1/* 2 * (C) Copyright 2014 3 * Texas Instruments Incorporated. 4 * Felipe Balbi <balbi@ti.com> 5 * 6 * Configuration settings for the TI Beagle x15 board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12#ifndef __CONFIG_BEAGLE_X15_H 13#define __CONFIG_BEAGLE_X15_H 14 15#define CONFIG_AM57XX 16 17#ifdef CONFIG_SPL_BUILD 18#define CONFIG_IODELAY_RECALIBRATION 19#endif 20 21#define CONFIG_BOARD_EARLY_INIT_F 22 23#define CONFIG_NR_DRAM_BANKS 2 24 25#define CONFIG_ENV_SIZE (64 << 10) 26#define CONFIG_ENV_IS_IN_FAT 27#define FAT_ENV_INTERFACE "mmc" 28#define FAT_ENV_DEVICE_AND_PART "0:1" 29#define FAT_ENV_FILE "uboot.env" 30 31#define CONSOLEDEV "ttyO2" 32#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ 33#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ 34#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ 35#define CONFIG_BAUDRATE 115200 36 37#define CONFIG_SYS_OMAP_ABE_SYSCK 38 39/* Define the default GPT table for eMMC */ 40#define PARTS_DEFAULT \ 41 "uuid_disk=${uuid_gpt_disk};" \ 42 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 43 44#include <configs/ti_omap5_common.h> 45 46/* Enhance our eMMC support / experience. */ 47#define CONFIG_CMD_GPT 48#define CONFIG_EFI_PARTITION 49 50/* CPSW Ethernet */ 51#define CONFIG_CMD_DHCP 52#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 53#define CONFIG_BOOTP_DNS2 54#define CONFIG_BOOTP_SEND_HOSTNAME 55#define CONFIG_BOOTP_GATEWAY 56#define CONFIG_BOOTP_SUBNETMASK 57#define CONFIG_NET_RETRY_COUNT 10 58#define CONFIG_CMD_PING 59#define CONFIG_CMD_MII 60#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 61#define CONFIG_MII /* Required in net/eth.c */ 62#define CONFIG_PHY_GIGE /* per-board part of CPSW */ 63#define CONFIG_PHYLIB 64#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ 65 66#define CONFIG_SUPPORT_EMMC_BOOT 67 68/* USB xHCI HOST */ 69#define CONFIG_CMD_USB 70#define CONFIG_USB_HOST 71#define CONFIG_USB_XHCI_DWC3 72#define CONFIG_USB_XHCI 73#define CONFIG_USB_XHCI_OMAP 74#define CONFIG_USB_STORAGE 75#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 76 77#define CONFIG_OMAP_USB_PHY 78#define CONFIG_OMAP_USB3PHY1_HOST 79 80/* SATA */ 81#define CONFIG_BOARD_LATE_INIT 82#define CONFIG_CMD_SCSI 83#define CONFIG_LIBATA 84#define CONFIG_SCSI_AHCI 85#define CONFIG_SCSI_AHCI_PLAT 86#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 87#define CONFIG_SYS_SCSI_MAX_LUN 1 88#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 89 CONFIG_SYS_SCSI_MAX_LUN) 90 91#endif /* __CONFIG_BEAGLE_X5_H */ 92