LXR uboot/include/configs/dreamplug.h

   1/*
   2 * (C) Copyright 2011
   3 * Jason Cooper <u-boot@lakedaemon.net>
   4 *
   5 * Based on work by:
   6 * Marvell Semiconductor <www.marvell.com>
   7 * Written-by: Siddarth Gore <gores@marvell.com>
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12#ifndef _CONFIG_DREAMPLUG_H
  13#define _CONFIG_DREAMPLUG_H
  14
  15/*
  16 * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
  17 * from Linus' kernel.org tree.  This hasn't been updated primarily due to
  18 * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
  19 * here.
  20 */
  21#include <asm/mach-types.h>
  22#ifdef MACH_TYPE_DREAMPLUG
  23#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
  24#else
  25#define MACH_TYPE_DREAMPLUG            3550
  26#endif
  27
  28/*
  29 * Version number information
  30 */
  31#define CONFIG_IDENT_STRING     "\nMarvell-DreamPlug"
  32
  33/*
  34 * High Level Configuration Options (easy to change)
  35 */
  36#define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  37#define CONFIG_KW88F6281        1       /* SOC Name */
  38#define CONFIG_MACH_TYPE        MACH_TYPE_DREAMPLUG
  39#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  40
  41/*
  42 * Commands configuration
  43 */
  44#define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  45#include <config_cmd_default.h>
  46#define CONFIG_CMD_DHCP
  47#define CONFIG_CMD_ENV
  48#define CONFIG_CMD_FAT
  49#define CONFIG_CMD_SF
  50#define CONFIG_CMD_PING
  51#define CONFIG_CMD_USB
  52#define CONFIG_CMD_IDE
  53#define CONFIG_CMD_DATE
  54
  55/*
  56 * mv-common.h should be defined after CMD configs since it used them
  57 * to enable certain macros
  58 */
  59#include "mv-common.h"
  60
  61/*
  62 *  Environment variables configurations
  63 */
  64#ifdef CONFIG_SPI_FLASH
  65#define CONFIG_ENV_IS_IN_SPI_FLASH      1
  66#define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  67#else
  68#define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  69#endif
  70
  71#ifdef CONFIG_CMD_SF
  72#define CONFIG_SPI_FLASH                1
  73#define CONFIG_HARD_SPI                 1
  74#define CONFIG_KIRKWOOD_SPI             1
  75#define CONFIG_SPI_FLASH_MACRONIX       1
  76#define CONFIG_ENV_SPI_BUS              0
  77#define CONFIG_ENV_SPI_CS               0
  78#define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  79#endif
  80
  81/*
  82 * max 4k env size is enough, but in case of nand
  83 * it has to be rounded to sector size
  84 */
  85#define CONFIG_ENV_SIZE                 0x1000  /* 4k */
  86#define CONFIG_ENV_ADDR                 0x100000
  87#define CONFIG_ENV_OFFSET               0x100000 /* env starts here */
  88
  89/*
  90 * Default environment variables
  91 */
  92#define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  93        "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  94        "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  95        "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  96        "bootm 0x6400000;"
  97
  98#define CONFIG_EXTRA_ENV_SETTINGS       \
  99        "x_bootcmd_ethernet=ping 192.168.2.1\0" \
 100        "x_bootcmd_usb=usb start\0"     \
 101        "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
 102        "x_bootargs=console=ttyS0,115200\0"     \
 103        "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
 104
 105/*
 106 * Ethernet Driver configuration
 107 */
 108#ifdef CONFIG_CMD_NET
 109#define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
 110#define CONFIG_PHY_BASE_ADR     0
 111#endif /* CONFIG_CMD_NET */
 112
 113/*
 114 * SATA Driver configuration
 115 */
 116#ifdef CONFIG_MVSATA_IDE
 117#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 118#endif /*CONFIG_MVSATA_IDE*/
 119
 120/*
 121 * RTC driver configuration
 122 */
 123#ifdef CONFIG_CMD_DATE
 124#define CONFIG_RTC_MV
 125#endif /* CONFIG_CMD_DATE */
 126
 127#define CONFIG_SYS_ALT_MEMTEST
 128
 129/*
 130 * display enhanced info about the cpu at boot.
 131 */
 132#define CONFIG_DISPLAY_CPUINFO
 133
 134#define CONFIG_OF_LIBFDT
 135
 136#endif /* _CONFIG_DREAMPLUG_H */
 137