1/* 2 * Copyright 2007 Freescale Semiconductor, Inc. 3 * 4 * This file is licensed under the terms of the GNU General Public 5 * License Version 2. This file is licensed "as is" without any 6 * warranty of any kind, whether express or implied. 7 */ 8 9#ifndef _CONFIG_CMD_ALL_H 10#define _CONFIG_CMD_ALL_H 11 12/* 13 * Alphabetical list of all possible commands. 14 */ 15 16#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ 17#define CONFIG_CMD_ASKENV /* ask for env variable */ 18#define CONFIG_CMD_BDI /* bdinfo */ 19#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ 20#define CONFIG_CMD_BMP /* BMP support */ 21#define CONFIG_CMD_BOOTD /* bootd */ 22#define CONFIG_CMD_BOOTZ /* boot zImage */ 23#define CONFIG_CMD_BSP /* Board Specific functions */ 24#define CONFIG_CMD_CACHE /* icache, dcache */ 25#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ 26#define CONFIG_CMD_CLK /* Clock support */ 27#define CONFIG_CMD_CONSOLE /* coninfo */ 28#define CONFIG_CMD_DATE /* support for RTC, date/time...*/ 29#define CONFIG_CMD_DHCP /* DHCP Support */ 30#define CONFIG_CMD_DIAG /* Diagnostics */ 31#define CONFIG_CMD_DISPLAY /* Display support */ 32#define CONFIG_CMD_DOC /* Disk-On-Chip Support */ 33#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */ 34#define CONFIG_CMD_ECHO /* echo arguments */ 35#define CONFIG_CMD_EDITENV /* editenv */ 36#define CONFIG_CMD_EEPROM /* EEPROM read/write support */ 37#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */ 38#define CONFIG_CMD_EXT2 /* EXT2 Support */ 39#define CONFIG_CMD_FAT /* FAT support */ 40#define CONFIG_CMD_FDC /* Floppy Disk Support */ 41#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ 42#define CONFIG_CMD_FPGA /* FPGA configuration Support */ 43#define CONFIG_CMD_FUSE /* Device fuse support */ 44#define CONFIG_CMD_GETTIME /* Get time since boot */ 45#define CONFIG_CMD_HASH /* calculate hash / digest */ 46#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ 47#define CONFIG_CMD_I2C /* I2C serial bus support */ 48#define CONFIG_CMD_IDE /* IDE harddisk support */ 49#define CONFIG_CMD_IMI /* iminfo */ 50#define CONFIG_CMD_IMLS /* List all found images */ 51#define CONFIG_CMD_IMMAP /* IMMR dump support */ 52#define CONFIG_CMD_IO /* Access to X86 IO space */ 53#define CONFIG_CMD_IRQ /* irqinfo */ 54#define CONFIG_CMD_ITEST /* Integer (and string) test */ 55#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 56#define CONFIG_CMD_KGDB /* kgdb */ 57#define CONFIG_CMD_LICENSE /* console license display */ 58#define CONFIG_CMD_LOADB /* loadb */ 59#define CONFIG_CMD_LOADS /* loads */ 60#define CONFIG_CMD_MEMINFO /* meminfo */ 61#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */ 62#define CONFIG_CMD_MEMTEST /* mtest */ 63#define CONFIG_CMD_MFSL /* FSL support for Microblaze */ 64#define CONFIG_CMD_MII /* MII support */ 65#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ 66#define CONFIG_CMD_MMC /* MMC support */ 67#define CONFIG_CMD_MTDPARTS /* mtd parts support */ 68#define CONFIG_CMD_NAND /* NAND support */ 69#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 70#define CONFIG_CMD_NFS /* NFS support */ 71#define CONFIG_CMD_ONENAND /* OneNAND support */ 72#define CONFIG_CMD_PCI /* pciinfo */ 73#define CONFIG_CMD_PCMCIA /* PCMCIA support */ 74#define CONFIG_CMD_PING /* ping support */ 75#define CONFIG_CMD_PORTIO /* Port I/O */ 76#define CONFIG_CMD_REGINFO /* Register dump */ 77#define CONFIG_CMD_REISER /* Reiserfs support */ 78#define CONFIG_CMD_RARP /* rarpboot support */ 79#define CONFIG_CMD_READ /* Read data from partition */ 80#define CONFIG_CMD_RUN /* run command in env variable */ 81#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ 82#define CONFIG_CMD_SAVEENV /* saveenv */ 83#define CONFIG_CMD_SAVES /* save S record dump */ 84#define CONFIG_CMD_SCSI /* SCSI Support */ 85#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ 86#define CONFIG_CMD_SETEXPR /* setexpr support */ 87#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ 88#define CONFIG_CMD_SNTP /* SNTP support */ 89#define CONFIG_CMD_SOURCE /* "source" command support */ 90#define CONFIG_CMD_SPI /* SPI utility */ 91#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ 92#define CONFIG_CMD_UBI /* UBI Support */ 93#define CONFIG_CMD_UBIFS /* UBIFS Support */ 94#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ 95#define CONFIG_CMD_UNZIP /* unzip from memory to memory */ 96#define CONFIG_CMD_USB /* USB Support */ 97#define CONFIG_CMD_XIMG /* Load part of Multi Image */ 98#define CONFIG_CMD_ZFS /* ZFS Support */ 99 100#endif /* _CONFIG_CMD_ALL_H */ 101