LXR uboot/include/configs/pxm2.h

   1/*
   2 * siemens pxm2
   3 * (C) Copyright 2013 Siemens Schweiz AG
   4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5 *
   6 * Based on:
   7 * U-Boot file:/include/configs/am335x_evm.h
   8 *
   9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10 *
  11 * SPDX-License-Identifier:     GPL-2.0+
  12 */
  13
  14#ifndef __CONFIG_PXM2_H
  15#define __CONFIG_PXM2_H
  16
  17#define CONFIG_SIEMENS_PXM2
  18#define MACH_TYPE_PXM2                  4309
  19#define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
  20
  21#include "siemens-am33x-common.h"
  22
  23#define CONFIG_SYS_MPUCLK       720
  24#define DXR2_IOCTRL_VAL         0x18b
  25#define DDR_PLL_FREQ            266
  26
  27#define BOARD_DFU_BUTTON_GPIO   59
  28#define BOARD_DFU_BUTTON_LED    117
  29#define BOARD_LCD_POWER         111
  30#define BOARD_BACK_LIGHT        112
  31#define BOARD_TOUCH_POWER       57
  32
  33 /* Physical Memory Map */
  34#define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
  35
  36/* I2C Configuration */
  37#define CONFIG_SYS_I2C_SPEED            400000
  38#define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
  39
  40
  41#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
  42
  43#undef CONFIG_SPL_NET_SUPPORT
  44#undef CONFIG_SPL_NET_VCI_STRING
  45#undef CONFIG_SPL_ETH_SUPPORT
  46
  47#define CONFIG_PHY_ADDR                 0
  48#define CONFIG_PHY_ATHEROS
  49
  50#define CONFIG_FACTORYSET
  51
  52/* UBI Support */
  53#ifndef CONFIG_SPL_BUILD
  54#define CONFIG_CMD_MTDPARTS
  55#define CONFIG_MTD_PARTITIONS
  56#define CONFIG_MTD_DEVICE
  57#define CONFIG_RBTREE
  58#define CONFIG_LZO
  59#define CONFIG_CMD_UBI
  60#define CONFIG_CMD_UBIFS
  61#endif
  62
  63/* Watchdog */
  64#define CONFIG_OMAP_WATCHDOG
  65
  66#ifndef CONFIG_SPL_BUILD
  67
  68/* Default env settings */
  69#define CONFIG_EXTRA_ENV_SETTINGS \
  70        "hostname=pxm2\0" \
  71        "nand_img_size=0x500000\0" \
  72        "optargs=\0" \
  73        CONFIG_COMMON_ENV_SETTINGS \
  74        "mmc_dev=0\0" \
  75        "mmc_root=/dev/mmcblk0p2 rw\0" \
  76        "mmc_root_fs_type=ext4 rootwait\0" \
  77        "mmc_load_uimage=" \
  78                "mmc rescan; " \
  79                "setenv bootfile uImage;" \
  80                "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
  81        "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
  82        "importbootenv=echo Importing environment from mmc ...; " \
  83                "env import -t $loadaddr $filesize\0" \
  84        "mmc_args=run bootargs_defaults;" \
  85                "mtdparts default;" \
  86                "setenv bootargs ${bootargs} " \
  87                "root=${mmc_root} ${mtdparts}" \
  88                "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
  89                "eth=${ethaddr} " \
  90                "\0" \
  91        "mmc_boot=run mmc_args; " \
  92                "run mmc_load_uimage; " \
  93                "bootm ${kloadaddr}\0" \
  94        ""
  95
  96#ifndef CONFIG_RESTORE_FLASH
  97/* set to negative value for no autoboot */
  98#define CONFIG_BOOTDELAY                3
  99
 100#define CONFIG_BOOTCOMMAND \
 101        "if dfubutton; then " \
 102                "run dfu_start; " \
 103                "reset; " \
 104        "fi; " \
 105        "if mmc rescan; then " \
 106                "echo SD/MMC found on device ${mmc_dev};" \
 107                "if run loadbootenv; then " \
 108                        "echo Loaded environment from ${bootenv};" \
 109                        "run importbootenv;" \
 110                "fi;" \
 111                "if test -n $uenvcmd; then " \
 112                        "echo Running uenvcmd ...;" \
 113                        "run uenvcmd;" \
 114                "fi;" \
 115                "if run mmc_load_uimage; then " \
 116                        "run mmc_args;" \
 117                        "bootm ${kloadaddr};" \
 118                "fi;" \
 119        "fi;" \
 120        "run nand_boot;" \
 121        "if ping ${serverip}; then " \
 122                "run net_nfs; " \
 123        "fi; "
 124
 125#else
 126#define CONFIG_BOOTDELAY                0
 127
 128#define CONFIG_BOOTCOMMAND                      \
 129        "setenv autoload no; "                  \
 130        "dhcp; "                                \
 131        "if tftp 80000000 debrick.scr; then "   \
 132                "source 80000000; "             \
 133        "fi"
 134#endif
 135#endif  /* CONFIG_SPL_BUILD */
 136
 137#define CONFIG_VIDEO
 138#if defined(CONFIG_VIDEO)
 139#define CONFIG_VIDEO_DA8XX
 140#define CONFIG_CFB_CONSOLE
 141#define CONFIG_VGA_AS_SINGLE_DEVICE
 142#define CONFIG_SPLASH_SCREEN
 143#define CONFIG_SPLASH_SCREEN_ALIGN
 144#define CONFIG_VIDEO_LOGO
 145#define CONFIG_VIDEO_BMP_RLE8
 146#define CONFIG_VIDEO_BMP_LOGO
 147#define CONFIG_CMD_BMP
 148#define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
 149#define PWM_TICKS       0x1388
 150#define PWM_DUTY        0x200
 151#endif
 152
 153#endif  /* ! __CONFIG_PXM2_H */
 154