1/* 2**===================================================================== 3** 4** Copyright (C) 2000, 2001, 2002, 2003 5** The LEOX team <team@leox.org>, http://www.leox.org 6** 7** LEOX.org is about the development of free hardware and software resources 8** for system on chip. 9** 10** Description: U-Boot port on the LEOX's ELPT860 CPU board 11** ~~~~~~~~~~~ 12** 13**===================================================================== 14** 15** This program is free software; you can redistribute it and/or 16** modify it under the terms of the GNU General Public License as 17** published by the Free Software Foundation; either version 2 of 18** the License, or (at your option) any later version. 19** 20** This program is distributed in the hope that it will be useful, 21** but WITHOUT ANY WARRANTY; without even the implied warranty of 22** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23** GNU General Public License for more details. 24** 25** You should have received a copy of the GNU General Public License 26** along with this program; if not, write to the Free Software 27** Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28** MA 02111-1307 USA 29** 30**===================================================================== 31*/ 32 33/* 34 * board/config.h - configuration options, board specific 35 */ 36 37#ifndef __CONFIG_H 38#define __CONFIG_H 39 40 41/* 42 * High Level Configuration Options 43 * (easy to change) 44 */ 45 46#define CONFIG_MPC860 1 /* It's a MPC860, in fact a 860T CPU */ 47#define CONFIG_MPC860T 1 48#define CONFIG_ELPT860 1 /* ...on a LEOX's ELPT860 CPU board */ 49 50#define CONFIG_SYS_TEXT_BASE 0x02000000 51 52#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ 53#undef CONFIG_8xx_CONS_SMC2 54#undef CONFIG_8xx_CONS_NONE 55 56#define CONFIG_CLOCKS_IN_MHZ 1 /* Clock passed to Linux (<2.4.5) in MHz */ 57#define CONFIG_8xx_GCLK_FREQ 50000000 /* MPC860T runs at 50MHz */ 58 59#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ 60 61#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ 62#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ 63 64/* BOOT arguments */ 65#define CONFIG_PREBOOT \ 66 "echo;" \ 67 "echo Type \"run nfsboot\" to mount root filesystem over NFS;" \ 68 "echo" 69 70#undef CONFIG_BOOTARGS 71 72#define CONFIG_EXTRA_ENV_SETTINGS \ 73 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 74 "rootargs=setenv rootpath /tftp/${ipaddr}\0" \ 75 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 76 "nfsroot=${serverip}:${rootpath}\0" \ 77 "addip=setenv bootargs ${bootargs} " \ 78 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 79 ":${hostname}:eth0:off panic=1\0" \ 80 "ramboot=tftp 400000 /home/paugaml/pMulti;" \ 81 "run ramargs;bootm\0" \ 82 "nfsboot=tftp 400000 /home/paugaml/uImage;" \ 83 "run rootargs;run nfsargs;run addip;bootm\0" \ 84 "" 85#define CONFIG_BOOTCOMMAND "run ramboot" 86 87/* 88 * BOOTP options 89 */ 90#define CONFIG_BOOTP_SUBNETMASK 91#define CONFIG_BOOTP_GATEWAY 92#define CONFIG_BOOTP_HOSTNAME 93#define CONFIG_BOOTP_BOOTPATH 94#define CONFIG_BOOTP_BOOTFILESIZE 95 96 97#undef CONFIG_WATCHDOG /* watchdog disabled */ 98#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ 99#undef CONFIG_RTC_MPC8xx /* internal RTC MPC8xx unused */ 100#define CONFIG_RTC_DS164x 1 /* RTC is a Dallas DS1646 */ 101 102#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 103#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ 104 105 106/* 107 * Command line configuration. 108 */ 109#include <config_cmd_default.h> 110 111#define CONFIG_CMD_ASKENV 112#define CONFIG_CMD_DATE 113 114 115/* 116 * Miscellaneous configurable options 117 */ 118#define CONFIG_SYS_LONGHELP /* undef to save memory */ 119#define CONFIG_SYS_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */ 120 121#if defined(CONFIG_CMD_KGDB) 122# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 123#else 124# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 125#endif 126 127#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 128#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 129#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 130 131#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ 132#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ 133 134#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ 135 136#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ 137 138/* 139 * Environment Variables and Storages 140 */ 141#define CONFIG_ENV_OVERWRITE 1 /* Allow Overwrite of serial# & ethaddr */ 142 143#undef CONFIG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */ 144#undef CONFIG_ENV_IS_IN_EEPROM /* Environment is in I2C EEPROM */ 145#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment is in FLASH */ 146 147#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 bps */ 148 149#define CONFIG_ETHADDR 00:01:77:00:60:40 150#define CONFIG_IPADDR 192.168.0.30 151#define CONFIG_NETMASK 255.255.255.0 152 153#define CONFIG_SERVERIP 192.168.0.1 154#define CONFIG_GATEWAYIP 192.168.0.1 155 156/* 157 * Low Level Configuration Settings 158 * (address mappings, register initial values, etc.) 159 * You should know what you are doing if you make changes here. 160 */ 161 162/*----------------------------------------------------------------------- 163 * Internal Memory Mapped Register 164 */ 165#define CONFIG_SYS_IMMR 0xFF000000 166 167/*----------------------------------------------------------------------- 168 * Definitions for initial stack pointer and data area (in DPRAM) 169 */ 170#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR 171#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ 172#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 173#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 174 175/*----------------------------------------------------------------------- 176 * Start addresses for the final memory configuration 177 * (Set up by the startup code) 178 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 179 */ 180#define CONFIG_SYS_SDRAM_BASE 0x00000000 181#define CONFIG_SYS_FLASH_BASE 0x02000000 182#define CONFIG_SYS_NVRAM_BASE 0x03000000 183 184#if defined(CONFIG_ENV_IS_IN_FLASH) 185# if defined(DEBUG) 186# define CONFIG_SYS_MONITOR_LEN (320 << 10) /* Reserve 320 kB for Monitor */ 187# else 188# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 189# endif 190#else 191# if defined(DEBUG) 192# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 193# else 194# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ 195# endif 196#endif 197 198#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 199#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 200 201/* 202 * For booting Linux, the board info and command line data 203 * have to be in the first 8 MB of memory, since this is 204 * the maximum mapped by the Linux kernel during initialization. 205 */ 206#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 207 208/*----------------------------------------------------------------------- 209 * FLASH organization 210 */ 211#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 212#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ 213 214#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 215#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 216 217#if defined(CONFIG_ENV_IS_IN_FLASH) 218# define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ 219# define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ 220#endif 221 222/*----------------------------------------------------------------------- 223 * NVRAM organization 224 */ 225#define CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_BASE /* Base address of NVRAM area */ 226#define CONFIG_SYS_NVRAM_SIZE ((128*1024)-8) /* clock regs resident in the */ 227 /* 8 top NVRAM locations */ 228 229#if defined(CONFIG_ENV_IS_IN_NVRAM) 230# define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE /* Base address of NVRAM area */ 231# define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ 232#endif 233 234/*----------------------------------------------------------------------- 235 * Cache Configuration 236 */ 237#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ 238 239#if defined(CONFIG_CMD_KGDB) 240# define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ 241#endif 242 243/*----------------------------------------------------------------------- 244 * SYPCR - System Protection Control 11-9 245 * SYPCR can only be written once after reset! 246 *----------------------------------------------------------------------- 247 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze 248 */ 249#if defined(CONFIG_WATCHDOG) 250# define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ 251 SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) 252#else 253# define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ 254 SYPCR_SWP) 255#endif 256 257/*----------------------------------------------------------------------- 258 * SUMCR - SIU Module Configuration 11-6 259 *----------------------------------------------------------------------- 260 * PCMCIA config., multi-function pin tri-state 261 */ 262#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11) 263 264/*----------------------------------------------------------------------- 265 * TBSCR - Time Base Status and Control 11-26 266 *----------------------------------------------------------------------- 267 * Clear Reference Interrupt Status, Timebase freezing enabled 268 */ 269#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) 270 271/*----------------------------------------------------------------------- 272 * RTCSC - Real-Time Clock Status and Control Register 11-27 273 *----------------------------------------------------------------------- 274 * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC 275 * enabled 276 */ 277#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) 278 279/*----------------------------------------------------------------------- 280 * PISCR - Periodic Interrupt Status and Control 11-31 281 *----------------------------------------------------------------------- 282 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled 283 */ 284#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) 285 286/*----------------------------------------------------------------------- 287 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 288 *----------------------------------------------------------------------- 289 * Reset PLL lock status sticky bit, timer expired status bit and timer 290 * interrupt status bit - leave PLL multiplication factor unchanged ! 291 */ 292#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) 293 294/*----------------------------------------------------------------------- 295 * SCCR - System Clock and reset Control Register 15-27 296 *----------------------------------------------------------------------- 297 * Set clock output, timebase and RTC source and divider, 298 * power management and some other internal clocks 299 */ 300#define SCCR_MASK SCCR_EBDF11 301#define CONFIG_SYS_SCCR (SCCR_TBS | \ 302 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ 303 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ 304 SCCR_DFALCD00) 305 306/*----------------------------------------------------------------------- 307 * Chip Selects + SDRAM timings + Memory Periodic Timer Prescaler 308 *----------------------------------------------------------------------- 309 * 310 */ 311#ifdef DEBUG 312# define CONFIG_SYS_DER 0xFFE7400F /* Debug Enable Register */ 313#else 314# define CONFIG_SYS_DER 0 315#endif 316 317/* 318 * Init Memory Controller: 319 * ~~~~~~~~~~~~~~~~~~~~~~ 320 * 321 * BR0 and OR0 (FLASH) 322 */ 323 324#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ 325 326/* used to re-map FLASH both when starting from SRAM or FLASH: 327 * restrict access enough to keep SRAM working (if any) 328 * but not too much to meddle with FLASH accesses 329 */ 330#define CONFIG_SYS_PRELIM_OR_AM 0xFF000000 /* 16 MB between each CSx */ 331 332/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0 */ 333#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK) 334 335#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) 336#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) 337 338/* 339 * BR1 and OR1 (SDRAM) 340 * 341 */ 342#define SDRAM_BASE1_PRELIM CONFIG_SYS_SDRAM_BASE /* SDRAM bank #0 */ 343#define SDRAM_MAX_SIZE 0x02000000 /* 32 MB MAX for CS1 */ 344 345/* SDRAM timing: */ 346#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000000 347 348#define CONFIG_SYS_OR1_PRELIM ((2 * CONFIG_SYS_PRELIM_OR_AM) | CONFIG_SYS_OR_TIMING_SDRAM ) 349#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) 350 351/* 352 * BR2 and OR2 (NVRAM) 353 * 354 */ 355#define NVRAM_BASE1_PRELIM CONFIG_SYS_NVRAM_BASE /* NVRAM bank #0 */ 356#define NVRAM_MAX_SIZE 0x00020000 /* 128 KB MAX for CS2 */ 357 358#define CONFIG_SYS_OR2_PRELIM 0xFFF80160 359#define CONFIG_SYS_BR2_PRELIM ((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) 360 361/* 362 * Memory Periodic Timer Prescaler 363 */ 364 365/* periodic timer for refresh */ 366#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ 367 368/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ 369#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ 370#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ 371 372/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ 373#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ 374#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ 375 376/* 377 * MAMR settings for SDRAM 378 */ 379 380/* 8 column SDRAM */ 381#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ 382 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ 383 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) 384/* 9 column SDRAM */ 385#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ 386 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ 387 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) 388 389#endif /* __CONFIG_H */ 390