uboot/include/configs/mx53loco.h
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2011 Freescale Semiconductor, Inc.
   3 * Jason Liu <r64343@freescale.com>
   4 *
   5 * Configuration settings for Freescale MX53 low cost board.
   6 *
   7 * SPDX-License-Identifier:     GPL-2.0+
   8 */
   9
  10#ifndef __CONFIG_H
  11#define __CONFIG_H
  12
  13#define CONFIG_MX53
  14
  15#define CONFIG_DISPLAY_BOARDINFO
  16
  17#define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
  18
  19#include <asm/arch/imx-regs.h>
  20
  21#define CONFIG_CMDLINE_TAG
  22#define CONFIG_SETUP_MEMORY_TAGS
  23#define CONFIG_INITRD_TAG
  24
  25#define CONFIG_SYS_GENERIC_BOARD
  26
  27/* Size of malloc() pool */
  28#define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  29
  30#define CONFIG_BOARD_EARLY_INIT_F
  31#define CONFIG_BOARD_LATE_INIT
  32#define CONFIG_MXC_GPIO
  33#define CONFIG_REVISION_TAG
  34
  35#define CONFIG_MXC_UART
  36#define CONFIG_MXC_UART_BASE    UART1_BASE
  37
  38/* MMC Configs */
  39#define CONFIG_FSL_ESDHC
  40#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  41#define CONFIG_SYS_FSL_ESDHC_NUM        2
  42
  43#define CONFIG_MMC
  44#define CONFIG_CMD_MMC
  45#define CONFIG_GENERIC_MMC
  46#define CONFIG_CMD_FAT
  47#define CONFIG_CMD_EXT2
  48#define CONFIG_DOS_PARTITION
  49
  50/* Eth Configs */
  51#define CONFIG_MII
  52
  53#define CONFIG_FEC_MXC
  54#define IMX_FEC_BASE    FEC_BASE_ADDR
  55#define CONFIG_FEC_MXC_PHYADDR  0x1F
  56
  57#define CONFIG_CMD_PING
  58#define CONFIG_CMD_DHCP
  59#define CONFIG_CMD_MII
  60#define CONFIG_CMD_NET
  61
  62/* USB Configs */
  63#define CONFIG_CMD_USB
  64#define CONFIG_CMD_FAT
  65#define CONFIG_USB_EHCI
  66#define CONFIG_USB_EHCI_MX5
  67#define CONFIG_USB_STORAGE
  68#define CONFIG_USB_HOST_ETHER
  69#define CONFIG_USB_ETHER_ASIX
  70#define CONFIG_USB_ETHER_MCS7830
  71#define CONFIG_USB_ETHER_SMSC95XX
  72#define CONFIG_MXC_USB_PORT     1
  73#define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  74#define CONFIG_MXC_USB_FLAGS    0
  75
  76/* I2C Configs */
  77#define CONFIG_SYS_I2C
  78#define CONFIG_SYS_I2C_MXC
  79
  80/* PMIC Controller */
  81#define CONFIG_POWER
  82#define CONFIG_POWER_I2C
  83#define CONFIG_DIALOG_POWER
  84#define CONFIG_POWER_FSL
  85#define CONFIG_POWER_FSL_MC13892
  86#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
  87#define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
  88
  89/* allow to overwrite serial and ethaddr */
  90#define CONFIG_ENV_OVERWRITE
  91#define CONFIG_CONS_INDEX               1
  92#define CONFIG_BAUDRATE                 115200
  93
  94/* Command definition */
  95#include <config_cmd_default.h>
  96#define CONFIG_CMD_BOOTZ
  97#define CONFIG_SUPPORT_RAW_INITRD
  98
  99#undef CONFIG_CMD_IMLS
 100
 101#define CONFIG_BOOTDELAY        1
 102
 103#define CONFIG_ETHPRIME         "FEC0"
 104
 105#define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
 106#define CONFIG_SYS_TEXT_BASE    0x77800000
 107
 108#define CONFIG_EXTRA_ENV_SETTINGS \
 109        "script=boot.scr\0" \
 110        "image=zImage\0" \
 111        "fdt_addr=0x71000000\0" \
 112        "boot_fdt=try\0" \
 113        "ip_dyn=yes\0" \
 114        "mmcdev=0\0" \
 115        "mmcpart=1\0" \
 116        "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 117        "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
 118        "loadbootscript=" \
 119                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 120        "bootscript=echo Running bootscript from mmc ...; " \
 121                "source\0" \
 122        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 123        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 124        "mmcboot=echo Booting from mmc ...; " \
 125                "run mmcargs; " \
 126                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 127                        "if run loadfdt; then " \
 128                                "bootz ${loadaddr} - ${fdt_addr}; " \
 129                        "else " \
 130                                "if test ${boot_fdt} = try; then " \
 131                                        "bootz; " \
 132                                "else " \
 133                                        "echo WARN: Cannot load the DT; " \
 134                                "fi; " \
 135                        "fi; " \
 136                "else " \
 137                        "bootz; " \
 138                "fi;\0" \
 139        "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 140                "root=/dev/nfs " \
 141                "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 142        "netboot=echo Booting from net ...; " \
 143                "run netargs; " \
 144                "if test ${ip_dyn} = yes; then " \
 145                        "setenv get_cmd dhcp; " \
 146                "else " \
 147                        "setenv get_cmd tftp; " \
 148                "fi; " \
 149                "${get_cmd} ${image}; " \
 150                "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 151                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 152                                "bootz ${loadaddr} - ${fdt_addr}; " \
 153                        "else " \
 154                                "if test ${boot_fdt} = try; then " \
 155                                        "bootz; " \
 156                                "else " \
 157                                        "echo ERROR: Cannot load the DT; " \
 158                                        "exit; " \
 159                                "fi; " \
 160                        "fi; " \
 161                "else " \
 162                        "bootz; " \
 163                "fi;\0"
 164
 165#define CONFIG_BOOTCOMMAND \
 166        "mmc dev ${mmcdev}; if mmc rescan; then " \
 167                "if run loadbootscript; then " \
 168                        "run bootscript; " \
 169                "else " \
 170                        "if run loadimage; then " \
 171                                "run mmcboot; " \
 172                        "else run netboot; " \
 173                        "fi; " \
 174                "fi; " \
 175        "else run netboot; fi"
 176
 177#define CONFIG_ARP_TIMEOUT      200UL
 178
 179/* Miscellaneous configurable options */
 180#define CONFIG_SYS_LONGHELP             /* undef to save memory */
 181#define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 182#define CONFIG_AUTO_COMPLETE
 183#define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 184
 185/* Print Buffer Size */
 186#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 187#define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 188#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 189
 190#define CONFIG_SYS_MEMTEST_START       0x70000000
 191#define CONFIG_SYS_MEMTEST_END         0x70010000
 192
 193#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 194
 195#define CONFIG_CMDLINE_EDITING
 196
 197/* Physical Memory Map */
 198#define CONFIG_NR_DRAM_BANKS    2
 199#define PHYS_SDRAM_1                    CSD0_BASE_ADDR
 200#define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
 201#define PHYS_SDRAM_2                    CSD1_BASE_ADDR
 202#define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
 203#define PHYS_SDRAM_SIZE                 (gd->ram_size)
 204
 205#define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 206#define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 207#define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 208
 209#define CONFIG_SYS_INIT_SP_OFFSET \
 210        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 211#define CONFIG_SYS_INIT_SP_ADDR \
 212        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 213
 214/* FLASH and environment organization */
 215#define CONFIG_SYS_NO_FLASH
 216
 217#define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 218#define CONFIG_ENV_SIZE        (8 * 1024)
 219#define CONFIG_ENV_IS_IN_MMC
 220#define CONFIG_SYS_MMC_ENV_DEV 0
 221
 222#define CONFIG_OF_LIBFDT
 223
 224#define CONFIG_CMD_SATA
 225#ifdef CONFIG_CMD_SATA
 226        #define CONFIG_DWC_AHSATA
 227        #define CONFIG_SYS_SATA_MAX_DEVICE      1
 228        #define CONFIG_DWC_AHSATA_PORT_ID       0
 229        #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 230        #define CONFIG_LBA48
 231        #define CONFIG_LIBATA
 232#endif
 233
 234/* Framebuffer and LCD */
 235#define CONFIG_PREBOOT
 236#define CONFIG_VIDEO
 237#define CONFIG_VIDEO_IPUV3
 238#define CONFIG_CFB_CONSOLE
 239#define CONFIG_VGA_AS_SINGLE_DEVICE
 240#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 241#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 242#define CONFIG_VIDEO_BMP_RLE8
 243#define CONFIG_SPLASH_SCREEN
 244#define CONFIG_BMP_16BPP
 245#define CONFIG_VIDEO_LOGO
 246#define CONFIG_IPUV3_CLK        200000000
 247
 248#endif                          /* __CONFIG_H */
 249