LXR uboot/include/configs/woodburn

   1/*
   2 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
   3 *
   4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5 *
   6 * Configuration for the woodburn board.
   7 *
   8 * This program is free software; you can redistribute it and/or
   9 * modify it under the terms of the GNU General Public License as
  10 * published by the Free Software Foundation; either version 2 of
  11 * the License, or (at your option) any later version.
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 * MA 02111-1307 USA
  22 */
  23
  24#ifndef __CONFIG_H
  25#define __CONFIG_H
  26
  27#include <asm/arch/imx-regs.h>
  28#include "woodburn_common.h"
  29
  30/* Set TEXT in RAM */
  31#define CONFIG_SYS_TEXT_BASE    0x82000000
  32
  33#define CONFIG_BOOT_INTERNAL
  34
  35/*
  36 * SPL
  37 */
  38#define CONFIG_SPL
  39#define CONFIG_SPL_FRAMEWORK
  40#define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm1136/u-boot-spl.lds"
  41#define CONFIG_SPL_LIBCOMMON_SUPPORT
  42#define CONFIG_SPL_LIBGENERIC_SUPPORT
  43#define CONFIG_SPL_LIBDISK_SUPPORT
  44#define CONFIG_SPL_SERIAL_SUPPORT
  45#define CONFIG_SPL_MMC_SUPPORT
  46#define CONFIG_SPL_BOARD_INIT
  47#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x100 /* address 0x60000 */
  48#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x400 /* 512 KB */
  49#define CONFIG_SPL_GPIO_SUPPORT
  50
  51#define CONFIG_SPL_TEXT_BASE            0x10002300
  52#define CONFIG_SPL_MAX_SIZE             (64 * 1024)     /* 8 KB for stack */
  53#define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
  54
  55#define CONFIG_SYS_SPL_MALLOC_START     0x8f000000
  56#define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
  57#define CONFIG_SPL_BSS_START_ADDR       0x8f080000 /* end of RAM */
  58#define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  59
  60#endif                          /* __CONFIG_H */
  61