uboot/board/freescale/bsc9132qds/ddr.c
<<
>>
Prefs
   1/*
   2 * Copyright 2013 Freescale Semiconductor, Inc.
   3 *
   4 * SPDX-License-Identifier:     GPL-2.0+
   5 */
   6
   7#include <common.h>
   8#include <asm/mmu.h>
   9#include <asm/immap_85xx.h>
  10#include <asm/processor.h>
  11#include <fsl_ddr_sdram.h>
  12#include <fsl_ddr_dimm_params.h>
  13#include <asm/io.h>
  14#include <asm/fsl_law.h>
  15
  16DECLARE_GLOBAL_DATA_PTR;
  17
  18#ifndef CONFIG_SYS_DDR_RAW_TIMING
  19
  20fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
  21        .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
  22        .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
  23        .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
  24        .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
  25        .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
  26        .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
  27        .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
  28        .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
  29        .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
  30        .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
  31        .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
  32        .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
  33        .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
  34        .ddr_data_init = CONFIG_MEM_INIT_VALUE,
  35        .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
  36        .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
  37        .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
  38        .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
  39        .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
  40        .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
  41        .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
  42        .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
  43        .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
  44        .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
  45};
  46
  47fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = {
  48        .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
  49        .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
  50        .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
  51        .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333,
  52        .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333,
  53        .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333,
  54        .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333,
  55        .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
  56        .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
  57        .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333,
  58        .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333,
  59        .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
  60        .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333,
  61        .ddr_data_init = CONFIG_MEM_INIT_VALUE,
  62        .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333,
  63        .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
  64        .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
  65        .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
  66        .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
  67        .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
  68        .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333,
  69        .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
  70        .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
  71        .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
  72};
  73
  74
  75fixed_ddr_parm_t fixed_ddr_parm_0[] = {
  76        {750, 850, &ddr_cfg_regs_800},
  77        {1060, 1333, &ddr_cfg_regs_1333},
  78        {0, 0, NULL}
  79};
  80
  81/*
  82 * Fixed sdram init -- doesn't use serial presence detect.
  83 */
  84phys_size_t fixed_sdram(void)
  85{
  86        int i;
  87        char buf[32];
  88        fsl_ddr_cfg_regs_t ddr_cfg_regs;
  89        phys_size_t ddr_size;
  90        ulong ddr_freq, ddr_freq_mhz;
  91
  92        ddr_freq = get_ddr_freq(0);
  93        ddr_freq_mhz = ddr_freq / 1000000;
  94
  95        printf("Configuring DDR for %s MT/s data rate\n",
  96                                strmhz(buf, ddr_freq));
  97
  98        for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
  99                if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
 100                   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
 101                        memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
 102                                                        sizeof(ddr_cfg_regs));
 103                        break;
 104                }
 105        }
 106
 107        if (fixed_ddr_parm_0[i].max_freq == 0)
 108                panic("Unsupported DDR data rate %s MT/s data rate\n",
 109                                        strmhz(buf, ddr_freq));
 110
 111        ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 112        fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
 113
 114        if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
 115                                        LAW_TRGT_IF_DDR_1) < 0) {
 116                printf("ERROR setting Local Access Windows for DDR\n");
 117                return 0;
 118        }
 119
 120        return ddr_size;
 121}
 122
 123#else /* CONFIG_SYS_DDR_RAW_TIMING */
 124/* Micron MT41J512M8_187E */
 125dimm_params_t ddr_raw_timing = {
 126        .n_ranks = 1,
 127        .rank_density = 1073741824u,
 128        .capacity = 1073741824u,
 129        .primary_sdram_width = 32,
 130        .ec_sdram_width = 0,
 131        .registered_dimm = 0,
 132        .mirrored_dimm = 0,
 133        .n_row_addr = 15,
 134        .n_col_addr = 10,
 135        .n_banks_per_sdram_device = 8,
 136        .edc_config = 0,
 137        .burst_lengths_bitmask = 0x0c,
 138
 139        .tckmin_x_ps = 1870,
 140        .caslat_x = 0x1e << 4,  /* 5,6,7,8 */
 141        .taa_ps = 13125,
 142        .twr_ps = 15000,
 143        .trcd_ps = 13125,
 144        .trrd_ps = 7500,
 145        .trp_ps = 13125,
 146        .tras_ps = 37500,
 147        .trc_ps = 50625,
 148        .trfc_ps = 160000,
 149        .twtr_ps = 7500,
 150        .trtp_ps = 7500,
 151        .refresh_rate_ps = 7800000,
 152        .tfaw_ps = 37500,
 153};
 154
 155int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 156                unsigned int controller_number,
 157                unsigned int dimm_number)
 158{
 159        const char dimm_model[] = "Fixed DDR on board";
 160
 161        if ((controller_number == 0) && (dimm_number == 0)) {
 162                memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
 163                memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
 164                memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
 165        }
 166
 167        return 0;
 168}
 169
 170void fsl_ddr_board_options(memctl_options_t *popts,
 171                                dimm_params_t *pdimm,
 172                                unsigned int ctrl_num)
 173{
 174        int i;
 175        popts->clk_adjust = 6;
 176        popts->cpo_override = 0x1f;
 177        popts->write_data_delay = 2;
 178        popts->half_strength_driver_enable = 1;
 179        /* Write leveling override */
 180        popts->wrlvl_en = 1;
 181        popts->wrlvl_override = 1;
 182        popts->wrlvl_sample = 0xf;
 183        popts->wrlvl_start = 0x8;
 184        popts->trwt_override = 1;
 185        popts->trwt = 0;
 186
 187        for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 188                popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
 189                popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
 190        }
 191}
 192
 193#endif /* CONFIG_SYS_DDR_RAW_TIMING */
 194