LXR uboot/include/configs/goflexhome.h

   1/*
   2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
   3 *
   4 * Based on dockstar.h originally written by
   5 * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
   6 *
   7 * Based on sheevaplug.h originally written by
   8 * Prafulla Wadaskar <prafulla@marvell.com>
   9 * (C) Copyright 2009
  10 * Marvell Semiconductor <www.marvell.com>
  11 *
  12 * SPDX-License-Identifier:     GPL-2.0+
  13 */
  14
  15#ifndef _CONFIG_GOFLEXHOME_H
  16#define _CONFIG_GOFLEXHOME_H
  17
  18#define CONFIG_SYS_GENERIC_BOARD
  19
  20/*
  21 * Version number information
  22 */
  23#define CONFIG_IDENT_STRING     "\nSeagate GoFlex Home"
  24
  25/*
  26 * High Level Configuration Options (easy to change)
  27 */
  28#define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  29#define CONFIG_KW88F6281        1       /* SOC Name */
  30#define CONFIG_MACH_GOFLEXHOME          /* Machine type */
  31#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  32
  33/*
  34 * Default GPIO configuration and LED status
  35 */
  36#define GOFLEXHOME_OE_LOW               (~(0))
  37#define GOFLEXHOME_OE_HIGH              (~(0))
  38#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
  39#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
  40
  41/* PHY related */
  42#define MV88E1116_LED_FCTRL_REG         10
  43#define MV88E1116_CPRSP_CR3_REG         21
  44#define MV88E1116_MAC_CTRL_REG          21
  45#define MV88E1116_PGADR_REG             22
  46#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  47#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  48
  49/*
  50 * Commands configuration
  51 */
  52#define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  53#define CONFIG_CONSOLE_MUX
  54#define CONFIG_SYS_CONSOLE_IS_IN_ENV
  55
  56#define CONFIG_CMD_DHCP
  57#define CONFIG_CMD_ENV
  58#define CONFIG_CMD_MII
  59#define CONFIG_CMD_NAND
  60#define CONFIG_CMD_PING
  61#define CONFIG_CMD_USB
  62#define CONFIG_CMD_IDE
  63#define CONFIG_CMD_DATE
  64#define CONFIG_CMD_EXT4
  65#define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */
  66
  67/*
  68 * mv-common.h should be defined after CMD configs since it used them
  69 * to enable certain macros
  70 */
  71#include "mv-common.h"
  72
  73/*
  74 *  Environment variables configurations
  75 */
  76#ifdef CONFIG_CMD_NAND
  77#define CONFIG_ENV_IS_IN_NAND           1
  78#define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  79#else
  80#define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  81#endif
  82/*
  83 * max 4k env size is enough, but in case of nand
  84 * it has to be rounded to sector size
  85 */
  86#define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  87#define CONFIG_ENV_ADDR                 0xC0000
  88#define CONFIG_ENV_OFFSET               0xC0000 /* env starts here */
  89
  90/*
  91 * Default environment variables
  92 */
  93#define CONFIG_BOOTCOMMAND \
  94        "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
  95        "ubi part root; " \
  96        "ubifsmount ubi:root; " \
  97        "ubifsload 0x800000 ${kernel}; " \
  98        "bootm 0x800000"
  99
 100#define CONFIG_MTDPARTS \
 101        "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
 102
 103#define CONFIG_EXTRA_ENV_SETTINGS \
 104        "console=console=ttyS0,115200\0" \
 105        "mtdids=nand0=orion_nand\0" \
 106        "mtdparts="CONFIG_MTDPARTS \
 107        "kernel=/boot/uImage\0" \
 108        "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 109
 110/*
 111 * Ethernet Driver configuration
 112 */
 113#ifdef CONFIG_CMD_NET
 114#define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 115#define CONFIG_PHY_BASE_ADR     0
 116#endif /* CONFIG_CMD_NET */
 117
 118/*
 119 *  * SATA Driver configuration
 120 *   */
 121#ifdef CONFIG_MVSATA_IDE
 122#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 123#endif /*CONFIG_MVSATA_IDE*/
 124
 125/*
 126 *  * RTC driver configuration
 127 *   */
 128#ifdef CONFIG_CMD_DATE
 129#define CONFIG_RTC_MV
 130#endif /* CONFIG_CMD_DATE */
 131
 132#endif /* _CONFIG_GOFLEXHOME_H */
 133