uboot/common/hush.c
<<
>>
Prefs
   1/*
   2 * sh.c -- a prototype Bourne shell grammar parser
   3 *      Intended to follow the original Thompson and Ritchie
   4 *      "small and simple is beautiful" philosophy, which
   5 *      incidentally is a good match to today's BusyBox.
   6 *
   7 * Copyright (C) 2000,2001  Larry Doolittle  <larry@doolittle.boa.org>
   8 *
   9 * Credits:
  10 *      The parser routines proper are all original material, first
  11 *      written Dec 2000 and Jan 2001 by Larry Doolittle.
  12 *      The execution engine, the builtins, and much of the underlying
  13 *      support has been adapted from busybox-0.49pre's lash,
  14 *      which is Copyright (C) 2000 by Lineo, Inc., and
  15 *      written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
  16 *      That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
  17 *      Erik W. Troan, which they placed in the public domain.  I don't know
  18 *      how much of the Johnson/Troan code has survived the repeated rewrites.
  19 * Other credits:
  20 *      b_addchr() derived from similar w_addchar function in glibc-2.2
  21 *      setup_redirect(), redirect_opt_num(), and big chunks of main()
  22 *        and many builtins derived from contributions by Erik Andersen
  23 *      miscellaneous bugfixes from Matt Kraai
  24 *
  25 * There are two big (and related) architecture differences between
  26 * this parser and the lash parser.  One is that this version is
  27 * actually designed from the ground up to understand nearly all
  28 * of the Bourne grammar.  The second, consequential change is that
  29 * the parser and input reader have been turned inside out.  Now,
  30 * the parser is in control, and asks for input as needed.  The old
  31 * way had the input reader in control, and it asked for parsing to
  32 * take place as needed.  The new way makes it much easier to properly
  33 * handle the recursion implicit in the various substitutions, especially
  34 * across continuation lines.
  35 *
  36 * Bash grammar not implemented: (how many of these were in original sh?)
  37 *      $@ (those sure look like weird quoting rules)
  38 *      $_
  39 *      ! negation operator for pipes
  40 *      &> and >& redirection of stdout+stderr
  41 *      Brace Expansion
  42 *      Tilde Expansion
  43 *      fancy forms of Parameter Expansion
  44 *      aliases
  45 *      Arithmetic Expansion
  46 *      <(list) and >(list) Process Substitution
  47 *      reserved words: case, esac, select, function
  48 *      Here Documents ( << word )
  49 *      Functions
  50 * Major bugs:
  51 *      job handling woefully incomplete and buggy
  52 *      reserved word execution woefully incomplete and buggy
  53 * to-do:
  54 *      port selected bugfixes from post-0.49 busybox lash - done?
  55 *      finish implementing reserved words: for, while, until, do, done
  56 *      change { and } from special chars to reserved words
  57 *      builtins: break, continue, eval, return, set, trap, ulimit
  58 *      test magic exec
  59 *      handle children going into background
  60 *      clean up recognition of null pipes
  61 *      check setting of global_argc and global_argv
  62 *      control-C handling, probably with longjmp
  63 *      follow IFS rules more precisely, including update semantics
  64 *      figure out what to do with backslash-newline
  65 *      explain why we use signal instead of sigaction
  66 *      propagate syntax errors, die on resource errors?
  67 *      continuation lines, both explicit and implicit - done?
  68 *      memory leak finding and plugging - done?
  69 *      more testing, especially quoting rules and redirection
  70 *      document how quoting rules not precisely followed for variable assignments
  71 *      maybe change map[] to use 2-bit entries
  72 *      (eventually) remove all the printf's
  73 *
  74 * SPDX-License-Identifier:     GPL-2.0+
  75 */
  76
  77#define __U_BOOT__
  78#ifdef __U_BOOT__
  79#include <malloc.h>         /* malloc, free, realloc*/
  80#include <linux/ctype.h>    /* isalpha, isdigit */
  81#include <common.h>        /* readline */
  82#include <hush.h>
  83#include <command.h>        /* find_cmd */
  84#ifndef CONFIG_SYS_PROMPT_HUSH_PS2
  85#define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  86#endif
  87#endif
  88#ifndef __U_BOOT__
  89#include <ctype.h>     /* isalpha, isdigit */
  90#include <unistd.h>    /* getpid */
  91#include <stdlib.h>    /* getenv, atoi */
  92#include <string.h>    /* strchr */
  93#include <stdio.h>     /* popen etc. */
  94#include <glob.h>      /* glob, of course */
  95#include <stdarg.h>    /* va_list */
  96#include <errno.h>
  97#include <fcntl.h>
  98#include <getopt.h>    /* should be pretty obvious */
  99
 100#include <sys/stat.h>  /* ulimit */
 101#include <sys/types.h>
 102#include <sys/wait.h>
 103#include <signal.h>
 104
 105/* #include <dmalloc.h> */
 106
 107#if 1
 108#include "busybox.h"
 109#include "cmdedit.h"
 110#else
 111#define applet_name "hush"
 112#include "standalone.h"
 113#define hush_main main
 114#undef CONFIG_FEATURE_SH_FANCY_PROMPT
 115#define BB_BANNER
 116#endif
 117#endif
 118#define SPECIAL_VAR_SYMBOL 03
 119#define SUBSTED_VAR_SYMBOL 04
 120#ifndef __U_BOOT__
 121#define FLAG_EXIT_FROM_LOOP 1
 122#define FLAG_PARSE_SEMICOLON (1 << 1)           /* symbol ';' is special for parser */
 123#define FLAG_REPARSING       (1 << 2)           /* >= 2nd pass */
 124
 125#endif
 126
 127#ifdef __U_BOOT__
 128DECLARE_GLOBAL_DATA_PTR;
 129
 130#define EXIT_SUCCESS 0
 131#define EOF -1
 132#define syntax() syntax_err()
 133#define xstrdup strdup
 134#define error_msg printf
 135#else
 136typedef enum {
 137        REDIRECT_INPUT     = 1,
 138        REDIRECT_OVERWRITE = 2,
 139        REDIRECT_APPEND    = 3,
 140        REDIRECT_HEREIS    = 4,
 141        REDIRECT_IO        = 5
 142} redir_type;
 143
 144/* The descrip member of this structure is only used to make debugging
 145 * output pretty */
 146struct {int mode; int default_fd; char *descrip;} redir_table[] = {
 147        { 0,                         0, "()" },
 148        { O_RDONLY,                  0, "<"  },
 149        { O_CREAT|O_TRUNC|O_WRONLY,  1, ">"  },
 150        { O_CREAT|O_APPEND|O_WRONLY, 1, ">>" },
 151        { O_RDONLY,                 -1, "<<" },
 152        { O_RDWR,                    1, "<>" }
 153};
 154#endif
 155
 156typedef enum {
 157        PIPE_SEQ = 1,
 158        PIPE_AND = 2,
 159        PIPE_OR  = 3,
 160        PIPE_BG  = 4,
 161} pipe_style;
 162
 163/* might eventually control execution */
 164typedef enum {
 165        RES_NONE  = 0,
 166        RES_IF    = 1,
 167        RES_THEN  = 2,
 168        RES_ELIF  = 3,
 169        RES_ELSE  = 4,
 170        RES_FI    = 5,
 171        RES_FOR   = 6,
 172        RES_WHILE = 7,
 173        RES_UNTIL = 8,
 174        RES_DO    = 9,
 175        RES_DONE  = 10,
 176        RES_XXXX  = 11,
 177        RES_IN    = 12,
 178        RES_SNTX  = 13
 179} reserved_style;
 180#define FLAG_END   (1<<RES_NONE)
 181#define FLAG_IF    (1<<RES_IF)
 182#define FLAG_THEN  (1<<RES_THEN)
 183#define FLAG_ELIF  (1<<RES_ELIF)
 184#define FLAG_ELSE  (1<<RES_ELSE)
 185#define FLAG_FI    (1<<RES_FI)
 186#define FLAG_FOR   (1<<RES_FOR)
 187#define FLAG_WHILE (1<<RES_WHILE)
 188#define FLAG_UNTIL (1<<RES_UNTIL)
 189#define FLAG_DO    (1<<RES_DO)
 190#define FLAG_DONE  (1<<RES_DONE)
 191#define FLAG_IN    (1<<RES_IN)
 192#define FLAG_START (1<<RES_XXXX)
 193
 194/* This holds pointers to the various results of parsing */
 195struct p_context {
 196        struct child_prog *child;
 197        struct pipe *list_head;
 198        struct pipe *pipe;
 199#ifndef __U_BOOT__
 200        struct redir_struct *pending_redirect;
 201#endif
 202        reserved_style w;
 203        int old_flag;                           /* for figuring out valid reserved words */
 204        struct p_context *stack;
 205        int type;                       /* define type of parser : ";$" common or special symbol */
 206        /* How about quoting status? */
 207};
 208
 209#ifndef __U_BOOT__
 210struct redir_struct {
 211        redir_type type;                        /* type of redirection */
 212        int fd;                                         /* file descriptor being redirected */
 213        int dup;                                        /* -1, or file descriptor being duplicated */
 214        struct redir_struct *next;      /* pointer to the next redirect in the list */
 215        glob_t word;                            /* *word.gl_pathv is the filename */
 216};
 217#endif
 218
 219struct child_prog {
 220#ifndef __U_BOOT__
 221        pid_t pid;                                      /* 0 if exited */
 222#endif
 223        char **argv;                            /* program name and arguments */
 224#ifdef __U_BOOT__
 225        int    argc;                            /* number of program arguments */
 226#endif
 227        struct pipe *group;                     /* if non-NULL, first in group or subshell */
 228#ifndef __U_BOOT__
 229        int subshell;                           /* flag, non-zero if group must be forked */
 230        struct redir_struct *redirects; /* I/O redirections */
 231        glob_t glob_result;                     /* result of parameter globbing */
 232        int is_stopped;                         /* is the program currently running? */
 233        struct pipe *family;            /* pointer back to the child's parent pipe */
 234#endif
 235        int sp;                         /* number of SPECIAL_VAR_SYMBOL */
 236        int type;
 237};
 238
 239struct pipe {
 240#ifndef __U_BOOT__
 241        int jobid;                                      /* job number */
 242#endif
 243        int num_progs;                          /* total number of programs in job */
 244#ifndef __U_BOOT__
 245        int running_progs;                      /* number of programs running */
 246        char *text;                                     /* name of job */
 247        char *cmdbuf;                           /* buffer various argv's point into */
 248        pid_t pgrp;                                     /* process group ID for the job */
 249#endif
 250        struct child_prog *progs;       /* array of commands in pipe */
 251        struct pipe *next;                      /* to track background commands */
 252#ifndef __U_BOOT__
 253        int stopped_progs;                      /* number of programs alive, but stopped */
 254        int job_context;                        /* bitmask defining current context */
 255#endif
 256        pipe_style followup;            /* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
 257        reserved_style r_mode;          /* supports if, for, while, until */
 258};
 259
 260#ifndef __U_BOOT__
 261struct close_me {
 262        int fd;
 263        struct close_me *next;
 264};
 265#endif
 266
 267struct variables {
 268        char *name;
 269        char *value;
 270        int flg_export;
 271        int flg_read_only;
 272        struct variables *next;
 273};
 274
 275/* globals, connect us to the outside world
 276 * the first three support $?, $#, and $1 */
 277#ifndef __U_BOOT__
 278char **global_argv;
 279unsigned int global_argc;
 280#endif
 281static unsigned int last_return_code;
 282#ifndef __U_BOOT__
 283extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
 284#endif
 285
 286/* "globals" within this file */
 287static uchar *ifs;
 288static char map[256];
 289#ifndef __U_BOOT__
 290static int fake_mode;
 291static int interactive;
 292static struct close_me *close_me_head;
 293static const char *cwd;
 294static struct pipe *job_list;
 295static unsigned int last_bg_pid;
 296static unsigned int last_jobid;
 297static unsigned int shell_terminal;
 298static char *PS1;
 299static char *PS2;
 300struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 };
 301struct variables *top_vars = &shell_ver;
 302#else
 303static int flag_repeat = 0;
 304static int do_repeat = 0;
 305static struct variables *top_vars = NULL ;
 306#endif /*__U_BOOT__ */
 307
 308#define B_CHUNK (100)
 309#define B_NOSPAC 1
 310
 311typedef struct {
 312        char *data;
 313        int length;
 314        int maxlen;
 315        int quote;
 316        int nonnull;
 317} o_string;
 318#define NULL_O_STRING {NULL,0,0,0,0}
 319/* used for initialization:
 320        o_string foo = NULL_O_STRING; */
 321
 322/* I can almost use ordinary FILE *.  Is open_memstream() universally
 323 * available?  Where is it documented? */
 324struct in_str {
 325        const char *p;
 326#ifndef __U_BOOT__
 327        char peek_buf[2];
 328#endif
 329        int __promptme;
 330        int promptmode;
 331#ifndef __U_BOOT__
 332        FILE *file;
 333#endif
 334        int (*get) (struct in_str *);
 335        int (*peek) (struct in_str *);
 336};
 337#define b_getch(input) ((input)->get(input))
 338#define b_peek(input) ((input)->peek(input))
 339
 340#ifndef __U_BOOT__
 341#define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
 342
 343struct built_in_command {
 344        char *cmd;                                      /* name */
 345        char *descr;                            /* description */
 346        int (*function) (struct child_prog *);  /* function ptr */
 347};
 348#endif
 349
 350/* define DEBUG_SHELL for debugging output (obviously ;-)) */
 351#if 0
 352#define DEBUG_SHELL
 353#endif
 354
 355/* This should be in utility.c */
 356#ifdef DEBUG_SHELL
 357#ifndef __U_BOOT__
 358static void debug_printf(const char *format, ...)
 359{
 360        va_list args;
 361        va_start(args, format);
 362        vfprintf(stderr, format, args);
 363        va_end(args);
 364}
 365#else
 366#define debug_printf(fmt,args...)       printf (fmt ,##args)
 367#endif
 368#else
 369static inline void debug_printf(const char *format, ...) { }
 370#endif
 371#define final_printf debug_printf
 372
 373#ifdef __U_BOOT__
 374static void syntax_err(void) {
 375         printf("syntax error\n");
 376}
 377#else
 378static void __syntax(char *file, int line) {
 379        error_msg("syntax error %s:%d", file, line);
 380}
 381#define syntax() __syntax(__FILE__, __LINE__)
 382#endif
 383
 384#ifdef __U_BOOT__
 385static void *xmalloc(size_t size);
 386static void *xrealloc(void *ptr, size_t size);
 387#else
 388/* Index of subroutines: */
 389/*   function prototypes for builtins */
 390static int builtin_cd(struct child_prog *child);
 391static int builtin_env(struct child_prog *child);
 392static int builtin_eval(struct child_prog *child);
 393static int builtin_exec(struct child_prog *child);
 394static int builtin_exit(struct child_prog *child);
 395static int builtin_export(struct child_prog *child);
 396static int builtin_fg_bg(struct child_prog *child);
 397static int builtin_help(struct child_prog *child);
 398static int builtin_jobs(struct child_prog *child);
 399static int builtin_pwd(struct child_prog *child);
 400static int builtin_read(struct child_prog *child);
 401static int builtin_set(struct child_prog *child);
 402static int builtin_shift(struct child_prog *child);
 403static int builtin_source(struct child_prog *child);
 404static int builtin_umask(struct child_prog *child);
 405static int builtin_unset(struct child_prog *child);
 406static int builtin_not_written(struct child_prog *child);
 407#endif
 408/*   o_string manipulation: */
 409static int b_check_space(o_string *o, int len);
 410static int b_addchr(o_string *o, int ch);
 411static void b_reset(o_string *o);
 412static int b_addqchr(o_string *o, int ch, int quote);
 413#ifndef __U_BOOT__
 414static int b_adduint(o_string *o, unsigned int i);
 415#endif
 416/*  in_str manipulations: */
 417static int static_get(struct in_str *i);
 418static int static_peek(struct in_str *i);
 419static int file_get(struct in_str *i);
 420static int file_peek(struct in_str *i);
 421#ifndef __U_BOOT__
 422static void setup_file_in_str(struct in_str *i, FILE *f);
 423#else
 424static void setup_file_in_str(struct in_str *i);
 425#endif
 426static void setup_string_in_str(struct in_str *i, const char *s);
 427#ifndef __U_BOOT__
 428/*  close_me manipulations: */
 429static void mark_open(int fd);
 430static void mark_closed(int fd);
 431static void close_all(void);
 432#endif
 433/*  "run" the final data structures: */
 434static char *indenter(int i);
 435static int free_pipe_list(struct pipe *head, int indent);
 436static int free_pipe(struct pipe *pi, int indent);
 437/*  really run the final data structures: */
 438#ifndef __U_BOOT__
 439static int setup_redirects(struct child_prog *prog, int squirrel[]);
 440#endif
 441static int run_list_real(struct pipe *pi);
 442#ifndef __U_BOOT__
 443static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn));
 444#endif
 445static int run_pipe_real(struct pipe *pi);
 446/*   extended glob support: */
 447#ifndef __U_BOOT__
 448static int globhack(const char *src, int flags, glob_t *pglob);
 449static int glob_needed(const char *s);
 450static int xglob(o_string *dest, int flags, glob_t *pglob);
 451#endif
 452/*   variable assignment: */
 453static int is_assignment(const char *s);
 454/*   data structure manipulation: */
 455#ifndef __U_BOOT__
 456static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input);
 457#endif
 458static void initialize_context(struct p_context *ctx);
 459static int done_word(o_string *dest, struct p_context *ctx);
 460static int done_command(struct p_context *ctx);
 461static int done_pipe(struct p_context *ctx, pipe_style type);
 462/*   primary string parsing: */
 463#ifndef __U_BOOT__
 464static int redirect_dup_num(struct in_str *input);
 465static int redirect_opt_num(o_string *o);
 466static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end);
 467static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch);
 468#endif
 469static char *lookup_param(char *src);
 470static char *make_string(char **inp);
 471static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input);
 472#ifndef __U_BOOT__
 473static int parse_string(o_string *dest, struct p_context *ctx, const char *src);
 474#endif
 475static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger);
 476/*   setup: */
 477static int parse_stream_outer(struct in_str *inp, int flag);
 478#ifndef __U_BOOT__
 479static int parse_string_outer(const char *s, int flag);
 480static int parse_file_outer(FILE *f);
 481#endif
 482#ifndef __U_BOOT__
 483/*   job management: */
 484static int checkjobs(struct pipe* fg_pipe);
 485static void insert_bg_job(struct pipe *pi);
 486static void remove_bg_job(struct pipe *pi);
 487#endif
 488/*     local variable support */
 489static char **make_list_in(char **inp, char *name);
 490static char *insert_var_value(char *inp);
 491static char *insert_var_value_sub(char *inp, int tag_subst);
 492
 493#ifndef __U_BOOT__
 494/* Table of built-in functions.  They can be forked or not, depending on
 495 * context: within pipes, they fork.  As simple commands, they do not.
 496 * When used in non-forking context, they can change global variables
 497 * in the parent shell process.  If forked, of course they can not.
 498 * For example, 'unset foo | whatever' will parse and run, but foo will
 499 * still be set at the end. */
 500static struct built_in_command bltins[] = {
 501        {"bg", "Resume a job in the background", builtin_fg_bg},
 502        {"break", "Exit for, while or until loop", builtin_not_written},
 503        {"cd", "Change working directory", builtin_cd},
 504        {"continue", "Continue for, while or until loop", builtin_not_written},
 505        {"env", "Print all environment variables", builtin_env},
 506        {"eval", "Construct and run shell command", builtin_eval},
 507        {"exec", "Exec command, replacing this shell with the exec'd process",
 508                builtin_exec},
 509        {"exit", "Exit from shell()", builtin_exit},
 510        {"export", "Set environment variable", builtin_export},
 511        {"fg", "Bring job into the foreground", builtin_fg_bg},
 512        {"jobs", "Lists the active jobs", builtin_jobs},
 513        {"pwd", "Print current directory", builtin_pwd},
 514        {"read", "Input environment variable", builtin_read},
 515        {"return", "Return from a function", builtin_not_written},
 516        {"set", "Set/unset shell local variables", builtin_set},
 517        {"shift", "Shift positional parameters", builtin_shift},
 518        {"trap", "Trap signals", builtin_not_written},
 519        {"ulimit","Controls resource limits", builtin_not_written},
 520        {"umask","Sets file creation mask", builtin_umask},
 521        {"unset", "Unset environment variable", builtin_unset},
 522        {".", "Source-in and run commands in a file", builtin_source},
 523        {"help", "List shell built-in commands", builtin_help},
 524        {NULL, NULL, NULL}
 525};
 526
 527static const char *set_cwd(void)
 528{
 529        if(cwd==unknown)
 530                cwd = NULL;     /* xgetcwd(arg) called free(arg) */
 531        cwd = xgetcwd((char *)cwd);
 532        if (!cwd)
 533                cwd = unknown;
 534        return cwd;
 535}
 536
 537/* built-in 'eval' handler */
 538static int builtin_eval(struct child_prog *child)
 539{
 540        char *str = NULL;
 541        int rcode = EXIT_SUCCESS;
 542
 543        if (child->argv[1]) {
 544                str = make_string(child->argv + 1);
 545                parse_string_outer(str, FLAG_EXIT_FROM_LOOP |
 546                                        FLAG_PARSE_SEMICOLON);
 547                free(str);
 548                rcode = last_return_code;
 549        }
 550        return rcode;
 551}
 552
 553/* built-in 'cd <path>' handler */
 554static int builtin_cd(struct child_prog *child)
 555{
 556        char *newdir;
 557        if (child->argv[1] == NULL)
 558                newdir = getenv("HOME");
 559        else
 560                newdir = child->argv[1];
 561        if (chdir(newdir)) {
 562                printf("cd: %s: %s\n", newdir, strerror(errno));
 563                return EXIT_FAILURE;
 564        }
 565        set_cwd();
 566        return EXIT_SUCCESS;
 567}
 568
 569/* built-in 'env' handler */
 570static int builtin_env(struct child_prog *dummy)
 571{
 572        char **e = environ;
 573        if (e == NULL) return EXIT_FAILURE;
 574        for (; *e; e++) {
 575                puts(*e);
 576        }
 577        return EXIT_SUCCESS;
 578}
 579
 580/* built-in 'exec' handler */
 581static int builtin_exec(struct child_prog *child)
 582{
 583        if (child->argv[1] == NULL)
 584                return EXIT_SUCCESS;   /* Really? */
 585        child->argv++;
 586        pseudo_exec(child);
 587        /* never returns */
 588}
 589
 590/* built-in 'exit' handler */
 591static int builtin_exit(struct child_prog *child)
 592{
 593        if (child->argv[1] == NULL)
 594                exit(last_return_code);
 595        exit (atoi(child->argv[1]));
 596}
 597
 598/* built-in 'export VAR=value' handler */
 599static int builtin_export(struct child_prog *child)
 600{
 601        int res = 0;
 602        char *name = child->argv[1];
 603
 604        if (name == NULL) {
 605                return (builtin_env(child));
 606        }
 607
 608        name = strdup(name);
 609
 610        if(name) {
 611                char *value = strchr(name, '=');
 612
 613                if (!value) {
 614                        char *tmp;
 615                        /* They are exporting something without an =VALUE */
 616
 617                        value = get_local_var(name);
 618                        if (value) {
 619                                size_t ln = strlen(name);
 620
 621                                tmp = realloc(name, ln+strlen(value)+2);
 622                                if(tmp==NULL)
 623                                        res = -1;
 624                                else {
 625                                        sprintf(tmp+ln, "=%s", value);
 626                                        name = tmp;
 627                                }
 628                        } else {
 629                                /* bash does not return an error when trying to export
 630                                 * an undefined variable.  Do likewise. */
 631                                res = 1;
 632                        }
 633                }
 634        }
 635        if (res<0)
 636                perror_msg("export");
 637        else if(res==0)
 638                res = set_local_var(name, 1);
 639        else
 640                res = 0;
 641        free(name);
 642        return res;
 643}
 644
 645/* built-in 'fg' and 'bg' handler */
 646static int builtin_fg_bg(struct child_prog *child)
 647{
 648        int i, jobnum;
 649        struct pipe *pi=NULL;
 650
 651        if (!interactive)
 652                return EXIT_FAILURE;
 653        /* If they gave us no args, assume they want the last backgrounded task */
 654        if (!child->argv[1]) {
 655                for (pi = job_list; pi; pi = pi->next) {
 656                        if (pi->jobid == last_jobid) {
 657                                break;
 658                        }
 659                }
 660                if (!pi) {
 661                        error_msg("%s: no current job", child->argv[0]);
 662                        return EXIT_FAILURE;
 663                }
 664        } else {
 665                if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) {
 666                        error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]);
 667                        return EXIT_FAILURE;
 668                }
 669                for (pi = job_list; pi; pi = pi->next) {
 670                        if (pi->jobid == jobnum) {
 671                                break;
 672                        }
 673                }
 674                if (!pi) {
 675                        error_msg("%s: %d: no such job", child->argv[0], jobnum);
 676                        return EXIT_FAILURE;
 677                }
 678        }
 679
 680        if (*child->argv[0] == 'f') {
 681                /* Put the job into the foreground.  */
 682                tcsetpgrp(shell_terminal, pi->pgrp);
 683        }
 684
 685        /* Restart the processes in the job */
 686        for (i = 0; i < pi->num_progs; i++)
 687                pi->progs[i].is_stopped = 0;
 688
 689        if ( (i=kill(- pi->pgrp, SIGCONT)) < 0) {
 690                if (i == ESRCH) {
 691                        remove_bg_job(pi);
 692                } else {
 693                        perror_msg("kill (SIGCONT)");
 694                }
 695        }
 696
 697        pi->stopped_progs = 0;
 698        return EXIT_SUCCESS;
 699}
 700
 701/* built-in 'help' handler */
 702static int builtin_help(struct child_prog *dummy)
 703{
 704        struct built_in_command *x;
 705
 706        printf("\nBuilt-in commands:\n");
 707        printf("-------------------\n");
 708        for (x = bltins; x->cmd; x++) {
 709                if (x->descr==NULL)
 710                        continue;
 711                printf("%s\t%s\n", x->cmd, x->descr);
 712        }
 713        printf("\n\n");
 714        return EXIT_SUCCESS;
 715}
 716
 717/* built-in 'jobs' handler */
 718static int builtin_jobs(struct child_prog *child)
 719{
 720        struct pipe *job;
 721        char *status_string;
 722
 723        for (job = job_list; job; job = job->next) {
 724                if (job->running_progs == job->stopped_progs)
 725                        status_string = "Stopped";
 726                else
 727                        status_string = "Running";
 728
 729                printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text);
 730        }
 731        return EXIT_SUCCESS;
 732}
 733
 734
 735/* built-in 'pwd' handler */
 736static int builtin_pwd(struct child_prog *dummy)
 737{
 738        puts(set_cwd());
 739        return EXIT_SUCCESS;
 740}
 741
 742/* built-in 'read VAR' handler */
 743static int builtin_read(struct child_prog *child)
 744{
 745        int res;
 746
 747        if (child->argv[1]) {
 748                char string[BUFSIZ];
 749                char *var = 0;
 750
 751                string[0] = 0;  /* In case stdin has only EOF */
 752                /* read string */
 753                fgets(string, sizeof(string), stdin);
 754                chomp(string);
 755                var = malloc(strlen(child->argv[1])+strlen(string)+2);
 756                if(var) {
 757                        sprintf(var, "%s=%s", child->argv[1], string);
 758                        res = set_local_var(var, 0);
 759                } else
 760                        res = -1;
 761                if (res)
 762                        fprintf(stderr, "read: %m\n");
 763                free(var);      /* So not move up to avoid breaking errno */
 764                return res;
 765        } else {
 766                do res=getchar(); while(res!='\n' && res!=EOF);
 767                return 0;
 768        }
 769}
 770
 771/* built-in 'set VAR=value' handler */
 772static int builtin_set(struct child_prog *child)
 773{
 774        char *temp = child->argv[1];
 775        struct variables *e;
 776
 777        if (temp == NULL)
 778                for(e = top_vars; e; e=e->next)
 779                        printf("%s=%s\n", e->name, e->value);
 780        else
 781                set_local_var(temp, 0);
 782
 783                return EXIT_SUCCESS;
 784}
 785
 786
 787/* Built-in 'shift' handler */
 788static int builtin_shift(struct child_prog *child)
 789{
 790        int n=1;
 791        if (child->argv[1]) {
 792                n=atoi(child->argv[1]);
 793        }
 794        if (n>=0 && n<global_argc) {
 795                /* XXX This probably breaks $0 */
 796                global_argc -= n;
 797                global_argv += n;
 798                return EXIT_SUCCESS;
 799        } else {
 800                return EXIT_FAILURE;
 801        }
 802}
 803
 804/* Built-in '.' handler (read-in and execute commands from file) */
 805static int builtin_source(struct child_prog *child)
 806{
 807        FILE *input;
 808        int status;
 809
 810        if (child->argv[1] == NULL)
 811                return EXIT_FAILURE;
 812
 813        /* XXX search through $PATH is missing */
 814        input = fopen(child->argv[1], "r");
 815        if (!input) {
 816                error_msg("Couldn't open file '%s'", child->argv[1]);
 817                return EXIT_FAILURE;
 818        }
 819
 820        /* Now run the file */
 821        /* XXX argv and argc are broken; need to save old global_argv
 822         * (pointer only is OK!) on this stack frame,
 823         * set global_argv=child->argv+1, recurse, and restore. */
 824        mark_open(fileno(input));
 825        status = parse_file_outer(input);
 826        mark_closed(fileno(input));
 827        fclose(input);
 828        return (status);
 829}
 830
 831static int builtin_umask(struct child_prog *child)
 832{
 833        mode_t new_umask;
 834        const char *arg = child->argv[1];
 835        char *end;
 836        if (arg) {
 837                new_umask=strtoul(arg, &end, 8);
 838                if (*end!='\0' || end == arg) {
 839                        return EXIT_FAILURE;
 840                }
 841        } else {
 842                printf("%.3o\n", (unsigned int) (new_umask=umask(0)));
 843        }
 844        umask(new_umask);
 845        return EXIT_SUCCESS;
 846}
 847
 848/* built-in 'unset VAR' handler */
 849static int builtin_unset(struct child_prog *child)
 850{
 851        /* bash returned already true */
 852        unset_local_var(child->argv[1]);
 853        return EXIT_SUCCESS;
 854}
 855
 856static int builtin_not_written(struct child_prog *child)
 857{
 858        printf("builtin_%s not written\n",child->argv[0]);
 859        return EXIT_FAILURE;
 860}
 861#endif
 862
 863static int b_check_space(o_string *o, int len)
 864{
 865        /* It would be easy to drop a more restrictive policy
 866         * in here, such as setting a maximum string length */
 867        if (o->length + len > o->maxlen) {
 868                char *old_data = o->data;
 869                /* assert (data == NULL || o->maxlen != 0); */
 870                o->maxlen += max(2*len, B_CHUNK);
 871                o->data = realloc(o->data, 1 + o->maxlen);
 872                if (o->data == NULL) {
 873                        free(old_data);
 874                }
 875        }
 876        return o->data == NULL;
 877}
 878
 879static int b_addchr(o_string *o, int ch)
 880{
 881        debug_printf("b_addchr: %c %d %p\n", ch, o->length, o);
 882        if (b_check_space(o, 1)) return B_NOSPAC;
 883        o->data[o->length] = ch;
 884        o->length++;
 885        o->data[o->length] = '\0';
 886        return 0;
 887}
 888
 889static void b_reset(o_string *o)
 890{
 891        o->length = 0;
 892        o->nonnull = 0;
 893        if (o->data != NULL) *o->data = '\0';
 894}
 895
 896static void b_free(o_string *o)
 897{
 898        b_reset(o);
 899        free(o->data);
 900        o->data = NULL;
 901        o->maxlen = 0;
 902}
 903
 904/* My analysis of quoting semantics tells me that state information
 905 * is associated with a destination, not a source.
 906 */
 907static int b_addqchr(o_string *o, int ch, int quote)
 908{
 909        if (quote && strchr("*?[\\",ch)) {
 910                int rc;
 911                rc = b_addchr(o, '\\');
 912                if (rc) return rc;
 913        }
 914        return b_addchr(o, ch);
 915}
 916
 917#ifndef __U_BOOT__
 918static int b_adduint(o_string *o, unsigned int i)
 919{
 920        int r;
 921        char *p = simple_itoa(i);
 922        /* no escape checking necessary */
 923        do r=b_addchr(o, *p++); while (r==0 && *p);
 924        return r;
 925}
 926#endif
 927
 928static int static_get(struct in_str *i)
 929{
 930        int ch = *i->p++;
 931        if (ch=='\0') return EOF;
 932        return ch;
 933}
 934
 935static int static_peek(struct in_str *i)
 936{
 937        return *i->p;
 938}
 939
 940#ifndef __U_BOOT__
 941static inline void cmdedit_set_initial_prompt(void)
 942{
 943#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
 944        PS1 = NULL;
 945#else
 946        PS1 = getenv("PS1");
 947        if(PS1==0)
 948                PS1 = "\\w \\$ ";
 949#endif
 950}
 951
 952static inline void setup_prompt_string(int promptmode, char **prompt_str)
 953{
 954        debug_printf("setup_prompt_string %d ",promptmode);
 955#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
 956        /* Set up the prompt */
 957        if (promptmode == 1) {
 958                free(PS1);
 959                PS1=xmalloc(strlen(cwd)+4);
 960                sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ?  "$ ":"# ");
 961                *prompt_str = PS1;
 962        } else {
 963                *prompt_str = PS2;
 964        }
 965#else
 966        *prompt_str = (promptmode==1)? PS1 : PS2;
 967#endif
 968        debug_printf("result %s\n",*prompt_str);
 969}
 970#endif
 971
 972static void get_user_input(struct in_str *i)
 973{
 974#ifndef __U_BOOT__
 975        char *prompt_str;
 976        static char the_command[BUFSIZ];
 977
 978        setup_prompt_string(i->promptmode, &prompt_str);
 979#ifdef CONFIG_FEATURE_COMMAND_EDITING
 980        /*
 981         ** enable command line editing only while a command line
 982         ** is actually being read; otherwise, we'll end up bequeathing
 983         ** atexit() handlers and other unwanted stuff to our
 984         ** child processes (rob@sysgo.de)
 985         */
 986        cmdedit_read_input(prompt_str, the_command);
 987#else
 988        fputs(prompt_str, stdout);
 989        fflush(stdout);
 990        the_command[0]=fgetc(i->file);
 991        the_command[1]='\0';
 992#endif
 993        fflush(stdout);
 994        i->p = the_command;
 995#else
 996        int n;
 997        static char the_command[CONFIG_SYS_CBSIZE];
 998
 999#ifdef CONFIG_BOOT_RETRY_TIME
1000#  ifndef CONFIG_RESET_TO_RETRY
1001#       error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1002#  endif
1003        reset_cmd_timeout();
1004#endif
1005        i->__promptme = 1;
1006        if (i->promptmode == 1) {
1007                n = readline(CONFIG_SYS_PROMPT);
1008        } else {
1009                n = readline(CONFIG_SYS_PROMPT_HUSH_PS2);
1010        }
1011#ifdef CONFIG_BOOT_RETRY_TIME
1012        if (n == -2) {
1013          puts("\nTimeout waiting for command\n");
1014#  ifdef CONFIG_RESET_TO_RETRY
1015          do_reset(NULL, 0, 0, NULL);
1016#  else
1017#       error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1018#  endif
1019        }
1020#endif
1021        if (n == -1 ) {
1022                flag_repeat = 0;
1023                i->__promptme = 0;
1024        }
1025        n = strlen(console_buffer);
1026        console_buffer[n] = '\n';
1027        console_buffer[n+1]= '\0';
1028        if (had_ctrlc()) flag_repeat = 0;
1029        clear_ctrlc();
1030        do_repeat = 0;
1031        if (i->promptmode == 1) {
1032                if (console_buffer[0] == '\n'&& flag_repeat == 0) {
1033                        strcpy(the_command,console_buffer);
1034                }
1035                else {
1036                        if (console_buffer[0] != '\n') {
1037                                strcpy(the_command,console_buffer);
1038                                flag_repeat = 1;
1039                        }
1040                        else {
1041                                do_repeat = 1;
1042                        }
1043                }
1044                i->p = the_command;
1045        }
1046        else {
1047                if (console_buffer[0] != '\n') {
1048                        if (strlen(the_command) + strlen(console_buffer)
1049                            < CONFIG_SYS_CBSIZE) {
1050                                n = strlen(the_command);
1051                                the_command[n-1] = ' ';
1052                                strcpy(&the_command[n],console_buffer);
1053                        }
1054                        else {
1055                                the_command[0] = '\n';
1056                                the_command[1] = '\0';
1057                                flag_repeat = 0;
1058                        }
1059                }
1060                if (i->__promptme == 0) {
1061                        the_command[0] = '\n';
1062                        the_command[1] = '\0';
1063                }
1064                i->p = console_buffer;
1065        }
1066#endif
1067}
1068
1069/* This is the magic location that prints prompts
1070 * and gets data back from the user */
1071static int file_get(struct in_str *i)
1072{
1073        int ch;
1074
1075        ch = 0;
1076        /* If there is data waiting, eat it up */
1077        if (i->p && *i->p) {
1078                ch = *i->p++;
1079        } else {
1080                /* need to double check i->file because we might be doing something
1081                 * more complicated by now, like sourcing or substituting. */
1082#ifndef __U_BOOT__
1083                if (i->__promptme && interactive && i->file == stdin) {
1084                        while(! i->p || (interactive && strlen(i->p)==0) ) {
1085#else
1086                        while(! i->p  || strlen(i->p)==0 ) {
1087#endif
1088                                get_user_input(i);
1089                        }
1090                        i->promptmode=2;
1091#ifndef __U_BOOT__
1092                        i->__promptme = 0;
1093#endif
1094                        if (i->p && *i->p) {
1095                                ch = *i->p++;
1096                        }
1097#ifndef __U_BOOT__
1098                } else {
1099                        ch = fgetc(i->file);
1100                }
1101
1102#endif
1103                debug_printf("b_getch: got a %d\n", ch);
1104        }
1105#ifndef __U_BOOT__
1106        if (ch == '\n') i->__promptme=1;
1107#endif
1108        return ch;
1109}
1110
1111/* All the callers guarantee this routine will never be
1112 * used right after a newline, so prompting is not needed.
1113 */
1114static int file_peek(struct in_str *i)
1115{
1116#ifndef __U_BOOT__
1117        if (i->p && *i->p) {
1118#endif
1119                return *i->p;
1120#ifndef __U_BOOT__
1121        } else {
1122                i->peek_buf[0] = fgetc(i->file);
1123                i->peek_buf[1] = '\0';
1124                i->p = i->peek_buf;
1125                debug_printf("b_peek: got a %d\n", *i->p);
1126                return *i->p;
1127        }
1128#endif
1129}
1130
1131#ifndef __U_BOOT__
1132static void setup_file_in_str(struct in_str *i, FILE *f)
1133#else
1134static void setup_file_in_str(struct in_str *i)
1135#endif
1136{
1137        i->peek = file_peek;
1138        i->get = file_get;
1139        i->__promptme=1;
1140        i->promptmode=1;
1141#ifndef __U_BOOT__
1142        i->file = f;
1143#endif
1144        i->p = NULL;
1145}
1146
1147static void setup_string_in_str(struct in_str *i, const char *s)
1148{
1149        i->peek = static_peek;
1150        i->get = static_get;
1151        i->__promptme=1;
1152        i->promptmode=1;
1153        i->p = s;
1154}
1155
1156#ifndef __U_BOOT__
1157static void mark_open(int fd)
1158{
1159        struct close_me *new = xmalloc(sizeof(struct close_me));
1160        new->fd = fd;
1161        new->next = close_me_head;
1162        close_me_head = new;
1163}
1164
1165static void mark_closed(int fd)
1166{
1167        struct close_me *tmp;
1168        if (close_me_head == NULL || close_me_head->fd != fd)
1169                error_msg_and_die("corrupt close_me");
1170        tmp = close_me_head;
1171        close_me_head = close_me_head->next;
1172        free(tmp);
1173}
1174
1175static void close_all(void)
1176{
1177        struct close_me *c;
1178        for (c=close_me_head; c; c=c->next) {
1179                close(c->fd);
1180        }
1181        close_me_head = NULL;
1182}
1183
1184/* squirrel != NULL means we squirrel away copies of stdin, stdout,
1185 * and stderr if they are redirected. */
1186static int setup_redirects(struct child_prog *prog, int squirrel[])
1187{
1188        int openfd, mode;
1189        struct redir_struct *redir;
1190
1191        for (redir=prog->redirects; redir; redir=redir->next) {
1192                if (redir->dup == -1 && redir->word.gl_pathv == NULL) {
1193                        /* something went wrong in the parse.  Pretend it didn't happen */
1194                        continue;
1195                }
1196                if (redir->dup == -1) {
1197                        mode=redir_table[redir->type].mode;
1198                        openfd = open(redir->word.gl_pathv[0], mode, 0666);
1199                        if (openfd < 0) {
1200                        /* this could get lost if stderr has been redirected, but
1201                           bash and ash both lose it as well (though zsh doesn't!) */
1202                                perror_msg("error opening %s", redir->word.gl_pathv[0]);
1203                                return 1;
1204                        }
1205                } else {
1206                        openfd = redir->dup;
1207                }
1208
1209                if (openfd != redir->fd) {
1210                        if (squirrel && redir->fd < 3) {
1211                                squirrel[redir->fd] = dup(redir->fd);
1212                        }
1213                        if (openfd == -3) {
1214                                close(openfd);
1215                        } else {
1216                                dup2(openfd, redir->fd);
1217                                if (redir->dup == -1)
1218                                        close (openfd);
1219                        }
1220                }
1221        }
1222        return 0;
1223}
1224
1225static void restore_redirects(int squirrel[])
1226{
1227        int i, fd;
1228        for (i=0; i<3; i++) {
1229                fd = squirrel[i];
1230                if (fd != -1) {
1231                        /* No error checking.  I sure wouldn't know what
1232                         * to do with an error if I found one! */
1233                        dup2(fd, i);
1234                        close(fd);
1235                }
1236        }
1237}
1238
1239/* never returns */
1240/* XXX no exit() here.  If you don't exec, use _exit instead.
1241 * The at_exit handlers apparently confuse the calling process,
1242 * in particular stdin handling.  Not sure why? */
1243static void pseudo_exec(struct child_prog *child)
1244{
1245        int i, rcode;
1246        char *p;
1247        struct built_in_command *x;
1248        if (child->argv) {
1249                for (i=0; is_assignment(child->argv[i]); i++) {
1250                        debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]);
1251                        p = insert_var_value(child->argv[i]);
1252                        putenv(strdup(p));
1253                        if (p != child->argv[i]) free(p);
1254                }
1255                child->argv+=i;  /* XXX this hack isn't so horrible, since we are about
1256                                        to exit, and therefore don't need to keep data
1257                                        structures consistent for free() use. */
1258                /* If a variable is assigned in a forest, and nobody listens,
1259                 * was it ever really set?
1260                 */
1261                if (child->argv[0] == NULL) {
1262                        _exit(EXIT_SUCCESS);
1263                }
1264
1265                /*
1266                 * Check if the command matches any of the builtins.
1267                 * Depending on context, this might be redundant.  But it's
1268                 * easier to waste a few CPU cycles than it is to figure out
1269                 * if this is one of those cases.
1270                 */
1271                for (x = bltins; x->cmd; x++) {
1272                        if (strcmp(child->argv[0], x->cmd) == 0 ) {
1273                                debug_printf("builtin exec %s\n", child->argv[0]);
1274                                rcode = x->function(child);
1275                                fflush(stdout);
1276                                _exit(rcode);
1277                        }
1278                }
1279
1280                /* Check if the command matches any busybox internal commands
1281                 * ("applets") here.
1282                 * FIXME: This feature is not 100% safe, since
1283                 * BusyBox is not fully reentrant, so we have no guarantee the things
1284                 * from the .bss are still zeroed, or that things from .data are still
1285                 * at their defaults.  We could exec ourself from /proc/self/exe, but I
1286                 * really dislike relying on /proc for things.  We could exec ourself
1287                 * from global_argv[0], but if we are in a chroot, we may not be able
1288                 * to find ourself... */
1289#ifdef CONFIG_FEATURE_SH_STANDALONE_SHELL
1290                {
1291                        int argc_l;
1292                        char** argv_l=child->argv;
1293                        char *name = child->argv[0];
1294
1295#ifdef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN
1296                        /* Following discussions from November 2000 on the busybox mailing
1297                         * list, the default configuration, (without
1298                         * get_last_path_component()) lets the user force use of an
1299                         * external command by specifying the full (with slashes) filename.
1300                         * If you enable CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN then applets
1301                         * _aways_ override external commands, so if you want to run
1302                         * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
1303                         * filesystem and is _not_ busybox.  Some systems may want this,
1304                         * most do not.  */
1305                        name = get_last_path_component(name);
1306#endif
1307                        /* Count argc for use in a second... */
1308                        for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++);
1309                        optind = 1;
1310                        debug_printf("running applet %s\n", name);
1311                        run_applet_by_name(name, argc_l, child->argv);
1312                }
1313#endif
1314                debug_printf("exec of %s\n",child->argv[0]);
1315                execvp(child->argv[0],child->argv);
1316                perror_msg("couldn't exec: %s",child->argv[0]);
1317                _exit(1);
1318        } else if (child->group) {
1319                debug_printf("runtime nesting to group\n");
1320                interactive=0;    /* crucial!!!! */
1321                rcode = run_list_real(child->group);
1322                /* OK to leak memory by not calling free_pipe_list,
1323                 * since this process is about to exit */
1324                _exit(rcode);
1325        } else {
1326                /* Can happen.  See what bash does with ">foo" by itself. */
1327                debug_printf("trying to pseudo_exec null command\n");
1328                _exit(EXIT_SUCCESS);
1329        }
1330}
1331
1332static void insert_bg_job(struct pipe *pi)
1333{
1334        struct pipe *thejob;
1335
1336        /* Linear search for the ID of the job to use */
1337        pi->jobid = 1;
1338        for (thejob = job_list; thejob; thejob = thejob->next)
1339                if (thejob->jobid >= pi->jobid)
1340                        pi->jobid = thejob->jobid + 1;
1341
1342        /* add thejob to the list of running jobs */
1343        if (!job_list) {
1344                thejob = job_list = xmalloc(sizeof(*thejob));
1345        } else {
1346                for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */;
1347                thejob->next = xmalloc(sizeof(*thejob));
1348                thejob = thejob->next;
1349        }
1350
1351        /* physically copy the struct job */
1352        memcpy(thejob, pi, sizeof(struct pipe));
1353        thejob->next = NULL;
1354        thejob->running_progs = thejob->num_progs;
1355        thejob->stopped_progs = 0;
1356        thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */
1357
1358        /*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */
1359        {
1360                char *bar=thejob->text;
1361                char **foo=pi->progs[0].argv;
1362                while(foo && *foo) {
1363                        bar += sprintf(bar, "%s ", *foo++);
1364                }
1365        }
1366
1367        /* we don't wait for background thejobs to return -- append it
1368           to the list of backgrounded thejobs and leave it alone */
1369        printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid);
1370        last_bg_pid = thejob->progs[0].pid;
1371        last_jobid = thejob->jobid;
1372}
1373
1374/* remove a backgrounded job */
1375static void remove_bg_job(struct pipe *pi)
1376{
1377        struct pipe *prev_pipe;
1378
1379        if (pi == job_list) {
1380                job_list = pi->next;
1381        } else {
1382                prev_pipe = job_list;
1383                while (prev_pipe->next != pi)
1384                        prev_pipe = prev_pipe->next;
1385                prev_pipe->next = pi->next;
1386        }
1387        if (job_list)
1388                last_jobid = job_list->jobid;
1389        else
1390                last_jobid = 0;
1391
1392        pi->stopped_progs = 0;
1393        free_pipe(pi, 0);
1394        free(pi);
1395}
1396
1397/* Checks to see if any processes have exited -- if they
1398   have, figure out why and see if a job has completed */
1399static int checkjobs(struct pipe* fg_pipe)
1400{
1401        int attributes;
1402        int status;
1403        int prognum = 0;
1404        struct pipe *pi;
1405        pid_t childpid;
1406
1407        attributes = WUNTRACED;
1408        if (fg_pipe==NULL) {
1409                attributes |= WNOHANG;
1410        }
1411
1412        while ((childpid = waitpid(-1, &status, attributes)) > 0) {
1413                if (fg_pipe) {
1414                        int i, rcode = 0;
1415                        for (i=0; i < fg_pipe->num_progs; i++) {
1416                                if (fg_pipe->progs[i].pid == childpid) {
1417                                        if (i==fg_pipe->num_progs-1)
1418                                                rcode=WEXITSTATUS(status);
1419                                        (fg_pipe->num_progs)--;
1420                                        return(rcode);
1421                                }
1422                        }
1423                }
1424
1425                for (pi = job_list; pi; pi = pi->next) {
1426                        prognum = 0;
1427                        while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) {
1428                                prognum++;
1429                        }
1430                        if (prognum < pi->num_progs)
1431                                break;
1432                }
1433
1434                if(pi==NULL) {
1435                        debug_printf("checkjobs: pid %d was not in our list!\n", childpid);
1436                        continue;
1437                }
1438
1439                if (WIFEXITED(status) || WIFSIGNALED(status)) {
1440                        /* child exited */
1441                        pi->running_progs--;
1442                        pi->progs[prognum].pid = 0;
1443
1444                        if (!pi->running_progs) {
1445                                printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text);
1446                                remove_bg_job(pi);
1447                        }
1448                } else {
1449                        /* child stopped */
1450                        pi->stopped_progs++;
1451                        pi->progs[prognum].is_stopped = 1;
1452
1453#if 0
1454                        /* Printing this stuff is a pain, since it tends to
1455                         * overwrite the prompt an inconveinient moments.  So
1456                         * don't do that.  */
1457                        if (pi->stopped_progs == pi->num_progs) {
1458                                printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text);
1459                        }
1460#endif
1461                }
1462        }
1463
1464        if (childpid == -1 && errno != ECHILD)
1465                perror_msg("waitpid");
1466
1467        /* move the shell to the foreground */
1468        /*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */
1469        /*      perror_msg("tcsetpgrp-2"); */
1470        return -1;
1471}
1472
1473/* Figure out our controlling tty, checking in order stderr,
1474 * stdin, and stdout.  If check_pgrp is set, also check that
1475 * we belong to the foreground process group associated with
1476 * that tty.  The value of shell_terminal is needed in order to call
1477 * tcsetpgrp(shell_terminal, ...); */
1478void controlling_tty(int check_pgrp)
1479{
1480        pid_t curpgrp;
1481
1482        if ((curpgrp = tcgetpgrp(shell_terminal = 2)) < 0
1483                        && (curpgrp = tcgetpgrp(shell_terminal = 0)) < 0
1484                        && (curpgrp = tcgetpgrp(shell_terminal = 1)) < 0)
1485                goto shell_terminal_error;
1486
1487        if (check_pgrp && curpgrp != getpgid(0))
1488                goto shell_terminal_error;
1489
1490        return;
1491
1492shell_terminal_error:
1493                shell_terminal = -1;
1494                return;
1495}
1496#endif
1497
1498/* run_pipe_real() starts all the jobs, but doesn't wait for anything
1499 * to finish.  See checkjobs().
1500 *
1501 * return code is normally -1, when the caller has to wait for children
1502 * to finish to determine the exit status of the pipe.  If the pipe
1503 * is a simple builtin command, however, the action is done by the
1504 * time run_pipe_real returns, and the exit code is provided as the
1505 * return value.
1506 *
1507 * The input of the pipe is always stdin, the output is always
1508 * stdout.  The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
1509 * because it tries to avoid running the command substitution in
1510 * subshell, when that is in fact necessary.  The subshell process
1511 * now has its stdout directed to the input of the appropriate pipe,
1512 * so this routine is noticeably simpler.
1513 */
1514static int run_pipe_real(struct pipe *pi)
1515{
1516        int i;
1517#ifndef __U_BOOT__
1518        int nextin, nextout;
1519        int pipefds[2];                         /* pipefds[0] is for reading */
1520        struct child_prog *child;
1521        struct built_in_command *x;
1522        char *p;
1523# if __GNUC__
1524        /* Avoid longjmp clobbering */
1525        (void) &i;
1526        (void) &nextin;
1527        (void) &nextout;
1528        (void) &child;
1529# endif
1530#else
1531        int nextin;
1532        int flag = do_repeat ? CMD_FLAG_REPEAT : 0;
1533        struct child_prog *child;
1534        char *p;
1535# if __GNUC__
1536        /* Avoid longjmp clobbering */
1537        (void) &i;
1538        (void) &nextin;
1539        (void) &child;
1540# endif
1541#endif  /* __U_BOOT__ */
1542
1543        nextin = 0;
1544#ifndef __U_BOOT__
1545        pi->pgrp = -1;
1546#endif
1547
1548        /* Check if this is a simple builtin (not part of a pipe).
1549         * Builtins within pipes have to fork anyway, and are handled in
1550         * pseudo_exec.  "echo foo | read bar" doesn't work on bash, either.
1551         */
1552        if (pi->num_progs == 1) child = & (pi->progs[0]);
1553#ifndef __U_BOOT__
1554        if (pi->num_progs == 1 && child->group && child->subshell == 0) {
1555                int squirrel[] = {-1, -1, -1};
1556                int rcode;
1557                debug_printf("non-subshell grouping\n");
1558                setup_redirects(child, squirrel);
1559                /* XXX could we merge code with following builtin case,
1560                 * by creating a pseudo builtin that calls run_list_real? */
1561                rcode = run_list_real(child->group);
1562                restore_redirects(squirrel);
1563#else
1564                if (pi->num_progs == 1 && child->group) {
1565                int rcode;
1566                debug_printf("non-subshell grouping\n");
1567                rcode = run_list_real(child->group);
1568#endif
1569                return rcode;
1570        } else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) {
1571                for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ }
1572                if (i!=0 && child->argv[i]==NULL) {
1573                        /* assignments, but no command: set the local environment */
1574                        for (i=0; child->argv[i]!=NULL; i++) {
1575
1576                                /* Ok, this case is tricky.  We have to decide if this is a
1577                                 * local variable, or an already exported variable.  If it is
1578                                 * already exported, we have to export the new value.  If it is
1579                                 * not exported, we need only set this as a local variable.
1580                                 * This junk is all to decide whether or not to export this
1581                                 * variable. */
1582                                int export_me=0;
1583                                char *name, *value;
1584                                name = xstrdup(child->argv[i]);
1585                                debug_printf("Local environment set: %s\n", name);
1586                                value = strchr(name, '=');
1587                                if (value)
1588                                        *value=0;
1589#ifndef __U_BOOT__
1590                                if ( get_local_var(name)) {
1591                                        export_me=1;
1592                                }
1593#endif
1594                                free(name);
1595                                p = insert_var_value(child->argv[i]);
1596                                set_local_var(p, export_me);
1597                                if (p != child->argv[i]) free(p);
1598                        }
1599                        return EXIT_SUCCESS;   /* don't worry about errors in set_local_var() yet */
1600                }
1601                for (i = 0; is_assignment(child->argv[i]); i++) {
1602                        p = insert_var_value(child->argv[i]);
1603#ifndef __U_BOOT__
1604                        putenv(strdup(p));
1605#else
1606                        set_local_var(p, 0);
1607#endif
1608                        if (p != child->argv[i]) {
1609                                child->sp--;
1610                                free(p);
1611                        }
1612                }
1613                if (child->sp) {
1614                        char * str = NULL;
1615
1616                        str = make_string((child->argv + i));
1617                        parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING);
1618                        free(str);
1619                        return last_return_code;
1620                }
1621#ifndef __U_BOOT__
1622                for (x = bltins; x->cmd; x++) {
1623                        if (strcmp(child->argv[i], x->cmd) == 0 ) {
1624                                int squirrel[] = {-1, -1, -1};
1625                                int rcode;
1626                                if (x->function == builtin_exec && child->argv[i+1]==NULL) {
1627                                        debug_printf("magic exec\n");
1628                                        setup_redirects(child,NULL);
1629                                        return EXIT_SUCCESS;
1630                                }
1631                                debug_printf("builtin inline %s\n", child->argv[0]);
1632                                /* XXX setup_redirects acts on file descriptors, not FILEs.
1633                                 * This is perfect for work that comes after exec().
1634                                 * Is it really safe for inline use?  Experimentally,
1635                                 * things seem to work with glibc. */
1636                                setup_redirects(child, squirrel);
1637
1638                                child->argv += i;  /* XXX horrible hack */
1639                                rcode = x->function(child);
1640                                /* XXX restore hack so free() can work right */
1641                                child->argv -= i;
1642                                restore_redirects(squirrel);
1643                        }
1644                        return rcode;
1645                }
1646#else
1647                /* check ";", because ,example , argv consist from
1648                 * "help;flinfo" must not execute
1649                 */
1650                if (strchr(child->argv[i], ';')) {
1651                        printf("Unknown command '%s' - try 'help' or use "
1652                                        "'run' command\n", child->argv[i]);
1653                        return -1;
1654                }
1655                /* Process the command */
1656                return cmd_process(flag, child->argc, child->argv,
1657                                   &flag_repeat, NULL);
1658#endif
1659        }
1660#ifndef __U_BOOT__
1661
1662        for (i = 0; i < pi->num_progs; i++) {
1663                child = & (pi->progs[i]);
1664
1665                /* pipes are inserted between pairs of commands */
1666                if ((i + 1) < pi->num_progs) {
1667                        if (pipe(pipefds)<0) perror_msg_and_die("pipe");
1668                        nextout = pipefds[1];
1669                } else {
1670                        nextout=1;
1671                        pipefds[0] = -1;
1672                }
1673
1674                /* XXX test for failed fork()? */
1675                if (!(child->pid = fork())) {
1676                        /* Set the handling for job control signals back to the default.  */
1677                        signal(SIGINT, SIG_DFL);
1678                        signal(SIGQUIT, SIG_DFL);
1679                        signal(SIGTERM, SIG_DFL);
1680                        signal(SIGTSTP, SIG_DFL);
1681                        signal(SIGTTIN, SIG_DFL);
1682                        signal(SIGTTOU, SIG_DFL);
1683                        signal(SIGCHLD, SIG_DFL);
1684
1685                        close_all();
1686
1687                        if (nextin != 0) {
1688                                dup2(nextin, 0);
1689                                close(nextin);
1690                        }
1691                        if (nextout != 1) {
1692                                dup2(nextout, 1);
1693                                close(nextout);
1694                        }
1695                        if (pipefds[0]!=-1) {
1696                                close(pipefds[0]);  /* opposite end of our output pipe */
1697                        }
1698
1699                        /* Like bash, explicit redirects override pipes,
1700                         * and the pipe fd is available for dup'ing. */
1701                        setup_redirects(child,NULL);
1702
1703                        if (interactive && pi->followup!=PIPE_BG) {
1704                                /* If we (the child) win the race, put ourselves in the process
1705                                 * group whose leader is the first process in this pipe. */
1706                                if (pi->pgrp < 0) {
1707                                        pi->pgrp = getpid();
1708                                }
1709                                if (setpgid(0, pi->pgrp) == 0) {
1710                                        tcsetpgrp(2, pi->pgrp);
1711                                }
1712                        }
1713
1714                        pseudo_exec(child);
1715                }
1716
1717
1718                /* put our child in the process group whose leader is the
1719                   first process in this pipe */
1720                if (pi->pgrp < 0) {
1721                        pi->pgrp = child->pid;
1722                }
1723                /* Don't check for errors.  The child may be dead already,
1724                 * in which case setpgid returns error code EACCES. */
1725                setpgid(child->pid, pi->pgrp);
1726
1727                if (nextin != 0)
1728                        close(nextin);
1729                if (nextout != 1)
1730                        close(nextout);
1731
1732                /* If there isn't another process, nextin is garbage
1733                   but it doesn't matter */
1734                nextin = pipefds[0];
1735        }
1736#endif
1737        return -1;
1738}
1739
1740static int run_list_real(struct pipe *pi)
1741{
1742        char *save_name = NULL;
1743        char **list = NULL;
1744        char **save_list = NULL;
1745        struct pipe *rpipe;
1746        int flag_rep = 0;
1747#ifndef __U_BOOT__
1748        int save_num_progs;
1749#endif
1750        int rcode=0, flag_skip=1;
1751        int flag_restore = 0;
1752        int if_code=0, next_if_code=0;  /* need double-buffer to handle elif */
1753        reserved_style rmode, skip_more_in_this_rmode=RES_XXXX;
1754        /* check syntax for "for" */
1755        for (rpipe = pi; rpipe; rpipe = rpipe->next) {
1756                if ((rpipe->r_mode == RES_IN ||
1757                    rpipe->r_mode == RES_FOR) &&
1758                    (rpipe->next == NULL)) {
1759                                syntax();
1760#ifdef __U_BOOT__
1761                                flag_repeat = 0;
1762#endif
1763                                return 1;
1764                }
1765                if ((rpipe->r_mode == RES_IN &&
1766                        (rpipe->next->r_mode == RES_IN &&
1767                        rpipe->next->progs->argv != NULL))||
1768                        (rpipe->r_mode == RES_FOR &&
1769                        rpipe->next->r_mode != RES_IN)) {
1770                                syntax();
1771#ifdef __U_BOOT__
1772                                flag_repeat = 0;
1773#endif
1774                                return 1;
1775                }
1776        }
1777        for (; pi; pi = (flag_restore != 0) ? rpipe : pi->next) {
1778                if (pi->r_mode == RES_WHILE || pi->r_mode == RES_UNTIL ||
1779                        pi->r_mode == RES_FOR) {
1780#ifdef __U_BOOT__
1781                                /* check Ctrl-C */
1782                                ctrlc();
1783                                if ((had_ctrlc())) {
1784                                        return 1;
1785                                }
1786#endif
1787                                flag_restore = 0;
1788                                if (!rpipe) {
1789                                        flag_rep = 0;
1790                                        rpipe = pi;
1791                                }
1792                }
1793                rmode = pi->r_mode;
1794                debug_printf("rmode=%d  if_code=%d  next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode);
1795                if (rmode == skip_more_in_this_rmode && flag_skip) {
1796                        if (pi->followup == PIPE_SEQ) flag_skip=0;
1797                        continue;
1798                }
1799                flag_skip = 1;
1800                skip_more_in_this_rmode = RES_XXXX;
1801                if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code;
1802                if (rmode == RES_THEN &&  if_code) continue;
1803                if (rmode == RES_ELSE && !if_code) continue;
1804                if (rmode == RES_ELIF && !if_code) break;
1805                if (rmode == RES_FOR && pi->num_progs) {
1806                        if (!list) {
1807                                /* if no variable values after "in" we skip "for" */
1808                                if (!pi->next->progs->argv) continue;
1809                                /* create list of variable values */
1810                                list = make_list_in(pi->next->progs->argv,
1811                                        pi->progs->argv[0]);
1812                                save_list = list;
1813                                save_name = pi->progs->argv[0];
1814                                pi->progs->argv[0] = NULL;
1815                                flag_rep = 1;
1816                        }
1817                        if (!(*list)) {
1818                                free(pi->progs->argv[0]);
1819                                free(save_list);
1820                                list = NULL;
1821                                flag_rep = 0;
1822                                pi->progs->argv[0] = save_name;
1823#ifndef __U_BOOT__
1824                                pi->progs->glob_result.gl_pathv[0] =
1825                                        pi->progs->argv[0];
1826#endif
1827                                continue;
1828                        } else {
1829                                /* insert new value from list for variable */
1830                                if (pi->progs->argv[0])
1831                                        free(pi->progs->argv[0]);
1832                                pi->progs->argv[0] = *list++;
1833#ifndef __U_BOOT__
1834                                pi->progs->glob_result.gl_pathv[0] =
1835                                        pi->progs->argv[0];
1836#endif
1837                        }
1838                }
1839                if (rmode == RES_IN) continue;
1840                if (rmode == RES_DO) {
1841                        if (!flag_rep) continue;
1842                }
1843                if ((rmode == RES_DONE)) {
1844                        if (flag_rep) {
1845                                flag_restore = 1;
1846                        } else {
1847                                rpipe = NULL;
1848                        }
1849                }
1850                if (pi->num_progs == 0) continue;
1851#ifndef __U_BOOT__
1852                save_num_progs = pi->num_progs; /* save number of programs */
1853#endif
1854                rcode = run_pipe_real(pi);
1855                debug_printf("run_pipe_real returned %d\n",rcode);
1856#ifndef __U_BOOT__
1857                if (rcode!=-1) {
1858                        /* We only ran a builtin: rcode was set by the return value
1859                         * of run_pipe_real(), and we don't need to wait for anything. */
1860                } else if (pi->followup==PIPE_BG) {
1861                        /* XXX check bash's behavior with nontrivial pipes */
1862                        /* XXX compute jobid */
1863                        /* XXX what does bash do with attempts to background builtins? */
1864                        insert_bg_job(pi);
1865                        rcode = EXIT_SUCCESS;
1866                } else {
1867                        if (interactive) {
1868                                /* move the new process group into the foreground */
1869                                if (tcsetpgrp(shell_terminal, pi->pgrp) && errno != ENOTTY)
1870                                        perror_msg("tcsetpgrp-3");
1871                                rcode = checkjobs(pi);
1872                                /* move the shell to the foreground */
1873                                if (tcsetpgrp(shell_terminal, getpgid(0)) && errno != ENOTTY)
1874                                        perror_msg("tcsetpgrp-4");
1875                        } else {
1876                                rcode = checkjobs(pi);
1877                        }
1878                        debug_printf("checkjobs returned %d\n",rcode);
1879                }
1880                last_return_code=rcode;
1881#else
1882                if (rcode < -1) {
1883                        last_return_code = -rcode - 2;
1884                        return -2;      /* exit */
1885                }
1886                last_return_code=(rcode == 0) ? 0 : 1;
1887#endif
1888#ifndef __U_BOOT__
1889                pi->num_progs = save_num_progs; /* restore number of programs */
1890#endif
1891                if ( rmode == RES_IF || rmode == RES_ELIF )
1892                        next_if_code=rcode;  /* can be overwritten a number of times */
1893                if (rmode == RES_WHILE)
1894                        flag_rep = !last_return_code;
1895                if (rmode == RES_UNTIL)
1896                        flag_rep = last_return_code;
1897                if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) ||
1898                     (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) )
1899                        skip_more_in_this_rmode=rmode;
1900#ifndef __U_BOOT__
1901                checkjobs(NULL);
1902#endif
1903        }
1904        return rcode;
1905}
1906
1907/* broken, of course, but OK for testing */
1908static char *indenter(int i)
1909{
1910        static char blanks[]="                                    ";
1911        return &blanks[sizeof(blanks)-i-1];
1912}
1913
1914/* return code is the exit status of the pipe */
1915static int free_pipe(struct pipe *pi, int indent)
1916{
1917        char **p;
1918        struct child_prog *child;
1919#ifndef __U_BOOT__
1920        struct redir_struct *r, *rnext;
1921#endif
1922        int a, i, ret_code=0;
1923        char *ind = indenter(indent);
1924
1925#ifndef __U_BOOT__
1926        if (pi->stopped_progs > 0)
1927                return ret_code;
1928        final_printf("%s run pipe: (pid %d)\n",ind,getpid());
1929#endif
1930        for (i=0; i<pi->num_progs; i++) {
1931                child = &pi->progs[i];
1932                final_printf("%s  command %d:\n",ind,i);
1933                if (child->argv) {
1934                        for (a=0,p=child->argv; *p; a++,p++) {
1935                                final_printf("%s   argv[%d] = %s\n",ind,a,*p);
1936                        }
1937#ifndef __U_BOOT__
1938                        globfree(&child->glob_result);
1939#else
1940                        for (a = 0; a < child->argc; a++) {
1941                                free(child->argv[a]);
1942                        }
1943                                        free(child->argv);
1944                        child->argc = 0;
1945#endif
1946                        child->argv=NULL;
1947                } else if (child->group) {
1948#ifndef __U_BOOT__
1949                        final_printf("%s   begin group (subshell:%d)\n",ind, child->subshell);
1950#endif
1951                        ret_code = free_pipe_list(child->group,indent+3);
1952                        final_printf("%s   end group\n",ind);
1953                } else {
1954                        final_printf("%s   (nil)\n",ind);
1955                }
1956#ifndef __U_BOOT__
1957                for (r=child->redirects; r; r=rnext) {
1958                        final_printf("%s   redirect %d%s", ind, r->fd, redir_table[r->type].descrip);
1959                        if (r->dup == -1) {
1960                                /* guard against the case >$FOO, where foo is unset or blank */
1961                                if (r->word.gl_pathv) {
1962                                        final_printf(" %s\n", *r->word.gl_pathv);
1963                                        globfree(&r->word);
1964                                }
1965                        } else {
1966                                final_printf("&%d\n", r->dup);
1967                        }
1968                        rnext=r->next;
1969                        free(r);
1970                }
1971                child->redirects=NULL;
1972#endif
1973        }
1974        free(pi->progs);   /* children are an array, they get freed all at once */
1975        pi->progs=NULL;
1976        return ret_code;
1977}
1978
1979static int free_pipe_list(struct pipe *head, int indent)
1980{
1981        int rcode=0;   /* if list has no members */
1982        struct pipe *pi, *next;
1983        char *ind = indenter(indent);
1984        for (pi=head; pi; pi=next) {
1985                final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode);
1986                rcode = free_pipe(pi, indent);
1987                final_printf("%s pipe followup code %d\n", ind, pi->followup);
1988                next=pi->next;
1989                pi->next=NULL;
1990                free(pi);
1991        }
1992        return rcode;
1993}
1994
1995/* Select which version we will use */
1996static int run_list(struct pipe *pi)
1997{
1998        int rcode=0;
1999#ifndef __U_BOOT__
2000        if (fake_mode==0) {
2001#endif
2002                rcode = run_list_real(pi);
2003#ifndef __U_BOOT__
2004        }
2005#endif
2006        /* free_pipe_list has the side effect of clearing memory
2007         * In the long run that function can be merged with run_list_real,
2008         * but doing that now would hobble the debugging effort. */
2009        free_pipe_list(pi,0);
2010        return rcode;
2011}
2012
2013/* The API for glob is arguably broken.  This routine pushes a non-matching
2014 * string into the output structure, removing non-backslashed backslashes.
2015 * If someone can prove me wrong, by performing this function within the
2016 * original glob(3) api, feel free to rewrite this routine into oblivion.
2017 * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
2018 * XXX broken if the last character is '\\', check that before calling.
2019 */
2020#ifndef __U_BOOT__
2021static int globhack(const char *src, int flags, glob_t *pglob)
2022{
2023        int cnt=0, pathc;
2024        const char *s;
2025        char *dest;
2026        for (cnt=1, s=src; s && *s; s++) {
2027                if (*s == '\\') s++;
2028                cnt++;
2029        }
2030        dest = malloc(cnt);
2031        if (!dest) return GLOB_NOSPACE;
2032        if (!(flags & GLOB_APPEND)) {
2033                pglob->gl_pathv=NULL;
2034                pglob->gl_pathc=0;
2035                pglob->gl_offs=0;
2036                pglob->gl_offs=0;
2037        }
2038        pathc = ++pglob->gl_pathc;
2039        pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv));
2040        if (pglob->gl_pathv == NULL) return GLOB_NOSPACE;
2041        pglob->gl_pathv[pathc-1]=dest;
2042        pglob->gl_pathv[pathc]=NULL;
2043        for (s=src; s && *s; s++, dest++) {
2044                if (*s == '\\') s++;
2045                *dest = *s;
2046        }
2047        *dest='\0';
2048        return 0;
2049}
2050
2051/* XXX broken if the last character is '\\', check that before calling */
2052static int glob_needed(const char *s)
2053{
2054        for (; *s; s++) {
2055                if (*s == '\\') s++;
2056                if (strchr("*[?",*s)) return 1;
2057        }
2058        return 0;
2059}
2060
2061#if 0
2062static void globprint(glob_t *pglob)
2063{
2064        int i;
2065        debug_printf("glob_t at %p:\n", pglob);
2066        debug_printf("  gl_pathc=%d  gl_pathv=%p  gl_offs=%d  gl_flags=%d\n",
2067                pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags);
2068        for (i=0; i<pglob->gl_pathc; i++)
2069                debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i,
2070                        pglob->gl_pathv[i], pglob->gl_pathv[i]);
2071}
2072#endif
2073
2074static int xglob(o_string *dest, int flags, glob_t *pglob)
2075{
2076        int gr;
2077
2078        /* short-circuit for null word */
2079        /* we can code this better when the debug_printf's are gone */
2080        if (dest->length == 0) {
2081                if (dest->nonnull) {
2082                        /* bash man page calls this an "explicit" null */
2083                        gr = globhack(dest->data, flags, pglob);
2084                        debug_printf("globhack returned %d\n",gr);
2085                } else {
2086                        return 0;
2087                }
2088        } else if (glob_needed(dest->data)) {
2089                gr = glob(dest->data, flags, NULL, pglob);
2090                debug_printf("glob returned %d\n",gr);
2091                if (gr == GLOB_NOMATCH) {
2092                        /* quote removal, or more accurately, backslash removal */
2093                        gr = globhack(dest->data, flags, pglob);
2094                        debug_printf("globhack returned %d\n",gr);
2095                }
2096        } else {
2097                gr = globhack(dest->data, flags, pglob);
2098                debug_printf("globhack returned %d\n",gr);
2099        }
2100        if (gr == GLOB_NOSPACE)
2101                error_msg_and_die("out of memory during glob");
2102        if (gr != 0) { /* GLOB_ABORTED ? */
2103                error_msg("glob(3) error %d",gr);
2104        }
2105        /* globprint(glob_target); */
2106        return gr;
2107}
2108#endif
2109
2110#ifdef __U_BOOT__
2111static char *get_dollar_var(char ch);
2112#endif
2113
2114/* This is used to get/check local shell variables */
2115char *get_local_var(const char *s)
2116{
2117        struct variables *cur;
2118
2119        if (!s)
2120                return NULL;
2121
2122#ifdef __U_BOOT__
2123        if (*s == '$')
2124                return get_dollar_var(s[1]);
2125#endif
2126
2127        for (cur = top_vars; cur; cur=cur->next)
2128                if(strcmp(cur->name, s)==0)
2129                        return cur->value;
2130        return NULL;
2131}
2132
2133/* This is used to set local shell variables
2134   flg_export==0 if only local (not exporting) variable
2135   flg_export==1 if "new" exporting environ
2136   flg_export>1  if current startup environ (not call putenv()) */
2137int set_local_var(const char *s, int flg_export)
2138{
2139        char *name, *value;
2140        int result=0;
2141        struct variables *cur;
2142
2143#ifdef __U_BOOT__
2144        /* might be possible! */
2145        if (!isalpha(*s))
2146                return -1;
2147#endif
2148
2149        name=strdup(s);
2150
2151#ifdef __U_BOOT__
2152        if (getenv(name) != NULL) {
2153                printf ("ERROR: "
2154                                "There is a global environment variable with the same name.\n");
2155                free(name);
2156                return -1;
2157        }
2158#endif
2159        /* Assume when we enter this function that we are already in
2160         * NAME=VALUE format.  So the first order of business is to
2161         * split 's' on the '=' into 'name' and 'value' */
2162        value = strchr(name, '=');
2163        if (value == NULL && ++value == NULL) {
2164                free(name);
2165                return -1;
2166        }
2167        *value++ = 0;
2168
2169        for(cur = top_vars; cur; cur = cur->next) {
2170                if(strcmp(cur->name, name)==0)
2171                        break;
2172        }
2173
2174        if(cur) {
2175                if(strcmp(cur->value, value)==0) {
2176                        if(flg_export>0 && cur->flg_export==0)
2177                                cur->flg_export=flg_export;
2178                        else
2179                                result++;
2180                } else {
2181                        if(cur->flg_read_only) {
2182                                error_msg("%s: readonly variable", name);
2183                                result = -1;
2184                        } else {
2185                                if(flg_export>0 || cur->flg_export>1)
2186                                        cur->flg_export=1;
2187                                free(cur->value);
2188
2189                                cur->value = strdup(value);
2190                        }
2191                }
2192        } else {
2193                cur = malloc(sizeof(struct variables));
2194                if(!cur) {
2195                        result = -1;
2196                } else {
2197                        cur->name = strdup(name);
2198                        if (cur->name == NULL) {
2199                                free(cur);
2200                                result = -1;
2201                        } else {
2202                                struct variables *bottom = top_vars;
2203                                cur->value = strdup(value);
2204                                cur->next = NULL;
2205                                cur->flg_export = flg_export;
2206                                cur->flg_read_only = 0;
2207                                while(bottom->next) bottom=bottom->next;
2208                                bottom->next = cur;
2209                        }
2210                }
2211        }
2212
2213#ifndef __U_BOOT__
2214        if(result==0 && cur->flg_export==1) {
2215                *(value-1) = '=';
2216                result = putenv(name);
2217        } else {
2218#endif
2219                free(name);
2220#ifndef __U_BOOT__
2221                if(result>0)            /* equivalent to previous set */
2222                        result = 0;
2223        }
2224#endif
2225        return result;
2226}
2227
2228void unset_local_var(const char *name)
2229{
2230        struct variables *cur;
2231
2232        if (name) {
2233                for (cur = top_vars; cur; cur=cur->next) {
2234                        if(strcmp(cur->name, name)==0)
2235                                break;
2236                }
2237                if (cur != NULL) {
2238                        struct variables *next = top_vars;
2239                        if(cur->flg_read_only) {
2240                                error_msg("%s: readonly variable", name);
2241                                return;
2242                        } else {
2243#ifndef __U_BOOT__
2244                                if(cur->flg_export)
2245                                        unsetenv(cur->name);
2246#endif
2247                                free(cur->name);
2248                                free(cur->value);
2249                                while (next->next != cur)
2250                                        next = next->next;
2251                                next->next = cur->next;
2252                        }
2253                        free(cur);
2254                }
2255        }
2256}
2257
2258static int is_assignment(const char *s)
2259{
2260        if (s == NULL)
2261                return 0;
2262
2263        if (!isalpha(*s)) return 0;
2264        ++s;
2265        while(isalnum(*s) || *s=='_') ++s;
2266        return *s=='=';
2267}
2268
2269#ifndef __U_BOOT__
2270/* the src parameter allows us to peek forward to a possible &n syntax
2271 * for file descriptor duplication, e.g., "2>&1".
2272 * Return code is 0 normally, 1 if a syntax error is detected in src.
2273 * Resource errors (in xmalloc) cause the process to exit */
2274static int setup_redirect(struct p_context *ctx, int fd, redir_type style,
2275        struct in_str *input)
2276{
2277        struct child_prog *child=ctx->child;
2278        struct redir_struct *redir = child->redirects;
2279        struct redir_struct *last_redir=NULL;
2280
2281        /* Create a new redir_struct and drop it onto the end of the linked list */
2282        while(redir) {
2283                last_redir=redir;
2284                redir=redir->next;
2285        }
2286        redir = xmalloc(sizeof(struct redir_struct));
2287        redir->next=NULL;
2288        redir->word.gl_pathv=NULL;
2289        if (last_redir) {
2290                last_redir->next=redir;
2291        } else {
2292                child->redirects=redir;
2293        }
2294
2295        redir->type=style;
2296        redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ;
2297
2298        debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip);
2299
2300        /* Check for a '2>&1' type redirect */
2301        redir->dup = redirect_dup_num(input);
2302        if (redir->dup == -2) return 1;  /* syntax error */
2303        if (redir->dup != -1) {
2304                /* Erik had a check here that the file descriptor in question
2305                 * is legit; I postpone that to "run time"
2306                 * A "-" representation of "close me" shows up as a -3 here */
2307                debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup);
2308        } else {
2309                /* We do _not_ try to open the file that src points to,
2310                 * since we need to return and let src be expanded first.
2311                 * Set ctx->pending_redirect, so we know what to do at the
2312                 * end of the next parsed word.
2313                 */
2314                ctx->pending_redirect = redir;
2315        }
2316        return 0;
2317}
2318#endif
2319
2320static struct pipe *new_pipe(void)
2321{
2322        struct pipe *pi;
2323        pi = xmalloc(sizeof(struct pipe));
2324        pi->num_progs = 0;
2325        pi->progs = NULL;
2326        pi->next = NULL;
2327        pi->followup = 0;  /* invalid */
2328        pi->r_mode = RES_NONE;
2329        return pi;
2330}
2331
2332static void initialize_context(struct p_context *ctx)
2333{
2334        ctx->pipe=NULL;
2335#ifndef __U_BOOT__
2336        ctx->pending_redirect=NULL;
2337#endif
2338        ctx->child=NULL;
2339        ctx->list_head=new_pipe();
2340        ctx->pipe=ctx->list_head;
2341        ctx->w=RES_NONE;
2342        ctx->stack=NULL;
2343#ifdef __U_BOOT__
2344        ctx->old_flag=0;
2345#endif
2346        done_command(ctx);   /* creates the memory for working child */
2347}
2348
2349/* normal return is 0
2350 * if a reserved word is found, and processed, return 1
2351 * should handle if, then, elif, else, fi, for, while, until, do, done.
2352 * case, function, and select are obnoxious, save those for later.
2353 */
2354struct reserved_combo {
2355        char *literal;
2356        int code;
2357        long flag;
2358};
2359/* Mostly a list of accepted follow-up reserved words.
2360 * FLAG_END means we are done with the sequence, and are ready
2361 * to turn the compound list into a command.
2362 * FLAG_START means the word must start a new compound list.
2363 */
2364static struct reserved_combo reserved_list[] = {
2365        { "if",    RES_IF,    FLAG_THEN | FLAG_START },
2366        { "then",  RES_THEN,  FLAG_ELIF | FLAG_ELSE | FLAG_FI },
2367        { "elif",  RES_ELIF,  FLAG_THEN },
2368        { "else",  RES_ELSE,  FLAG_FI   },
2369        { "fi",    RES_FI,    FLAG_END  },
2370        { "for",   RES_FOR,   FLAG_IN   | FLAG_START },
2371        { "while", RES_WHILE, FLAG_DO   | FLAG_START },
2372        { "until", RES_UNTIL, FLAG_DO   | FLAG_START },
2373        { "in",    RES_IN,    FLAG_DO   },
2374        { "do",    RES_DO,    FLAG_DONE },
2375        { "done",  RES_DONE,  FLAG_END  }
2376};
2377#define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
2378
2379static int reserved_word(o_string *dest, struct p_context *ctx)
2380{
2381        struct reserved_combo *r;
2382        for (r=reserved_list;
2383                r<reserved_list+NRES; r++) {
2384                if (strcmp(dest->data, r->literal) == 0) {
2385                        debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
2386                        if (r->flag & FLAG_START) {
2387                                struct p_context *new = xmalloc(sizeof(struct p_context));
2388                                debug_printf("push stack\n");
2389                                if (ctx->w == RES_IN || ctx->w == RES_FOR) {
2390                                        syntax();
2391                                        free(new);
2392                                        ctx->w = RES_SNTX;
2393                                        b_reset(dest);
2394                                        return 1;
2395                                }
2396                                *new = *ctx;   /* physical copy */
2397                                initialize_context(ctx);
2398                                ctx->stack=new;
2399                        } else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) {
2400                                syntax();
2401                                ctx->w = RES_SNTX;
2402                                b_reset(dest);
2403                                return 1;
2404                        }
2405                        ctx->w=r->code;
2406                        ctx->old_flag = r->flag;
2407                        if (ctx->old_flag & FLAG_END) {
2408                                struct p_context *old;
2409                                debug_printf("pop stack\n");
2410                                done_pipe(ctx,PIPE_SEQ);
2411                                old = ctx->stack;
2412                                old->child->group = ctx->list_head;
2413#ifndef __U_BOOT__
2414                                old->child->subshell = 0;
2415#endif
2416                                *ctx = *old;   /* physical copy */
2417                                free(old);
2418                        }
2419                        b_reset (dest);
2420                        return 1;
2421                }
2422        }
2423        return 0;
2424}
2425
2426/* normal return is 0.
2427 * Syntax or xglob errors return 1. */
2428static int done_word(o_string *dest, struct p_context *ctx)
2429{
2430        struct child_prog *child=ctx->child;
2431#ifndef __U_BOOT__
2432        glob_t *glob_target;
2433        int gr, flags = 0;
2434#else
2435        char *str, *s;
2436        int argc, cnt;
2437#endif
2438
2439        debug_printf("done_word: %s %p\n", dest->data, child);
2440        if (dest->length == 0 && !dest->nonnull) {
2441                debug_printf("  true null, ignored\n");
2442                return 0;
2443        }
2444#ifndef __U_BOOT__
2445        if (ctx->pending_redirect) {
2446                glob_target = &ctx->pending_redirect->word;
2447        } else {
2448#endif
2449                if (child->group) {
2450                        syntax();
2451                        return 1;  /* syntax error, groups and arglists don't mix */
2452                }
2453                if (!child->argv && (ctx->type & FLAG_PARSE_SEMICOLON)) {
2454                        debug_printf("checking %s for reserved-ness\n",dest->data);
2455                        if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX;
2456                }
2457#ifndef __U_BOOT__
2458                glob_target = &child->glob_result;
2459                if (child->argv) flags |= GLOB_APPEND;
2460#else
2461                for (cnt = 1, s = dest->data; s && *s; s++) {
2462                        if (*s == '\\') s++;
2463                        cnt++;
2464                }
2465                str = malloc(cnt);
2466                if (!str) return 1;
2467                if ( child->argv == NULL) {
2468                        child->argc=0;
2469                }
2470                argc = ++child->argc;
2471                child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv));
2472                if (child->argv == NULL) return 1;
2473                child->argv[argc-1]=str;
2474                child->argv[argc]=NULL;
2475                for (s = dest->data; s && *s; s++,str++) {
2476                        if (*s == '\\') s++;
2477                        *str = *s;
2478                }
2479                *str = '\0';
2480#endif
2481#ifndef __U_BOOT__
2482        }
2483        gr = xglob(dest, flags, glob_target);
2484        if (gr != 0) return 1;
2485#endif
2486
2487        b_reset(dest);
2488#ifndef __U_BOOT__
2489        if (ctx->pending_redirect) {
2490                ctx->pending_redirect=NULL;
2491                if (glob_target->gl_pathc != 1) {
2492                        error_msg("ambiguous redirect");
2493                        return 1;
2494                }
2495        } else {
2496                child->argv = glob_target->gl_pathv;
2497        }
2498#endif
2499        if (ctx->w == RES_FOR) {
2500                done_word(dest,ctx);
2501                done_pipe(ctx,PIPE_SEQ);
2502        }
2503        return 0;
2504}
2505
2506/* The only possible error here is out of memory, in which case
2507 * xmalloc exits. */
2508static int done_command(struct p_context *ctx)
2509{
2510        /* The child is really already in the pipe structure, so
2511         * advance the pipe counter and make a new, null child.
2512         * Only real trickiness here is that the uncommitted
2513         * child structure, to which ctx->child points, is not
2514         * counted in pi->num_progs. */
2515        struct pipe *pi=ctx->pipe;
2516        struct child_prog *prog=ctx->child;
2517
2518        if (prog && prog->group == NULL
2519                 && prog->argv == NULL
2520#ifndef __U_BOOT__
2521                 && prog->redirects == NULL) {
2522#else
2523                                                                                ) {
2524#endif
2525                debug_printf("done_command: skipping null command\n");
2526                return 0;
2527        } else if (prog) {
2528                pi->num_progs++;
2529                debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs);
2530        } else {
2531                debug_printf("done_command: initializing\n");
2532        }
2533        pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1));
2534
2535        prog = pi->progs + pi->num_progs;
2536#ifndef __U_BOOT__
2537        prog->redirects = NULL;
2538#endif
2539        prog->argv = NULL;
2540#ifndef __U_BOOT__
2541        prog->is_stopped = 0;
2542#endif
2543        prog->group = NULL;
2544#ifndef __U_BOOT__
2545        prog->glob_result.gl_pathv = NULL;
2546        prog->family = pi;
2547#endif
2548        prog->sp = 0;
2549        ctx->child = prog;
2550        prog->type = ctx->type;
2551
2552        /* but ctx->pipe and ctx->list_head remain unchanged */
2553        return 0;
2554}
2555
2556static int done_pipe(struct p_context *ctx, pipe_style type)
2557{
2558        struct pipe *new_p;
2559        done_command(ctx);  /* implicit closure of previous command */
2560        debug_printf("done_pipe, type %d\n", type);
2561        ctx->pipe->followup = type;
2562        ctx->pipe->r_mode = ctx->w;
2563        new_p=new_pipe();
2564        ctx->pipe->next = new_p;
2565        ctx->pipe = new_p;
2566        ctx->child = NULL;
2567        done_command(ctx);  /* set up new pipe to accept commands */
2568        return 0;
2569}
2570
2571#ifndef __U_BOOT__
2572/* peek ahead in the in_str to find out if we have a "&n" construct,
2573 * as in "2>&1", that represents duplicating a file descriptor.
2574 * returns either -2 (syntax error), -1 (no &), or the number found.
2575 */
2576static int redirect_dup_num(struct in_str *input)
2577{
2578        int ch, d=0, ok=0;
2579        ch = b_peek(input);
2580        if (ch != '&') return -1;
2581
2582        b_getch(input);  /* get the & */
2583        ch=b_peek(input);
2584        if (ch == '-') {
2585                b_getch(input);
2586                return -3;  /* "-" represents "close me" */
2587        }
2588        while (isdigit(ch)) {
2589                d = d*10+(ch-'0');
2590                ok=1;
2591                b_getch(input);
2592                ch = b_peek(input);
2593        }
2594        if (ok) return d;
2595
2596        error_msg("ambiguous redirect");
2597        return -2;
2598}
2599
2600/* If a redirect is immediately preceded by a number, that number is
2601 * supposed to tell which file descriptor to redirect.  This routine
2602 * looks for such preceding numbers.  In an ideal world this routine
2603 * needs to handle all the following classes of redirects...
2604 *     echo 2>foo     # redirects fd  2 to file "foo", nothing passed to echo
2605 *     echo 49>foo    # redirects fd 49 to file "foo", nothing passed to echo
2606 *     echo -2>foo    # redirects fd  1 to file "foo",    "-2" passed to echo
2607 *     echo 49x>foo   # redirects fd  1 to file "foo",   "49x" passed to echo
2608 * A -1 output from this program means no valid number was found, so the
2609 * caller should use the appropriate default for this redirection.
2610 */
2611static int redirect_opt_num(o_string *o)
2612{
2613        int num;
2614
2615        if (o->length==0) return -1;
2616        for(num=0; num<o->length; num++) {
2617                if (!isdigit(*(o->data+num))) {
2618                        return -1;
2619                }
2620        }
2621        /* reuse num (and save an int) */
2622        num=atoi(o->data);
2623        b_reset(o);
2624        return num;
2625}
2626
2627FILE *generate_stream_from_list(struct pipe *head)
2628{
2629        FILE *pf;
2630#if 1
2631        int pid, channel[2];
2632        if (pipe(channel)<0) perror_msg_and_die("pipe");
2633        pid=fork();
2634        if (pid<0) {
2635                perror_msg_and_die("fork");
2636        } else if (pid==0) {
2637                close(channel[0]);
2638                if (channel[1] != 1) {
2639                        dup2(channel[1],1);
2640                        close(channel[1]);
2641                }
2642#if 0
2643#define SURROGATE "surrogate response"
2644                write(1,SURROGATE,sizeof(SURROGATE));
2645                _exit(run_list(head));
2646#else
2647                _exit(run_list_real(head));   /* leaks memory */
2648#endif
2649        }
2650        debug_printf("forked child %d\n",pid);
2651        close(channel[1]);
2652        pf = fdopen(channel[0],"r");
2653        debug_printf("pipe on FILE *%p\n",pf);
2654#else
2655        free_pipe_list(head,0);
2656        pf=popen("echo surrogate response","r");
2657        debug_printf("started fake pipe on FILE *%p\n",pf);
2658#endif
2659        return pf;
2660}
2661
2662/* this version hacked for testing purposes */
2663/* return code is exit status of the process that is run. */
2664static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end)
2665{
2666        int retcode;
2667        o_string result=NULL_O_STRING;
2668        struct p_context inner;
2669        FILE *p;
2670        struct in_str pipe_str;
2671        initialize_context(&inner);
2672
2673        /* recursion to generate command */
2674        retcode = parse_stream(&result, &inner, input, subst_end);
2675        if (retcode != 0) return retcode;  /* syntax error or EOF */
2676        done_word(&result, &inner);
2677        done_pipe(&inner, PIPE_SEQ);
2678        b_free(&result);
2679
2680        p=generate_stream_from_list(inner.list_head);
2681        if (p==NULL) return 1;
2682        mark_open(fileno(p));
2683        setup_file_in_str(&pipe_str, p);
2684
2685        /* now send results of command back into original context */
2686        retcode = parse_stream(dest, ctx, &pipe_str, '\0');
2687        /* XXX In case of a syntax error, should we try to kill the child?
2688         * That would be tough to do right, so just read until EOF. */
2689        if (retcode == 1) {
2690                while (b_getch(&pipe_str)!=EOF) { /* discard */ };
2691        }
2692
2693        debug_printf("done reading from pipe, pclose()ing\n");
2694        /* This is the step that wait()s for the child.  Should be pretty
2695         * safe, since we just read an EOF from its stdout.  We could try
2696         * to better, by using wait(), and keeping track of background jobs
2697         * at the same time.  That would be a lot of work, and contrary
2698         * to the KISS philosophy of this program. */
2699        mark_closed(fileno(p));
2700        retcode=pclose(p);
2701        free_pipe_list(inner.list_head,0);
2702        debug_printf("pclosed, retcode=%d\n",retcode);
2703        /* XXX this process fails to trim a single trailing newline */
2704        return retcode;
2705}
2706
2707static int parse_group(o_string *dest, struct p_context *ctx,
2708        struct in_str *input, int ch)
2709{
2710        int rcode, endch=0;
2711        struct p_context sub;
2712        struct child_prog *child = ctx->child;
2713        if (child->argv) {
2714                syntax();
2715                return 1;  /* syntax error, groups and arglists don't mix */
2716        }
2717        initialize_context(&sub);
2718        switch(ch) {
2719                case '(': endch=')'; child->subshell=1; break;
2720                case '{': endch='}'; break;
2721                default: syntax();   /* really logic error */
2722        }
2723        rcode=parse_stream(dest,&sub,input,endch);
2724        done_word(dest,&sub); /* finish off the final word in the subcontext */
2725        done_pipe(&sub, PIPE_SEQ);  /* and the final command there, too */
2726        child->group = sub.list_head;
2727        return rcode;
2728        /* child remains "open", available for possible redirects */
2729}
2730#endif
2731
2732/* basically useful version until someone wants to get fancier,
2733 * see the bash man page under "Parameter Expansion" */
2734static char *lookup_param(char *src)
2735{
2736        char *p;
2737        char *sep;
2738        char *default_val = NULL;
2739        int assign = 0;
2740        int expand_empty = 0;
2741
2742        if (!src)
2743                return NULL;
2744
2745        sep = strchr(src, ':');
2746
2747        if (sep) {
2748                *sep = '\0';
2749                if (*(sep + 1) == '-')
2750                        default_val = sep+2;
2751                if (*(sep + 1) == '=') {
2752                        default_val = sep+2;
2753                        assign = 1;
2754                }
2755                if (*(sep + 1) == '+') {
2756                        default_val = sep+2;
2757                        expand_empty = 1;
2758                }
2759        }
2760
2761        p = getenv(src);
2762        if (!p)
2763                p = get_local_var(src);
2764
2765        if (!p || strlen(p) == 0) {
2766                p = default_val;
2767                if (assign) {
2768                        char *var = malloc(strlen(src)+strlen(default_val)+2);
2769                        if (var) {
2770                                sprintf(var, "%s=%s", src, default_val);
2771                                set_local_var(var, 0);
2772                        }
2773                        free(var);
2774                }
2775        } else if (expand_empty) {
2776                p += strlen(p);
2777        }
2778
2779        if (sep)
2780                *sep = ':';
2781
2782        return p;
2783}
2784
2785#ifdef __U_BOOT__
2786static char *get_dollar_var(char ch)
2787{
2788        static char buf[40];
2789
2790        buf[0] = '\0';
2791        switch (ch) {
2792                case '?':
2793                        sprintf(buf, "%u", (unsigned int)last_return_code);
2794                        break;
2795                default:
2796                        return NULL;
2797        }
2798        return buf;
2799}
2800#endif
2801
2802/* return code: 0 for OK, 1 for syntax error */
2803static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input)
2804{
2805#ifndef __U_BOOT__
2806        int i, advance=0;
2807#else
2808        int advance=0;
2809#endif
2810#ifndef __U_BOOT__
2811        char sep[]=" ";
2812#endif
2813        int ch = input->peek(input);  /* first character after the $ */
2814        debug_printf("handle_dollar: ch=%c\n",ch);
2815        if (isalpha(ch)) {
2816                b_addchr(dest, SPECIAL_VAR_SYMBOL);
2817                ctx->child->sp++;
2818                while(ch=b_peek(input),isalnum(ch) || ch=='_') {
2819                        b_getch(input);
2820                        b_addchr(dest,ch);
2821                }
2822                b_addchr(dest, SPECIAL_VAR_SYMBOL);
2823#ifndef __U_BOOT__
2824        } else if (isdigit(ch)) {
2825                i = ch-'0';  /* XXX is $0 special? */
2826                if (i<global_argc) {
2827                        parse_string(dest, ctx, global_argv[i]); /* recursion */
2828                }
2829                advance = 1;
2830#endif
2831        } else switch (ch) {
2832#ifndef __U_BOOT__
2833                case '$':
2834                        b_adduint(dest,getpid());
2835                        advance = 1;
2836                        break;
2837                case '!':
2838                        if (last_bg_pid > 0) b_adduint(dest, last_bg_pid);
2839                        advance = 1;
2840                        break;
2841#endif
2842                case '?':
2843#ifndef __U_BOOT__
2844                        b_adduint(dest,last_return_code);
2845#else
2846                        ctx->child->sp++;
2847                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2848                        b_addchr(dest, '$');
2849                        b_addchr(dest, '?');
2850                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2851#endif
2852                        advance = 1;
2853                        break;
2854#ifndef __U_BOOT__
2855                case '#':
2856                        b_adduint(dest,global_argc ? global_argc-1 : 0);
2857                        advance = 1;
2858                        break;
2859#endif
2860                case '{':
2861                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2862                        ctx->child->sp++;
2863                        b_getch(input);
2864                        /* XXX maybe someone will try to escape the '}' */
2865                        while(ch=b_getch(input),ch!=EOF && ch!='}') {
2866                                b_addchr(dest,ch);
2867                        }
2868                        if (ch != '}') {
2869                                syntax();
2870                                return 1;
2871                        }
2872                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2873                        break;
2874#ifndef __U_BOOT__
2875                case '(':
2876                        b_getch(input);
2877                        process_command_subs(dest, ctx, input, ')');
2878                        break;
2879                case '*':
2880                        sep[0]=ifs[0];
2881                        for (i=1; i<global_argc; i++) {
2882                                parse_string(dest, ctx, global_argv[i]);
2883                                if (i+1 < global_argc) parse_string(dest, ctx, sep);
2884                        }
2885                        break;
2886                case '@':
2887                case '-':
2888                case '_':
2889                        /* still unhandled, but should be eventually */
2890                        error_msg("unhandled syntax: $%c",ch);
2891                        return 1;
2892                        break;
2893#endif
2894                default:
2895                        b_addqchr(dest,'$',dest->quote);
2896        }
2897        /* Eat the character if the flag was set.  If the compiler
2898         * is smart enough, we could substitute "b_getch(input);"
2899         * for all the "advance = 1;" above, and also end up with
2900         * a nice size-optimized program.  Hah!  That'll be the day.
2901         */
2902        if (advance) b_getch(input);
2903        return 0;
2904}
2905
2906#ifndef __U_BOOT__
2907int parse_string(o_string *dest, struct p_context *ctx, const char *src)
2908{
2909        struct in_str foo;
2910        setup_string_in_str(&foo, src);
2911        return parse_stream(dest, ctx, &foo, '\0');
2912}
2913#endif
2914
2915/* return code is 0 for normal exit, 1 for syntax error */
2916static int parse_stream(o_string *dest, struct p_context *ctx,
2917                        struct in_str *input, int end_trigger)
2918{
2919        unsigned int ch, m;
2920#ifndef __U_BOOT__
2921        int redir_fd;
2922        redir_type redir_style;
2923#endif
2924        int next;
2925
2926        /* Only double-quote state is handled in the state variable dest->quote.
2927         * A single-quote triggers a bypass of the main loop until its mate is
2928         * found.  When recursing, quote state is passed in via dest->quote. */
2929
2930        debug_printf("parse_stream, end_trigger=%d\n",end_trigger);
2931        while ((ch=b_getch(input))!=EOF) {
2932                m = map[ch];
2933#ifdef __U_BOOT__
2934                if (input->__promptme == 0) return 1;
2935#endif
2936                next = (ch == '\n') ? 0 : b_peek(input);
2937
2938                debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d - %c\n",
2939                        ch >= ' ' ? ch : '.', ch, m,
2940                        dest->quote, ctx->stack == NULL ? '*' : '.');
2941
2942                if (m==0 || ((m==1 || m==2) && dest->quote)) {
2943                        b_addqchr(dest, ch, dest->quote);
2944                } else {
2945                        if (m==2) {  /* unquoted IFS */
2946                                if (done_word(dest, ctx)) {
2947                                        return 1;
2948                                }
2949                                /* If we aren't performing a substitution, treat a newline as a
2950                                 * command separator.  */
2951                                if (end_trigger != '\0' && ch=='\n')
2952                                        done_pipe(ctx,PIPE_SEQ);
2953                        }
2954                        if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) {
2955                                debug_printf("leaving parse_stream (triggered)\n");
2956                                return 0;
2957                        }
2958#if 0
2959                        if (ch=='\n') {
2960                                /* Yahoo!  Time to run with it! */
2961                                done_pipe(ctx,PIPE_SEQ);
2962                                run_list(ctx->list_head);
2963                                initialize_context(ctx);
2964                        }
2965#endif
2966                        if (m!=2) switch (ch) {
2967                case '#':
2968                        if (dest->length == 0 && !dest->quote) {
2969                                while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); }
2970                        } else {
2971                                b_addqchr(dest, ch, dest->quote);
2972                        }
2973                        break;
2974                case '\\':
2975                        if (next == EOF) {
2976                                syntax();
2977                                return 1;
2978                        }
2979                        b_addqchr(dest, '\\', dest->quote);
2980                        b_addqchr(dest, b_getch(input), dest->quote);
2981                        break;
2982                case '$':
2983                        if (handle_dollar(dest, ctx, input)!=0) return 1;
2984                        break;
2985                case '\'':
2986                        dest->nonnull = 1;
2987                        while(ch=b_getch(input),ch!=EOF && ch!='\'') {
2988#ifdef __U_BOOT__
2989                                if(input->__promptme == 0) return 1;
2990#endif
2991                                b_addchr(dest,ch);
2992                        }
2993                        if (ch==EOF) {
2994                                syntax();
2995                                return 1;
2996                        }
2997                        break;
2998                case '"':
2999                        dest->nonnull = 1;
3000                        dest->quote = !dest->quote;
3001                        break;
3002#ifndef __U_BOOT__
3003                case '`':
3004                        process_command_subs(dest, ctx, input, '`');
3005                        break;
3006                case '>':
3007                        redir_fd = redirect_opt_num(dest);
3008                        done_word(dest, ctx);
3009                        redir_style=REDIRECT_OVERWRITE;
3010                        if (next == '>') {
3011                                redir_style=REDIRECT_APPEND;
3012                                b_getch(input);
3013                        } else if (next == '(') {
3014                                syntax();   /* until we support >(list) Process Substitution */
3015                                return 1;
3016                        }
3017                        setup_redirect(ctx, redir_fd, redir_style, input);
3018                        break;
3019                case '<':
3020                        redir_fd = redirect_opt_num(dest);
3021                        done_word(dest, ctx);
3022                        redir_style=REDIRECT_INPUT;
3023                        if (next == '<') {
3024                                redir_style=REDIRECT_HEREIS;
3025                                b_getch(input);
3026                        } else if (next == '>') {
3027                                redir_style=REDIRECT_IO;
3028                                b_getch(input);
3029                        } else if (next == '(') {
3030                                syntax();   /* until we support <(list) Process Substitution */
3031                                return 1;
3032                        }
3033                        setup_redirect(ctx, redir_fd, redir_style, input);
3034                        break;
3035#endif
3036                case ';':
3037                        done_word(dest, ctx);
3038                        done_pipe(ctx,PIPE_SEQ);
3039                        break;
3040                case '&':
3041                        done_word(dest, ctx);
3042                        if (next=='&') {
3043                                b_getch(input);
3044                                done_pipe(ctx,PIPE_AND);
3045                        } else {
3046#ifndef __U_BOOT__
3047                                done_pipe(ctx,PIPE_BG);
3048#else
3049                                syntax_err();
3050                                return 1;
3051#endif
3052                        }
3053                        break;
3054                case '|':
3055                        done_word(dest, ctx);
3056                        if (next=='|') {
3057                                b_getch(input);
3058                                done_pipe(ctx,PIPE_OR);
3059                        } else {
3060                                /* we could pick up a file descriptor choice here
3061                                 * with redirect_opt_num(), but bash doesn't do it.
3062                                 * "echo foo 2| cat" yields "foo 2". */
3063#ifndef __U_BOOT__
3064                                done_command(ctx);
3065#else
3066                                syntax_err();
3067                                return 1;
3068#endif
3069                        }
3070                        break;
3071#ifndef __U_BOOT__
3072                case '(':
3073                case '{':
3074                        if (parse_group(dest, ctx, input, ch)!=0) return 1;
3075                        break;
3076                case ')':
3077                case '}':
3078                        syntax();   /* Proper use of this character caught by end_trigger */
3079                        return 1;
3080                        break;
3081#endif
3082                case SUBSTED_VAR_SYMBOL:
3083                        dest->nonnull = 1;
3084                        while (ch = b_getch(input), ch != EOF &&
3085                            ch != SUBSTED_VAR_SYMBOL) {
3086                                debug_printf("subst, pass=%d\n", ch);
3087                                if (input->__promptme == 0)
3088                                        return 1;
3089                                b_addchr(dest, ch);
3090                        }
3091                        debug_printf("subst, term=%d\n", ch);
3092                        if (ch == EOF) {
3093                                syntax();
3094                                return 1;
3095                        }
3096                        break;
3097                default:
3098                        syntax();   /* this is really an internal logic error */
3099                        return 1;
3100                        }
3101                }
3102        }
3103        /* complain if quote?  No, maybe we just finished a command substitution
3104         * that was quoted.  Example:
3105         * $ echo "`cat foo` plus more"
3106         * and we just got the EOF generated by the subshell that ran "cat foo"
3107         * The only real complaint is if we got an EOF when end_trigger != '\0',
3108         * that is, we were really supposed to get end_trigger, and never got
3109         * one before the EOF.  Can't use the standard "syntax error" return code,
3110         * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
3111        debug_printf("leaving parse_stream (EOF)\n");
3112        if (end_trigger != '\0') return -1;
3113        return 0;
3114}
3115
3116static void mapset(const unsigned char *set, int code)
3117{
3118        const unsigned char *s;
3119        for (s=set; *s; s++) map[*s] = code;
3120}
3121
3122static void update_ifs_map(void)
3123{
3124        /* char *ifs and char map[256] are both globals. */
3125        ifs = (uchar *)getenv("IFS");
3126        if (ifs == NULL) ifs=(uchar *)" \t\n";
3127        /* Precompute a list of 'flow through' behavior so it can be treated
3128         * quickly up front.  Computation is necessary because of IFS.
3129         * Special case handling of IFS == " \t\n" is not implemented.
3130         * The map[] array only really needs two bits each, and on most machines
3131         * that would be faster because of the reduced L1 cache footprint.
3132         */
3133        memset(map,0,sizeof(map)); /* most characters flow through always */
3134#ifndef __U_BOOT__
3135        mapset((uchar *)"\\$'\"`", 3);      /* never flow through */
3136        mapset((uchar *)"<>;&|(){}#", 1);   /* flow through if quoted */
3137#else
3138        {
3139                uchar subst[2] = {SUBSTED_VAR_SYMBOL, 0};
3140                mapset(subst, 3);       /* never flow through */
3141        }
3142        mapset((uchar *)"\\$'\"", 3);       /* never flow through */
3143        mapset((uchar *)";&|#", 1);         /* flow through if quoted */
3144#endif
3145        mapset(ifs, 2);            /* also flow through if quoted */
3146}
3147
3148/* most recursion does not come through here, the exeception is
3149 * from builtin_source() */
3150static int parse_stream_outer(struct in_str *inp, int flag)
3151{
3152
3153        struct p_context ctx;
3154        o_string temp=NULL_O_STRING;
3155        int rcode;
3156#ifdef __U_BOOT__
3157        int code = 0;
3158#endif
3159        do {
3160                ctx.type = flag;
3161                initialize_context(&ctx);
3162                update_ifs_map();
3163                if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset((uchar *)";$&|", 0);
3164                inp->promptmode=1;
3165                rcode = parse_stream(&temp, &ctx, inp, '\n');
3166#ifdef __U_BOOT__
3167                if (rcode == 1) flag_repeat = 0;
3168#endif
3169                if (rcode != 1 && ctx.old_flag != 0) {
3170                        syntax();
3171#ifdef __U_BOOT__
3172                        flag_repeat = 0;
3173#endif
3174                }
3175                if (rcode != 1 && ctx.old_flag == 0) {
3176                        done_word(&temp, &ctx);
3177                        done_pipe(&ctx,PIPE_SEQ);
3178#ifndef __U_BOOT__
3179                        run_list(ctx.list_head);
3180#else
3181                        code = run_list(ctx.list_head);
3182                        if (code == -2) {       /* exit */
3183                                b_free(&temp);
3184                                code = 0;
3185                                /* XXX hackish way to not allow exit from main loop */
3186                                if (inp->peek == file_peek) {
3187                                        printf("exit not allowed from main input shell.\n");
3188                                        continue;
3189                                }
3190                                break;
3191                        }
3192                        if (code == -1)
3193                            flag_repeat = 0;
3194#endif
3195                } else {
3196                        if (ctx.old_flag != 0) {
3197                                free(ctx.stack);
3198                                b_reset(&temp);
3199                        }
3200#ifdef __U_BOOT__
3201                        if (inp->__promptme == 0) printf("<INTERRUPT>\n");
3202                        inp->__promptme = 1;
3203#endif
3204                        temp.nonnull = 0;
3205                        temp.quote = 0;
3206                        inp->p = NULL;
3207                        free_pipe_list(ctx.list_head,0);
3208                }
3209                b_free(&temp);
3210        } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP));   /* loop on syntax errors, return on EOF */
3211#ifndef __U_BOOT__
3212        return 0;
3213#else
3214        return (code != 0) ? 1 : 0;
3215#endif /* __U_BOOT__ */
3216}
3217
3218#ifndef __U_BOOT__
3219static int parse_string_outer(const char *s, int flag)
3220#else
3221int parse_string_outer(const char *s, int flag)
3222#endif  /* __U_BOOT__ */
3223{
3224        struct in_str input;
3225#ifdef __U_BOOT__
3226        char *p = NULL;
3227        int rcode;
3228        if ( !s || !*s)
3229                return 1;
3230        if (!(p = strchr(s, '\n')) || *++p) {
3231                p = xmalloc(strlen(s) + 2);
3232                strcpy(p, s);
3233                strcat(p, "\n");
3234                setup_string_in_str(&input, p);
3235                rcode = parse_stream_outer(&input, flag);
3236                free(p);
3237                return rcode;
3238        } else {
3239#endif
3240        setup_string_in_str(&input, s);
3241        return parse_stream_outer(&input, flag);
3242#ifdef __U_BOOT__
3243        }
3244#endif
3245}
3246
3247#ifndef __U_BOOT__
3248static int parse_file_outer(FILE *f)
3249#else
3250int parse_file_outer(void)
3251#endif
3252{
3253        int rcode;
3254        struct in_str input;
3255#ifndef __U_BOOT__
3256        setup_file_in_str(&input, f);
3257#else
3258        setup_file_in_str(&input);
3259#endif
3260        rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON);
3261        return rcode;
3262}
3263
3264#ifdef __U_BOOT__
3265#ifdef CONFIG_NEEDS_MANUAL_RELOC
3266static void u_boot_hush_reloc(void)
3267{
3268        unsigned long addr;
3269        struct reserved_combo *r;
3270
3271        for (r=reserved_list; r<reserved_list+NRES; r++) {
3272                addr = (ulong) (r->literal) + gd->reloc_off;
3273                r->literal = (char *)addr;
3274        }
3275}
3276#endif
3277
3278int u_boot_hush_start(void)
3279{
3280        if (top_vars == NULL) {
3281                top_vars = malloc(sizeof(struct variables));
3282                top_vars->name = "HUSH_VERSION";
3283                top_vars->value = "0.01";
3284                top_vars->next = NULL;
3285                top_vars->flg_export = 0;
3286                top_vars->flg_read_only = 1;
3287#ifdef CONFIG_NEEDS_MANUAL_RELOC
3288                u_boot_hush_reloc();
3289#endif
3290        }
3291        return 0;
3292}
3293
3294static void *xmalloc(size_t size)
3295{
3296        void *p = NULL;
3297
3298        if (!(p = malloc(size))) {
3299            printf("ERROR : memory not allocated\n");
3300            for(;;);
3301        }
3302        return p;
3303}
3304
3305static void *xrealloc(void *ptr, size_t size)
3306{
3307        void *p = NULL;
3308
3309        if (!(p = realloc(ptr, size))) {
3310            printf("ERROR : memory not allocated\n");
3311            for(;;);
3312        }
3313        return p;
3314}
3315#endif /* __U_BOOT__ */
3316
3317#ifndef __U_BOOT__
3318/* Make sure we have a controlling tty.  If we get started under a job
3319 * aware app (like bash for example), make sure we are now in charge so
3320 * we don't fight over who gets the foreground */
3321static void setup_job_control(void)
3322{
3323        static pid_t shell_pgrp;
3324        /* Loop until we are in the foreground.  */
3325        while (tcgetpgrp (shell_terminal) != (shell_pgrp = getpgrp ()))
3326                kill (- shell_pgrp, SIGTTIN);
3327
3328        /* Ignore interactive and job-control signals.  */
3329        signal(SIGINT, SIG_IGN);
3330        signal(SIGQUIT, SIG_IGN);
3331        signal(SIGTERM, SIG_IGN);
3332        signal(SIGTSTP, SIG_IGN);
3333        signal(SIGTTIN, SIG_IGN);
3334        signal(SIGTTOU, SIG_IGN);
3335        signal(SIGCHLD, SIG_IGN);
3336
3337        /* Put ourselves in our own process group.  */
3338        setsid();
3339        shell_pgrp = getpid ();
3340        setpgid (shell_pgrp, shell_pgrp);
3341
3342        /* Grab control of the terminal.  */
3343        tcsetpgrp(shell_terminal, shell_pgrp);
3344}
3345
3346int hush_main(int argc, char * const *argv)
3347{
3348        int opt;
3349        FILE *input;
3350        char **e = environ;
3351
3352        /* XXX what should these be while sourcing /etc/profile? */
3353        global_argc = argc;
3354        global_argv = argv;
3355
3356        /* (re?) initialize globals.  Sometimes hush_main() ends up calling
3357         * hush_main(), therefore we cannot rely on the BSS to zero out this
3358         * stuff.  Reset these to 0 every time. */
3359        ifs = NULL;
3360        /* map[] is taken care of with call to update_ifs_map() */
3361        fake_mode = 0;
3362        interactive = 0;
3363        close_me_head = NULL;
3364        last_bg_pid = 0;
3365        job_list = NULL;
3366        last_jobid = 0;
3367
3368        /* Initialize some more globals to non-zero values */
3369        set_cwd();
3370#ifdef CONFIG_FEATURE_COMMAND_EDITING
3371        cmdedit_set_initial_prompt();
3372#else
3373        PS1 = NULL;
3374#endif
3375        PS2 = "> ";
3376
3377        /* initialize our shell local variables with the values
3378         * currently living in the environment */
3379        if (e) {
3380                for (; *e; e++)
3381                        set_local_var(*e, 2);   /* without call putenv() */
3382        }
3383
3384        last_return_code=EXIT_SUCCESS;
3385
3386
3387        if (argv[0] && argv[0][0] == '-') {
3388                debug_printf("\nsourcing /etc/profile\n");
3389                if ((input = fopen("/etc/profile", "r")) != NULL) {
3390                        mark_open(fileno(input));
3391                        parse_file_outer(input);
3392                        mark_closed(fileno(input));
3393                        fclose(input);
3394                }
3395        }
3396        input=stdin;
3397
3398        while ((opt = getopt(argc, argv, "c:xif")) > 0) {
3399                switch (opt) {
3400                        case 'c':
3401                                {
3402                                        global_argv = argv+optind;
3403                                        global_argc = argc-optind;
3404                                        opt = parse_string_outer(optarg, FLAG_PARSE_SEMICOLON);
3405                                        goto final_return;
3406                                }
3407                                break;
3408                        case 'i':
3409                                interactive++;
3410                                break;
3411                        case 'f':
3412                                fake_mode++;
3413                                break;
3414                        default:
3415#ifndef BB_VER
3416                                fprintf(stderr, "Usage: sh [FILE]...\n"
3417                                                "   or: sh -c command [args]...\n\n");
3418                                exit(EXIT_FAILURE);
3419#else
3420                                show_usage();
3421#endif
3422                }
3423        }
3424        /* A shell is interactive if the `-i' flag was given, or if all of
3425         * the following conditions are met:
3426         *        no -c command
3427         *    no arguments remaining or the -s flag given
3428         *    standard input is a terminal
3429         *    standard output is a terminal
3430         *    Refer to Posix.2, the description of the `sh' utility. */
3431        if (argv[optind]==NULL && input==stdin &&
3432                        isatty(fileno(stdin)) && isatty(fileno(stdout))) {
3433                interactive++;
3434        }
3435
3436        debug_printf("\ninteractive=%d\n", interactive);
3437        if (interactive) {
3438                /* Looks like they want an interactive shell */
3439#ifndef CONFIG_FEATURE_SH_EXTRA_QUIET
3440                printf( "\n\n" BB_BANNER " hush - the humble shell v0.01 (testing)\n");
3441                printf( "Enter 'help' for a list of built-in commands.\n\n");
3442#endif
3443                setup_job_control();
3444        }
3445
3446        if (argv[optind]==NULL) {
3447                opt=parse_file_outer(stdin);
3448                goto final_return;
3449        }
3450
3451        debug_printf("\nrunning script '%s'\n", argv[optind]);
3452        global_argv = argv+optind;
3453        global_argc = argc-optind;
3454        input = xfopen(argv[optind], "r");
3455        opt = parse_file_outer(input);
3456
3457#ifdef CONFIG_FEATURE_CLEAN_UP
3458        fclose(input);
3459        if (cwd && cwd != unknown)
3460                free((char*)cwd);
3461        {
3462                struct variables *cur, *tmp;
3463                for(cur = top_vars; cur; cur = tmp) {
3464                        tmp = cur->next;
3465                        if (!cur->flg_read_only) {
3466                                free(cur->name);
3467                                free(cur->value);
3468                                free(cur);
3469                        }
3470                }
3471        }
3472#endif
3473
3474final_return:
3475        return(opt?opt:last_return_code);
3476}
3477#endif
3478
3479static char *insert_var_value(char *inp)
3480{
3481        return insert_var_value_sub(inp, 0);
3482}
3483
3484static char *insert_var_value_sub(char *inp, int tag_subst)
3485{
3486        int res_str_len = 0;
3487        int len;
3488        int done = 0;
3489        char *p, *p1, *res_str = NULL;
3490
3491        while ((p = strchr(inp, SPECIAL_VAR_SYMBOL))) {
3492                /* check the beginning of the string for normal charachters */
3493                if (p != inp) {
3494                        /* copy any charachters to the result string */
3495                        len = p - inp;
3496                        res_str = xrealloc(res_str, (res_str_len + len));
3497                        strncpy((res_str + res_str_len), inp, len);
3498                        res_str_len += len;
3499                }
3500                inp = ++p;
3501                /* find the ending marker */
3502                p = strchr(inp, SPECIAL_VAR_SYMBOL);
3503                *p = '\0';
3504                /* look up the value to substitute */
3505                if ((p1 = lookup_param(inp))) {
3506                        if (tag_subst)
3507                                len = res_str_len + strlen(p1) + 2;
3508                        else
3509                                len = res_str_len + strlen(p1);
3510                        res_str = xrealloc(res_str, (1 + len));
3511                        if (tag_subst) {
3512                                /*
3513                                 * copy the variable value to the result
3514                                 * string
3515                                 */
3516                                strcpy((res_str + res_str_len + 1), p1);
3517
3518                                /*
3519                                 * mark the replaced text to be accepted as
3520                                 * is
3521                                 */
3522                                res_str[res_str_len] = SUBSTED_VAR_SYMBOL;
3523                                res_str[res_str_len + 1 + strlen(p1)] =
3524                                        SUBSTED_VAR_SYMBOL;
3525                        } else
3526                                /*
3527                                 * copy the variable value to the result
3528                                 * string
3529                                 */
3530                                strcpy((res_str + res_str_len), p1);
3531
3532                        res_str_len = len;
3533                }
3534                *p = SPECIAL_VAR_SYMBOL;
3535                inp = ++p;
3536                done = 1;
3537        }
3538        if (done) {
3539                res_str = xrealloc(res_str, (1 + res_str_len + strlen(inp)));
3540                strcpy((res_str + res_str_len), inp);
3541                while ((p = strchr(res_str, '\n'))) {
3542                        *p = ' ';
3543                }
3544        }
3545        return (res_str == NULL) ? inp : res_str;
3546}
3547
3548static char **make_list_in(char **inp, char *name)
3549{
3550        int len, i;
3551        int name_len = strlen(name);
3552        int n = 0;
3553        char **list;
3554        char *p1, *p2, *p3;
3555
3556        /* create list of variable values */
3557        list = xmalloc(sizeof(*list));
3558        for (i = 0; inp[i]; i++) {
3559                p3 = insert_var_value(inp[i]);
3560                p1 = p3;
3561                while (*p1) {
3562                        if ((*p1 == ' ')) {
3563                                p1++;
3564                                continue;
3565                        }
3566                        if ((p2 = strchr(p1, ' '))) {
3567                                len = p2 - p1;
3568                        } else {
3569                                len = strlen(p1);
3570                                p2 = p1 + len;
3571                        }
3572                        /* we use n + 2 in realloc for list,because we add
3573                         * new element and then we will add NULL element */
3574                        list = xrealloc(list, sizeof(*list) * (n + 2));
3575                        list[n] = xmalloc(2 + name_len + len);
3576                        strcpy(list[n], name);
3577                        strcat(list[n], "=");
3578                        strncat(list[n], p1, len);
3579                        list[n++][name_len + len + 1] = '\0';
3580                        p1 = p2;
3581                }
3582                if (p3 != inp[i]) free(p3);
3583        }
3584        list[n] = NULL;
3585        return list;
3586}
3587
3588/* Make new string for parser */
3589static char * make_string(char ** inp)
3590{
3591        char *p;
3592        char *str = NULL;
3593        int n;
3594        int len = 2;
3595        char *noeval_str;
3596        int noeval = 0;
3597
3598        noeval_str = get_local_var("HUSH_NO_EVAL");
3599        if (noeval_str != NULL && *noeval_str != '0' && *noeval_str != '\0')
3600                noeval = 1;
3601        for (n = 0; inp[n]; n++) {
3602                p = insert_var_value_sub(inp[n], noeval);
3603                str = xrealloc(str, (len + strlen(p)));
3604                if (n) {
3605                        strcat(str, " ");
3606                } else {
3607                        *str = '\0';
3608                }
3609                strcat(str, p);
3610                len = strlen(str) + 3;
3611                if (p != inp[n]) free(p);
3612        }
3613        len = strlen(str);
3614        *(str + len) = '\n';
3615        *(str + len + 1) = '\0';
3616        return str;
3617}
3618
3619#ifdef __U_BOOT__
3620static int do_showvar(cmd_tbl_t *cmdtp, int flag, int argc,
3621                      char * const argv[])
3622{
3623        int i, k;
3624        int rcode = 0;
3625        struct variables *cur;
3626
3627        if (argc == 1) {                /* Print all env variables      */
3628                for (cur = top_vars; cur; cur = cur->next) {
3629                        printf ("%s=%s\n", cur->name, cur->value);
3630                        if (ctrlc ()) {
3631                                puts ("\n ** Abort\n");
3632                                return 1;
3633                        }
3634                }
3635                return 0;
3636        }
3637        for (i = 1; i < argc; ++i) {    /* print single env variables   */
3638                char *name = argv[i];
3639
3640                k = -1;
3641                for (cur = top_vars; cur; cur = cur->next) {
3642                        if(strcmp (cur->name, name) == 0) {
3643                                k = 0;
3644                                printf ("%s=%s\n", cur->name, cur->value);
3645                        }
3646                        if (ctrlc ()) {
3647                                puts ("\n ** Abort\n");
3648                                return 1;
3649                        }
3650                }
3651                if (k < 0) {
3652                        printf ("## Error: \"%s\" not defined\n", name);
3653                        rcode ++;
3654                }
3655        }
3656        return rcode;
3657}
3658
3659U_BOOT_CMD(
3660        showvar, CONFIG_SYS_MAXARGS, 1, do_showvar,
3661        "print local hushshell variables",
3662        "\n    - print values of all hushshell variables\n"
3663        "showvar name ...\n"
3664        "    - print value of hushshell variable 'name'"
3665);
3666
3667#endif
3668/****************************************************************************/
3669