uboot/include/configs/pb1x00.h
<<
>>
Prefs
   1/*
   2 * (C) Copyright 2003
   3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 *
   5 * See file CREDITS for list of people who contributed to this
   6 * project.
   7 *
   8 * This program is free software; you can redistribute it and/or
   9 * modify it under the terms of the GNU General Public License as
  10 * published by the Free Software Foundation; either version 2 of
  11 * the License, or (at your option) any later version.
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 * MA 02111-1307 USA
  22 */
  23
  24/*
  25 * This file contains the configuration parameters for the dbau1x00 board.
  26 */
  27
  28#ifndef __CONFIG_H
  29#define __CONFIG_H
  30
  31#define CONFIG_MIPS32           1  /* MIPS32 CPU core   */
  32#define CONFIG_PB1X00           1
  33#define CONFIG_SOC_AU1X00       1  /* alchemy series cpu */
  34
  35#ifdef CONFIG_PB1000
  36#define CONFIG_SOC_AU1000       1
  37#else
  38#ifdef CONFIG_PB1100
  39#define CONFIG_SOC_AU1100       1
  40#else
  41#ifdef CONFIG_PB1500
  42#define CONFIG_SOC_AU1500       1
  43#else
  44#error "No valid board set"
  45#endif
  46#endif
  47#endif
  48
  49#define CONFIG_SYS_LITTLE_ENDIAN
  50
  51#define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
  52
  53#define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds     */
  54
  55#define CONFIG_BAUDRATE         115200
  56
  57#define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  58#undef  CONFIG_BOOTARGS
  59
  60#define CONFIG_EXTRA_ENV_SETTINGS                                       \
  61        "addmisc=setenv bootargs ${bootargs} "                          \
  62                "console=ttyS0,${baudrate} "                            \
  63                "panic=1\0"                                             \
  64        "bootfile=/vmlinux.img\0"                               \
  65        "load=tftp 80500000 ${u-boot}\0"                                \
  66        ""
  67/* Boot from NFS root */
  68#define CONFIG_BOOTCOMMAND      "bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm"
  69
  70/*
  71 * Miscellaneous configurable options
  72 */
  73#define CONFIG_SYS_LONGHELP                             /* undef to save memory      */
  74#define CONFIG_SYS_PROMPT               "Pb1x00 # "     /* Monitor Command Prompt    */
  75#define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size   */
  76#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
  77#define CONFIG_SYS_MAXARGS              16              /* max number of command args*/
  78
  79#define CONFIG_SYS_MALLOC_LEN           128*1024
  80
  81#define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
  82
  83#define CONFIG_SYS_MIPS_TIMER_FREQ      396000000
  84
  85#define CONFIG_SYS_HZ                   1000
  86
  87#define CONFIG_SYS_SDRAM_BASE           0x80000000     /* Cached addr */
  88
  89#define CONFIG_SYS_LOAD_ADDR            0x81000000     /* default load address  */
  90
  91#define CONFIG_SYS_MEMTEST_START        0x80100000
  92#undef CONFIG_SYS_MEMTEST_START
  93#define CONFIG_SYS_MEMTEST_START       0x80200000
  94#define CONFIG_SYS_MEMTEST_END          0x83800000
  95
  96/*-----------------------------------------------------------------------
  97 * FLASH and environment organization
  98 */
  99#define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
 100#define CONFIG_SYS_MAX_FLASH_SECT       (128)   /* max number of sectors on one chip */
 101
 102#define PHYS_FLASH_1            0xbec00000 /* Flash Bank #1 */
 103#define PHYS_FLASH_2            0xbfc00000 /* Flash Bank #2 */
 104
 105/* The following #defines are needed to get flash environment right */
 106#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 107#define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 108
 109#define CONFIG_SYS_INIT_SP_OFFSET       0x4000000
 110
 111/* We boot from this flash, selected with dip switch */
 112#define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_2
 113
 114/* timeout values are in ticks */
 115#define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 116#define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 117
 118#define CONFIG_ENV_IS_NOWHERE   1
 119
 120/* Address and size of Primary Environment Sector       */
 121#define CONFIG_ENV_ADDR         0xB0030000
 122#define CONFIG_ENV_SIZE         0x10000
 123
 124#define CONFIG_FLASH_16BIT
 125
 126#define CONFIG_NR_DRAM_BANKS    2
 127
 128
 129#define CONFIG_MEMSIZE_IN_BYTES
 130
 131
 132/*---USB -------------------------------------------*/
 133#if 0
 134#define CONFIG_USB_OHCI
 135#define CONFIG_USB_STORAGE
 136#define CONFIG_DOS_PARTITION
 137#endif
 138
 139/*---ATA PCMCIA ------------------------------------*/
 140#if 0
 141#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
 142#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
 143#define CONFIG_PCMCIA_SLOT_A
 144
 145#define CONFIG_ATAPI 1
 146#define CONFIG_MAC_PARTITION 1
 147
 148/* We run CF in "true ide" mode or a harddrive via pcmcia */
 149#define CONFIG_IDE_PCMCIA 1
 150
 151/* We only support one slot for now */
 152#define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 153#define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 154
 155#undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 156#undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 157
 158#define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 159
 160#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 161
 162/* Offset for data I/O                  */
 163#define CONFIG_SYS_ATA_DATA_OFFSET     8
 164
 165/* Offset for normal register accesses  */
 166#define CONFIG_SYS_ATA_REG_OFFSET      0
 167
 168/* Offset for alternate registers       */
 169#define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 170
 171#endif
 172/*-----------------------------------------------------------------------
 173 * Cache Configuration
 174 */
 175#define CONFIG_SYS_DCACHE_SIZE          16384
 176#define CONFIG_SYS_ICACHE_SIZE          16384
 177#define CONFIG_SYS_CACHELINE_SIZE       32
 178
 179
 180/*
 181 * BOOTP options
 182 */
 183#define CONFIG_BOOTP_BOOTFILESIZE
 184#define CONFIG_BOOTP_BOOTPATH
 185#define CONFIG_BOOTP_GATEWAY
 186#define CONFIG_BOOTP_HOSTNAME
 187
 188
 189/*
 190 * Command line configuration.
 191 */
 192#include <config_cmd_default.h>
 193
 194#define CONFIG_CMD_DHCP
 195#define CONFIG_CMD_ELF
 196#define CONFIG_CMD_MII
 197#define CONFIG_CMD_PING
 198
 199#undef CONFIG_CMD_SAVEENV
 200#undef CONFIG_CMD_FAT
 201#undef CONFIG_CMD_FLASH
 202#undef CONFIG_CMD_FPGA
 203#undef CONFIG_CMD_IDE
 204#undef CONFIG_CMD_LOADS
 205#undef CONFIG_CMD_RUN
 206#undef CONFIG_CMD_LOADB
 207#undef CONFIG_CMD_ELF
 208#undef CONFIG_CMD_BDI
 209#undef CONFIG_CMD_BEDBUG
 210
 211#endif  /* __CONFIG_H */
 212