1/* 2 * Configuation settings for the esd TASREG board. 3 * 4 * (C) Copyright 2004 5 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26/* 27 * board/config.h - configuration options, board specific 28 */ 29 30#ifndef _M5249EVB_H 31#define _M5249EVB_H 32 33/* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37#define CONFIG_MCF52x2 /* define processor family */ 38#define CONFIG_M5249 /* define processor type */ 39 40#define CONFIG_MCFTMR 41 42#define CONFIG_MCFUART 43#define CONFIG_SYS_UART_PORT (0) 44#define CONFIG_BAUDRATE 115200 45 46#undef CONFIG_WATCHDOG 47 48#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ 49 50/* 51 * BOOTP options 52 */ 53#undef CONFIG_BOOTP_BOOTFILESIZE 54#undef CONFIG_BOOTP_BOOTPATH 55#undef CONFIG_BOOTP_GATEWAY 56#undef CONFIG_BOOTP_HOSTNAME 57 58/* 59 * Command line configuration. 60 */ 61#include <config_cmd_default.h> 62#define CONFIG_CMD_CACHE 63#undef CONFIG_CMD_NET 64 65#define CONFIG_SYS_PROMPT "=> " 66#define CONFIG_SYS_LONGHELP /* undef to save memory */ 67 68#if defined(CONFIG_CMD_KGDB) 69#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 70#else 71#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 72#endif 73#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 74#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 75#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 76 77#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ 78#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup */ 79#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ 80#define CONFIG_LOOPW 1 /* enable loopw command */ 81#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ 82 83#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ 84 85#define CONFIG_SYS_MEMTEST_START 0x400 86#define CONFIG_SYS_MEMTEST_END 0x380000 87 88#define CONFIG_SYS_HZ 1000 89 90/* 91 * Clock configuration: enable only one of the following options 92 */ 93 94#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ 95#define CONFIG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */ 96#define CONFIG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */ 97 98/* 99 * Low Level Configuration Settings 100 * (address mappings, register initial values, etc.) 101 * You should know what you are doing if you make changes here. 102 */ 103 104#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ 105#define CONFIG_SYS_MBAR2 0x80000000 106 107/*----------------------------------------------------------------------- 108 * Definitions for initial stack pointer and data area (in DPRAM) 109 */ 110#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 111#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ 112#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 113#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 114 115#define CONFIG_ENV_IS_IN_FLASH 1 116#define CONFIG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/ 117#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ 118#define CONFIG_ENV_SECT_SIZE 0x2000 /* see README - env sector total size */ 119 120/*----------------------------------------------------------------------- 121 * Start addresses for the final memory configuration 122 * (Set up by the startup code) 123 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 124 */ 125#define CONFIG_SYS_SDRAM_BASE 0x00000000 126#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ 127#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) 128 129#if 0 /* test-only */ 130#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ 131#endif 132 133#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 134 135#define CONFIG_SYS_MONITOR_LEN 0x20000 136#define CONFIG_SYS_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ 137#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 138 139/* 140 * For booting Linux, the board info and command line data 141 * have to be in the first 8 MB of memory, since this is 142 * the maximum mapped by the Linux kernel during initialization ?? 143 */ 144#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 145 146/*----------------------------------------------------------------------- 147 * FLASH organization 148 */ 149#define CONFIG_SYS_FLASH_CFI 150#ifdef CONFIG_SYS_FLASH_CFI 151 152# define CONFIG_FLASH_CFI_DRIVER 1 153# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 154# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 155# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 156# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 157# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 158# define CONFIG_SYS_FLASH_CHECKSUM 159# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 160#endif 161 162/*----------------------------------------------------------------------- 163 * Cache Configuration 164 */ 165#define CONFIG_SYS_CACHELINE_SIZE 16 166 167#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 168 CONFIG_SYS_INIT_RAM_SIZE - 8) 169#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 170 CONFIG_SYS_INIT_RAM_SIZE - 4) 171#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) 172#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ 173 CF_ADDRMASK(2) | \ 174 CF_ACR_EN | CF_ACR_SM_ALL) 175#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ 176 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 177 CF_ACR_EN | CF_ACR_SM_ALL) 178#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ 179 CF_CACR_DBWE) 180 181/*----------------------------------------------------------------------- 182 * Memory bank definitions 183 */ 184 185/* CS0 - AMD Flash, address 0xffc00000 */ 186#define CONFIG_SYS_CS0_BASE 0xffe00000 187#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ 188/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ 189#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ 190 191/* CS1 - FPGA, address 0xe0000000 */ 192#define CONFIG_SYS_CS1_BASE 0xe0000000 193#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ 194#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ 195 196/*----------------------------------------------------------------------- 197 * Port configuration 198 */ 199#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ 200#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ 201#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ 202#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ 203#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ 204#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ 205#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ 206 207#endif /* M5249 */ 208