1/* 2 * Copyright (C) 2012 Renesas Electronics Europe Ltd. 3 * Copyright (C) 2012 Phil Edworthy 4 * Copyright (C) 2008 Renesas Solutions Corp. 5 * Copyright (C) 2008 Nobuhiro Iwamatsu 6 * 7 * Based on u-boot/board/rsk7264/rsk7264.c 8 * 9 * This file is released under the terms of GPL v2 and any later version. 10 * See the file COPYING in the root directory of the source tree for details. 11 */ 12 13#include <common.h> 14#include <net.h> 15#include <netdev.h> 16#include <asm/io.h> 17#include <asm/processor.h> 18 19DECLARE_GLOBAL_DATA_PTR; 20 21int checkboard(void) 22{ 23 puts("BOARD: Renesas RSK7269\n"); 24 return 0; 25} 26 27int board_init(void) 28{ 29 return 0; 30} 31 32int dram_init(void) 33{ 34 gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; 35 gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; 36 printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024)); 37 return 0; 38} 39 40void led_set_state(unsigned short value) 41{ 42} 43 44/* 45 * The RSK board has the SMSC89218 wired up 'incorrectly'. 46 * Byte-swapping is necessary, and so poor performance is inevitable. 47 * This problem cannot evade by the swap function of CHIP, this can 48 * evade by software Byte-swapping. 49 * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push 50 * functions necessary to solve this problem. 51 */ 52u32 pkt_data_pull(struct eth_device *dev, u32 addr) 53{ 54 volatile u16 *addr_16 = (u16 *)(dev->iobase + addr); 55 return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\ 56 | swab16(*(addr_16 + 1)); 57} 58 59void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) 60{ 61 addr += dev->iobase; 62 *(volatile u16 *)(addr + 2) = swab16((u16)val); 63 *(volatile u16 *)(addr) = swab16((u16)(val >> 16)); 64} 65 66int board_eth_init(bd_t *bis) 67{ 68 int rc = 0; 69#ifdef CONFIG_SMC911X 70 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); 71#endif 72 return rc; 73} 74