LXR uboot/include/configs/pogo

   1/*
   2 * Copyright (C) 2012
   3 * David Purdy <david.c.purdy@gmail.com>
   4 *
   5 * Based on Kirkwood support:
   6 * (C) Copyright 2009
   7 * Marvell Semiconductor <www.marvell.com>
   8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9 *
  10 * See file CREDITS for list of people who contributed to this
  11 * project.
  12 *
  13 * This program is free software; you can redistribute it and/or
  14 * modify it under the terms of the GNU General Public License as
  15 * published by the Free Software Foundation; either version 2 of
  16 * the License, or (at your option) any later version.
  17 *
  18 * This program is distributed in the hope that it will be useful,
  19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  21 * GNU General Public License for more details.
  22 *
  23 * You should have received a copy of the GNU General Public License
  24 * along with this program; If not, see <http://www.gnu.org/licenses/>.
  25 */
  26
  27#ifndef _CONFIG_POGO_E02_H
  28#define _CONFIG_POGO_E02_H
  29
  30/*
  31 * Machine type definition and ID
  32 */
  33#define MACH_TYPE_POGO_E02              3542
  34#define CONFIG_MACH_TYPE                MACH_TYPE_POGO_E02
  35#define CONFIG_IDENT_STRING             "\nPogo E02"
  36
  37/*
  38 * High Level Configuration Options (easy to change)
  39 */
  40#define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  41#define CONFIG_KIRKWOOD                 /* SOC Family Name */
  42#define CONFIG_KW88F6281                /* SOC Name */
  43#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  44
  45/*
  46 * Commands configuration
  47 */
  48#define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  49#define CONFIG_SYS_MVFS
  50#include <config_cmd_default.h>
  51#define CONFIG_CMD_DHCP
  52#define CONFIG_CMD_ENV
  53#define CONFIG_CMD_MII
  54#define CONFIG_CMD_NAND
  55#define CONFIG_CMD_PING
  56#define CONFIG_CMD_USB
  57
  58/*
  59 * mv-common.h should be defined after CMD configs since it used them
  60 * to enable certain macros
  61 */
  62#include "mv-common.h"
  63
  64/* Remove or override few declarations from mv-common.h */
  65#undef CONFIG_SYS_PROMPT        /* previously defined in mv-common.h */
  66#define CONFIG_SYS_PROMPT       "PogoE02> "
  67
  68/*
  69 *  Environment variables configurations
  70 */
  71#ifdef CONFIG_CMD_NAND
  72#define CONFIG_ENV_IS_IN_NAND
  73#define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  74#else
  75#define CONFIG_ENV_IS_NOWHERE
  76#endif
  77
  78#define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  79#define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  80
  81/*
  82 * Default environment variables
  83 */
  84#define CONFIG_BOOTCOMMAND \
  85        "setenv bootargs $(bootargs_console); " \
  86        "run bootcmd_usb; " \
  87        "bootm 0x00800000 0x01100000"
  88
  89#define CONFIG_EXTRA_ENV_SETTINGS \
  90        "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
  91        "32M(rootfs),-(data)\0"\
  92        "mtdids=nand0=orion_nand\0"\
  93        "bootargs_console=console=ttyS0,115200\0" \
  94        "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
  95        "ext2load usb 0:1 0x01100000 /uInitrd\0"
  96
  97/*
  98 * Ethernet Driver configuration
  99 */
 100#ifdef CONFIG_CMD_NET
 101#define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 102#define CONFIG_PHY_BASE_ADR     0
 103#endif /* CONFIG_CMD_NET */
 104
 105/*
 106 * File system
 107 */
 108#define CONFIG_CMD_EXT2
 109#define CONFIG_CMD_FAT
 110#define CONFIG_CMD_JFFS2
 111#define CONFIG_CMD_UBI
 112#define CONFIG_CMD_UBIFS
 113#define CONFIG_RBTREE
 114#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 115#define CONFIG_MTD_PARTITIONS
 116#define CONFIG_CMD_MTDPARTS
 117#define CONFIG_LZO
 118
 119#endif /* _CONFIG_POGO_E02_H */
 120