uboot/include/configs/at91sam9261ek.h
<<
>>
Prefs
   1/*
   2 * (C) Copyright 2007-2008
   3 * Stelian Pop <stelian@popies.net>
   4 * Lead Tech Design <www.leadtechdesign.com>
   5 *
   6 * Configuation settings for the AT91SAM9261EK board.
   7 *
   8 * SPDX-License-Identifier:     GPL-2.0+
   9 */
  10
  11#ifndef __CONFIG_H
  12#define __CONFIG_H
  13
  14/* ARM asynchronous clock */
  15#define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  16#define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* 18.432 MHz crystal */
  17#define CONFIG_SYS_HZ                   1000
  18
  19#ifdef CONFIG_AT91SAM9G10
  20#define CONFIG_AT91SAM9G10EK            /* It's an Atmel AT91SAM9G10 EK*/
  21#else
  22#define CONFIG_AT91SAM9261EK            /* It's an Atmel AT91SAM9261 EK*/
  23#endif
  24
  25#include <asm/hardware.h>
  26
  27#define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  28#define CONFIG_SETUP_MEMORY_TAGS
  29#define CONFIG_INITRD_TAG
  30
  31#define CONFIG_SKIP_LOWLEVEL_INIT
  32
  33#define CONFIG_DISPLAY_CPUINFO
  34
  35#define CONFIG_OF_LIBFDT
  36
  37#define CONFIG_ATMEL_LEGACY
  38#define CONFIG_SYS_TEXT_BASE            0x21f00000
  39
  40/*
  41 * Hardware drivers
  42 */
  43
  44/* gpio */
  45#define CONFIG_AT91_GPIO
  46#define CONFIG_AT91_GPIO_PULLUP         1
  47
  48/* serial console */
  49#define CONFIG_ATMEL_USART
  50#define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  51#define CONFIG_USART_ID                 ATMEL_ID_SYS
  52#define CONFIG_BAUDRATE                 115200
  53
  54/* LCD */
  55#define CONFIG_LCD
  56#define LCD_BPP                         LCD_COLOR8
  57#define CONFIG_LCD_LOGO
  58#undef LCD_TEST_PATTERN
  59#define CONFIG_LCD_INFO
  60#define CONFIG_LCD_INFO_BELOW_LOGO
  61#define CONFIG_SYS_WHITE_ON_BLACK
  62#define CONFIG_ATMEL_LCD
  63#ifdef CONFIG_AT91SAM9261EK
  64#define CONFIG_ATMEL_LCD_BGR555
  65#endif
  66
  67#define CONFIG_SYS_CONSOLE_IS_IN_ENV
  68
  69/* LED */
  70#define CONFIG_AT91_LED
  71#define CONFIG_RED_LED          AT91_PIN_PA23   /* this is the power led */
  72#define CONFIG_GREEN_LED        AT91_PIN_PA13   /* this is the user1 led */
  73#define CONFIG_YELLOW_LED       AT91_PIN_PA14   /* this is the user2 led */
  74
  75#define CONFIG_BOOTDELAY        3
  76
  77/*
  78 * BOOTP options
  79 */
  80#define CONFIG_BOOTP_BOOTFILESIZE
  81#define CONFIG_BOOTP_BOOTPATH
  82#define CONFIG_BOOTP_GATEWAY
  83#define CONFIG_BOOTP_HOSTNAME
  84
  85/*
  86 * Command line configuration.
  87 */
  88#include <config_cmd_default.h>
  89#undef CONFIG_CMD_BDI
  90#undef CONFIG_CMD_FPGA
  91#undef CONFIG_CMD_IMI
  92#undef CONFIG_CMD_IMLS
  93#undef CONFIG_CMD_LOADS
  94#undef CONFIG_CMD_SOURCE
  95
  96#define CONFIG_CMD_PING
  97#define CONFIG_CMD_DHCP
  98#define CONFIG_CMD_NAND
  99#define CONFIG_CMD_USB
 100
 101/* SDRAM */
 102#define CONFIG_NR_DRAM_BANKS            1
 103#define CONFIG_SYS_SDRAM_BASE           0x20000000
 104#define CONFIG_SYS_SDRAM_SIZE           0x04000000
 105#define CONFIG_SYS_INIT_SP_ADDR \
 106        (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 107
 108/* DataFlash */
 109#define CONFIG_ATMEL_DATAFLASH_SPI
 110#define CONFIG_HAS_DATAFLASH
 111#define CONFIG_SYS_SPI_WRITE_TOUT               (5*CONFIG_SYS_HZ)
 112#define CONFIG_SYS_MAX_DATAFLASH_BANKS          2
 113#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 114#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
 115#define AT91_SPI_CLK                            15000000
 116#define DATAFLASH_TCSS                          (0x1a << 16)
 117#define DATAFLASH_TCHS                          (0x1 << 24)
 118
 119/* NAND flash */
 120#ifdef CONFIG_CMD_NAND
 121#define CONFIG_NAND_ATMEL
 122#define CONFIG_SYS_MAX_NAND_DEVICE              1
 123#define CONFIG_SYS_NAND_BASE                    0x40000000
 124#define CONFIG_SYS_NAND_DBW_8
 125/* our ALE is AD22 */
 126#define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 127/* our CLE is AD21 */
 128#define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 129#define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 130#define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC15
 131
 132#endif
 133
 134/* NOR flash - no real flash on this board */
 135#define CONFIG_SYS_NO_FLASH
 136
 137/* Ethernet */
 138#define CONFIG_DRIVER_DM9000
 139#define CONFIG_DM9000_BASE              0x30000000
 140#define DM9000_IO                       CONFIG_DM9000_BASE
 141#define DM9000_DATA                     (CONFIG_DM9000_BASE + 4)
 142#define CONFIG_DM9000_USE_16BIT
 143#define CONFIG_DM9000_NO_SROM
 144#define CONFIG_NET_RETRY_COUNT          20
 145#define CONFIG_RESET_PHY_R
 146
 147/* USB */
 148#define CONFIG_USB_ATMEL
 149#define CONFIG_USB_OHCI_NEW
 150#define CONFIG_DOS_PARTITION
 151#define CONFIG_SYS_USB_OHCI_CPU_INIT
 152#define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000      /* AT91SAM9261_UHP_BASE */
 153#ifdef CONFIG_AT91SAM9G10EK
 154#define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9g10"
 155#else
 156#define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 157#endif
 158#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 159#define CONFIG_USB_STORAGE
 160#define CONFIG_CMD_FAT
 161
 162#define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 163
 164#define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
 165#define CONFIG_SYS_MEMTEST_END                  0x23e00000
 166
 167#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 168
 169/* bootstrap + u-boot + env + linux in dataflash on CS0 */
 170#define CONFIG_ENV_IS_IN_DATAFLASH
 171#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 172#define CONFIG_ENV_OFFSET       0x4200
 173#define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 174#define CONFIG_ENV_SIZE         0x4200
 175#define CONFIG_BOOTCOMMAND      "cp.b 0xC0084000 0x22000000 0x210000; bootm"
 176#define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 177                                "root=/dev/mtdblock0 "                  \
 178                                "mtdparts=atmel_nand:-(root) "          \
 179                                "rw rootfstype=jffs2"
 180
 181#elif CONFIG_SYS_USE_DATAFLASH_CS3
 182
 183/* bootstrap + u-boot + env + linux in dataflash on CS3 */
 184#define CONFIG_ENV_IS_IN_DATAFLASH
 185#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 186#define CONFIG_ENV_OFFSET       0x4200
 187#define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
 188#define CONFIG_ENV_SIZE         0x4200
 189#define CONFIG_BOOTCOMMAND      "cp.b 0xD0084000 0x22000000 0x210000; bootm"
 190#define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 191                                "root=/dev/mtdblock0 "                  \
 192                                "mtdparts=atmel_nand:-(root) "          \
 193                                "rw rootfstype=jffs2"
 194
 195#else /* CONFIG_SYS_USE_NANDFLASH */
 196
 197/* bootstrap + u-boot + env + linux in nandflash */
 198#define CONFIG_ENV_IS_IN_NAND
 199#define CONFIG_ENV_OFFSET               0xc0000
 200#define CONFIG_ENV_OFFSET_REDUND        0x100000
 201#define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 202#define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x300000; bootm"
 203#define CONFIG_BOOTARGS                                                 \
 204        "console=ttyS0,115200 earlyprintk "                             \
 205        "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 206        "256k(env),256k(env_redundant),256k(spare),"                    \
 207        "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 208        "root=/dev/mtdblock7 rw rootfstype=jffs2"
 209#endif
 210
 211#define CONFIG_SYS_PROMPT               "U-Boot> "
 212#define CONFIG_SYS_CBSIZE               256
 213#define CONFIG_SYS_MAXARGS              16
 214#define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 215#define CONFIG_SYS_LONGHELP
 216#define CONFIG_CMDLINE_EDITING
 217#define CONFIG_AUTO_COMPLETE
 218
 219/*
 220 * Size of malloc() pool
 221 */
 222#define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 223
 224#endif
 225