1/* 2 * armboot - Startup Code for ARM920 CPU-core 3 * 4 * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> 5 * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> 6 * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11#include <asm-offsets.h> 12#include <common.h> 13#include <config.h> 14 15/* 16 ************************************************************************* 17 * 18 * Startup Code (called from the ARM reset exception vector) 19 * 20 * do important init only if we don't start from memory! 21 * relocate armboot to ram 22 * setup stack 23 * jump to second stage 24 * 25 ************************************************************************* 26 */ 27 28 .globl reset 29 30reset: 31 /* 32 * set the cpu to SVC32 mode 33 */ 34 mrs r0, cpsr 35 bic r0, r0, #0x1f 36 orr r0, r0, #0xd3 37 msr cpsr, r0 38 39#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) 40 /* 41 * relocate exception table 42 */ 43 ldr r0, =_start 44 ldr r1, =0x0 45 mov r2, #16 46copyex: 47 subs r2, r2, #1 48 ldr r3, [r0], #4 49 str r3, [r1], #4 50 bne copyex 51#endif 52 53#ifdef CONFIG_S3C24X0 54 /* turn off the watchdog */ 55 56# if defined(CONFIG_S3C2400) 57# define pWTCON 0x15300000 58# define INTMSK 0x14400008 /* Interrupt-Controller base addresses */ 59# define CLKDIVN 0x14800014 /* clock divisor register */ 60#else 61# define pWTCON 0x53000000 62# define INTMSK 0x4A000008 /* Interrupt-Controller base addresses */ 63# define INTSUBMSK 0x4A00001C 64# define CLKDIVN 0x4C000014 /* clock divisor register */ 65# endif 66 67 ldr r0, =pWTCON 68 mov r1, #0x0 69 str r1, [r0] 70 71 /* 72 * mask all IRQs by setting all bits in the INTMR - default 73 */ 74 mov r1, #0xffffffff 75 ldr r0, =INTMSK 76 str r1, [r0] 77# if defined(CONFIG_S3C2410) 78 ldr r1, =0x3ff 79 ldr r0, =INTSUBMSK 80 str r1, [r0] 81# endif 82 83 /* FCLK:HCLK:PCLK = 1:2:4 */ 84 /* default FCLK is 120 MHz ! */ 85 ldr r0, =CLKDIVN 86 mov r1, #3 87 str r1, [r0] 88#endif /* CONFIG_S3C24X0 */ 89 90 /* 91 * we do sys-critical inits only at reboot, 92 * not when booting from ram! 93 */ 94#ifndef CONFIG_SKIP_LOWLEVEL_INIT 95 bl cpu_init_crit 96#endif 97 98 bl _main 99 100/*------------------------------------------------------------------------------*/ 101 102 .globl c_runtime_cpu_setup 103c_runtime_cpu_setup: 104 105 mov pc, lr 106 107/* 108 ************************************************************************* 109 * 110 * CPU_init_critical registers 111 * 112 * setup important registers 113 * setup memory timing 114 * 115 ************************************************************************* 116 */ 117 118 119#ifndef CONFIG_SKIP_LOWLEVEL_INIT 120cpu_init_crit: 121 /* 122 * flush v4 I/D caches 123 */ 124 mov r0, #0 125 mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ 126 mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ 127 128 /* 129 * disable MMU stuff and caches 130 */ 131 mrc p15, 0, r0, c1, c0, 0 132 bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) 133 bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) 134 orr r0, r0, #0x00000002 @ set bit 2 (A) Align 135 orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache 136 mcr p15, 0, r0, c1, c0, 0 137 138 /* 139 * before relocating, we have to setup RAM timing 140 * because memory timing is board-dependend, you will 141 * find a lowlevel_init.S in your board directory. 142 */ 143 mov ip, lr 144 145 bl lowlevel_init 146 147 mov lr, ip 148 mov pc, lr 149#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ 150