/*
 * vme8349.c -- esd VME8349 board support
 *
 * Copyright (c) 2008-2009 esd gmbh.
 *
 * (C) Copyright 2006
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#include <asm/io.h>
#include <asm/mmu.h>
#include <spd.h>
#include <spd_sdram.h>
#include <i2c.h>
#include <netdev.h>

void ddr_enable_ecc(unsigned int dram_size);

phys_size_t initdram(int board_type)
{
        volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
        u32 msize = 0;

        if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
                return -1;

        /* DDR SDRAM - Main memory */
        im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;

        msize = spd_sdram();

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
        /*
         * Initialize and enable DDR ECC.
         */
        ddr_enable_ecc(msize * 1024 * 1024);
#endif

        /* Now check memory size (after ECC is initialized) */
        msize = get_ram_size(0, msize);

        /* return total bus SDRAM size(bytes)  -- DDR */
        return msize * 1024 * 1024;
}

int checkboard(void)
{
#ifdef VME_CADDY2
        puts("Board: esd VME-CADDY/2\n");
#else
        puts("Board: esd VME-CPU/8349\n");
#endif

        return 0;
}

#ifdef VME_CADDY2
int board_eth_init(bd_t *bis)
{
        return pci_eth_init(bis);
}
#endif

#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
        ft_cpu_setup(blob, bd);

#ifdef CONFIG_PCI
        ft_pci_setup(blob, bd);
#endif
}
#endif

int misc_init_r()
{
        immap_t *im = (immap_t *)CONFIG_SYS_IMMR;

        clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);

        return 0;
}

/*
 * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
 * and VME-CADDY/2) have different SDRAM configurations.
 */
#ifdef VME_CADDY2
#define SMALL_RAM       0xff
#define LARGE_RAM       0x00
#else
#define SMALL_RAM       0x00
#define LARGE_RAM       0xff
#endif

#define SPD_VAL(a, b)   (((a) & SMALL_RAM) | ((b) & LARGE_RAM))

static spd_eeprom_t default_spd_eeprom = {
        SPD_VAL(0x80, 0x80),    /* 00 use 128 Bytes */
        SPD_VAL(0x07, 0x07),    /* 01 use 128 Bytes */
        SPD_MEMTYPE_DDR2,       /* 02 type is DDR2 */
        SPD_VAL(0x0d, 0x0d),    /* 03 rows: 13 */
        SPD_VAL(0x09, 0x0a),    /* 04 cols:  9 / 10 */
        SPD_VAL(0x00, 0x00),    /* 05 */
        SPD_VAL(0x40, 0x40),    /* 06 */
        SPD_VAL(0x00, 0x00),    /* 07 */
        SPD_VAL(0x05, 0x05),    /* 08 */
        SPD_VAL(0x30, 0x30),    /* 09 */
        SPD_VAL(0x45, 0x45),    /* 10 */
        SPD_VAL(0x02, 0x02),    /* 11 ecc used */
        SPD_VAL(0x82, 0x82),    /* 12 */
        SPD_VAL(0x10, 0x10),    /* 13 */
        SPD_VAL(0x08, 0x08),    /* 14 */
        SPD_VAL(0x00, 0x00),    /* 15 */
        SPD_VAL(0x0c, 0x0c),    /* 16 */
        SPD_VAL(0x04, 0x08),    /* 17 banks: 4 / 8 */
        SPD_VAL(0x38, 0x38),    /* 18 */
        SPD_VAL(0x00, 0x00),    /* 19 */
        SPD_VAL(0x02, 0x02),    /* 20 */
        SPD_VAL(0x00, 0x00),    /* 21 */
        SPD_VAL(0x03, 0x03),    /* 22 */
        SPD_VAL(0x3d, 0x3d),    /* 23 */
        SPD_VAL(0x45, 0x45),    /* 24 */
        SPD_VAL(0x50, 0x50),    /* 25 */
        SPD_VAL(0x45, 0x45),    /* 26 */
        SPD_VAL(0x3c, 0x3c),    /* 27 */
        SPD_VAL(0x28, 0x28),    /* 28 */
        SPD_VAL(0x3c, 0x3c),    /* 29 */
        SPD_VAL(0x2d, 0x2d),    /* 30 */
        SPD_VAL(0x20, 0x80),    /* 31 */
        SPD_VAL(0x20, 0x20),    /* 32 */
        SPD_VAL(0x27, 0x27),    /* 33 */
        SPD_VAL(0x10, 0x10),    /* 34 */
        SPD_VAL(0x17, 0x17),    /* 35 */
        SPD_VAL(0x3c, 0x3c),    /* 36 */
        SPD_VAL(0x1e, 0x1e),    /* 37 */
        SPD_VAL(0x1e, 0x1e),    /* 38 */
        SPD_VAL(0x00, 0x00),    /* 39 */
        SPD_VAL(0x00, 0x06),    /* 40 */
        SPD_VAL(0x37, 0x37),    /* 41 */
        SPD_VAL(0x4b, 0x7f),    /* 42 */
        SPD_VAL(0x80, 0x80),    /* 43 */
        SPD_VAL(0x18, 0x18),    /* 44 */
        SPD_VAL(0x22, 0x22),    /* 45 */
        SPD_VAL(0x00, 0x00),    /* 46 */
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
        SPD_VAL(0x10, 0x10),    /* 62 */
        SPD_VAL(0x7e, 0x1d),    /* 63 */
        { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
        SPD_VAL(0x00, 0x00),    /* 72 */
#ifdef VME_CADDY2
        { "vme-caddy/2 ram   " }
#else
        { "vme-cpu/2 ram     " }
#endif
};

int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
        int old_bus = i2c_get_bus_num();
        unsigned int l, sum;
        int valid = 0;

        i2c_set_bus_num(0);

        if (i2c_read(chip, addr, alen, buffer, len) == 0)
                if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
                        sum = 0;
                        for (l = 0; l < 63; l++)
                                sum = (sum + buffer[l]) & 0xff;
                        if (sum == buffer[63])
                                valid = 1;
                        else
                                printf("Invalid checksum in EEPROM %02x %02x\n",
                                       sum, buffer[63]);
                }

        if (valid == 0) {
                memcpy(buffer, (void *)&default_spd_eeprom, len);
                sum = 0;
                for (l = 0; l < 63; l++)
                        sum = (sum + buffer[l]) & 0xff;
                if (sum != buffer[63])
                        printf("Invalid checksum in FLASH %02x %02x\n",
                               sum, buffer[63]);
                buffer[63] = sum;
        }

        i2c_set_bus_num(old_bus);

        return 0;
}