LXR uboot/arch/arm/include/asm/arch-at91/at91

   1/*
   2 * [origin: Linux kernel include/asm-arm/arch-at91/at91_spi.h]
   3 *
   4 * Copyright (C) 2005 Ivan Kokshaysky
   5 * Copyright (C) SAN People
   6 *
   7 * Serial Peripheral Interface (SPI) registers.
   8 * Based on AT91RM9200 datasheet revision E.
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2 of the License, or
  13 * (at your option) any later version.
  14 */
  15
  16#ifndef AT91_SPI_H
  17#define AT91_SPI_H
  18
  19#include <asm/arch/at91_pdc.h>
  20
  21typedef struct at91_spi {
  22        u32             cr;             /* 0x00 Control Register */
  23        u32             mr;             /* 0x04 Mode Register */
  24        u32             rdr;            /* 0x08 Receive Data Register */
  25        u32             tdr;            /* 0x0C Transmit Data Register */
  26        u32             sr;             /* 0x10 Status Register */
  27        u32             ier;            /* 0x14 Interrupt Enable Register */
  28        u32             idr;            /* 0x18 Interrupt Disable Register */
  29        u32             imr;            /* 0x1C Interrupt Mask Register */
  30        u32             reserve1[4];
  31        u32             csr[4];         /* 0x30 Chip Select Register 0-3 */
  32        u32             reserve2[48];
  33        at91_pdc_t      pdc;
  34} at91_spi_t;
  35
  36#ifdef CONFIG_ATMEL_LEGACY
  37
  38#define AT91_SPI_CR                     0x00            /* Control Register */
  39#define         AT91_SPI_SPIEN          (1 <<  0)               /* SPI Enable */
  40#define         AT91_SPI_SPIDIS         (1 <<  1)               /* SPI Disable */
  41#define         AT91_SPI_SWRST          (1 <<  7)               /* SPI Software Reset */
  42#define         AT91_SPI_LASTXFER       (1 << 24)               /* Last Transfer [SAM9261 only] */
  43
  44#define AT91_SPI_MR                     0x04            /* Mode Register */
  45#define         AT91_SPI_MSTR           (1    <<  0)            /* Master/Slave Mode */
  46#define         AT91_SPI_PS             (1    <<  1)            /* Peripheral Select */
  47#define                 AT91_SPI_PS_FIXED       (0 << 1)
  48#define                 AT91_SPI_PS_VARIABLE    (1 << 1)
  49#define         AT91_SPI_PCSDEC         (1    <<  2)            /* Chip Select Decode */
  50#define         AT91_SPI_DIV32          (1    <<  3)            /* Clock Selection [AT91RM9200 only] */
  51#define         AT91_SPI_MODFDIS        (1    <<  4)            /* Mode Fault Detection */
  52#define         AT91_SPI_LLB            (1    <<  7)            /* Local Loopback Enable */
  53#define         AT91_SPI_PCS            (0xf  << 16)            /* Peripheral Chip Select */
  54#define         AT91_SPI_DLYBCS         (0xff << 24)            /* Delay Between Chip Selects */
  55
  56#define AT91_SPI_RDR            0x08                    /* Receive Data Register */
  57#define         AT91_SPI_RD             (0xffff <<  0)          /* Receive Data */
  58#define         AT91_SPI_PCS            (0xf    << 16)          /* Peripheral Chip Select */
  59
  60#define AT91_SPI_TDR            0x0c                    /* Transmit Data Register */
  61#define         AT91_SPI_TD             (0xffff <<  0)          /* Transmit Data */
  62#define         AT91_SPI_PCS            (0xf    << 16)          /* Peripheral Chip Select */
  63#define         AT91_SPI_LASTXFER       (1      << 24)          /* Last Transfer [SAM9261 only] */
  64
  65#define AT91_SPI_SR             0x10                    /* Status Register */
  66#define         AT91_SPI_RDRF           (1 <<  0)               /* Receive Data Register Full */
  67#define         AT91_SPI_TDRE           (1 <<  1)               /* Transmit Data Register Full */
  68#define         AT91_SPI_MODF           (1 <<  2)               /* Mode Fault Error */
  69#define         AT91_SPI_OVRES          (1 <<  3)               /* Overrun Error Status */
  70#define         AT91_SPI_ENDRX          (1 <<  4)               /* End of RX buffer */
  71#define         AT91_SPI_ENDTX          (1 <<  5)               /* End of TX buffer */
  72#define         AT91_SPI_RXBUFF         (1 <<  6)               /* RX Buffer Full */
  73#define         AT91_SPI_TXBUFE         (1 <<  7)               /* TX Buffer Empty */
  74#define         AT91_SPI_NSSR           (1 <<  8)               /* NSS Rising [SAM9261 only] */
  75#define         AT91_SPI_TXEMPTY        (1 <<  9)               /* Transmission Register Empty [SAM9261 only] */
  76#define         AT91_SPI_SPIENS         (1 << 16)               /* SPI Enable Status */
  77
  78#define AT91_SPI_IER            0x14                    /* Interrupt Enable Register */
  79#define AT91_SPI_IDR            0x18                    /* Interrupt Disable Register */
  80#define AT91_SPI_IMR            0x1c                    /* Interrupt Mask Register */
  81
  82#define AT91_SPI_CSR(n)         (0x30 + ((n) * 4))      /* Chip Select Registers 0-3 */
  83#define         AT91_SPI_CPOL           (1    <<  0)            /* Clock Polarity */
  84#define         AT91_SPI_NCPHA          (1    <<  1)            /* Clock Phase */
  85#define         AT91_SPI_CSAAT          (1    <<  3)            /* Chip Select Active After Transfer [SAM9261 only] */
  86#define         AT91_SPI_BITS           (0xf  <<  4)            /* Bits Per Transfer */
  87#define                 AT91_SPI_BITS_8         (0 << 4)
  88#define                 AT91_SPI_BITS_9         (1 << 4)
  89#define                 AT91_SPI_BITS_10        (2 << 4)
  90#define                 AT91_SPI_BITS_11        (3 << 4)
  91#define                 AT91_SPI_BITS_12        (4 << 4)
  92#define                 AT91_SPI_BITS_13        (5 << 4)
  93#define                 AT91_SPI_BITS_14        (6 << 4)
  94#define                 AT91_SPI_BITS_15        (7 << 4)
  95#define                 AT91_SPI_BITS_16        (8 << 4)
  96#define         AT91_SPI_SCBR           (0xff <<  8)            /* Serial Clock Baud Rate */
  97#define         AT91_SPI_DLYBS          (0xff << 16)            /* Delay before SPCK */
  98#define         AT91_SPI_DLYBCT         (0xff << 24)            /* Delay between Consecutive Transfers */
  99
 100#define AT91_SPI_RPR            0x0100                  /* Receive Pointer Register */
 101
 102#define AT91_SPI_RCR            0x0104                  /* Receive Counter Register */
 103
 104#define AT91_SPI_TPR            0x0108                  /* Transmit Pointer Register */
 105
 106#define AT91_SPI_TCR            0x010c                  /* Transmit Counter Register */
 107
 108#define AT91_SPI_RNPR           0x0110                  /* Receive Next Pointer Register */
 109
 110#define AT91_SPI_RNCR           0x0114                  /* Receive Next Counter Register */
 111
 112#define AT91_SPI_TNPR           0x0118                  /* Transmit Next Pointer Register */
 113
 114#define AT91_SPI_TNCR           0x011c                  /* Transmit Next Counter Register */
 115
 116#define AT91_SPI_PTCR           0x0120                  /* PDC Transfer Control Register */
 117#define         AT91_SPI_RXTEN          (0x1 << 0)              /* Receiver Transfer Enable */
 118#define         AT91_SPI_RXTDIS         (0x1 << 1)              /* Receiver Transfer Disable */
 119#define         AT91_SPI_TXTEN          (0x1 << 8)              /* Transmitter Transfer Enable */
 120#define         AT91_SPI_TXTDIS         (0x1 << 9)              /* Transmitter Transfer Disable */
 121
 122#define AT91_SPI_PTSR           0x0124                  /* PDC Transfer Status Register */
 123
 124#endif /* CONFIG_AT91_LEGACY */
 125
 126#endif
 127