/*
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 * based on: cmd_jffs2.c
 *
 *      Add support for a CRAMFS located in RAM
 */


/*
 * CRAMFS support
 */
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <linux/list.h>
#include <linux/ctype.h>
#include <jffs2/jffs2.h>
#include <jffs2/load_kernel.h>
#include <cramfs/cramfs_fs.h>

/* enable/disable debugging messages */
#define DEBUG_CRAMFS
#undef  DEBUG_CRAMFS

#ifdef  DEBUG_CRAMFS
# define DEBUGF(fmt, args...)   printf(fmt ,##args)
#else
# define DEBUGF(fmt, args...)
#endif

#ifdef CONFIG_CRAMFS_CMDLINE
#include <flash.h>

#ifdef CONFIG_SYS_NO_FLASH
# define OFFSET_ADJUSTMENT      0
#else
# define OFFSET_ADJUSTMENT      (flash_info[id.num].start[0])
#endif

#ifndef CONFIG_CMD_JFFS2
#include <linux/stat.h>
char *mkmodestr(unsigned long mode, char *str)
{
        static const char *l = "xwr";
        int mask = 1, i;
        char c;

        switch (mode & S_IFMT) {
                case S_IFDIR:    str[0] = 'd'; break;
                case S_IFBLK:    str[0] = 'b'; break;
                case S_IFCHR:    str[0] = 'c'; break;
                case S_IFIFO:    str[0] = 'f'; break;
                case S_IFLNK:    str[0] = 'l'; break;
                case S_IFSOCK:   str[0] = 's'; break;
                case S_IFREG:    str[0] = '-'; break;
                default:         str[0] = '?';
        }

        for(i = 0; i < 9; i++) {
                c = l[i%3];
                str[9-i] = (mode & mask)?c:'-';
                mask = mask<<1;
        }

        if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S';
        if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S';
        if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T';
        str[10] = '\0';
        return str;
}
#endif /* CONFIG_CMD_JFFS2 */

extern int cramfs_check (struct part_info *info);
extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);

/***************************************************/
/* U-boot commands                                 */
/***************************************************/

/**
 * Routine implementing fsload u-boot command. This routine tries to load
 * a requested file from cramfs filesystem at location 'cramfsaddr'.
 * cramfsaddr is an evironment variable.
 *
 * @param cmdtp command internal data
 * @param flag command flag
 * @param argc number of arguments supplied to the command
 * @param argv arguments list
 * @return 0 on success, 1 otherwise
 */
int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        char *filename;
        int size;
        ulong offset = load_addr;

        struct part_info part;
        struct mtd_device dev;
        struct mtdids id;

        ulong addr;
        addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);

        /* hack! */
        /* cramfs_* only supports NOR flash chips */
        /* fake the device type */
        id.type = MTD_DEV_TYPE_NOR;
        id.num = 0;
        dev.id = &id;
        part.dev = &dev;
        /* fake the address offset */
        part.offset = addr - OFFSET_ADJUSTMENT;

        /* pre-set Boot file name */
        if ((filename = getenv("bootfile")) == NULL) {
                filename = "uImage";
        }

        if (argc == 2) {
                filename = argv[1];
        }
        if (argc == 3) {
                offset = simple_strtoul(argv[1], NULL, 0);
                load_addr = offset;
                filename = argv[2];
        }

        size = 0;
        if (cramfs_check(&part))
                size = cramfs_load ((char *) offset, &part, filename);

        if (size > 0) {
                char buf[10];
                printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n",
                        size, offset);
                sprintf(buf, "%x", size);
                setenv("filesize", buf);
        } else {
                printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename);
        }

        return !(size > 0);
}

/**
 * Routine implementing u-boot ls command which lists content of a given
 * directory at location 'cramfsaddr'.
 * cramfsaddr is an evironment variable.
 *
 * @param cmdtp command internal data
 * @param flag command flag
 * @param argc number of arguments supplied to the command
 * @param argv arguments list
 * @return 0 on success, 1 otherwise
 */
int do_cramfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        char *filename = "/";
        int ret;
        struct part_info part;
        struct mtd_device dev;
        struct mtdids id;

        ulong addr;
        addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);

        /* hack! */
        /* cramfs_* only supports NOR flash chips */
        /* fake the device type */
        id.type = MTD_DEV_TYPE_NOR;
        id.num = 0;
        dev.id = &id;
        part.dev = &dev;
        /* fake the address offset */
        part.offset = addr - OFFSET_ADJUSTMENT;

        if (argc == 2)
                filename = argv[1];

        ret = 0;
        if (cramfs_check(&part))
                ret = cramfs_ls (&part, filename);

        return ret ? 0 : 1;
}

/* command line only */

/***************************************************/
U_BOOT_CMD(
        cramfsload,     3,      0,      do_cramfs_load,
        "load binary file from a filesystem image",
        "[ off ] [ filename ]\n"
        "    - load binary file from address 'cramfsaddr'\n"
        "      with offset 'off'\n"
);
U_BOOT_CMD(
        cramfsls,       2,      1,      do_cramfs_ls,
        "list files in a directory (default /)",
        "[ directory ]\n"
        "    - list files in a directory.\n"
);

#endif /* #ifdef CONFIG_CRAMFS_CMDLINE */

/***************************************************/