1/* 2 * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7/************************************************************************ 8 * 1 january 2005 Alain Saurel <asaurel@amcc.com> 9 * Adapted to current Das U-Boot source 10 ***********************************************************************/ 11/************************************************************************ 12 * yucca.h - configuration for AMCC 440SPe Ref (yucca) 13 ***********************************************************************/ 14 15#ifndef __CONFIG_H 16#define __CONFIG_H 17 18/*----------------------------------------------------------------------- 19 * High Level Configuration Options 20 *----------------------------------------------------------------------*/ 21#define CONFIG_440 1 /* ... PPC440 family */ 22#define CONFIG_440SPE 1 /* Specifc SPe support */ 23#define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ 24#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 25#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ 26#define EXTCLK_33_33 33333333 27#define EXTCLK_66_66 66666666 28#define EXTCLK_50 50000000 29#define EXTCLK_83 83333333 30 31#define CONFIG_SYS_TEXT_BASE 0xfffb0000 32 33/* 34 * Include common defines/options for all AMCC eval boards 35 */ 36#define CONFIG_HOSTNAME yucca 37#include "amcc-common.h" 38 39#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ 40#undef CONFIG_SHOW_BOOT_PROGRESS 41#undef CONFIG_STRESS 42 43/*----------------------------------------------------------------------- 44 * Base addresses -- Note these are effective addresses where the 45 * actual resources get mapped (not physical addresses) 46 *----------------------------------------------------------------------*/ 47#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ 48#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ 49 50#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ 51#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ 52#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE 53 54#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ 55#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* smallest incr for PCIe port */ 56#define CONFIG_SYS_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ 57 58#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000 59#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000 60#define CONFIG_SYS_PCIE2_CFGBASE 0xc2000000 61#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000 62#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000 63#define CONFIG_SYS_PCIE2_XCFGBASE 0xc3002000 64 65/* base address of inbound PCIe window */ 66#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000400000000ULL 67 68/* System RAM mapped to PCI space */ 69#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE 70#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE 71#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) 72 73#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */ 74#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ 75 76/* #define CONFIG_SYS_NVRAM_BASE_ADDR 0x08000000 */ 77/*----------------------------------------------------------------------- 78 * Initial RAM & stack pointer (placed in internal SRAM) 79 *----------------------------------------------------------------------*/ 80#define CONFIG_SYS_TEMP_STACK_OCM 1 81#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE 82#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ 83#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ 84 85#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 86#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) 87 88/*----------------------------------------------------------------------- 89 * Serial Port 90 *----------------------------------------------------------------------*/ 91#define CONFIG_CONS_INDEX 1 /* Use UART0 */ 92 93#undef CONFIG_SYS_EXT_SERIAL_CLOCK 94/* #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */ 95 96/*----------------------------------------------------------------------- 97 * DDR SDRAM 98 *----------------------------------------------------------------------*/ 99#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ 100#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ 101#define CONFIG_DDR_ECC 1 /* with ECC support */ 102 103/*----------------------------------------------------------------------- 104 * I2C 105 *----------------------------------------------------------------------*/ 106#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 107 108#define IIC0_BOOTPROM_ADDR 0x50 109#define IIC0_ALT_BOOTPROM_ADDR 0x54 110 111/* Don't probe these addrs */ 112#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} } 113 114/* #if defined(CONFIG_CMD_EEPROM) */ 115/* #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ 116#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ 117/* #endif */ 118 119/*----------------------------------------------------------------------- 120 * Environment 121 *----------------------------------------------------------------------*/ 122/* #define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) */ /* NVRAM size(8k)- RTC regs */ 123 124#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ 125#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ 126#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ 127#define CONFIG_ENV_OVERWRITE 1 128 129/* 130 * Default environment variables 131 */ 132#define CONFIG_EXTRA_ENV_SETTINGS \ 133 CONFIG_AMCC_DEF_ENV \ 134 CONFIG_AMCC_DEF_ENV_PPC \ 135 CONFIG_AMCC_DEF_ENV_NOR_UPD \ 136 "kernel_addr=E7F10000\0" \ 137 "ramdisk_addr=E7F20000\0" \ 138 "pciconfighost=1\0" \ 139 "pcie_mode=RP:EP:EP\0" \ 140 "" 141 142/* 143 * Commands additional to the ones defined in amcc-common.h 144 */ 145#define CONFIG_CMD_PCI 146#define CONFIG_CMD_SDRAM 147 148#define CONFIG_IBM_EMAC4_V4 1 149#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ 150#define CONFIG_HAS_ETH0 151#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ 152#define CONFIG_PHY_RESET_DELAY 1000 153#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ 154#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 155 156/*----------------------------------------------------------------------- 157 * FLASH related 158 *----------------------------------------------------------------------*/ 159#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */ 160#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ 161 162#undef CONFIG_SYS_FLASH_CHECKSUM 163#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 164#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 165 166#define CONFIG_SYS_FLASH_ADDR0 0x5555 167#define CONFIG_SYS_FLASH_ADDR1 0x2aaa 168#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char 169 170#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* evb440SPe has 8 and 16bit device */ 171#define CONFIG_SYS_FLASH_2ND_ADDR 0xe7c00000 /* evb440SPe has 8 and 16bit device*/ 172 173#ifdef CONFIG_ENV_IS_IN_FLASH 174#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ 175#define CONFIG_ENV_ADDR 0xfffa0000 176/* #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) */ 177#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */ 178#endif /* CONFIG_ENV_IS_IN_FLASH */ 179/*----------------------------------------------------------------------- 180 * PCI stuff 181 *----------------------------------------------------------------------- 182 */ 183/* General PCI */ 184#define CONFIG_PCI /* include pci support */ 185#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 186#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ 187#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ 188#define CONFIG_PCI_CONFIG_HOST_BRIDGE 189 190/* Board-specific PCI */ 191#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ 192#undef CONFIG_SYS_PCI_MASTER_INIT 193 194#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ 195#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ 196/* #define CONFIG_SYS_PCI_SUBSYS_ID CONFIG_SYS_PCI_SUBSYS_DEVICEID */ 197 198/* 199 * NETWORK Support (PCI): 200 */ 201/* Support for Intel 82557/82559/82559ER chips. */ 202#define CONFIG_EEPRO100 203 204/* FB Divisor selection */ 205#define FPGA_FB_DIV_6 6 206#define FPGA_FB_DIV_10 10 207#define FPGA_FB_DIV_12 12 208#define FPGA_FB_DIV_20 20 209 210/* VCO Divisor selection */ 211#define FPGA_VCO_DIV_4 4 212#define FPGA_VCO_DIV_6 6 213#define FPGA_VCO_DIV_8 8 214#define FPGA_VCO_DIV_10 10 215 216/*----------------------------------------------------------------------------+ 217| FPGA registers and bit definitions 218+----------------------------------------------------------------------------*/ 219/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */ 220/* TLB initialization makes it correspond to logical address 0xE2000000. */ 221/* => Done init_chip.s in bootlib */ 222#define FPGA_REG_BASE_ADDR 0xE2000000 223#define FPGA_GPIO_BASE_ADDR 0xE2010000 224#define FPGA_INT_BASE_ADDR 0xE2020000 225 226/*----------------------------------------------------------------------------+ 227| Display 228+----------------------------------------------------------------------------*/ 229#define PPC440SPE_DISPLAY FPGA_REG_BASE_ADDR 230 231#define PPC440SPE_DISPLAY_D8 (FPGA_REG_BASE_ADDR+0x06) 232#define PPC440SPE_DISPLAY_D4 (FPGA_REG_BASE_ADDR+0x04) 233#define PPC440SPE_DISPLAY_D2 (FPGA_REG_BASE_ADDR+0x02) 234#define PPC440SPE_DISPLAY_D1 (FPGA_REG_BASE_ADDR+0x00) 235/*define WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/ 236/*#define IOREG8(addr) *((volatile unsigned char *)(addr))*/ 237 238/*----------------------------------------------------------------------------+ 239| ethernet/reset/boot Register 1 240+----------------------------------------------------------------------------*/ 241#define FPGA_REG10 (FPGA_REG_BASE_ADDR+0x10) 242 243#define FPGA_REG10_10MHZ_ENABLE 0x8000 244#define FPGA_REG10_100MHZ_ENABLE 0x4000 245#define FPGA_REG10_GIGABIT_ENABLE 0x2000 246#define FPGA_REG10_FULL_DUPLEX 0x1000 /* force Full Duplex*/ 247#define FPGA_REG10_RESET_ETH 0x0800 248#define FPGA_REG10_AUTO_NEG_DIS 0x0400 249#define FPGA_REG10_INTP_ETH 0x0200 250 251#define FPGA_REG10_RESET_HISR 0x0080 252#define FPGA_REG10_ENABLE_DISPLAY 0x0040 253#define FPGA_REG10_RESET_SDRAM 0x0020 254#define FPGA_REG10_OPER_BOOT 0x0010 255#define FPGA_REG10_SRAM_BOOT 0x0008 256#define FPGA_REG10_SMALL_BOOT 0x0004 257#define FPGA_REG10_FORCE_COLA 0x0002 258#define FPGA_REG10_COLA_MANUAL 0x0001 259 260#define FPGA_REG10_SDRAM_ENABLE 0x0020 261 262#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/ 263#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/ 264 265/*----------------------------------------------------------------------------+ 266| MUX control 267+----------------------------------------------------------------------------*/ 268#define FPGA_REG12 (FPGA_REG_BASE_ADDR+0x12) 269 270#define FPGA_REG12_EBC_CTL 0x8000 271#define FPGA_REG12_UART1_CTS_RTS 0x4000 272#define FPGA_REG12_UART0_RX_ENABLE 0x2000 273#define FPGA_REG12_UART1_RX_ENABLE 0x1000 274#define FPGA_REG12_UART2_RX_ENABLE 0x0800 275#define FPGA_REG12_EBC_OUT_ENABLE 0x0400 276#define FPGA_REG12_GPIO0_OUT_ENABLE 0x0200 277#define FPGA_REG12_GPIO1_OUT_ENABLE 0x0100 278#define FPGA_REG12_GPIO_SELECT 0x0010 279#define FPGA_REG12_GPIO_CHREG 0x0008 280#define FPGA_REG12_GPIO_CLK_CHREG 0x0004 281#define FPGA_REG12_GPIO_OETRI 0x0002 282#define FPGA_REG12_EBC_ERROR 0x0001 283 284/*----------------------------------------------------------------------------+ 285| PCI Clock control 286+----------------------------------------------------------------------------*/ 287#define FPGA_REG16 (FPGA_REG_BASE_ADDR+0x16) 288 289#define FPGA_REG16_PCI_CLK_CTL0 0x8000 290#define FPGA_REG16_PCI_CLK_CTL1 0x4000 291#define FPGA_REG16_PCI_CLK_CTL2 0x2000 292#define FPGA_REG16_PCI_CLK_CTL3 0x1000 293#define FPGA_REG16_PCI_CLK_CTL4 0x0800 294#define FPGA_REG16_PCI_CLK_CTL5 0x0400 295#define FPGA_REG16_PCI_CLK_CTL6 0x0200 296#define FPGA_REG16_PCI_CLK_CTL7 0x0100 297#define FPGA_REG16_PCI_CLK_CTL8 0x0080 298#define FPGA_REG16_PCI_CLK_CTL9 0x0040 299#define FPGA_REG16_PCI_EXT_ARB0 0x0020 300#define FPGA_REG16_PCI_MODE_1 0x0010 301#define FPGA_REG16_PCI_TARGET_MODE 0x0008 302#define FPGA_REG16_PCI_INTP_MODE 0x0004 303 304/* FB1 Divisor selection */ 305#define FPGA_REG16_FB2_DIV_MASK 0x1000 306#define FPGA_REG16_FB2_DIV_LOW 0x0000 307#define FPGA_REG16_FB2_DIV_HIGH 0x1000 308/* FB2 Divisor selection */ 309/* S3 switch on Board */ 310#define FPGA_REG16_FB1_DIV_MASK 0x2000 311#define FPGA_REG16_FB1_DIV_LOW 0x0000 312#define FPGA_REG16_FB1_DIV_HIGH 0x2000 313/* PCI0 Clock Selection */ 314/* S3 switch on Board */ 315#define FPGA_REG16_PCI0_CLK_MASK 0x0c00 316#define FPGA_REG16_PCI0_CLK_33_33 0x0000 317#define FPGA_REG16_PCI0_CLK_66_66 0x0800 318#define FPGA_REG16_PCI0_CLK_100 0x0400 319#define FPGA_REG16_PCI0_CLK_133_33 0x0c00 320/* VCO Divisor selection */ 321/* S3 switch on Board */ 322#define FPGA_REG16_VCO_DIV_MASK 0xc000 323#define FPGA_REG16_VCO_DIV_4 0x0000 324#define FPGA_REG16_VCO_DIV_8 0x4000 325#define FPGA_REG16_VCO_DIV_6 0x8000 326#define FPGA_REG16_VCO_DIV_10 0xc000 327/* Master Clock Selection */ 328/* S3, S4 switches on Board */ 329#define FPGA_REG16_MASTER_CLK_MASK 0x01c0 330#define FPGA_REG16_MASTER_CLK_EXT 0x0000 331#define FPGA_REG16_MASTER_CLK_66_66 0x0040 332#define FPGA_REG16_MASTER_CLK_50 0x0080 333#define FPGA_REG16_MASTER_CLK_33_33 0x00c0 334#define FPGA_REG16_MASTER_CLK_25 0x0100 335 336/*----------------------------------------------------------------------------+ 337| PCI Miscellaneous 338+----------------------------------------------------------------------------*/ 339#define FPGA_REG18 (FPGA_REG_BASE_ADDR+0x18) 340 341#define FPGA_REG18_PCI_PRSNT1 0x8000 342#define FPGA_REG18_PCI_PRSNT2 0x4000 343#define FPGA_REG18_PCI_INTA 0x2000 344#define FPGA_REG18_PCI_SLOT0_INTP 0x1000 345#define FPGA_REG18_PCI_SLOT1_INTP 0x0800 346#define FPGA_REG18_PCI_SLOT2_INTP 0x0400 347#define FPGA_REG18_PCI_SLOT3_INTP 0x0200 348#define FPGA_REG18_PCI_PCI0_VC 0x0100 349#define FPGA_REG18_PCI_PCI0_VTH1 0x0080 350#define FPGA_REG18_PCI_PCI0_VTH2 0x0040 351#define FPGA_REG18_PCI_PCI0_VTH3 0x0020 352 353/*----------------------------------------------------------------------------+ 354| PCIe Miscellaneous 355+----------------------------------------------------------------------------*/ 356#define FPGA_REG1A (FPGA_REG_BASE_ADDR+0x1A) 357 358#define FPGA_REG1A_PE0_GLED 0x8000 359#define FPGA_REG1A_PE1_GLED 0x4000 360#define FPGA_REG1A_PE2_GLED 0x2000 361#define FPGA_REG1A_PE0_YLED 0x1000 362#define FPGA_REG1A_PE1_YLED 0x0800 363#define FPGA_REG1A_PE2_YLED 0x0400 364#define FPGA_REG1A_PE0_PWRON 0x0200 365#define FPGA_REG1A_PE1_PWRON 0x0100 366#define FPGA_REG1A_PE2_PWRON 0x0080 367#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 368#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 369#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 370#define FPGA_REG1A_PE_SPREAD0 0x0008 371#define FPGA_REG1A_PE_SPREAD1 0x0004 372#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 373#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 374 375#define FPGA_REG1A_GLED_ENCODE(n) (FPGA_REG1A_PE0_GLED >> (n)) 376#define FPGA_REG1A_YLED_ENCODE(n) (FPGA_REG1A_PE0_YLED >> (n)) 377#define FPGA_REG1A_PWRON_ENCODE(n) (FPGA_REG1A_PE0_PWRON >> (n)) 378#define FPGA_REG1A_REFCLK_ENCODE(n) (FPGA_REG1A_PE0_REFCLK_ENABLE >> (n)) 379 380/*----------------------------------------------------------------------------+ 381| PCIe Miscellaneous 382+----------------------------------------------------------------------------*/ 383#define FPGA_REG1C (FPGA_REG_BASE_ADDR+0x1C) 384 385#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 386#define FPGA_REG1C_PE1_ENDPOINT 0x4000 387#define FPGA_REG1C_PE2_ENDPOINT 0x2000 388#define FPGA_REG1C_PE0_PRSNT 0x1000 389#define FPGA_REG1C_PE1_PRSNT 0x0800 390#define FPGA_REG1C_PE2_PRSNT 0x0400 391#define FPGA_REG1C_PE0_WAKE 0x0080 392#define FPGA_REG1C_PE1_WAKE 0x0040 393#define FPGA_REG1C_PE2_WAKE 0x0020 394#define FPGA_REG1C_PE0_PERST 0x0010 395#define FPGA_REG1C_PE1_PERST 0x0008 396#define FPGA_REG1C_PE2_PERST 0x0004 397 398#define FPGA_REG1C_ROOTPOINT_ENCODE(n) (FPGA_REG1C_PE0_ROOTPOINT >> (n)) 399#define FPGA_REG1C_PERST_ENCODE(n) (FPGA_REG1C_PE0_PERST >> (n)) 400 401/*----------------------------------------------------------------------------+ 402| Defines 403+----------------------------------------------------------------------------*/ 404#define PERIOD_133_33MHZ 7500 /* 7,5ns */ 405#define PERIOD_100_00MHZ 10000 /* 10ns */ 406#define PERIOD_83_33MHZ 12000 /* 12ns */ 407#define PERIOD_75_00MHZ 13333 /* 13,333ns */ 408#define PERIOD_66_66MHZ 15000 /* 15ns */ 409#define PERIOD_50_00MHZ 20000 /* 20ns */ 410#define PERIOD_33_33MHZ 30000 /* 30ns */ 411#define PERIOD_25_00MHZ 40000 /* 40ns */ 412 413#endif /* __CONFIG_H */ 414