1
2
3
4
5
6
7#include <common.h>
8#include <asm/io.h>
9#include <asm/arch/imx-regs.h>
10#include <asm/arch/sys_proto.h>
11#include <asm/arch/crm_regs.h>
12#include <asm/arch/clock.h>
13#include <asm/arch/iomux-mx53.h>
14#include <asm/errno.h>
15#include <netdev.h>
16#include <mmc.h>
17#include <fsl_esdhc.h>
18#include <asm/gpio.h>
19
20#define ETHERNET_INT IMX_GPIO_NR(2, 31)
21
22DECLARE_GLOBAL_DATA_PTR;
23
24int dram_init(void)
25{
26 u32 size1, size2;
27
28 size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
29 size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
30
31 gd->ram_size = size1 + size2;
32
33 return 0;
34}
35void dram_init_banksize(void)
36{
37 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
38 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
39
40 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
41 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
42}
43
44#ifdef CONFIG_NAND_MXC
45static void setup_iomux_nand(void)
46{
47 static const iomux_v3_cfg_t nand_pads[] = {
48 NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
49 PAD_CTL_DSE_HIGH),
50 NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1,
51 PAD_CTL_DSE_HIGH),
52 NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
53 PAD_CTL_PUS_100K_UP),
54 NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
55 PAD_CTL_DSE_HIGH),
56 NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
57 PAD_CTL_DSE_HIGH),
58 NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
59 PAD_CTL_PUS_100K_UP),
60 NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
61 PAD_CTL_DSE_HIGH),
62 NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
63 PAD_CTL_DSE_HIGH),
64 NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
65 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
66 NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
67 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
68 NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
69 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
70 NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
71 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
72 NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
73 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
74 NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
75 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
76 NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
77 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
78 NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7,
79 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
80 };
81
82 u32 i, reg;
83
84 reg = __raw_readl(M4IF_BASE_ADDR + 0xc);
85 reg &= ~M4IF_GENP_WEIM_MM_MASK;
86 __raw_writel(reg, M4IF_BASE_ADDR + 0xc);
87 for (i = 0x4; i < 0x94; i += 0x18) {
88 reg = __raw_readl(WEIM_BASE_ADDR + i);
89 reg &= ~WEIM_GCR2_MUX16_BYP_GRANT_MASK;
90 __raw_writel(reg, WEIM_BASE_ADDR + i);
91 }
92
93 imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
94}
95#else
96static void setup_iomux_nand(void)
97{
98}
99#endif
100
101#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
102 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
103
104static void setup_iomux_uart(void)
105{
106 static const iomux_v3_cfg_t uart_pads[] = {
107 NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL),
108 NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL),
109 };
110
111 imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
112}
113
114#ifdef CONFIG_FSL_ESDHC
115struct fsl_esdhc_cfg esdhc_cfg[2] = {
116 {MMC_SDHC1_BASE_ADDR},
117 {MMC_SDHC2_BASE_ADDR},
118};
119
120int board_mmc_getcd(struct mmc *mmc)
121{
122 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
123 int ret;
124
125 imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
126 gpio_direction_input(IMX_GPIO_NR(1, 1));
127 imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4);
128 gpio_direction_input(IMX_GPIO_NR(1, 4));
129
130 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
131 ret = !gpio_get_value(IMX_GPIO_NR(1, 1));
132 else
133 ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
134
135 return ret;
136}
137
138#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
139 PAD_CTL_PUS_100K_UP)
140#define SD_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
141#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
142 PAD_CTL_DSE_HIGH)
143
144int board_mmc_init(bd_t *bis)
145{
146 static const iomux_v3_cfg_t sd1_pads[] = {
147 NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
148 NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL),
149 NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
150 NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
151 NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
152 NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
153 };
154
155 static const iomux_v3_cfg_t sd2_pads[] = {
156 NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL),
157 NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL),
158 NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL),
159 NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL),
160 NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL),
161 NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL),
162 NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL),
163 NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL),
164 NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL),
165 NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL),
166 };
167
168 u32 index;
169 s32 status = 0;
170
171 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
172 esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
173
174 for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
175 switch (index) {
176 case 0:
177 imx_iomux_v3_setup_multiple_pads(sd1_pads,
178 ARRAY_SIZE(sd1_pads));
179 break;
180 case 1:
181 imx_iomux_v3_setup_multiple_pads(sd2_pads,
182 ARRAY_SIZE(sd2_pads));
183 break;
184 default:
185 printf("Warning: you configured more ESDHC controller"
186 "(%d) as supported by the board(2)\n",
187 CONFIG_SYS_FSL_ESDHC_NUM);
188 return status;
189 }
190 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
191 }
192
193 return status;
194}
195#endif
196
197static void weim_smc911x_iomux(void)
198{
199 static const iomux_v3_cfg_t weim_smc911x_pads[] = {
200
201 NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16,
202 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
203 NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17,
204 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
205 NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18,
206 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
207 NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19,
208 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
209 NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20,
210 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
211 NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21,
212 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
213 NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22,
214 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
215 NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23,
216 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
217 NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24,
218 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
219 NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25,
220 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
221 NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26,
222 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
223 NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27,
224 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
225 NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28,
226 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
227 NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29,
228 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
229 NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30,
230 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
231 NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31,
232 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
233
234
235 NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
236 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
237 NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
238 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
239 NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
240 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
241 NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
242 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
243 NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
244 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
245 NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
246 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
247 NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
248 PAD_CTL_PKE | PAD_CTL_DSE_HIGH),
249
250
251 MX53_PAD_EIM_OE__EMI_WEIM_OE,
252 MX53_PAD_EIM_RW__EMI_WEIM_RW,
253 MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
254 };
255
256
257 imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31);
258 gpio_direction_input(ETHERNET_INT);
259
260
261 imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads,
262 ARRAY_SIZE(weim_smc911x_pads));
263}
264
265static void weim_cs1_settings(void)
266{
267 struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
268
269 writel(MX53ARD_CS1GCR1, &weim_regs->cs1gcr1);
270 writel(0x0, &weim_regs->cs1gcr2);
271 writel(MX53ARD_CS1RCR1, &weim_regs->cs1rcr1);
272 writel(MX53ARD_CS1RCR2, &weim_regs->cs1rcr2);
273 writel(MX53ARD_CS1WCR1, &weim_regs->cs1wcr1);
274 writel(0x0, &weim_regs->cs1wcr2);
275 writel(0x0, &weim_regs->wcr);
276
277 set_chipselect_size(CS0_64M_CS1_64M);
278}
279
280int board_early_init_f(void)
281{
282 setup_iomux_nand();
283 setup_iomux_uart();
284 return 0;
285}
286
287int board_init(void)
288{
289
290 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
291
292 return 0;
293}
294
295int board_eth_init(bd_t *bis)
296{
297 int rc = -ENODEV;
298
299 weim_smc911x_iomux();
300 weim_cs1_settings();
301
302#ifdef CONFIG_SMC911X
303 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
304#endif
305 return rc;
306}
307
308int checkboard(void)
309{
310 puts("Board: MX53ARD\n");
311
312 return 0;
313}
314
