LXR uboot/include/configs/dreamplug.h

   1/*
   2 * (C) Copyright 2011
   3 * Jason Cooper <u-boot@lakedaemon.net>
   4 *
   5 * Based on work by:
   6 * Marvell Semiconductor <www.marvell.com>
   7 * Written-by: Siddarth Gore <gores@marvell.com>
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12#ifndef _CONFIG_DREAMPLUG_H
  13#define _CONFIG_DREAMPLUG_H
  14
  15/*
  16 * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
  17 * from Linus' kernel.org tree.  This hasn't been updated primarily due to
  18 * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
  19 * here.
  20 */
  21#include <asm/mach-types.h>
  22#ifdef MACH_TYPE_DREAMPLUG
  23#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
  24#else
  25#define MACH_TYPE_DREAMPLUG            3550
  26#endif
  27
  28/*
  29 * Version number information
  30 */
  31#define CONFIG_IDENT_STRING     "\nMarvell-DreamPlug"
  32
  33/*
  34 * High Level Configuration Options (easy to change)
  35 */
  36#define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  37#define CONFIG_KIRKWOOD         1       /* SOC Family Name */
  38#define CONFIG_KW88F6281        1       /* SOC Name */
  39#define CONFIG_MACH_TYPE        MACH_TYPE_DREAMPLUG
  40#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42/*
  43 * Commands configuration
  44 */
  45#define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  46#include <config_cmd_default.h>
  47#define CONFIG_CMD_DHCP
  48#define CONFIG_CMD_ENV
  49#define CONFIG_CMD_FAT
  50#define CONFIG_CMD_SF
  51#define CONFIG_CMD_PING
  52#define CONFIG_CMD_USB
  53#define CONFIG_CMD_IDE
  54#define CONFIG_CMD_DATE
  55
  56/*
  57 * mv-common.h should be defined after CMD configs since it used them
  58 * to enable certain macros
  59 */
  60#include "mv-common.h"
  61
  62/*
  63 *  Environment variables configurations
  64 */
  65#ifdef CONFIG_SPI_FLASH
  66#define CONFIG_ENV_IS_IN_SPI_FLASH      1
  67#define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  68#else
  69#define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  70#endif
  71
  72#ifdef CONFIG_CMD_SF
  73#define CONFIG_SPI_FLASH                1
  74#define CONFIG_HARD_SPI                 1
  75#define CONFIG_KIRKWOOD_SPI             1
  76#define CONFIG_SPI_FLASH_MACRONIX       1
  77#define CONFIG_ENV_SPI_BUS              0
  78#define CONFIG_ENV_SPI_CS               0
  79#define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  80#endif
  81
  82/*
  83 * max 4k env size is enough, but in case of nand
  84 * it has to be rounded to sector size
  85 */
  86#define CONFIG_ENV_SIZE                 0x1000  /* 4k */
  87#define CONFIG_ENV_ADDR                 0x100000
  88#define CONFIG_ENV_OFFSET               0x100000 /* env starts here */
  89
  90/*
  91 * Default environment variables
  92 */
  93#define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  94        "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  95        "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  96        "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  97        "bootm 0x6400000;"
  98
  99#define CONFIG_EXTRA_ENV_SETTINGS       \
 100        "x_bootcmd_ethernet=ping 192.168.2.1\0" \
 101        "x_bootcmd_usb=usb start\0"     \
 102        "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
 103        "x_bootargs=console=ttyS0,115200\0"     \
 104        "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
 105
 106/*
 107 * Ethernet Driver configuration
 108 */
 109#ifdef CONFIG_CMD_NET
 110#define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
 111#define CONFIG_PHY_BASE_ADR     0
 112#endif /* CONFIG_CMD_NET */
 113
 114/*
 115 * SATA Driver configuration
 116 */
 117#ifdef CONFIG_MVSATA_IDE
 118#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 119#endif /*CONFIG_MVSATA_IDE*/
 120
 121/*
 122 * RTC driver configuration
 123 */
 124#ifdef CONFIG_CMD_DATE
 125#define CONFIG_RTC_MV
 126#endif /* CONFIG_CMD_DATE */
 127
 128#define CONFIG_SYS_ALT_MEMTEST
 129
 130/*
 131 * display enhanced info about the cpu at boot.
 132 */
 133#define CONFIG_DISPLAY_CPUINFO
 134
 135#define CONFIG_OF_LIBFDT
 136
 137#endif /* _CONFIG_DREAMPLUG_H */
 138