LXR uboot/board/bf609-ezkit/bf609-ezkit.c

   1/*
   2 * U-boot - main board file
   3 *
   4 * Copyright (c) 2008-2011 Analog Devices Inc.
   5 *
   6 * Licensed under the GPL-2 or later.
   7 */
   8
   9#include <common.h>
  10#include <netdev.h>
  11#include <asm/blackfin.h>
  12#include <asm/io.h>
  13#include <asm/sdh.h>
  14#include <asm/portmux.h>
  15#include "soft_switch.h"
  16
  17int checkboard(void)
  18{
  19        printf("Board: ADI BF609 EZ-Kit board\n");
  20        printf("       Support: http://blackfin.uclinux.org/\n");
  21        return 0;
  22}
  23
  24int board_early_init_f(void)
  25{
  26        static const unsigned short pins[] = {
  27                P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
  28                P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
  29                P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
  30        };
  31        peripheral_request_list(pins, "smc0");
  32
  33        return 0;
  34}
  35
  36#ifdef CONFIG_DESIGNWARE_ETH
  37int board_eth_init(bd_t *bis)
  38{
  39        int ret = 0;
  40
  41        if (CONFIG_DW_PORTS & 1) {
  42                static const unsigned short pins[] = P_RMII0;
  43                if (!peripheral_request_list(pins, "emac0"))
  44                        ret += designware_initialize(EMAC0_MACCFG, 0);
  45        }
  46        if (CONFIG_DW_PORTS & 2) {
  47                static const unsigned short pins[] = P_RMII1;
  48                if (!peripheral_request_list(pins, "emac1"))
  49                        ret += designware_initialize(EMAC1_MACCFG, 0);
  50        }
  51
  52        return ret;
  53}
  54#endif
  55
  56#ifdef CONFIG_BFIN_SDH
  57int board_mmc_init(bd_t *bis)
  58{
  59        return bfin_mmc_init(bis);
  60}
  61#endif
  62
  63/* miscellaneous platform dependent initialisations */
  64int misc_init_r(void)
  65{
  66        printf("other init\n");
  67        return setup_board_switches();
  68}
  69