uboot/drivers/mmc/tegra_mmc.c
<<
>>
Prefs
   1/*
   2 * (C) Copyright 2009 SAMSUNG Electronics
   3 * Minkyu Kang <mk7.kang@samsung.com>
   4 * Jaehoon Chung <jh80.chung@samsung.com>
   5 * Portions Copyright 2011-2013 NVIDIA Corporation
   6 *
   7 * SPDX-License-Identifier:     GPL-2.0+
   8 */
   9
  10#include <bouncebuf.h>
  11#include <common.h>
  12#include <asm/gpio.h>
  13#include <asm/io.h>
  14#include <asm/arch/clock.h>
  15#include <asm/arch-tegra/clk_rst.h>
  16#include <asm/arch-tegra/mmc.h>
  17#include <asm/arch-tegra/tegra_mmc.h>
  18#include <mmc.h>
  19
  20DECLARE_GLOBAL_DATA_PTR;
  21
  22struct mmc_host mmc_host[CONFIG_SYS_MMC_MAX_DEVICE];
  23
  24#ifndef CONFIG_OF_CONTROL
  25#error "Please enable device tree support to use this driver"
  26#endif
  27
  28static void mmc_set_power(struct mmc_host *host, unsigned short power)
  29{
  30        u8 pwr = 0;
  31        debug("%s: power = %x\n", __func__, power);
  32
  33        if (power != (unsigned short)-1) {
  34                switch (1 << power) {
  35                case MMC_VDD_165_195:
  36                        pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8;
  37                        break;
  38                case MMC_VDD_29_30:
  39                case MMC_VDD_30_31:
  40                        pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0;
  41                        break;
  42                case MMC_VDD_32_33:
  43                case MMC_VDD_33_34:
  44                        pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3;
  45                        break;
  46                }
  47        }
  48        debug("%s: pwr = %X\n", __func__, pwr);
  49
  50        /* Set the bus voltage first (if any) */
  51        writeb(pwr, &host->reg->pwrcon);
  52        if (pwr == 0)
  53                return;
  54
  55        /* Now enable bus power */
  56        pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER;
  57        writeb(pwr, &host->reg->pwrcon);
  58}
  59
  60static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data,
  61                                struct bounce_buffer *bbstate)
  62{
  63        unsigned char ctrl;
  64
  65
  66        debug("buf: %p (%p), data->blocks: %u, data->blocksize: %u\n",
  67                bbstate->bounce_buffer, bbstate->user_buffer, data->blocks,
  68                data->blocksize);
  69
  70        writel((u32)bbstate->bounce_buffer, &host->reg->sysad);
  71        /*
  72         * DMASEL[4:3]
  73         * 00 = Selects SDMA
  74         * 01 = Reserved
  75         * 10 = Selects 32-bit Address ADMA2
  76         * 11 = Selects 64-bit Address ADMA2
  77         */
  78        ctrl = readb(&host->reg->hostctl);
  79        ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
  80        ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
  81        writeb(ctrl, &host->reg->hostctl);
  82
  83        /* We do not handle DMA boundaries, so set it to max (512 KiB) */
  84        writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
  85        writew(data->blocks, &host->reg->blkcnt);
  86}
  87
  88static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
  89{
  90        unsigned short mode;
  91        debug(" mmc_set_transfer_mode called\n");
  92        /*
  93         * TRNMOD
  94         * MUL1SIN0[5]  : Multi/Single Block Select
  95         * RD1WT0[4]    : Data Transfer Direction Select
  96         *      1 = read
  97         *      0 = write
  98         * ENACMD12[2]  : Auto CMD12 Enable
  99         * ENBLKCNT[1]  : Block Count Enable
 100         * ENDMA[0]     : DMA Enable
 101         */
 102        mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
 103                TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
 104
 105        if (data->blocks > 1)
 106                mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
 107
 108        if (data->flags & MMC_DATA_READ)
 109                mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
 110
 111        writew(mode, &host->reg->trnmod);
 112}
 113
 114static int mmc_wait_inhibit(struct mmc_host *host,
 115                            struct mmc_cmd *cmd,
 116                            struct mmc_data *data,
 117                            unsigned int timeout)
 118{
 119        /*
 120         * PRNSTS
 121         * CMDINHDAT[1] : Command Inhibit (DAT)
 122         * CMDINHCMD[0] : Command Inhibit (CMD)
 123         */
 124        unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
 125
 126        /*
 127         * We shouldn't wait for data inhibit for stop commands, even
 128         * though they might use busy signaling
 129         */
 130        if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
 131                mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
 132
 133        while (readl(&host->reg->prnsts) & mask) {
 134                if (timeout == 0) {
 135                        printf("%s: timeout error\n", __func__);
 136                        return -1;
 137                }
 138                timeout--;
 139                udelay(1000);
 140        }
 141
 142        return 0;
 143}
 144
 145static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd,
 146                        struct mmc_data *data, struct bounce_buffer *bbstate)
 147{
 148        struct mmc_host *host = mmc->priv;
 149        int flags, i;
 150        int result;
 151        unsigned int mask = 0;
 152        unsigned int retry = 0x100000;
 153        debug(" mmc_send_cmd called\n");
 154
 155        result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */);
 156
 157        if (result < 0)
 158                return result;
 159
 160        if (data)
 161                mmc_prepare_data(host, data, bbstate);
 162
 163        debug("cmd->arg: %08x\n", cmd->cmdarg);
 164        writel(cmd->cmdarg, &host->reg->argument);
 165
 166        if (data)
 167                mmc_set_transfer_mode(host, data);
 168
 169        if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
 170                return -1;
 171
 172        /*
 173         * CMDREG
 174         * CMDIDX[13:8] : Command index
 175         * DATAPRNT[5]  : Data Present Select
 176         * ENCMDIDX[4]  : Command Index Check Enable
 177         * ENCMDCRC[3]  : Command CRC Check Enable
 178         * RSPTYP[1:0]
 179         *      00 = No Response
 180         *      01 = Length 136
 181         *      10 = Length 48
 182         *      11 = Length 48 Check busy after response
 183         */
 184        if (!(cmd->resp_type & MMC_RSP_PRESENT))
 185                flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
 186        else if (cmd->resp_type & MMC_RSP_136)
 187                flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
 188        else if (cmd->resp_type & MMC_RSP_BUSY)
 189                flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
 190        else
 191                flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
 192
 193        if (cmd->resp_type & MMC_RSP_CRC)
 194                flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
 195        if (cmd->resp_type & MMC_RSP_OPCODE)
 196                flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
 197        if (data)
 198                flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
 199
 200        debug("cmd: %d\n", cmd->cmdidx);
 201
 202        writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
 203
 204        for (i = 0; i < retry; i++) {
 205                mask = readl(&host->reg->norintsts);
 206                /* Command Complete */
 207                if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
 208                        if (!data)
 209                                writel(mask, &host->reg->norintsts);
 210                        break;
 211                }
 212        }
 213
 214        if (i == retry) {
 215                printf("%s: waiting for status update\n", __func__);
 216                writel(mask, &host->reg->norintsts);
 217                return TIMEOUT;
 218        }
 219
 220        if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
 221                /* Timeout Error */
 222                debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
 223                writel(mask, &host->reg->norintsts);
 224                return TIMEOUT;
 225        } else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
 226                /* Error Interrupt */
 227                debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
 228                writel(mask, &host->reg->norintsts);
 229                return -1;
 230        }
 231
 232        if (cmd->resp_type & MMC_RSP_PRESENT) {
 233                if (cmd->resp_type & MMC_RSP_136) {
 234                        /* CRC is stripped so we need to do some shifting. */
 235                        for (i = 0; i < 4; i++) {
 236                                unsigned int offset =
 237                                        (unsigned int)(&host->reg->rspreg3 - i);
 238                                cmd->response[i] = readl(offset) << 8;
 239
 240                                if (i != 3) {
 241                                        cmd->response[i] |=
 242                                                readb(offset - 1);
 243                                }
 244                                debug("cmd->resp[%d]: %08x\n",
 245                                                i, cmd->response[i]);
 246                        }
 247                } else if (cmd->resp_type & MMC_RSP_BUSY) {
 248                        for (i = 0; i < retry; i++) {
 249                                /* PRNTDATA[23:20] : DAT[3:0] Line Signal */
 250                                if (readl(&host->reg->prnsts)
 251                                        & (1 << 20))    /* DAT[0] */
 252                                        break;
 253                        }
 254
 255                        if (i == retry) {
 256                                printf("%s: card is still busy\n", __func__);
 257                                writel(mask, &host->reg->norintsts);
 258                                return TIMEOUT;
 259                        }
 260
 261                        cmd->response[0] = readl(&host->reg->rspreg0);
 262                        debug("cmd->resp[0]: %08x\n", cmd->response[0]);
 263                } else {
 264                        cmd->response[0] = readl(&host->reg->rspreg0);
 265                        debug("cmd->resp[0]: %08x\n", cmd->response[0]);
 266                }
 267        }
 268
 269        if (data) {
 270                unsigned long   start = get_timer(0);
 271
 272                while (1) {
 273                        mask = readl(&host->reg->norintsts);
 274
 275                        if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
 276                                /* Error Interrupt */
 277                                writel(mask, &host->reg->norintsts);
 278                                printf("%s: error during transfer: 0x%08x\n",
 279                                                __func__, mask);
 280                                return -1;
 281                        } else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
 282                                /*
 283                                 * DMA Interrupt, restart the transfer where
 284                                 * it was interrupted.
 285                                 */
 286                                unsigned int address = readl(&host->reg->sysad);
 287
 288                                debug("DMA end\n");
 289                                writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
 290                                       &host->reg->norintsts);
 291                                writel(address, &host->reg->sysad);
 292                        } else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
 293                                /* Transfer Complete */
 294                                debug("r/w is done\n");
 295                                break;
 296                        } else if (get_timer(start) > 8000UL) {
 297                                writel(mask, &host->reg->norintsts);
 298                                printf("%s: MMC Timeout\n"
 299                                       "    Interrupt status        0x%08x\n"
 300                                       "    Interrupt status enable 0x%08x\n"
 301                                       "    Interrupt signal enable 0x%08x\n"
 302                                       "    Present status          0x%08x\n",
 303                                       __func__, mask,
 304                                       readl(&host->reg->norintstsen),
 305                                       readl(&host->reg->norintsigen),
 306                                       readl(&host->reg->prnsts));
 307                                return -1;
 308                        }
 309                }
 310                writel(mask, &host->reg->norintsts);
 311        }
 312
 313        udelay(1000);
 314        return 0;
 315}
 316
 317static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 318                        struct mmc_data *data)
 319{
 320        void *buf;
 321        unsigned int bbflags;
 322        size_t len;
 323        struct bounce_buffer bbstate;
 324        int ret;
 325
 326        if (data) {
 327                if (data->flags & MMC_DATA_READ) {
 328                        buf = data->dest;
 329                        bbflags = GEN_BB_WRITE;
 330                } else {
 331                        buf = (void *)data->src;
 332                        bbflags = GEN_BB_READ;
 333                }
 334                len = data->blocks * data->blocksize;
 335
 336                bounce_buffer_start(&bbstate, buf, len, bbflags);
 337        }
 338
 339        ret = mmc_send_cmd_bounced(mmc, cmd, data, &bbstate);
 340
 341        if (data)
 342                bounce_buffer_stop(&bbstate);
 343
 344        return ret;
 345}
 346
 347static void mmc_change_clock(struct mmc_host *host, uint clock)
 348{
 349        int div;
 350        unsigned short clk;
 351        unsigned long timeout;
 352
 353        debug(" mmc_change_clock called\n");
 354
 355        /*
 356         * Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0
 357         */
 358        if (clock == 0)
 359                goto out;
 360        clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
 361                                    &div);
 362        debug("div = %d\n", div);
 363
 364        writew(0, &host->reg->clkcon);
 365
 366        /*
 367         * CLKCON
 368         * SELFREQ[15:8]        : base clock divided by value
 369         * ENSDCLK[2]           : SD Clock Enable
 370         * STBLINTCLK[1]        : Internal Clock Stable
 371         * ENINTCLK[0]          : Internal Clock Enable
 372         */
 373        div >>= 1;
 374        clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
 375               TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
 376        writew(clk, &host->reg->clkcon);
 377
 378        /* Wait max 10 ms */
 379        timeout = 10;
 380        while (!(readw(&host->reg->clkcon) &
 381                 TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
 382                if (timeout == 0) {
 383                        printf("%s: timeout error\n", __func__);
 384                        return;
 385                }
 386                timeout--;
 387                udelay(1000);
 388        }
 389
 390        clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
 391        writew(clk, &host->reg->clkcon);
 392
 393        debug("mmc_change_clock: clkcon = %08X\n", clk);
 394
 395out:
 396        host->clock = clock;
 397}
 398
 399static void tegra_mmc_set_ios(struct mmc *mmc)
 400{
 401        struct mmc_host *host = mmc->priv;
 402        unsigned char ctrl;
 403        debug(" mmc_set_ios called\n");
 404
 405        debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
 406
 407        /* Change clock first */
 408        mmc_change_clock(host, mmc->clock);
 409
 410        ctrl = readb(&host->reg->hostctl);
 411
 412        /*
 413         * WIDE8[5]
 414         * 0 = Depend on WIDE4
 415         * 1 = 8-bit mode
 416         * WIDE4[1]
 417         * 1 = 4-bit mode
 418         * 0 = 1-bit mode
 419         */
 420        if (mmc->bus_width == 8)
 421                ctrl |= (1 << 5);
 422        else if (mmc->bus_width == 4)
 423                ctrl |= (1 << 1);
 424        else
 425                ctrl &= ~(1 << 1);
 426
 427        writeb(ctrl, &host->reg->hostctl);
 428        debug("mmc_set_ios: hostctl = %08X\n", ctrl);
 429}
 430
 431static void mmc_reset(struct mmc_host *host, struct mmc *mmc)
 432{
 433        unsigned int timeout;
 434        debug(" mmc_reset called\n");
 435
 436        /*
 437         * RSTALL[0] : Software reset for all
 438         * 1 = reset
 439         * 0 = work
 440         */
 441        writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst);
 442
 443        host->clock = 0;
 444
 445        /* Wait max 100 ms */
 446        timeout = 100;
 447
 448        /* hw clears the bit when it's done */
 449        while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
 450                if (timeout == 0) {
 451                        printf("%s: timeout error\n", __func__);
 452                        return;
 453                }
 454                timeout--;
 455                udelay(1000);
 456        }
 457
 458        /* Set SD bus voltage & enable bus power */
 459        mmc_set_power(host, fls(mmc->cfg->voltages) - 1);
 460        debug("%s: power control = %02X, host control = %02X\n", __func__,
 461                readb(&host->reg->pwrcon), readb(&host->reg->hostctl));
 462
 463        /* Make sure SDIO pads are set up */
 464        pad_init_mmc(host);
 465}
 466
 467static int tegra_mmc_core_init(struct mmc *mmc)
 468{
 469        struct mmc_host *host = mmc->priv;
 470        unsigned int mask;
 471        debug(" mmc_core_init called\n");
 472
 473        mmc_reset(host, mmc);
 474
 475        host->version = readw(&host->reg->hcver);
 476        debug("host version = %x\n", host->version);
 477
 478        /* mask all */
 479        writel(0xffffffff, &host->reg->norintstsen);
 480        writel(0xffffffff, &host->reg->norintsigen);
 481
 482        writeb(0xe, &host->reg->timeoutcon);    /* TMCLK * 2^27 */
 483        /*
 484         * NORMAL Interrupt Status Enable Register init
 485         * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
 486         * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
 487         * [3] ENSTADMAINT   : DMA boundary interrupt
 488         * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
 489         * [0] ENSTACMDCMPLT : Command Complete Status Enable
 490        */
 491        mask = readl(&host->reg->norintstsen);
 492        mask &= ~(0xffff);
 493        mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
 494                 TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
 495                 TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
 496                 TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
 497                 TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
 498        writel(mask, &host->reg->norintstsen);
 499
 500        /*
 501         * NORMAL Interrupt Signal Enable Register init
 502         * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
 503         */
 504        mask = readl(&host->reg->norintsigen);
 505        mask &= ~(0xffff);
 506        mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
 507        writel(mask, &host->reg->norintsigen);
 508
 509        return 0;
 510}
 511
 512static int tegra_mmc_getcd(struct mmc *mmc)
 513{
 514        struct mmc_host *host = mmc->priv;
 515
 516        debug("tegra_mmc_getcd called\n");
 517
 518        if (dm_gpio_is_valid(&host->cd_gpio))
 519                return dm_gpio_get_value(&host->cd_gpio);
 520
 521        return 1;
 522}
 523
 524static const struct mmc_ops tegra_mmc_ops = {
 525        .send_cmd       = tegra_mmc_send_cmd,
 526        .set_ios        = tegra_mmc_set_ios,
 527        .init           = tegra_mmc_core_init,
 528        .getcd          = tegra_mmc_getcd,
 529};
 530
 531static int do_mmc_init(int dev_index)
 532{
 533        struct mmc_host *host;
 534        struct mmc *mmc;
 535
 536        /* DT should have been read & host config filled in */
 537        host = &mmc_host[dev_index];
 538        if (!host->enabled)
 539                return -1;
 540
 541        debug(" do_mmc_init: index %d, bus width %d pwr_gpio %d cd_gpio %d\n",
 542              dev_index, host->width, gpio_get_number(&host->pwr_gpio),
 543              gpio_get_number(&host->cd_gpio));
 544
 545        host->clock = 0;
 546        clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
 547
 548        if (dm_gpio_is_valid(&host->pwr_gpio))
 549                dm_gpio_set_value(&host->pwr_gpio, 1);
 550
 551        memset(&host->cfg, 0, sizeof(host->cfg));
 552
 553        host->cfg.name = "Tegra SD/MMC";
 554        host->cfg.ops = &tegra_mmc_ops;
 555
 556        host->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 557        host->cfg.host_caps = 0;
 558        if (host->width == 8)
 559                host->cfg.host_caps |= MMC_MODE_8BIT;
 560        if (host->width >= 4)
 561                host->cfg.host_caps |= MMC_MODE_4BIT;
 562        host->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
 563
 564        /*
 565         * min freq is for card identification, and is the highest
 566         *  low-speed SDIO card frequency (actually 400KHz)
 567         * max freq is highest HS eMMC clock as per the SD/MMC spec
 568         *  (actually 52MHz)
 569         */
 570        host->cfg.f_min = 375000;
 571        host->cfg.f_max = 48000000;
 572
 573        host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 574
 575        mmc = mmc_create(&host->cfg, host);
 576        if (mmc == NULL)
 577                return -1;
 578
 579        return 0;
 580}
 581
 582/**
 583 * Get the host address and peripheral ID for a node.
 584 *
 585 * @param blob          fdt blob
 586 * @param node          Device index (0-3)
 587 * @param host          Structure to fill in (reg, width, mmc_id)
 588 */
 589static int mmc_get_config(const void *blob, int node, struct mmc_host *host)
 590{
 591        debug("%s: node = %d\n", __func__, node);
 592
 593        host->enabled = fdtdec_get_is_enabled(blob, node);
 594
 595        host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg");
 596        if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) {
 597                debug("%s: no sdmmc base reg info found\n", __func__);
 598                return -FDT_ERR_NOTFOUND;
 599        }
 600
 601        host->mmc_id = clock_decode_periph_id(blob, node);
 602        if (host->mmc_id == PERIPH_ID_NONE) {
 603                debug("%s: could not decode periph id\n", __func__);
 604                return -FDT_ERR_NOTFOUND;
 605        }
 606
 607        /*
 608         * NOTE: mmc->bus_width is determined by mmc.c dynamically.
 609         * TBD: Override it with this value?
 610         */
 611        host->width = fdtdec_get_int(blob, node, "bus-width", 0);
 612        if (!host->width)
 613                debug("%s: no sdmmc width found\n", __func__);
 614
 615        /* These GPIOs are optional */
 616        gpio_request_by_name_nodev(blob, node, "cd-gpios", 0, &host->cd_gpio,
 617                                   GPIOD_IS_IN);
 618        gpio_request_by_name_nodev(blob, node, "wp-gpios", 0, &host->wp_gpio,
 619                                   GPIOD_IS_IN);
 620        gpio_request_by_name_nodev(blob, node, "power-gpios", 0,
 621                                   &host->pwr_gpio, GPIOD_IS_OUT);
 622
 623        debug("%s: found controller at %p, width = %d, periph_id = %d\n",
 624                __func__, host->reg, host->width, host->mmc_id);
 625        return 0;
 626}
 627
 628/*
 629 * Process a list of nodes, adding them to our list of SDMMC ports.
 630 *
 631 * @param blob          fdt blob
 632 * @param node_list     list of nodes to process (any <=0 are ignored)
 633 * @param count         number of nodes to process
 634 * @return 0 if ok, -1 on error
 635 */
 636static int process_nodes(const void *blob, int node_list[], int count)
 637{
 638        struct mmc_host *host;
 639        int i, node;
 640
 641        debug("%s: count = %d\n", __func__, count);
 642
 643        /* build mmc_host[] for each controller */
 644        for (i = 0; i < count; i++) {
 645                node = node_list[i];
 646                if (node <= 0)
 647                        continue;
 648
 649                host = &mmc_host[i];
 650                host->id = i;
 651
 652                if (mmc_get_config(blob, node, host)) {
 653                        printf("%s: failed to decode dev %d\n", __func__, i);
 654                        return -1;
 655                }
 656                do_mmc_init(i);
 657        }
 658        return 0;
 659}
 660
 661void tegra_mmc_init(void)
 662{
 663        int node_list[CONFIG_SYS_MMC_MAX_DEVICE], count;
 664        const void *blob = gd->fdt_blob;
 665        debug("%s entry\n", __func__);
 666
 667        /* See if any Tegra124 MMC controllers are present */
 668        count = fdtdec_find_aliases_for_id(blob, "sdhci",
 669                COMPAT_NVIDIA_TEGRA124_SDMMC, node_list,
 670                CONFIG_SYS_MMC_MAX_DEVICE);
 671        debug("%s: count of Tegra124 sdhci nodes is %d\n", __func__, count);
 672        if (process_nodes(blob, node_list, count)) {
 673                printf("%s: Error processing T30 mmc node(s)!\n", __func__);
 674                return;
 675        }
 676
 677        /* See if any Tegra30 MMC controllers are present */
 678        count = fdtdec_find_aliases_for_id(blob, "sdhci",
 679                COMPAT_NVIDIA_TEGRA30_SDMMC, node_list,
 680                CONFIG_SYS_MMC_MAX_DEVICE);
 681        debug("%s: count of T30 sdhci nodes is %d\n", __func__, count);
 682        if (process_nodes(blob, node_list, count)) {
 683                printf("%s: Error processing T30 mmc node(s)!\n", __func__);
 684                return;
 685        }
 686
 687        /* Now look for any Tegra20 MMC controllers */
 688        count = fdtdec_find_aliases_for_id(blob, "sdhci",
 689                COMPAT_NVIDIA_TEGRA20_SDMMC, node_list,
 690                CONFIG_SYS_MMC_MAX_DEVICE);
 691        debug("%s: count of T20 sdhci nodes is %d\n", __func__, count);
 692        if (process_nodes(blob, node_list, count)) {
 693                printf("%s: Error processing T20 mmc node(s)!\n", __func__);
 694                return;
 695        }
 696}
 697