PHY_RDY 0x00000010 97#define HSTATUS_SIGNATURE 0x00000008 98#define HSTATUS_SNOTIFY 0x00000004 99#define HSTATUS_DEVICE_ERR 0x00000002 100#define HSTATUS_CMD_COMPLETE 0x00000001 101 102/* HControl register 103*/ 104#define HCONTROL_ONOFF 0x80000000 /* Online or offline request */ 105#define HCONTROL_FORCE_OFFLINE 0x40000000 /* Force offline request */ 106#define HCONTROL_ENTERPRISE_EN 0x10000000 /* Enterprise mode enabled */ 107#define HCONTROL_HDR_SNOOP 0x00000400 /* Command header snoop */ 108#define HCONTROL_PMP_ATTACHED 0x00000200 /* Port multiplier attached */ 109 110/* Interrupt enable */ 111#define HCONTROL_FATAL_ERR 0x00000020 112#define HCONTROL_PHY_RDY 0x00000010 113#define HCONTROL_SIGNATURE 0x00000008 114#define HCONTROL_SNOTIFY 0x00000004 115#define HCONTROL_DEVICE_ERR 0x00000002 116#define HCONTROL_CMD_COMPLETE 0x00000001 117 118#define HCONTROL_INT_EN_ALL (HCONTROL_FATAL_ERR | \ 119 HCONTROL_PHY_RDY | \ 120 HCONTROL_SIGNATURE | \ 121 HCONTROL_SNOTIFY | \ 122 HCONTROL_DEVICE_ERR | \ 123 HCONTROL_CMD_COMPLETE) 124 125/* SStatus register 126*/ 127#define SSTATUS_IPM_MASK 0x00000780 128#define SSTATUS_IPM_NOPRESENT 0x00000000 129#define SSTATUS_IPM_ACTIVE 0x00000080 130#define SSTATUS_IPM_PATIAL 0x00000100 131#define SSTATUS_IPM_SLUMBER 0x00000300 132 133#define SSTATUS_SPD_MASK 0x000000f0 134#define SSTATUS_SPD_GEN1 0x00000010 135#define SSTATUS_SPD_GEN2 0x00000020 136 137#define SSTATUS_DET_MASK 0x0000000f 138#define SSTATUS_DET_NODEVICE 0x00000000 139#define SSTATUS_DET_DISCONNECT 0x00000001 140#define SSTATUS_DET_CONNECT 0x00000003 141#define SSTATUS_DET_PHY_OFFLINE 0x00000004 142 143/* SControl register 144*/ 145#define SCONTROL_SPM_MASK 0x0000f000 146#define SCONTROL_SPM_GO_PARTIAL 0x00001000 147#define SCONTROL_SPM_GO_SLUMBER 0x00002000 148#define SCONTROL_SPM_GO_ACTIVE 0x00004000 149 150#define SCONTROL_IPM_MASK 0x00000f00 151#define SCONTROL_IPM_NO_RESTRICT 0x00000000 152#define SCONTROL_IPM_PARTIAL 0x00000100 153#define SCONTROL_IPM_SLUMBER 0x00000200 154#define SCONTROL_IPM_PART_SLUM 0x00000300 155 156#define SCONTROL_SPD_MASK 0x000000f0 157#define SCONTROL_SPD_NO_RESTRICT 0x00000000 158#define SCONTROL_SPD_GEN1 0x00000010 159#define SCONTROL_SPD_GEN2 0x00000020 160 161#define SCONTROL_DET_MASK 0x0000000f 162#define SCONTROL_DET_HRESET 0x00000001 163#define SCONTROL_DET_DISABLE 0x00000004 164 165/* TransCfg register 166*/ 167#define TRANSCFG_DFIS_SIZE_SHIFT 16 168#define TRANSCFG_RX_WATER_MARK_MASK 0x0000001f 169 170/* PhyCtrlCfg register 171*/ 172#define PHYCTRLCFG_FPRFTI_MASK 0x00000018 173#define PHYCTRLCFG_LOOPBACK_MASK 0x0000000e 174 175/* 176* Command Header Entry 177*/ 178typedef struct cmd_hdr_entry { 179 u32 cda; /* Command Descriptor Address, 4 bytes aligned */ 180 u32 prde_fis_len; /* Number of PRD entries and FIS length */ 181 u32 ttl; /* Total transfer length */ 182 u32 attribute; /* the attribute of command */ 183} __attribute__ ((packed)) cmd_hdr_entry_t; 184 185#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry) 186 187/* cda 188*/ 189#define CMD_HDR_CDA_ALIGN 4 190 191/* prde_fis_len 192*/ 193#define CMD_HDR_PRD_ENTRY_SHIFT 16 194#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000 195#define CMD_HDR_FIS_LEN_SHIFT 2 196 197/* attribute 198*/ 199#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */ 200#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */ 201#define CMD_HDR_ATTR_SNOOP 0x00000200 /* Snoop enable for all descriptor */ 202#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */ 203#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */ 204#define CMD_HDR_ATTR_BIST 0x00000040 /* BIST - require the host to enter BIST mode */ 205#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */ 206#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */ 207 208/* command type 209*/ 210enum cmd_type { 211 CMD_VENDOR_BIST, 212 CMD_BIST, 213 CMD_RESET, /* SRST or device reset */ 214 CMD_ATAPI, 215 CMD_NCQ, 216 CMD_ATA, /* None of all above */ 217}; 218 219/* 220* Command Header Table 221*/ 222typedef struct cmd_hdr_tbl { 223 cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD]; 224} __attribute__ ((packed)) cmd_hdr_tbl_t; 225 226#define SATA_HC_CMD_HDR_TBL_SIZE sizeof(struct cmd_hdr_tbl) 227#define SATA_HC_CMD_HDR_TBL_ALIGN 4 228 229/* 230* PRD entry - Physical Region Descriptor entry 231*/ 232typedef struct prd_entry { 233 u32 dba; /* Data base address, 4 bytes aligned */ 234 u32 res1; 235 u32 res2; 236 u32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */ 237} __attribute__ ((packed)) prd_entry_t; 238 239#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry) 240 241/* dba 242*/ 243#define PRD_ENTRY_DBA_ALIGN 4 244 245/* ext_c_ddc 246*/ 247#define PRD_ENTRY_EXT 0x80000000 /* extension flag */ 248#ifdef CONFIG_FSL_SATA_V2 249#define PRD_ENTRY_DATA_SNOOP 0x10000000 /* Data snoop enable */ 250#else 251#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Data snoop enable */ 252#endif 253#define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */ 254 255#define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1) 256 257/* 258 * This SATA host controller supports a max of 16 direct PRD entries, but if use 259 * chained indirect PRD entries, then the contollers supports upto a max of 63 260 * entries including direct and indirect PRD entries. 261 * The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15 262 * will be setup as an indirect descriptor, pointing to it's next (contigious) 263 * PRD entries#16. 264 */ 265#define SATA_HC_MAX_PRD 63 /* Max PRD entry numbers per command */ 266#define SATA_HC_MAX_PRD_DIRECT 16 /* Direct PRDT entries */ 267#define SATA_HC_MAX_PRD_USABLE (SATA_HC_MAX_PRD - 1) 268#define SATA_HC_MAX_XFER_LEN 0x4000000 269 270/* 271* PRDT - Physical Region Descriptor Table 272*/ 273typedef struct prdt { 274 prd_entry_t prdt[SATA_HC_MAX_PRD]; 275} __attribute__ ((packed)) prdt_t; 276 277/* 278* Command Descriptor 279*/ 280#define SATA_HC_CMD_DESC_CFIS_SIZE 32 /* bytes */ 281#define SATA_HC_CMD_DESC_SFIS_SIZE 32 /* bytes */ 282#define SATA_HC_CMD_DESC_ACMD_SIZE 16 /* bytes */ 283#define SATA_HC_CMD_DESC_RES 16 /* bytes */ 284 285typedef struct cmd_desc { 286 u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE]; 287 u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE]; 288 u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE]; 289 u8 res[SATA_HC_CMD_DESC_RES]; 290 prd_entry_t prdt[SATA_HC_MAX_PRD]; 291} __attribute__ ((packed)) cmd_desc_t; 292 293#define SATA_HC_CMD_DESC_SIZE sizeof(struct cmd_desc) 294#define SATA_HC_CMD_DESC_ALIGN 4 295 296/* 297 * SATA device driver info 298 */ 299typedef struct fsl_sata_info { 300 u32 sata_reg_base; 301 u32 flags; 302} fsl_sata_info_t; 303 304#define FLAGS_DMA 0x00000000 305#define FLAGS_FPDMA 0x00000001 306 307/* 308 * SATA device driver struct 309 */ 310typedef struct fsl_sata { 311 char name[12]; 312 fsl_sata_reg_t *reg_base; /* the base address of controller register */ 313 void *cmd_hdr_tbl_offset; /* alloc address of command header table */ 314 cmd_hdr_tbl_t *cmd_hdr; /* aligned address of command header table */ 315 void *cmd_desc_offset; /* alloc address of command descriptor */ 316 cmd_desc_t *cmd_desc; /* aligned address of command descriptor */ 317 int link; /* PHY link status */ 318 /* device attribute */ 319 int ata_device_type; /* device type */ 320 int lba48; 321 int queue_depth; /* Max NCQ queue depth */ 322 u16 pio; 323 u16 mwdma; 324 u16 udma; 325 int wcache; 326 int flush; 327 int flush_ext; 328} fsl_sata_t; 329 330#define READ_CMD 0 331#define WRITE_CMD 1 332 333#endif /* __FSL_SATA_H__ */ 334