LXR uboot/include/configs/omap3_evm_quick

   1/*
   2 * Configuration settings for quick boot from NAND on OMAP3 EVM.
   3 *
   4 * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
   5 *
   6 * Author :
   7 *     Sanjeev Premi <premi@ti.com>
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12#ifndef __OMAP3_EVM_QUICK_NAND_H
  13#define __OMAP3_EVM_QUICK_NAND_H
  14
  15#include <asm/arch/cpu.h>
  16#include <asm/arch/omap3.h>
  17
  18/* ----------------------------------------------------------------------------
  19 * Supported U-boot commands
  20 * ----------------------------------------------------------------------------
  21 */
  22#define CONFIG_CMD_NAND
  23
  24/*
  25 * Board revision is detected by probing the Ethernet chip.
  26 *
  27 * When revision is statically configured via CONFIG_STATIC_BOARD_REV,
  28 * this option can be removed. Generated binary is leaner by ~16Kbytes.
  29 */
  30#define CONFIG_CMD_NET
  31
  32/* ----------------------------------------------------------------------------
  33 * Supported U-boot features
  34 * ----------------------------------------------------------------------------
  35 */
  36#define CONFIG_SILENT_CONSOLE
  37#define CONFIG_ENV_IS_NOWHERE
  38
  39/* -----------------------------------------------------------------------------
  40 * Include common board configuration
  41 * -----------------------------------------------------------------------------
  42 */
  43#include "omap3_evm_common.h"
  44
  45/* -----------------------------------------------------------------------------
  46 * Default environment
  47 * -----------------------------------------------------------------------------
  48 */
  49#define CONFIG_BOOTDELAY        0
  50
  51#define CONFIG_EXTRA_ENV_SETTINGS       \
  52        "verify=no\0"                   \
  53        "silent=1"
  54
  55#define CONFIG_BOOTCOMMAND                              \
  56        "nandecc hw; "  \
  57        "nand read.i 0x80000000 280000 300000; "        \
  58        "bootm 0x80000000;"
  59
  60/*
  61 * Update the bootargs as necessary e.g. size of memory, partition and fstype
  62 */
  63#define CONFIG_BOOTARGS                         \
  64        "quiet "                        \
  65        "console=ttyO0,115200n8 "       \
  66        "mem=128M "                     \
  67        "noinitrd "                     \
  68        "root=/dev/mtdblock4 rw "       \
  69        "rootfstype=jffs2 "
  70
  71/*
  72 * SPL
  73 */
  74#define CONFIG_SPL_NAND_SIMPLE
  75#define CONFIG_SPL_NAND_SUPPORT
  76#define CONFIG_SPL_NAND_BASE
  77#define CONFIG_SPL_NAND_DRIVERS
  78#define CONFIG_SPL_NAND_ECC
  79#define CONFIG_SYS_NAND_5_ADDR_CYCLE
  80#define CONFIG_SYS_NAND_PAGE_COUNT      64
  81#define CONFIG_SYS_NAND_PAGE_SIZE       2048
  82#define CONFIG_SYS_NAND_OOBSIZE         64
  83#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
  84#define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
  85#define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
  86                                                10, 11, 12, 13}
  87#define CONFIG_SYS_NAND_ECCSIZE         512
  88#define CONFIG_SYS_NAND_ECCBYTES        3
  89#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
  90#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
  91
  92#endif /* __OMAP3_EVM_QUICK_NAND_H */
  93