uboot/include/configs/tnetv107x_evm.h
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
   3 *
   4 * Based on davinci_dvevm.h. Original Copyrights follow:
   5 *
   6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   7 *
   8 * SPDX-License-Identifier:     GPL-2.0+
   9 */
  10
  11#ifndef __CONFIG_H
  12#define __CONFIG_H
  13
  14#include <linux/sizes.h>
  15#include <asm/arch/hardware.h>
  16#include <asm/arch/clock.h>
  17
  18/* Architecture, CPU, etc */
  19#define CONFIG_ARM1176
  20#define CONFIG_TNETV107X
  21#define CONFIG_TNETV107X_EVM
  22#define CONFIG_TNETV107X_WATCHDOG
  23#define CONFIG_ARCH_CPU_INIT
  24#define CONFIG_SYS_UBOOT_BASE           CONFIG_SYS_TEXT_BASE
  25#define CONFIG_DISABLE_TCM
  26#define CONFIG_PERIPORT_REMAP
  27#define CONFIG_PERIPORT_BASE            0x2000000
  28#define CONFIG_PERIPORT_SIZE            0x10
  29#define CONFIG_SYS_CLK_FREQ             clk_get_rate(TNETV107X_LPSC_ARM)
  30
  31#define CONFIG_SYS_TIMERBASE            TNETV107X_TIMER0_BASE
  32#define CONFIG_SYS_HZ_CLOCK             clk_get_rate(TNETV107X_LPSC_TIMER0)
  33
  34#define CONFIG_PLL_SYS_EXT_FREQ         25000000
  35#define CONFIG_PLL_TDM_EXT_FREQ         19200000
  36#define CONFIG_PLL_ETH_EXT_FREQ         25000000
  37
  38/* Memory Info */
  39#define CONFIG_SYS_MALLOC_LEN           (0x10000 + 1*1024*1024)
  40#define PHYS_SDRAM_1                    TNETV107X_DDR_EMIF_DATA_BASE
  41#define PHYS_SDRAM_1_SIZE               0x04000000
  42#define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  43#define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + 16*1024*1024)
  44#define CONFIG_NR_DRAM_BANKS            1
  45
  46#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  47#define CONFIG_SYS_INIT_RAM_SIZE        0x1000
  48#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + \
  49                                         CONFIG_SYS_INIT_RAM_SIZE - \
  50                                         GENERATED_GBL_DATA_SIZE)
  51
  52/* Serial Driver Info */
  53#define CONFIG_SYS_NS16550
  54#define CONFIG_SYS_NS16550_SERIAL
  55#define CONFIG_SYS_NS16550_REG_SIZE     -4
  56#define CONFIG_SYS_NS16550_COM1         TNETV107X_UART1_BASE
  57#define CONFIG_SYS_NS16550_CLK          clk_get_rate(TNETV107X_LPSC_UART1)
  58#define CONFIG_CONS_INDEX               1
  59#define CONFIG_BAUDRATE                 115200
  60
  61/* Flash and environment info */
  62#define CONFIG_SYS_NO_FLASH
  63#define CONFIG_ENV_IS_IN_NAND
  64#define CONFIG_NAND_DAVINCI
  65#define CONFIG_ENV_SIZE                 (SZ_128K)
  66#define CONFIG_SYS_NAND_HW_ECC
  67#define CONFIG_SYS_NAND_1BIT_ECC
  68#define CONFIG_SYS_NAND_CS              2
  69#define CONFIG_SYS_NAND_USE_FLASH_BBT
  70#define CONFIG_SYS_NAND_BASE            TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
  71#define CONFIG_SYS_NAND_MASK_CLE                0x10
  72#define CONFIG_SYS_NAND_MASK_ALE                0x8
  73#define CONFIG_SYS_MAX_NAND_DEVICE      1
  74#define CONFIG_MTD_PARTITIONS
  75#define CONFIG_CMD_MTDPARTS
  76#define CONFIG_MTD_DEVICE
  77#define CONFIG_JFFS2_NAND
  78#define CONFIG_ENV_OFFSET               0x180000
  79
  80/*
  81 * davinci_nand is a bit of a misnomer since this particular EMIF block is
  82 * commonly used across multiple TI devices.  Unfortunately, this misnomer
  83 * (amongst others) carries forward into the kernel too.  Consequently, if we
  84 * use a different device name here, the mtdparts variable won't be usable as
  85 * a kernel command-line argument.
  86 */
  87#define MTDIDS_DEFAULT                  "nand0=davinci_nand.0"
  88#define MTDPARTS_DEFAULT                "mtdparts=davinci_nand.0:"      \
  89                                                "1536k(uboot)ro,"       \
  90                                                "128k(params)ro,"       \
  91                                                "4m(kernel),"           \
  92                                                "-(filesystem)"
  93
  94/* General U-Boot configuration */
  95#define CONFIG_BOOTFILE                 "uImage"
  96#define CONFIG_SYS_PROMPT               "U-Boot > "
  97#define CONFIG_SYS_CBSIZE               1024
  98#define CONFIG_SYS_MAXARGS              64
  99#define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 100#define CONFIG_VERSION_VARIABLE
 101#define CONFIG_AUTO_COMPLETE
 102#define CONFIG_SYS_HUSH_PARSER
 103#define CONFIG_CMDLINE_EDITING
 104#define CONFIG_SYS_LONGHELP
 105#define CONFIG_CRC32_VERIFY
 106#define CONFIG_MX_CYCLIC
 107#define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE +            \
 108                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 109#define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_MEMTEST_START +     \
 110                                         0x700000)
 111#define LINUX_BOOT_PARAM_ADDR           (CONFIG_SYS_MEMTEST_START + 0x100)
 112#define CONFIG_CMDLINE_TAG
 113#define CONFIG_SETUP_MEMORY_TAGS
 114#define CONFIG_BOOTARGS                 "mem=32M console=ttyS1,115200n8 " \
 115                                        "root=/dev/mmcblk0p1 rw noinitrd"
 116#define CONFIG_BOOTCOMMAND              ""
 117#define CONFIG_BOOTDELAY                1
 118
 119#define CONFIG_CMD_BDI
 120#define CONFIG_CMD_BOOTD
 121#define CONFIG_CMD_CONSOLE
 122#define CONFIG_CMD_ECHO
 123#define CONFIG_CMD_EDITENV
 124#define CONFIG_CMD_IMI
 125#define CONFIG_CMD_ITEST
 126#define CONFIG_CMD_LOADB
 127#define CONFIG_CMD_LOADS
 128#define CONFIG_CMD_MEMORY
 129#define CONFIG_CMD_MISC
 130#define CONFIG_CMD_RUN
 131#define CONFIG_CMD_SAVEENV
 132#define CONFIG_CMD_SOURCE
 133#define CONFIG_CMD_ENV
 134#define CONFIG_CMD_ASKENV
 135#define CONFIG_CMD_SAVES
 136#define CONFIG_CMD_MEMORY
 137#define CONFIG_CMD_NAND
 138#define CONFIG_CMD_JFFS2
 139
 140#endif /* __CONFIG_H */
 141