uboot/common/cli_hush.c
<<
>>
Prefs
   1/*
   2 * sh.c -- a prototype Bourne shell grammar parser
   3 *      Intended to follow the original Thompson and Ritchie
   4 *      "small and simple is beautiful" philosophy, which
   5 *      incidentally is a good match to today's BusyBox.
   6 *
   7 * Copyright (C) 2000,2001  Larry Doolittle  <larry@doolittle.boa.org>
   8 *
   9 * Credits:
  10 *      The parser routines proper are all original material, first
  11 *      written Dec 2000 and Jan 2001 by Larry Doolittle.
  12 *      The execution engine, the builtins, and much of the underlying
  13 *      support has been adapted from busybox-0.49pre's lash,
  14 *      which is Copyright (C) 2000 by Lineo, Inc., and
  15 *      written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
  16 *      That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
  17 *      Erik W. Troan, which they placed in the public domain.  I don't know
  18 *      how much of the Johnson/Troan code has survived the repeated rewrites.
  19 * Other credits:
  20 *      b_addchr() derived from similar w_addchar function in glibc-2.2
  21 *      setup_redirect(), redirect_opt_num(), and big chunks of main()
  22 *        and many builtins derived from contributions by Erik Andersen
  23 *      miscellaneous bugfixes from Matt Kraai
  24 *
  25 * There are two big (and related) architecture differences between
  26 * this parser and the lash parser.  One is that this version is
  27 * actually designed from the ground up to understand nearly all
  28 * of the Bourne grammar.  The second, consequential change is that
  29 * the parser and input reader have been turned inside out.  Now,
  30 * the parser is in control, and asks for input as needed.  The old
  31 * way had the input reader in control, and it asked for parsing to
  32 * take place as needed.  The new way makes it much easier to properly
  33 * handle the recursion implicit in the various substitutions, especially
  34 * across continuation lines.
  35 *
  36 * Bash grammar not implemented: (how many of these were in original sh?)
  37 *      $@ (those sure look like weird quoting rules)
  38 *      $_
  39 *      ! negation operator for pipes
  40 *      &> and >& redirection of stdout+stderr
  41 *      Brace Expansion
  42 *      Tilde Expansion
  43 *      fancy forms of Parameter Expansion
  44 *      aliases
  45 *      Arithmetic Expansion
  46 *      <(list) and >(list) Process Substitution
  47 *      reserved words: case, esac, select, function
  48 *      Here Documents ( << word )
  49 *      Functions
  50 * Major bugs:
  51 *      job handling woefully incomplete and buggy
  52 *      reserved word execution woefully incomplete and buggy
  53 * to-do:
  54 *      port selected bugfixes from post-0.49 busybox lash - done?
  55 *      finish implementing reserved words: for, while, until, do, done
  56 *      change { and } from special chars to reserved words
  57 *      builtins: break, continue, eval, return, set, trap, ulimit
  58 *      test magic exec
  59 *      handle children going into background
  60 *      clean up recognition of null pipes
  61 *      check setting of global_argc and global_argv
  62 *      control-C handling, probably with longjmp
  63 *      follow IFS rules more precisely, including update semantics
  64 *      figure out what to do with backslash-newline
  65 *      explain why we use signal instead of sigaction
  66 *      propagate syntax errors, die on resource errors?
  67 *      continuation lines, both explicit and implicit - done?
  68 *      memory leak finding and plugging - done?
  69 *      more testing, especially quoting rules and redirection
  70 *      document how quoting rules not precisely followed for variable assignments
  71 *      maybe change map[] to use 2-bit entries
  72 *      (eventually) remove all the printf's
  73 *
  74 * SPDX-License-Identifier:     GPL-2.0+
  75 */
  76
  77#define __U_BOOT__
  78#ifdef __U_BOOT__
  79#include <malloc.h>         /* malloc, free, realloc*/
  80#include <linux/ctype.h>    /* isalpha, isdigit */
  81#include <common.h>        /* readline */
  82#include <console.h>
  83#include <bootretry.h>
  84#include <cli.h>
  85#include <cli_hush.h>
  86#include <command.h>        /* find_cmd */
  87#ifndef CONFIG_SYS_PROMPT_HUSH_PS2
  88#define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  89#endif
  90#endif
  91#ifndef __U_BOOT__
  92#include <ctype.h>     /* isalpha, isdigit */
  93#include <unistd.h>    /* getpid */
  94#include <stdlib.h>    /* getenv, atoi */
  95#include <string.h>    /* strchr */
  96#include <stdio.h>     /* popen etc. */
  97#include <glob.h>      /* glob, of course */
  98#include <stdarg.h>    /* va_list */
  99#include <errno.h>
 100#include <fcntl.h>
 101#include <getopt.h>    /* should be pretty obvious */
 102
 103#include <sys/stat.h>  /* ulimit */
 104#include <sys/types.h>
 105#include <sys/wait.h>
 106#include <signal.h>
 107
 108/* #include <dmalloc.h> */
 109
 110#if 1
 111#include "busybox.h"
 112#include "cmdedit.h"
 113#else
 114#define applet_name "hush"
 115#include "standalone.h"
 116#define hush_main main
 117#undef CONFIG_FEATURE_SH_FANCY_PROMPT
 118#define BB_BANNER
 119#endif
 120#endif
 121#define SPECIAL_VAR_SYMBOL 03
 122#define SUBSTED_VAR_SYMBOL 04
 123#ifndef __U_BOOT__
 124#define FLAG_EXIT_FROM_LOOP 1
 125#define FLAG_PARSE_SEMICOLON (1 << 1)           /* symbol ';' is special for parser */
 126#define FLAG_REPARSING       (1 << 2)           /* >= 2nd pass */
 127
 128#endif
 129
 130#ifdef __U_BOOT__
 131DECLARE_GLOBAL_DATA_PTR;
 132
 133#define EXIT_SUCCESS 0
 134#define EOF -1
 135#define syntax() syntax_err()
 136#define xstrdup strdup
 137#define error_msg printf
 138#else
 139typedef enum {
 140        REDIRECT_INPUT     = 1,
 141        REDIRECT_OVERWRITE = 2,
 142        REDIRECT_APPEND    = 3,
 143        REDIRECT_HEREIS    = 4,
 144        REDIRECT_IO        = 5
 145} redir_type;
 146
 147/* The descrip member of this structure is only used to make debugging
 148 * output pretty */
 149struct {int mode; int default_fd; char *descrip;} redir_table[] = {
 150        { 0,                         0, "()" },
 151        { O_RDONLY,                  0, "<"  },
 152        { O_CREAT|O_TRUNC|O_WRONLY,  1, ">"  },
 153        { O_CREAT|O_APPEND|O_WRONLY, 1, ">>" },
 154        { O_RDONLY,                 -1, "<<" },
 155        { O_RDWR,                    1, "<>" }
 156};
 157#endif
 158
 159typedef enum {
 160        PIPE_SEQ = 1,
 161        PIPE_AND = 2,
 162        PIPE_OR  = 3,
 163        PIPE_BG  = 4,
 164} pipe_style;
 165
 166/* might eventually control execution */
 167typedef enum {
 168        RES_NONE  = 0,
 169        RES_IF    = 1,
 170        RES_THEN  = 2,
 171        RES_ELIF  = 3,
 172        RES_ELSE  = 4,
 173        RES_FI    = 5,
 174        RES_FOR   = 6,
 175        RES_WHILE = 7,
 176        RES_UNTIL = 8,
 177        RES_DO    = 9,
 178        RES_DONE  = 10,
 179        RES_XXXX  = 11,
 180        RES_IN    = 12,
 181        RES_SNTX  = 13
 182} reserved_style;
 183#define FLAG_END   (1<<RES_NONE)
 184#define FLAG_IF    (1<<RES_IF)
 185#define FLAG_THEN  (1<<RES_THEN)
 186#define FLAG_ELIF  (1<<RES_ELIF)
 187#define FLAG_ELSE  (1<<RES_ELSE)
 188#define FLAG_FI    (1<<RES_FI)
 189#define FLAG_FOR   (1<<RES_FOR)
 190#define FLAG_WHILE (1<<RES_WHILE)
 191#define FLAG_UNTIL (1<<RES_UNTIL)
 192#define FLAG_DO    (1<<RES_DO)
 193#define FLAG_DONE  (1<<RES_DONE)
 194#define FLAG_IN    (1<<RES_IN)
 195#define FLAG_START (1<<RES_XXXX)
 196
 197/* This holds pointers to the various results of parsing */
 198struct p_context {
 199        struct child_prog *child;
 200        struct pipe *list_head;
 201        struct pipe *pipe;
 202#ifndef __U_BOOT__
 203        struct redir_struct *pending_redirect;
 204#endif
 205        reserved_style w;
 206        int old_flag;                           /* for figuring out valid reserved words */
 207        struct p_context *stack;
 208        int type;                       /* define type of parser : ";$" common or special symbol */
 209        /* How about quoting status? */
 210};
 211
 212#ifndef __U_BOOT__
 213struct redir_struct {
 214        redir_type type;                        /* type of redirection */
 215        int fd;                                         /* file descriptor being redirected */
 216        int dup;                                        /* -1, or file descriptor being duplicated */
 217        struct redir_struct *next;      /* pointer to the next redirect in the list */
 218        glob_t word;                            /* *word.gl_pathv is the filename */
 219};
 220#endif
 221
 222struct child_prog {
 223#ifndef __U_BOOT__
 224        pid_t pid;                                      /* 0 if exited */
 225#endif
 226        char **argv;                            /* program name and arguments */
 227        /* was quoted when parsed; copy of struct o_string.nonnull field */
 228        int *argv_nonnull;
 229#ifdef __U_BOOT__
 230        int    argc;                            /* number of program arguments */
 231#endif
 232        struct pipe *group;                     /* if non-NULL, first in group or subshell */
 233#ifndef __U_BOOT__
 234        int subshell;                           /* flag, non-zero if group must be forked */
 235        struct redir_struct *redirects; /* I/O redirections */
 236        glob_t glob_result;                     /* result of parameter globbing */
 237        int is_stopped;                         /* is the program currently running? */
 238        struct pipe *family;            /* pointer back to the child's parent pipe */
 239#endif
 240        int sp;                         /* number of SPECIAL_VAR_SYMBOL */
 241        int type;
 242};
 243
 244struct pipe {
 245#ifndef __U_BOOT__
 246        int jobid;                                      /* job number */
 247#endif
 248        int num_progs;                          /* total number of programs in job */
 249#ifndef __U_BOOT__
 250        int running_progs;                      /* number of programs running */
 251        char *text;                                     /* name of job */
 252        char *cmdbuf;                           /* buffer various argv's point into */
 253        pid_t pgrp;                                     /* process group ID for the job */
 254#endif
 255        struct child_prog *progs;       /* array of commands in pipe */
 256        struct pipe *next;                      /* to track background commands */
 257#ifndef __U_BOOT__
 258        int stopped_progs;                      /* number of programs alive, but stopped */
 259        int job_context;                        /* bitmask defining current context */
 260#endif
 261        pipe_style followup;            /* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
 262        reserved_style r_mode;          /* supports if, for, while, until */
 263};
 264
 265#ifndef __U_BOOT__
 266struct close_me {
 267        int fd;
 268        struct close_me *next;
 269};
 270#endif
 271
 272struct variables {
 273        char *name;
 274        char *value;
 275        int flg_export;
 276        int flg_read_only;
 277        struct variables *next;
 278};
 279
 280/* globals, connect us to the outside world
 281 * the first three support $?, $#, and $1 */
 282#ifndef __U_BOOT__
 283char **global_argv;
 284unsigned int global_argc;
 285#endif
 286static unsigned int last_return_code;
 287#ifndef __U_BOOT__
 288extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
 289#endif
 290
 291/* "globals" within this file */
 292static uchar *ifs;
 293static char map[256];
 294#ifndef __U_BOOT__
 295static int fake_mode;
 296static int interactive;
 297static struct close_me *close_me_head;
 298static const char *cwd;
 299static struct pipe *job_list;
 300static unsigned int last_bg_pid;
 301static unsigned int last_jobid;
 302static unsigned int shell_terminal;
 303static char *PS1;
 304static char *PS2;
 305struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 };
 306struct variables *top_vars = &shell_ver;
 307#else
 308static int flag_repeat = 0;
 309static int do_repeat = 0;
 310static struct variables *top_vars = NULL ;
 311#endif /*__U_BOOT__ */
 312
 313#define B_CHUNK (100)
 314#define B_NOSPAC 1
 315
 316typedef struct {
 317        char *data;
 318        int length;
 319        int maxlen;
 320        int quote;
 321        int nonnull;
 322} o_string;
 323#define NULL_O_STRING {NULL,0,0,0,0}
 324/* used for initialization:
 325        o_string foo = NULL_O_STRING; */
 326
 327/* I can almost use ordinary FILE *.  Is open_memstream() universally
 328 * available?  Where is it documented? */
 329struct in_str {
 330        const char *p;
 331#ifndef __U_BOOT__
 332        char peek_buf[2];
 333#endif
 334        int __promptme;
 335        int promptmode;
 336#ifndef __U_BOOT__
 337        FILE *file;
 338#endif
 339        int (*get) (struct in_str *);
 340        int (*peek) (struct in_str *);
 341};
 342#define b_getch(input) ((input)->get(input))
 343#define b_peek(input) ((input)->peek(input))
 344
 345#ifndef __U_BOOT__
 346#define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
 347
 348struct built_in_command {
 349        char *cmd;                                      /* name */
 350        char *descr;                            /* description */
 351        int (*function) (struct child_prog *);  /* function ptr */
 352};
 353#endif
 354
 355/* define DEBUG_SHELL for debugging output (obviously ;-)) */
 356#if 0
 357#define DEBUG_SHELL
 358#endif
 359
 360/* This should be in utility.c */
 361#ifdef DEBUG_SHELL
 362#ifndef __U_BOOT__
 363static void debug_printf(const char *format, ...)
 364{
 365        va_list args;
 366        va_start(args, format);
 367        vfprintf(stderr, format, args);
 368        va_end(args);
 369}
 370#else
 371#define debug_printf(fmt,args...)       printf (fmt ,##args)
 372#endif
 373#else
 374static inline void debug_printf(const char *format, ...) { }
 375#endif
 376#define final_printf debug_printf
 377
 378#ifdef __U_BOOT__
 379static void syntax_err(void) {
 380         printf("syntax error\n");
 381}
 382#else
 383static void __syntax(char *file, int line) {
 384        error_msg("syntax error %s:%d", file, line);
 385}
 386#define syntax() __syntax(__FILE__, __LINE__)
 387#endif
 388
 389#ifdef __U_BOOT__
 390static void *xmalloc(size_t size);
 391static void *xrealloc(void *ptr, size_t size);
 392#else
 393/* Index of subroutines: */
 394/*   function prototypes for builtins */
 395static int builtin_cd(struct child_prog *child);
 396static int builtin_env(struct child_prog *child);
 397static int builtin_eval(struct child_prog *child);
 398static int builtin_exec(struct child_prog *child);
 399static int builtin_exit(struct child_prog *child);
 400static int builtin_export(struct child_prog *child);
 401static int builtin_fg_bg(struct child_prog *child);
 402static int builtin_help(struct child_prog *child);
 403static int builtin_jobs(struct child_prog *child);
 404static int builtin_pwd(struct child_prog *child);
 405static int builtin_read(struct child_prog *child);
 406static int builtin_set(struct child_prog *child);
 407static int builtin_shift(struct child_prog *child);
 408static int builtin_source(struct child_prog *child);
 409static int builtin_umask(struct child_prog *child);
 410static int builtin_unset(struct child_prog *child);
 411static int builtin_not_written(struct child_prog *child);
 412#endif
 413/*   o_string manipulation: */
 414static int b_check_space(o_string *o, int len);
 415static int b_addchr(o_string *o, int ch);
 416static void b_reset(o_string *o);
 417static int b_addqchr(o_string *o, int ch, int quote);
 418#ifndef __U_BOOT__
 419static int b_adduint(o_string *o, unsigned int i);
 420#endif
 421/*  in_str manipulations: */
 422static int static_get(struct in_str *i);
 423static int static_peek(struct in_str *i);
 424static int file_get(struct in_str *i);
 425static int file_peek(struct in_str *i);
 426#ifndef __U_BOOT__
 427static void setup_file_in_str(struct in_str *i, FILE *f);
 428#else
 429static void setup_file_in_str(struct in_str *i);
 430#endif
 431static void setup_string_in_str(struct in_str *i, const char *s);
 432#ifndef __U_BOOT__
 433/*  close_me manipulations: */
 434static void mark_open(int fd);
 435static void mark_closed(int fd);
 436static void close_all(void);
 437#endif
 438/*  "run" the final data structures: */
 439static char *indenter(int i);
 440static int free_pipe_list(struct pipe *head, int indent);
 441static int free_pipe(struct pipe *pi, int indent);
 442/*  really run the final data structures: */
 443#ifndef __U_BOOT__
 444static int setup_redirects(struct child_prog *prog, int squirrel[]);
 445#endif
 446static int run_list_real(struct pipe *pi);
 447#ifndef __U_BOOT__
 448static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn));
 449#endif
 450static int run_pipe_real(struct pipe *pi);
 451/*   extended glob support: */
 452#ifndef __U_BOOT__
 453static int globhack(const char *src, int flags, glob_t *pglob);
 454static int glob_needed(const char *s);
 455static int xglob(o_string *dest, int flags, glob_t *pglob);
 456#endif
 457/*   variable assignment: */
 458static int is_assignment(const char *s);
 459/*   data structure manipulation: */
 460#ifndef __U_BOOT__
 461static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input);
 462#endif
 463static void initialize_context(struct p_context *ctx);
 464static int done_word(o_string *dest, struct p_context *ctx);
 465static int done_command(struct p_context *ctx);
 466static int done_pipe(struct p_context *ctx, pipe_style type);
 467/*   primary string parsing: */
 468#ifndef __U_BOOT__
 469static int redirect_dup_num(struct in_str *input);
 470static int redirect_opt_num(o_string *o);
 471static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end);
 472static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch);
 473#endif
 474static char *lookup_param(char *src);
 475static char *make_string(char **inp, int *nonnull);
 476static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input);
 477#ifndef __U_BOOT__
 478static int parse_string(o_string *dest, struct p_context *ctx, const char *src);
 479#endif
 480static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger);
 481/*   setup: */
 482static int parse_stream_outer(struct in_str *inp, int flag);
 483#ifndef __U_BOOT__
 484static int parse_string_outer(const char *s, int flag);
 485static int parse_file_outer(FILE *f);
 486#endif
 487#ifndef __U_BOOT__
 488/*   job management: */
 489static int checkjobs(struct pipe* fg_pipe);
 490static void insert_bg_job(struct pipe *pi);
 491static void remove_bg_job(struct pipe *pi);
 492#endif
 493/*     local variable support */
 494static char **make_list_in(char **inp, char *name);
 495static char *insert_var_value(char *inp);
 496static char *insert_var_value_sub(char *inp, int tag_subst);
 497
 498#ifndef __U_BOOT__
 499/* Table of built-in functions.  They can be forked or not, depending on
 500 * context: within pipes, they fork.  As simple commands, they do not.
 501 * When used in non-forking context, they can change global variables
 502 * in the parent shell process.  If forked, of course they can not.
 503 * For example, 'unset foo | whatever' will parse and run, but foo will
 504 * still be set at the end. */
 505static struct built_in_command bltins[] = {
 506        {"bg", "Resume a job in the background", builtin_fg_bg},
 507        {"break", "Exit for, while or until loop", builtin_not_written},
 508        {"cd", "Change working directory", builtin_cd},
 509        {"continue", "Continue for, while or until loop", builtin_not_written},
 510        {"env", "Print all environment variables", builtin_env},
 511        {"eval", "Construct and run shell command", builtin_eval},
 512        {"exec", "Exec command, replacing this shell with the exec'd process",
 513                builtin_exec},
 514        {"exit", "Exit from shell()", builtin_exit},
 515        {"export", "Set environment variable", builtin_export},
 516        {"fg", "Bring job into the foreground", builtin_fg_bg},
 517        {"jobs", "Lists the active jobs", builtin_jobs},
 518        {"pwd", "Print current directory", builtin_pwd},
 519        {"read", "Input environment variable", builtin_read},
 520        {"return", "Return from a function", builtin_not_written},
 521        {"set", "Set/unset shell local variables", builtin_set},
 522        {"shift", "Shift positional parameters", builtin_shift},
 523        {"trap", "Trap signals", builtin_not_written},
 524        {"ulimit","Controls resource limits", builtin_not_written},
 525        {"umask","Sets file creation mask", builtin_umask},
 526        {"unset", "Unset environment variable", builtin_unset},
 527        {".", "Source-in and run commands in a file", builtin_source},
 528        {"help", "List shell built-in commands", builtin_help},
 529        {NULL, NULL, NULL}
 530};
 531
 532static const char *set_cwd(void)
 533{
 534        if(cwd==unknown)
 535                cwd = NULL;     /* xgetcwd(arg) called free(arg) */
 536        cwd = xgetcwd((char *)cwd);
 537        if (!cwd)
 538                cwd = unknown;
 539        return cwd;
 540}
 541
 542/* built-in 'eval' handler */
 543static int builtin_eval(struct child_prog *child)
 544{
 545        char *str = NULL;
 546        int rcode = EXIT_SUCCESS;
 547
 548        if (child->argv[1]) {
 549                str = make_string(child->argv + 1);
 550                parse_string_outer(str, FLAG_EXIT_FROM_LOOP |
 551                                        FLAG_PARSE_SEMICOLON);
 552                free(str);
 553                rcode = last_return_code;
 554        }
 555        return rcode;
 556}
 557
 558/* built-in 'cd <path>' handler */
 559static int builtin_cd(struct child_prog *child)
 560{
 561        char *newdir;
 562        if (child->argv[1] == NULL)
 563                newdir = getenv("HOME");
 564        else
 565                newdir = child->argv[1];
 566        if (chdir(newdir)) {
 567                printf("cd: %s: %s\n", newdir, strerror(errno));
 568                return EXIT_FAILURE;
 569        }
 570        set_cwd();
 571        return EXIT_SUCCESS;
 572}
 573
 574/* built-in 'env' handler */
 575static int builtin_env(struct child_prog *dummy)
 576{
 577        char **e = environ;
 578        if (e == NULL) return EXIT_FAILURE;
 579        for (; *e; e++) {
 580                puts(*e);
 581        }
 582        return EXIT_SUCCESS;
 583}
 584
 585/* built-in 'exec' handler */
 586static int builtin_exec(struct child_prog *child)
 587{
 588        if (child->argv[1] == NULL)
 589                return EXIT_SUCCESS;   /* Really? */
 590        child->argv++;
 591        pseudo_exec(child);
 592        /* never returns */
 593}
 594
 595/* built-in 'exit' handler */
 596static int builtin_exit(struct child_prog *child)
 597{
 598        if (child->argv[1] == NULL)
 599                exit(last_return_code);
 600        exit (atoi(child->argv[1]));
 601}
 602
 603/* built-in 'export VAR=value' handler */
 604static int builtin_export(struct child_prog *child)
 605{
 606        int res = 0;
 607        char *name = child->argv[1];
 608
 609        if (name == NULL) {
 610                return (builtin_env(child));
 611        }
 612
 613        name = strdup(name);
 614
 615        if(name) {
 616                char *value = strchr(name, '=');
 617
 618                if (!value) {
 619                        char *tmp;
 620                        /* They are exporting something without an =VALUE */
 621
 622                        value = get_local_var(name);
 623                        if (value) {
 624                                size_t ln = strlen(name);
 625
 626                                tmp = realloc(name, ln+strlen(value)+2);
 627                                if(tmp==NULL)
 628                                        res = -1;
 629                                else {
 630                                        sprintf(tmp+ln, "=%s", value);
 631                                        name = tmp;
 632                                }
 633                        } else {
 634                                /* bash does not return an error when trying to export
 635                                 * an undefined variable.  Do likewise. */
 636                                res = 1;
 637                        }
 638                }
 639        }
 640        if (res<0)
 641                perror_msg("export");
 642        else if(res==0)
 643                res = set_local_var(name, 1);
 644        else
 645                res = 0;
 646        free(name);
 647        return res;
 648}
 649
 650/* built-in 'fg' and 'bg' handler */
 651static int builtin_fg_bg(struct child_prog *child)
 652{
 653        int i, jobnum;
 654        struct pipe *pi=NULL;
 655
 656        if (!interactive)
 657                return EXIT_FAILURE;
 658        /* If they gave us no args, assume they want the last backgrounded task */
 659        if (!child->argv[1]) {
 660                for (pi = job_list; pi; pi = pi->next) {
 661                        if (pi->jobid == last_jobid) {
 662                                break;
 663                        }
 664                }
 665                if (!pi) {
 666                        error_msg("%s: no current job", child->argv[0]);
 667                        return EXIT_FAILURE;
 668                }
 669        } else {
 670                if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) {
 671                        error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]);
 672                        return EXIT_FAILURE;
 673                }
 674                for (pi = job_list; pi; pi = pi->next) {
 675                        if (pi->jobid == jobnum) {
 676                                break;
 677                        }
 678                }
 679                if (!pi) {
 680                        error_msg("%s: %d: no such job", child->argv[0], jobnum);
 681                        return EXIT_FAILURE;
 682                }
 683        }
 684
 685        if (*child->argv[0] == 'f') {
 686                /* Put the job into the foreground.  */
 687                tcsetpgrp(shell_terminal, pi->pgrp);
 688        }
 689
 690        /* Restart the processes in the job */
 691        for (i = 0; i < pi->num_progs; i++)
 692                pi->progs[i].is_stopped = 0;
 693
 694        if ( (i=kill(- pi->pgrp, SIGCONT)) < 0) {
 695                if (i == ESRCH) {
 696                        remove_bg_job(pi);
 697                } else {
 698                        perror_msg("kill (SIGCONT)");
 699                }
 700        }
 701
 702        pi->stopped_progs = 0;
 703        return EXIT_SUCCESS;
 704}
 705
 706/* built-in 'help' handler */
 707static int builtin_help(struct child_prog *dummy)
 708{
 709        struct built_in_command *x;
 710
 711        printf("\nBuilt-in commands:\n");
 712        printf("-------------------\n");
 713        for (x = bltins; x->cmd; x++) {
 714                if (x->descr==NULL)
 715                        continue;
 716                printf("%s\t%s\n", x->cmd, x->descr);
 717        }
 718        printf("\n\n");
 719        return EXIT_SUCCESS;
 720}
 721
 722/* built-in 'jobs' handler */
 723static int builtin_jobs(struct child_prog *child)
 724{
 725        struct pipe *job;
 726        char *status_string;
 727
 728        for (job = job_list; job; job = job->next) {
 729                if (job->running_progs == job->stopped_progs)
 730                        status_string = "Stopped";
 731                else
 732                        status_string = "Running";
 733
 734                printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text);
 735        }
 736        return EXIT_SUCCESS;
 737}
 738
 739
 740/* built-in 'pwd' handler */
 741static int builtin_pwd(struct child_prog *dummy)
 742{
 743        puts(set_cwd());
 744        return EXIT_SUCCESS;
 745}
 746
 747/* built-in 'read VAR' handler */
 748static int builtin_read(struct child_prog *child)
 749{
 750        int res;
 751
 752        if (child->argv[1]) {
 753                char string[BUFSIZ];
 754                char *var = 0;
 755
 756                string[0] = 0;  /* In case stdin has only EOF */
 757                /* read string */
 758                fgets(string, sizeof(string), stdin);
 759                chomp(string);
 760                var = malloc(strlen(child->argv[1])+strlen(string)+2);
 761                if(var) {
 762                        sprintf(var, "%s=%s", child->argv[1], string);
 763                        res = set_local_var(var, 0);
 764                } else
 765                        res = -1;
 766                if (res)
 767                        fprintf(stderr, "read: %m\n");
 768                free(var);      /* So not move up to avoid breaking errno */
 769                return res;
 770        } else {
 771                do res=getchar(); while(res!='\n' && res!=EOF);
 772                return 0;
 773        }
 774}
 775
 776/* built-in 'set VAR=value' handler */
 777static int builtin_set(struct child_prog *child)
 778{
 779        char *temp = child->argv[1];
 780        struct variables *e;
 781
 782        if (temp == NULL)
 783                for(e = top_vars; e; e=e->next)
 784                        printf("%s=%s\n", e->name, e->value);
 785        else
 786                set_local_var(temp, 0);
 787
 788                return EXIT_SUCCESS;
 789}
 790
 791
 792/* Built-in 'shift' handler */
 793static int builtin_shift(struct child_prog *child)
 794{
 795        int n=1;
 796        if (child->argv[1]) {
 797                n=atoi(child->argv[1]);
 798        }
 799        if (n>=0 && n<global_argc) {
 800                /* XXX This probably breaks $0 */
 801                global_argc -= n;
 802                global_argv += n;
 803                return EXIT_SUCCESS;
 804        } else {
 805                return EXIT_FAILURE;
 806        }
 807}
 808
 809/* Built-in '.' handler (read-in and execute commands from file) */
 810static int builtin_source(struct child_prog *child)
 811{
 812        FILE *input;
 813        int status;
 814
 815        if (child->argv[1] == NULL)
 816                return EXIT_FAILURE;
 817
 818        /* XXX search through $PATH is missing */
 819        input = fopen(child->argv[1], "r");
 820        if (!input) {
 821                error_msg("Couldn't open file '%s'", child->argv[1]);
 822                return EXIT_FAILURE;
 823        }
 824
 825        /* Now run the file */
 826        /* XXX argv and argc are broken; need to save old global_argv
 827         * (pointer only is OK!) on this stack frame,
 828         * set global_argv=child->argv+1, recurse, and restore. */
 829        mark_open(fileno(input));
 830        status = parse_file_outer(input);
 831        mark_closed(fileno(input));
 832        fclose(input);
 833        return (status);
 834}
 835
 836static int builtin_umask(struct child_prog *child)
 837{
 838        mode_t new_umask;
 839        const char *arg = child->argv[1];
 840        char *end;
 841        if (arg) {
 842                new_umask=strtoul(arg, &end, 8);
 843                if (*end!='\0' || end == arg) {
 844                        return EXIT_FAILURE;
 845                }
 846        } else {
 847                printf("%.3o\n", (unsigned int) (new_umask=umask(0)));
 848        }
 849        umask(new_umask);
 850        return EXIT_SUCCESS;
 851}
 852
 853/* built-in 'unset VAR' handler */
 854static int builtin_unset(struct child_prog *child)
 855{
 856        /* bash returned already true */
 857        unset_local_var(child->argv[1]);
 858        return EXIT_SUCCESS;
 859}
 860
 861static int builtin_not_written(struct child_prog *child)
 862{
 863        printf("builtin_%s not written\n",child->argv[0]);
 864        return EXIT_FAILURE;
 865}
 866#endif
 867
 868static int b_check_space(o_string *o, int len)
 869{
 870        /* It would be easy to drop a more restrictive policy
 871         * in here, such as setting a maximum string length */
 872        if (o->length + len > o->maxlen) {
 873                char *old_data = o->data;
 874                /* assert (data == NULL || o->maxlen != 0); */
 875                o->maxlen += max(2*len, B_CHUNK);
 876                o->data = realloc(o->data, 1 + o->maxlen);
 877                if (o->data == NULL) {
 878                        free(old_data);
 879                }
 880        }
 881        return o->data == NULL;
 882}
 883
 884static int b_addchr(o_string *o, int ch)
 885{
 886        debug_printf("b_addchr: %c %d %p\n", ch, o->length, o);
 887        if (b_check_space(o, 1)) return B_NOSPAC;
 888        o->data[o->length] = ch;
 889        o->length++;
 890        o->data[o->length] = '\0';
 891        return 0;
 892}
 893
 894static void b_reset(o_string *o)
 895{
 896        o->length = 0;
 897        o->nonnull = 0;
 898        if (o->data != NULL) *o->data = '\0';
 899}
 900
 901static void b_free(o_string *o)
 902{
 903        b_reset(o);
 904        free(o->data);
 905        o->data = NULL;
 906        o->maxlen = 0;
 907}
 908
 909/* My analysis of quoting semantics tells me that state information
 910 * is associated with a destination, not a source.
 911 */
 912static int b_addqchr(o_string *o, int ch, int quote)
 913{
 914        if (quote && strchr("*?[\\",ch)) {
 915                int rc;
 916                rc = b_addchr(o, '\\');
 917                if (rc) return rc;
 918        }
 919        return b_addchr(o, ch);
 920}
 921
 922#ifndef __U_BOOT__
 923static int b_adduint(o_string *o, unsigned int i)
 924{
 925        int r;
 926        char *p = simple_itoa(i);
 927        /* no escape checking necessary */
 928        do r=b_addchr(o, *p++); while (r==0 && *p);
 929        return r;
 930}
 931#endif
 932
 933static int static_get(struct in_str *i)
 934{
 935        int ch = *i->p++;
 936        if (ch=='\0') return EOF;
 937        return ch;
 938}
 939
 940static int static_peek(struct in_str *i)
 941{
 942        return *i->p;
 943}
 944
 945#ifndef __U_BOOT__
 946static inline void cmdedit_set_initial_prompt(void)
 947{
 948#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
 949        PS1 = NULL;
 950#else
 951        PS1 = getenv("PS1");
 952        if(PS1==0)
 953                PS1 = "\\w \\$ ";
 954#endif
 955}
 956
 957static inline void setup_prompt_string(int promptmode, char **prompt_str)
 958{
 959        debug_printf("setup_prompt_string %d ",promptmode);
 960#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
 961        /* Set up the prompt */
 962        if (promptmode == 1) {
 963                free(PS1);
 964                PS1=xmalloc(strlen(cwd)+4);
 965                sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ?  "$ ":"# ");
 966                *prompt_str = PS1;
 967        } else {
 968                *prompt_str = PS2;
 969        }
 970#else
 971        *prompt_str = (promptmode==1)? PS1 : PS2;
 972#endif
 973        debug_printf("result %s\n",*prompt_str);
 974}
 975#endif
 976
 977static void get_user_input(struct in_str *i)
 978{
 979#ifndef __U_BOOT__
 980        char *prompt_str;
 981        static char the_command[BUFSIZ];
 982
 983        setup_prompt_string(i->promptmode, &prompt_str);
 984#ifdef CONFIG_FEATURE_COMMAND_EDITING
 985        /*
 986         ** enable command line editing only while a command line
 987         ** is actually being read; otherwise, we'll end up bequeathing
 988         ** atexit() handlers and other unwanted stuff to our
 989         ** child processes (rob@sysgo.de)
 990         */
 991        cmdedit_read_input(prompt_str, the_command);
 992#else
 993        fputs(prompt_str, stdout);
 994        fflush(stdout);
 995        the_command[0]=fgetc(i->file);
 996        the_command[1]='\0';
 997#endif
 998        fflush(stdout);
 999        i->p = the_command;
1000#else
1001        int n;
1002        static char the_command[CONFIG_SYS_CBSIZE + 1];
1003
1004        bootretry_reset_cmd_timeout();
1005        i->__promptme = 1;
1006        if (i->promptmode == 1) {
1007                n = cli_readline(CONFIG_SYS_PROMPT);
1008        } else {
1009                n = cli_readline(CONFIG_SYS_PROMPT_HUSH_PS2);
1010        }
1011#ifdef CONFIG_BOOT_RETRY_TIME
1012        if (n == -2) {
1013          puts("\nTimeout waiting for command\n");
1014#  ifdef CONFIG_RESET_TO_RETRY
1015          do_reset(NULL, 0, 0, NULL);
1016#  else
1017#       error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1018#  endif
1019        }
1020#endif
1021        if (n == -1 ) {
1022                flag_repeat = 0;
1023                i->__promptme = 0;
1024        }
1025        n = strlen(console_buffer);
1026        console_buffer[n] = '\n';
1027        console_buffer[n+1]= '\0';
1028        if (had_ctrlc()) flag_repeat = 0;
1029        clear_ctrlc();
1030        do_repeat = 0;
1031        if (i->promptmode == 1) {
1032                if (console_buffer[0] == '\n'&& flag_repeat == 0) {
1033                        strcpy(the_command,console_buffer);
1034                }
1035                else {
1036                        if (console_buffer[0] != '\n') {
1037                                strcpy(the_command,console_buffer);
1038                                flag_repeat = 1;
1039                        }
1040                        else {
1041                                do_repeat = 1;
1042                        }
1043                }
1044                i->p = the_command;
1045        }
1046        else {
1047                if (console_buffer[0] != '\n') {
1048                        if (strlen(the_command) + strlen(console_buffer)
1049                            < CONFIG_SYS_CBSIZE) {
1050                                n = strlen(the_command);
1051                                the_command[n-1] = ' ';
1052                                strcpy(&the_command[n],console_buffer);
1053                        }
1054                        else {
1055                                the_command[0] = '\n';
1056                                the_command[1] = '\0';
1057                                flag_repeat = 0;
1058                        }
1059                }
1060                if (i->__promptme == 0) {
1061                        the_command[0] = '\n';
1062                        the_command[1] = '\0';
1063                }
1064                i->p = console_buffer;
1065        }
1066#endif
1067}
1068
1069/* This is the magic location that prints prompts
1070 * and gets data back from the user */
1071static int file_get(struct in_str *i)
1072{
1073        int ch;
1074
1075        ch = 0;
1076        /* If there is data waiting, eat it up */
1077        if (i->p && *i->p) {
1078                ch = *i->p++;
1079        } else {
1080                /* need to double check i->file because we might be doing something
1081                 * more complicated by now, like sourcing or substituting. */
1082#ifndef __U_BOOT__
1083                if (i->__promptme && interactive && i->file == stdin) {
1084                        while(! i->p || (interactive && strlen(i->p)==0) ) {
1085#else
1086                        while(! i->p  || strlen(i->p)==0 ) {
1087#endif
1088                                get_user_input(i);
1089                        }
1090                        i->promptmode=2;
1091#ifndef __U_BOOT__
1092                        i->__promptme = 0;
1093#endif
1094                        if (i->p && *i->p) {
1095                                ch = *i->p++;
1096                        }
1097#ifndef __U_BOOT__
1098                } else {
1099                        ch = fgetc(i->file);
1100                }
1101
1102#endif
1103                debug_printf("b_getch: got a %d\n", ch);
1104        }
1105#ifndef __U_BOOT__
1106        if (ch == '\n') i->__promptme=1;
1107#endif
1108        return ch;
1109}
1110
1111/* All the callers guarantee this routine will never be
1112 * used right after a newline, so prompting is not needed.
1113 */
1114static int file_peek(struct in_str *i)
1115{
1116#ifndef __U_BOOT__
1117        if (i->p && *i->p) {
1118#endif
1119                return *i->p;
1120#ifndef __U_BOOT__
1121        } else {
1122                i->peek_buf[0] = fgetc(i->file);
1123                i->peek_buf[1] = '\0';
1124                i->p = i->peek_buf;
1125                debug_printf("b_peek: got a %d\n", *i->p);
1126                return *i->p;
1127        }
1128#endif
1129}
1130
1131#ifndef __U_BOOT__
1132static void setup_file_in_str(struct in_str *i, FILE *f)
1133#else
1134static void setup_file_in_str(struct in_str *i)
1135#endif
1136{
1137        i->peek = file_peek;
1138        i->get = file_get;
1139        i->__promptme=1;
1140        i->promptmode=1;
1141#ifndef __U_BOOT__
1142        i->file = f;
1143#endif
1144        i->p = NULL;
1145}
1146
1147static void setup_string_in_str(struct in_str *i, const char *s)
1148{
1149        i->peek = static_peek;
1150        i->get = static_get;
1151        i->__promptme=1;
1152        i->promptmode=1;
1153        i->p = s;
1154}
1155
1156#ifndef __U_BOOT__
1157static void mark_open(int fd)
1158{
1159        struct close_me *new = xmalloc(sizeof(struct close_me));
1160        new->fd = fd;
1161        new->next = close_me_head;
1162        close_me_head = new;
1163}
1164
1165static void mark_closed(int fd)
1166{
1167        struct close_me *tmp;
1168        if (close_me_head == NULL || close_me_head->fd != fd)
1169                error_msg_and_die("corrupt close_me");
1170        tmp = close_me_head;
1171        close_me_head = close_me_head->next;
1172        free(tmp);
1173}
1174
1175static void close_all(void)
1176{
1177        struct close_me *c;
1178        for (c=close_me_head; c; c=c->next) {
1179                close(c->fd);
1180        }
1181        close_me_head = NULL;
1182}
1183
1184/* squirrel != NULL means we squirrel away copies of stdin, stdout,
1185 * and stderr if they are redirected. */
1186static int setup_redirects(struct child_prog *prog, int squirrel[])
1187{
1188        int openfd, mode;
1189        struct redir_struct *redir;
1190
1191        for (redir=prog->redirects; redir; redir=redir->next) {
1192                if (redir->dup == -1 && redir->word.gl_pathv == NULL) {
1193                        /* something went wrong in the parse.  Pretend it didn't happen */
1194                        continue;
1195                }
1196                if (redir->dup == -1) {
1197                        mode=redir_table[redir->type].mode;
1198                        openfd = open(redir->word.gl_pathv[0], mode, 0666);
1199                        if (openfd < 0) {
1200                        /* this could get lost if stderr has been redirected, but
1201                           bash and ash both lose it as well (though zsh doesn't!) */
1202                                perror_msg("error opening %s", redir->word.gl_pathv[0]);
1203                                return 1;
1204                        }
1205                } else {
1206                        openfd = redir->dup;
1207                }
1208
1209                if (openfd != redir->fd) {
1210                        if (squirrel && redir->fd < 3) {
1211                                squirrel[redir->fd] = dup(redir->fd);
1212                        }
1213                        if (openfd == -3) {
1214                                close(openfd);
1215                        } else {
1216                                dup2(openfd, redir->fd);
1217                                if (redir->dup == -1)
1218                                        close (openfd);
1219                        }
1220                }
1221        }
1222        return 0;
1223}
1224
1225static void restore_redirects(int squirrel[])
1226{
1227        int i, fd;
1228        for (i=0; i<3; i++) {
1229                fd = squirrel[i];
1230                if (fd != -1) {
1231                        /* No error checking.  I sure wouldn't know what
1232                         * to do with an error if I found one! */
1233                        dup2(fd, i);
1234                        close(fd);
1235                }
1236        }
1237}
1238
1239/* never returns */
1240/* XXX no exit() here.  If you don't exec, use _exit instead.
1241 * The at_exit handlers apparently confuse the calling process,
1242 * in particular stdin handling.  Not sure why? */
1243static void pseudo_exec(struct child_prog *child)
1244{
1245        int i, rcode;
1246        char *p;
1247        struct built_in_command *x;
1248        if (child->argv) {
1249                for (i=0; is_assignment(child->argv[i]); i++) {
1250                        debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]);
1251                        p = insert_var_value(child->argv[i]);
1252                        putenv(strdup(p));
1253                        if (p != child->argv[i]) free(p);
1254                }
1255                child->argv+=i;  /* XXX this hack isn't so horrible, since we are about
1256                                        to exit, and therefore don't need to keep data
1257                                        structures consistent for free() use. */
1258                /* If a variable is assigned in a forest, and nobody listens,
1259                 * was it ever really set?
1260                 */
1261                if (child->argv[0] == NULL) {
1262                        _exit(EXIT_SUCCESS);
1263                }
1264
1265                /*
1266                 * Check if the command matches any of the builtins.
1267                 * Depending on context, this might be redundant.  But it's
1268                 * easier to waste a few CPU cycles than it is to figure out
1269                 * if this is one of those cases.
1270                 */
1271                for (x = bltins; x->cmd; x++) {
1272                        if (strcmp(child->argv[0], x->cmd) == 0 ) {
1273                                debug_printf("builtin exec %s\n", child->argv[0]);
1274                                rcode = x->function(child);
1275                                fflush(stdout);
1276                                _exit(rcode);
1277                        }
1278                }
1279
1280                /* Check if the command matches any busybox internal commands
1281                 * ("applets") here.
1282                 * FIXME: This feature is not 100% safe, since
1283                 * BusyBox is not fully reentrant, so we have no guarantee the things
1284                 * from the .bss are still zeroed, or that things from .data are still
1285                 * at their defaults.  We could exec ourself from /proc/self/exe, but I
1286                 * really dislike relying on /proc for things.  We could exec ourself
1287                 * from global_argv[0], but if we are in a chroot, we may not be able
1288                 * to find ourself... */
1289#ifdef CONFIG_FEATURE_SH_STANDALONE_SHELL
1290                {
1291                        int argc_l;
1292                        char** argv_l=child->argv;
1293                        char *name = child->argv[0];
1294
1295#ifdef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN
1296                        /* Following discussions from November 2000 on the busybox mailing
1297                         * list, the default configuration, (without
1298                         * get_last_path_component()) lets the user force use of an
1299                         * external command by specifying the full (with slashes) filename.
1300                         * If you enable CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN then applets
1301                         * _aways_ override external commands, so if you want to run
1302                         * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
1303                         * filesystem and is _not_ busybox.  Some systems may want this,
1304                         * most do not.  */
1305                        name = get_last_path_component(name);
1306#endif
1307                        /* Count argc for use in a second... */
1308                        for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++);
1309                        optind = 1;
1310                        debug_printf("running applet %s\n", name);
1311                        run_applet_by_name(name, argc_l, child->argv);
1312                }
1313#endif
1314                debug_printf("exec of %s\n",child->argv[0]);
1315                execvp(child->argv[0],child->argv);
1316                perror_msg("couldn't exec: %s",child->argv[0]);
1317                _exit(1);
1318        } else if (child->group) {
1319                debug_printf("runtime nesting to group\n");
1320                interactive=0;    /* crucial!!!! */
1321                rcode = run_list_real(child->group);
1322                /* OK to leak memory by not calling free_pipe_list,
1323                 * since this process is about to exit */
1324                _exit(rcode);
1325        } else {
1326                /* Can happen.  See what bash does with ">foo" by itself. */
1327                debug_printf("trying to pseudo_exec null command\n");
1328                _exit(EXIT_SUCCESS);
1329        }
1330}
1331
1332static void insert_bg_job(struct pipe *pi)
1333{
1334        struct pipe *thejob;
1335
1336        /* Linear search for the ID of the job to use */
1337        pi->jobid = 1;
1338        for (thejob = job_list; thejob; thejob = thejob->next)
1339                if (thejob->jobid >= pi->jobid)
1340                        pi->jobid = thejob->jobid + 1;
1341
1342        /* add thejob to the list of running jobs */
1343        if (!job_list) {
1344                thejob = job_list = xmalloc(sizeof(*thejob));
1345        } else {
1346                for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */;
1347                thejob->next = xmalloc(sizeof(*thejob));
1348                thejob = thejob->next;
1349        }
1350
1351        /* physically copy the struct job */
1352        memcpy(thejob, pi, sizeof(struct pipe));
1353        thejob->next = NULL;
1354        thejob->running_progs = thejob->num_progs;
1355        thejob->stopped_progs = 0;
1356        thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */
1357
1358        /*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */
1359        {
1360                char *bar=thejob->text;
1361                char **foo=pi->progs[0].argv;
1362                while(foo && *foo) {
1363                        bar += sprintf(bar, "%s ", *foo++);
1364                }
1365        }
1366
1367        /* we don't wait for background thejobs to return -- append it
1368           to the list of backgrounded thejobs and leave it alone */
1369        printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid);
1370        last_bg_pid = thejob->progs[0].pid;
1371        last_jobid = thejob->jobid;
1372}
1373
1374/* remove a backgrounded job */
1375static void remove_bg_job(struct pipe *pi)
1376{
1377        struct pipe *prev_pipe;
1378
1379        if (pi == job_list) {
1380                job_list = pi->next;
1381        } else {
1382                prev_pipe = job_list;
1383                while (prev_pipe->next != pi)
1384                        prev_pipe = prev_pipe->next;
1385                prev_pipe->next = pi->next;
1386        }
1387        if (job_list)
1388                last_jobid = job_list->jobid;
1389        else
1390                last_jobid = 0;
1391
1392        pi->stopped_progs = 0;
1393        free_pipe(pi, 0);
1394        free(pi);
1395}
1396
1397/* Checks to see if any processes have exited -- if they
1398   have, figure out why and see if a job has completed */
1399static int checkjobs(struct pipe* fg_pipe)
1400{
1401        int attributes;
1402        int status;
1403        int prognum = 0;
1404        struct pipe *pi;
1405        pid_t childpid;
1406
1407        attributes = WUNTRACED;
1408        if (fg_pipe==NULL) {
1409                attributes |= WNOHANG;
1410        }
1411
1412        while ((childpid = waitpid(-1, &status, attributes)) > 0) {
1413                if (fg_pipe) {
1414                        int i, rcode = 0;
1415                        for (i=0; i < fg_pipe->num_progs; i++) {
1416                                if (fg_pipe->progs[i].pid == childpid) {
1417                                        if (i==fg_pipe->num_progs-1)
1418                                                rcode=WEXITSTATUS(status);
1419                                        (fg_pipe->num_progs)--;
1420                                        return(rcode);
1421                                }
1422                        }
1423                }
1424
1425                for (pi = job_list; pi; pi = pi->next) {
1426                        prognum = 0;
1427                        while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) {
1428                                prognum++;
1429                        }
1430                        if (prognum < pi->num_progs)
1431                                break;
1432                }
1433
1434                if(pi==NULL) {
1435                        debug_printf("checkjobs: pid %d was not in our list!\n", childpid);
1436                        continue;
1437                }
1438
1439                if (WIFEXITED(status) || WIFSIGNALED(status)) {
1440                        /* child exited */
1441                        pi->running_progs--;
1442                        pi->progs[prognum].pid = 0;
1443
1444                        if (!pi->running_progs) {
1445                                printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text);
1446                                remove_bg_job(pi);
1447                        }
1448                } else {
1449                        /* child stopped */
1450                        pi->stopped_progs++;
1451                        pi->progs[prognum].is_stopped = 1;
1452
1453#if 0
1454                        /* Printing this stuff is a pain, since it tends to
1455                         * overwrite the prompt an inconveinient moments.  So
1456                         * don't do that.  */
1457                        if (pi->stopped_progs == pi->num_progs) {
1458                                printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text);
1459                        }
1460#endif
1461                }
1462        }
1463
1464        if (childpid == -1 && errno != ECHILD)
1465                perror_msg("waitpid");
1466
1467        /* move the shell to the foreground */
1468        /*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */
1469        /*      perror_msg("tcsetpgrp-2"); */
1470        return -1;
1471}
1472
1473/* Figure out our controlling tty, checking in order stderr,
1474 * stdin, and stdout.  If check_pgrp is set, also check that
1475 * we belong to the foreground process group associated with
1476 * that tty.  The value of shell_terminal is needed in order to call
1477 * tcsetpgrp(shell_terminal, ...); */
1478void controlling_tty(int check_pgrp)
1479{
1480        pid_t curpgrp;
1481
1482        if ((curpgrp = tcgetpgrp(shell_terminal = 2)) < 0
1483                        && (curpgrp = tcgetpgrp(shell_terminal = 0)) < 0
1484                        && (curpgrp = tcgetpgrp(shell_terminal = 1)) < 0)
1485                goto shell_terminal_error;
1486
1487        if (check_pgrp && curpgrp != getpgid(0))
1488                goto shell_terminal_error;
1489
1490        return;
1491
1492shell_terminal_error:
1493                shell_terminal = -1;
1494                return;
1495}
1496#endif
1497
1498/* run_pipe_real() starts all the jobs, but doesn't wait for anything
1499 * to finish.  See checkjobs().
1500 *
1501 * return code is normally -1, when the caller has to wait for children
1502 * to finish to determine the exit status of the pipe.  If the pipe
1503 * is a simple builtin command, however, the action is done by the
1504 * time run_pipe_real returns, and the exit code is provided as the
1505 * return value.
1506 *
1507 * The input of the pipe is always stdin, the output is always
1508 * stdout.  The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
1509 * because it tries to avoid running the command substitution in
1510 * subshell, when that is in fact necessary.  The subshell process
1511 * now has its stdout directed to the input of the appropriate pipe,
1512 * so this routine is noticeably simpler.
1513 */
1514static int run_pipe_real(struct pipe *pi)
1515{
1516        int i;
1517#ifndef __U_BOOT__
1518        int nextin, nextout;
1519        int pipefds[2];                         /* pipefds[0] is for reading */
1520        struct child_prog *child;
1521        struct built_in_command *x;
1522        char *p;
1523# if __GNUC__
1524        /* Avoid longjmp clobbering */
1525        (void) &i;
1526        (void) &nextin;
1527        (void) &nextout;
1528        (void) &child;
1529# endif
1530#else
1531        int nextin;
1532        int flag = do_repeat ? CMD_FLAG_REPEAT : 0;
1533        struct child_prog *child;
1534        char *p;
1535# if __GNUC__
1536        /* Avoid longjmp clobbering */
1537        (void) &i;
1538        (void) &nextin;
1539        (void) &child;
1540# endif
1541#endif  /* __U_BOOT__ */
1542
1543        nextin = 0;
1544#ifndef __U_BOOT__
1545        pi->pgrp = -1;
1546#endif
1547
1548        /* Check if this is a simple builtin (not part of a pipe).
1549         * Builtins within pipes have to fork anyway, and are handled in
1550         * pseudo_exec.  "echo foo | read bar" doesn't work on bash, either.
1551         */
1552        if (pi->num_progs == 1) child = & (pi->progs[0]);
1553#ifndef __U_BOOT__
1554        if (pi->num_progs == 1 && child->group && child->subshell == 0) {
1555                int squirrel[] = {-1, -1, -1};
1556                int rcode;
1557                debug_printf("non-subshell grouping\n");
1558                setup_redirects(child, squirrel);
1559                /* XXX could we merge code with following builtin case,
1560                 * by creating a pseudo builtin that calls run_list_real? */
1561                rcode = run_list_real(child->group);
1562                restore_redirects(squirrel);
1563#else
1564                if (pi->num_progs == 1 && child->group) {
1565                int rcode;
1566                debug_printf("non-subshell grouping\n");
1567                rcode = run_list_real(child->group);
1568#endif
1569                return rcode;
1570        } else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) {
1571                for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ }
1572                if (i!=0 && child->argv[i]==NULL) {
1573                        /* assignments, but no command: set the local environment */
1574                        for (i=0; child->argv[i]!=NULL; i++) {
1575
1576                                /* Ok, this case is tricky.  We have to decide if this is a
1577                                 * local variable, or an already exported variable.  If it is
1578                                 * already exported, we have to export the new value.  If it is
1579                                 * not exported, we need only set this as a local variable.
1580                                 * This junk is all to decide whether or not to export this
1581                                 * variable. */
1582                                int export_me=0;
1583                                char *name, *value;
1584                                name = xstrdup(child->argv[i]);
1585                                debug_printf("Local environment set: %s\n", name);
1586                                value = strchr(name, '=');
1587                                if (value)
1588                                        *value=0;
1589#ifndef __U_BOOT__
1590                                if ( get_local_var(name)) {
1591                                        export_me=1;
1592                                }
1593#endif
1594                                free(name);
1595                                p = insert_var_value(child->argv[i]);
1596                                set_local_var(p, export_me);
1597                                if (p != child->argv[i]) free(p);
1598                        }
1599                        return EXIT_SUCCESS;   /* don't worry about errors in set_local_var() yet */
1600                }
1601                for (i = 0; is_assignment(child->argv[i]); i++) {
1602                        p = insert_var_value(child->argv[i]);
1603#ifndef __U_BOOT__
1604                        putenv(strdup(p));
1605#else
1606                        set_local_var(p, 0);
1607#endif
1608                        if (p != child->argv[i]) {
1609                                child->sp--;
1610                                free(p);
1611                        }
1612                }
1613                if (child->sp) {
1614                        char * str = NULL;
1615
1616                        str = make_string(child->argv + i,
1617                                          child->argv_nonnull + i);
1618                        parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING);
1619                        free(str);
1620                        return last_return_code;
1621                }
1622#ifndef __U_BOOT__
1623                for (x = bltins; x->cmd; x++) {
1624                        if (strcmp(child->argv[i], x->cmd) == 0 ) {
1625                                int squirrel[] = {-1, -1, -1};
1626                                int rcode;
1627                                if (x->function == builtin_exec && child->argv[i+1]==NULL) {
1628                                        debug_printf("magic exec\n");
1629                                        setup_redirects(child,NULL);
1630                                        return EXIT_SUCCESS;
1631                                }
1632                                debug_printf("builtin inline %s\n", child->argv[0]);
1633                                /* XXX setup_redirects acts on file descriptors, not FILEs.
1634                                 * This is perfect for work that comes after exec().
1635                                 * Is it really safe for inline use?  Experimentally,
1636                                 * things seem to work with glibc. */
1637                                setup_redirects(child, squirrel);
1638
1639                                child->argv += i;  /* XXX horrible hack */
1640                                rcode = x->function(child);
1641                                /* XXX restore hack so free() can work right */
1642                                child->argv -= i;
1643                                restore_redirects(squirrel);
1644                        }
1645                        return rcode;
1646                }
1647#else
1648                /* check ";", because ,example , argv consist from
1649                 * "help;flinfo" must not execute
1650                 */
1651                if (strchr(child->argv[i], ';')) {
1652                        printf("Unknown command '%s' - try 'help' or use "
1653                                        "'run' command\n", child->argv[i]);
1654                        return -1;
1655                }
1656                /* Process the command */
1657                return cmd_process(flag, child->argc, child->argv,
1658                                   &flag_repeat, NULL);
1659#endif
1660        }
1661#ifndef __U_BOOT__
1662
1663        for (i = 0; i < pi->num_progs; i++) {
1664                child = & (pi->progs[i]);
1665
1666                /* pipes are inserted between pairs of commands */
1667                if ((i + 1) < pi->num_progs) {
1668                        if (pipe(pipefds)<0) perror_msg_and_die("pipe");
1669                        nextout = pipefds[1];
1670                } else {
1671                        nextout=1;
1672                        pipefds[0] = -1;
1673                }
1674
1675                /* XXX test for failed fork()? */
1676                if (!(child->pid = fork())) {
1677                        /* Set the handling for job control signals back to the default.  */
1678                        signal(SIGINT, SIG_DFL);
1679                        signal(SIGQUIT, SIG_DFL);
1680                        signal(SIGTERM, SIG_DFL);
1681                        signal(SIGTSTP, SIG_DFL);
1682                        signal(SIGTTIN, SIG_DFL);
1683                        signal(SIGTTOU, SIG_DFL);
1684                        signal(SIGCHLD, SIG_DFL);
1685
1686                        close_all();
1687
1688                        if (nextin != 0) {
1689                                dup2(nextin, 0);
1690                                close(nextin);
1691                        }
1692                        if (nextout != 1) {
1693                                dup2(nextout, 1);
1694                                close(nextout);
1695                        }
1696                        if (pipefds[0]!=-1) {
1697                                close(pipefds[0]);  /* opposite end of our output pipe */
1698                        }
1699
1700                        /* Like bash, explicit redirects override pipes,
1701                         * and the pipe fd is available for dup'ing. */
1702                        setup_redirects(child,NULL);
1703
1704                        if (interactive && pi->followup!=PIPE_BG) {
1705                                /* If we (the child) win the race, put ourselves in the process
1706                                 * group whose leader is the first process in this pipe. */
1707                                if (pi->pgrp < 0) {
1708                                        pi->pgrp = getpid();
1709                                }
1710                                if (setpgid(0, pi->pgrp) == 0) {
1711                                        tcsetpgrp(2, pi->pgrp);
1712                                }
1713                        }
1714
1715                        pseudo_exec(child);
1716                }
1717
1718
1719                /* put our child in the process group whose leader is the
1720                   first process in this pipe */
1721                if (pi->pgrp < 0) {
1722                        pi->pgrp = child->pid;
1723                }
1724                /* Don't check for errors.  The child may be dead already,
1725                 * in which case setpgid returns error code EACCES. */
1726                setpgid(child->pid, pi->pgrp);
1727
1728                if (nextin != 0)
1729                        close(nextin);
1730                if (nextout != 1)
1731                        close(nextout);
1732
1733                /* If there isn't another process, nextin is garbage
1734                   but it doesn't matter */
1735                nextin = pipefds[0];
1736        }
1737#endif
1738        return -1;
1739}
1740
1741static int run_list_real(struct pipe *pi)
1742{
1743        char *save_name = NULL;
1744        char **list = NULL;
1745        char **save_list = NULL;
1746        struct pipe *rpipe;
1747        int flag_rep = 0;
1748#ifndef __U_BOOT__
1749        int save_num_progs;
1750#endif
1751        int rcode=0, flag_skip=1;
1752        int flag_restore = 0;
1753        int if_code=0, next_if_code=0;  /* need double-buffer to handle elif */
1754        reserved_style rmode, skip_more_in_this_rmode=RES_XXXX;
1755        /* check syntax for "for" */
1756        for (rpipe = pi; rpipe; rpipe = rpipe->next) {
1757                if ((rpipe->r_mode == RES_IN ||
1758                    rpipe->r_mode == RES_FOR) &&
1759                    (rpipe->next == NULL)) {
1760                                syntax();
1761#ifdef __U_BOOT__
1762                                flag_repeat = 0;
1763#endif
1764                                return 1;
1765                }
1766                if ((rpipe->r_mode == RES_IN &&
1767                        (rpipe->next->r_mode == RES_IN &&
1768                        rpipe->next->progs->argv != NULL))||
1769                        (rpipe->r_mode == RES_FOR &&
1770                        rpipe->next->r_mode != RES_IN)) {
1771                                syntax();
1772#ifdef __U_BOOT__
1773                                flag_repeat = 0;
1774#endif
1775                                return 1;
1776                }
1777        }
1778        for (; pi; pi = (flag_restore != 0) ? rpipe : pi->next) {
1779                if (pi->r_mode == RES_WHILE || pi->r_mode == RES_UNTIL ||
1780                        pi->r_mode == RES_FOR) {
1781#ifdef __U_BOOT__
1782                                /* check Ctrl-C */
1783                                ctrlc();
1784                                if ((had_ctrlc())) {
1785                                        return 1;
1786                                }
1787#endif
1788                                flag_restore = 0;
1789                                if (!rpipe) {
1790                                        flag_rep = 0;
1791                                        rpipe = pi;
1792                                }
1793                }
1794                rmode = pi->r_mode;
1795                debug_printf("rmode=%d  if_code=%d  next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode);
1796                if (rmode == skip_more_in_this_rmode && flag_skip) {
1797                        if (pi->followup == PIPE_SEQ) flag_skip=0;
1798                        continue;
1799                }
1800                flag_skip = 1;
1801                skip_more_in_this_rmode = RES_XXXX;
1802                if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code;
1803                if (rmode == RES_THEN &&  if_code) continue;
1804                if (rmode == RES_ELSE && !if_code) continue;
1805                if (rmode == RES_ELIF && !if_code) break;
1806                if (rmode == RES_FOR && pi->num_progs) {
1807                        if (!list) {
1808                                /* if no variable values after "in" we skip "for" */
1809                                if (!pi->next->progs->argv) continue;
1810                                /* create list of variable values */
1811                                list = make_list_in(pi->next->progs->argv,
1812                                        pi->progs->argv[0]);
1813                                save_list = list;
1814                                save_name = pi->progs->argv[0];
1815                                pi->progs->argv[0] = NULL;
1816                                flag_rep = 1;
1817                        }
1818                        if (!(*list)) {
1819                                free(pi->progs->argv[0]);
1820                                free(save_list);
1821                                list = NULL;
1822                                flag_rep = 0;
1823                                pi->progs->argv[0] = save_name;
1824#ifndef __U_BOOT__
1825                                pi->progs->glob_result.gl_pathv[0] =
1826                                        pi->progs->argv[0];
1827#endif
1828                                continue;
1829                        } else {
1830                                /* insert new value from list for variable */
1831                                if (pi->progs->argv[0])
1832                                        free(pi->progs->argv[0]);
1833                                pi->progs->argv[0] = *list++;
1834#ifndef __U_BOOT__
1835                                pi->progs->glob_result.gl_pathv[0] =
1836                                        pi->progs->argv[0];
1837#endif
1838                        }
1839                }
1840                if (rmode == RES_IN) continue;
1841                if (rmode == RES_DO) {
1842                        if (!flag_rep) continue;
1843                }
1844                if (rmode == RES_DONE) {
1845                        if (flag_rep) {
1846                                flag_restore = 1;
1847                        } else {
1848                                rpipe = NULL;
1849                        }
1850                }
1851                if (pi->num_progs == 0) continue;
1852#ifndef __U_BOOT__
1853                save_num_progs = pi->num_progs; /* save number of programs */
1854#endif
1855                rcode = run_pipe_real(pi);
1856                debug_printf("run_pipe_real returned %d\n",rcode);
1857#ifndef __U_BOOT__
1858                if (rcode!=-1) {
1859                        /* We only ran a builtin: rcode was set by the return value
1860                         * of run_pipe_real(), and we don't need to wait for anything. */
1861                } else if (pi->followup==PIPE_BG) {
1862                        /* XXX check bash's behavior with nontrivial pipes */
1863                        /* XXX compute jobid */
1864                        /* XXX what does bash do with attempts to background builtins? */
1865                        insert_bg_job(pi);
1866                        rcode = EXIT_SUCCESS;
1867                } else {
1868                        if (interactive) {
1869                                /* move the new process group into the foreground */
1870                                if (tcsetpgrp(shell_terminal, pi->pgrp) && errno != ENOTTY)
1871                                        perror_msg("tcsetpgrp-3");
1872                                rcode = checkjobs(pi);
1873                                /* move the shell to the foreground */
1874                                if (tcsetpgrp(shell_terminal, getpgid(0)) && errno != ENOTTY)
1875                                        perror_msg("tcsetpgrp-4");
1876                        } else {
1877                                rcode = checkjobs(pi);
1878                        }
1879                        debug_printf("checkjobs returned %d\n",rcode);
1880                }
1881                last_return_code=rcode;
1882#else
1883                if (rcode < -1) {
1884                        last_return_code = -rcode - 2;
1885                        return -2;      /* exit */
1886                }
1887                last_return_code=(rcode == 0) ? 0 : 1;
1888#endif
1889#ifndef __U_BOOT__
1890                pi->num_progs = save_num_progs; /* restore number of programs */
1891#endif
1892                if ( rmode == RES_IF || rmode == RES_ELIF )
1893                        next_if_code=rcode;  /* can be overwritten a number of times */
1894                if (rmode == RES_WHILE)
1895                        flag_rep = !last_return_code;
1896                if (rmode == RES_UNTIL)
1897                        flag_rep = last_return_code;
1898                if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) ||
1899                     (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) )
1900                        skip_more_in_this_rmode=rmode;
1901#ifndef __U_BOOT__
1902                checkjobs(NULL);
1903#endif
1904        }
1905        return rcode;
1906}
1907
1908/* broken, of course, but OK for testing */
1909static char *indenter(int i)
1910{
1911        static char blanks[]="                                    ";
1912        return &blanks[sizeof(blanks)-i-1];
1913}
1914
1915/* return code is the exit status of the pipe */
1916static int free_pipe(struct pipe *pi, int indent)
1917{
1918        char **p;
1919        struct child_prog *child;
1920#ifndef __U_BOOT__
1921        struct redir_struct *r, *rnext;
1922#endif
1923        int a, i, ret_code=0;
1924        char *ind = indenter(indent);
1925
1926#ifndef __U_BOOT__
1927        if (pi->stopped_progs > 0)
1928                return ret_code;
1929        final_printf("%s run pipe: (pid %d)\n",ind,getpid());
1930#endif
1931        for (i=0; i<pi->num_progs; i++) {
1932                child = &pi->progs[i];
1933                final_printf("%s  command %d:\n",ind,i);
1934                if (child->argv) {
1935                        for (a=0,p=child->argv; *p; a++,p++) {
1936                                final_printf("%s   argv[%d] = %s\n",ind,a,*p);
1937                        }
1938#ifndef __U_BOOT__
1939                        globfree(&child->glob_result);
1940#else
1941                        for (a = 0; a < child->argc; a++) {
1942                                free(child->argv[a]);
1943                        }
1944                        free(child->argv);
1945                        free(child->argv_nonnull);
1946                        child->argc = 0;
1947#endif
1948                        child->argv=NULL;
1949                } else if (child->group) {
1950#ifndef __U_BOOT__
1951                        final_printf("%s   begin group (subshell:%d)\n",ind, child->subshell);
1952#endif
1953                        ret_code = free_pipe_list(child->group,indent+3);
1954                        final_printf("%s   end group\n",ind);
1955                } else {
1956                        final_printf("%s   (nil)\n",ind);
1957                }
1958#ifndef __U_BOOT__
1959                for (r=child->redirects; r; r=rnext) {
1960                        final_printf("%s   redirect %d%s", ind, r->fd, redir_table[r->type].descrip);
1961                        if (r->dup == -1) {
1962                                /* guard against the case >$FOO, where foo is unset or blank */
1963                                if (r->word.gl_pathv) {
1964                                        final_printf(" %s\n", *r->word.gl_pathv);
1965                                        globfree(&r->word);
1966                                }
1967                        } else {
1968                                final_printf("&%d\n", r->dup);
1969                        }
1970                        rnext=r->next;
1971                        free(r);
1972                }
1973                child->redirects=NULL;
1974#endif
1975        }
1976        free(pi->progs);   /* children are an array, they get freed all at once */
1977        pi->progs=NULL;
1978        return ret_code;
1979}
1980
1981static int free_pipe_list(struct pipe *head, int indent)
1982{
1983        int rcode=0;   /* if list has no members */
1984        struct pipe *pi, *next;
1985        char *ind = indenter(indent);
1986        for (pi=head; pi; pi=next) {
1987                final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode);
1988                rcode = free_pipe(pi, indent);
1989                final_printf("%s pipe followup code %d\n", ind, pi->followup);
1990                next=pi->next;
1991                pi->next=NULL;
1992                free(pi);
1993        }
1994        return rcode;
1995}
1996
1997/* Select which version we will use */
1998static int run_list(struct pipe *pi)
1999{
2000        int rcode=0;
2001#ifndef __U_BOOT__
2002        if (fake_mode==0) {
2003#endif
2004                rcode = run_list_real(pi);
2005#ifndef __U_BOOT__
2006        }
2007#endif
2008        /* free_pipe_list has the side effect of clearing memory
2009         * In the long run that function can be merged with run_list_real,
2010         * but doing that now would hobble the debugging effort. */
2011        free_pipe_list(pi,0);
2012        return rcode;
2013}
2014
2015/* The API for glob is arguably broken.  This routine pushes a non-matching
2016 * string into the output structure, removing non-backslashed backslashes.
2017 * If someone can prove me wrong, by performing this function within the
2018 * original glob(3) api, feel free to rewrite this routine into oblivion.
2019 * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
2020 * XXX broken if the last character is '\\', check that before calling.
2021 */
2022#ifndef __U_BOOT__
2023static int globhack(const char *src, int flags, glob_t *pglob)
2024{
2025        int cnt=0, pathc;
2026        const char *s;
2027        char *dest;
2028        for (cnt=1, s=src; s && *s; s++) {
2029                if (*s == '\\') s++;
2030                cnt++;
2031        }
2032        dest = malloc(cnt);
2033        if (!dest) return GLOB_NOSPACE;
2034        if (!(flags & GLOB_APPEND)) {
2035                pglob->gl_pathv=NULL;
2036                pglob->gl_pathc=0;
2037                pglob->gl_offs=0;
2038                pglob->gl_offs=0;
2039        }
2040        pathc = ++pglob->gl_pathc;
2041        pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv));
2042        if (pglob->gl_pathv == NULL) return GLOB_NOSPACE;
2043        pglob->gl_pathv[pathc-1]=dest;
2044        pglob->gl_pathv[pathc]=NULL;
2045        for (s=src; s && *s; s++, dest++) {
2046                if (*s == '\\') s++;
2047                *dest = *s;
2048        }
2049        *dest='\0';
2050        return 0;
2051}
2052
2053/* XXX broken if the last character is '\\', check that before calling */
2054static int glob_needed(const char *s)
2055{
2056        for (; *s; s++) {
2057                if (*s == '\\') s++;
2058                if (strchr("*[?",*s)) return 1;
2059        }
2060        return 0;
2061}
2062
2063#if 0
2064static void globprint(glob_t *pglob)
2065{
2066        int i;
2067        debug_printf("glob_t at %p:\n", pglob);
2068        debug_printf("  gl_pathc=%d  gl_pathv=%p  gl_offs=%d  gl_flags=%d\n",
2069                pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags);
2070        for (i=0; i<pglob->gl_pathc; i++)
2071                debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i,
2072                        pglob->gl_pathv[i], pglob->gl_pathv[i]);
2073}
2074#endif
2075
2076static int xglob(o_string *dest, int flags, glob_t *pglob)
2077{
2078        int gr;
2079
2080        /* short-circuit for null word */
2081        /* we can code this better when the debug_printf's are gone */
2082        if (dest->length == 0) {
2083                if (dest->nonnull) {
2084                        /* bash man page calls this an "explicit" null */
2085                        gr = globhack(dest->data, flags, pglob);
2086                        debug_printf("globhack returned %d\n",gr);
2087                } else {
2088                        return 0;
2089                }
2090        } else if (glob_needed(dest->data)) {
2091                gr = glob(dest->data, flags, NULL, pglob);
2092                debug_printf("glob returned %d\n",gr);
2093                if (gr == GLOB_NOMATCH) {
2094                        /* quote removal, or more accurately, backslash removal */
2095                        gr = globhack(dest->data, flags, pglob);
2096                        debug_printf("globhack returned %d\n",gr);
2097                }
2098        } else {
2099                gr = globhack(dest->data, flags, pglob);
2100                debug_printf("globhack returned %d\n",gr);
2101        }
2102        if (gr == GLOB_NOSPACE)
2103                error_msg_and_die("out of memory during glob");
2104        if (gr != 0) { /* GLOB_ABORTED ? */
2105                error_msg("glob(3) error %d",gr);
2106        }
2107        /* globprint(glob_target); */
2108        return gr;
2109}
2110#endif
2111
2112#ifdef __U_BOOT__
2113static char *get_dollar_var(char ch);
2114#endif
2115
2116/* This is used to get/check local shell variables */
2117char *get_local_var(const char *s)
2118{
2119        struct variables *cur;
2120
2121        if (!s)
2122                return NULL;
2123
2124#ifdef __U_BOOT__
2125        if (*s == '$')
2126                return get_dollar_var(s[1]);
2127#endif
2128
2129        for (cur = top_vars; cur; cur=cur->next)
2130                if(strcmp(cur->name, s)==0)
2131                        return cur->value;
2132        return NULL;
2133}
2134
2135/* This is used to set local shell variables
2136   flg_export==0 if only local (not exporting) variable
2137   flg_export==1 if "new" exporting environ
2138   flg_export>1  if current startup environ (not call putenv()) */
2139int set_local_var(const char *s, int flg_export)
2140{
2141        char *name, *value;
2142        int result=0;
2143        struct variables *cur;
2144
2145#ifdef __U_BOOT__
2146        /* might be possible! */
2147        if (!isalpha(*s))
2148                return -1;
2149#endif
2150
2151        name=strdup(s);
2152
2153#ifdef __U_BOOT__
2154        if (getenv(name) != NULL) {
2155                printf ("ERROR: "
2156                                "There is a global environment variable with the same name.\n");
2157                free(name);
2158                return -1;
2159        }
2160#endif
2161        /* Assume when we enter this function that we are already in
2162         * NAME=VALUE format.  So the first order of business is to
2163         * split 's' on the '=' into 'name' and 'value' */
2164        value = strchr(name, '=');
2165        if (value == NULL || *(value + 1) == 0) {
2166                free(name);
2167                return -1;
2168        }
2169        *value++ = 0;
2170
2171        for(cur = top_vars; cur; cur = cur->next) {
2172                if(strcmp(cur->name, name)==0)
2173                        break;
2174        }
2175
2176        if(cur) {
2177                if(strcmp(cur->value, value)==0) {
2178                        if(flg_export>0 && cur->flg_export==0)
2179                                cur->flg_export=flg_export;
2180                        else
2181                                result++;
2182                } else {
2183                        if(cur->flg_read_only) {
2184                                error_msg("%s: readonly variable", name);
2185                                result = -1;
2186                        } else {
2187                                if(flg_export>0 || cur->flg_export>1)
2188                                        cur->flg_export=1;
2189                                free(cur->value);
2190
2191                                cur->value = strdup(value);
2192                        }
2193                }
2194        } else {
2195                cur = malloc(sizeof(struct variables));
2196                if(!cur) {
2197                        result = -1;
2198                } else {
2199                        cur->name = strdup(name);
2200                        if (cur->name == NULL) {
2201                                free(cur);
2202                                result = -1;
2203                        } else {
2204                                struct variables *bottom = top_vars;
2205                                cur->value = strdup(value);
2206                                cur->next = NULL;
2207                                cur->flg_export = flg_export;
2208                                cur->flg_read_only = 0;
2209                                while(bottom->next) bottom=bottom->next;
2210                                bottom->next = cur;
2211                        }
2212                }
2213        }
2214
2215#ifndef __U_BOOT__
2216        if(result==0 && cur->flg_export==1) {
2217                *(value-1) = '=';
2218                result = putenv(name);
2219        } else {
2220#endif
2221                free(name);
2222#ifndef __U_BOOT__
2223                if(result>0)            /* equivalent to previous set */
2224                        result = 0;
2225        }
2226#endif
2227        return result;
2228}
2229
2230void unset_local_var(const char *name)
2231{
2232        struct variables *cur;
2233
2234        if (name) {
2235                for (cur = top_vars; cur; cur=cur->next) {
2236                        if(strcmp(cur->name, name)==0)
2237                                break;
2238                }
2239                if (cur != NULL) {
2240                        struct variables *next = top_vars;
2241                        if(cur->flg_read_only) {
2242                                error_msg("%s: readonly variable", name);
2243                                return;
2244                        } else {
2245#ifndef __U_BOOT__
2246                                if(cur->flg_export)
2247                                        unsetenv(cur->name);
2248#endif
2249                                free(cur->name);
2250                                free(cur->value);
2251                                while (next->next != cur)
2252                                        next = next->next;
2253                                next->next = cur->next;
2254                        }
2255                        free(cur);
2256                }
2257        }
2258}
2259
2260static int is_assignment(const char *s)
2261{
2262        if (s == NULL)
2263                return 0;
2264
2265        if (!isalpha(*s)) return 0;
2266        ++s;
2267        while(isalnum(*s) || *s=='_') ++s;
2268        return *s=='=';
2269}
2270
2271#ifndef __U_BOOT__
2272/* the src parameter allows us to peek forward to a possible &n syntax
2273 * for file descriptor duplication, e.g., "2>&1".
2274 * Return code is 0 normally, 1 if a syntax error is detected in src.
2275 * Resource errors (in xmalloc) cause the process to exit */
2276static int setup_redirect(struct p_context *ctx, int fd, redir_type style,
2277        struct in_str *input)
2278{
2279        struct child_prog *child=ctx->child;
2280        struct redir_struct *redir = child->redirects;
2281        struct redir_struct *last_redir=NULL;
2282
2283        /* Create a new redir_struct and drop it onto the end of the linked list */
2284        while(redir) {
2285                last_redir=redir;
2286                redir=redir->next;
2287        }
2288        redir = xmalloc(sizeof(struct redir_struct));
2289        redir->next=NULL;
2290        redir->word.gl_pathv=NULL;
2291        if (last_redir) {
2292                last_redir->next=redir;
2293        } else {
2294                child->redirects=redir;
2295        }
2296
2297        redir->type=style;
2298        redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ;
2299
2300        debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip);
2301
2302        /* Check for a '2>&1' type redirect */
2303        redir->dup = redirect_dup_num(input);
2304        if (redir->dup == -2) return 1;  /* syntax error */
2305        if (redir->dup != -1) {
2306                /* Erik had a check here that the file descriptor in question
2307                 * is legit; I postpone that to "run time"
2308                 * A "-" representation of "close me" shows up as a -3 here */
2309                debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup);
2310        } else {
2311                /* We do _not_ try to open the file that src points to,
2312                 * since we need to return and let src be expanded first.
2313                 * Set ctx->pending_redirect, so we know what to do at the
2314                 * end of the next parsed word.
2315                 */
2316                ctx->pending_redirect = redir;
2317        }
2318        return 0;
2319}
2320#endif
2321
2322static struct pipe *new_pipe(void)
2323{
2324        struct pipe *pi;
2325        pi = xmalloc(sizeof(struct pipe));
2326        pi->num_progs = 0;
2327        pi->progs = NULL;
2328        pi->next = NULL;
2329        pi->followup = 0;  /* invalid */
2330        pi->r_mode = RES_NONE;
2331        return pi;
2332}
2333
2334static void initialize_context(struct p_context *ctx)
2335{
2336        ctx->pipe=NULL;
2337#ifndef __U_BOOT__
2338        ctx->pending_redirect=NULL;
2339#endif
2340        ctx->child=NULL;
2341        ctx->list_head=new_pipe();
2342        ctx->pipe=ctx->list_head;
2343        ctx->w=RES_NONE;
2344        ctx->stack=NULL;
2345#ifdef __U_BOOT__
2346        ctx->old_flag=0;
2347#endif
2348        done_command(ctx);   /* creates the memory for working child */
2349}
2350
2351/* normal return is 0
2352 * if a reserved word is found, and processed, return 1
2353 * should handle if, then, elif, else, fi, for, while, until, do, done.
2354 * case, function, and select are obnoxious, save those for later.
2355 */
2356struct reserved_combo {
2357        char *literal;
2358        int code;
2359        long flag;
2360};
2361/* Mostly a list of accepted follow-up reserved words.
2362 * FLAG_END means we are done with the sequence, and are ready
2363 * to turn the compound list into a command.
2364 * FLAG_START means the word must start a new compound list.
2365 */
2366static struct reserved_combo reserved_list[] = {
2367        { "if",    RES_IF,    FLAG_THEN | FLAG_START },
2368        { "then",  RES_THEN,  FLAG_ELIF | FLAG_ELSE | FLAG_FI },
2369        { "elif",  RES_ELIF,  FLAG_THEN },
2370        { "else",  RES_ELSE,  FLAG_FI   },
2371        { "fi",    RES_FI,    FLAG_END  },
2372        { "for",   RES_FOR,   FLAG_IN   | FLAG_START },
2373        { "while", RES_WHILE, FLAG_DO   | FLAG_START },
2374        { "until", RES_UNTIL, FLAG_DO   | FLAG_START },
2375        { "in",    RES_IN,    FLAG_DO   },
2376        { "do",    RES_DO,    FLAG_DONE },
2377        { "done",  RES_DONE,  FLAG_END  }
2378};
2379#define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
2380
2381static int reserved_word(o_string *dest, struct p_context *ctx)
2382{
2383        struct reserved_combo *r;
2384        for (r=reserved_list;
2385                r<reserved_list+NRES; r++) {
2386                if (strcmp(dest->data, r->literal) == 0) {
2387                        debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
2388                        if (r->flag & FLAG_START) {
2389                                struct p_context *new = xmalloc(sizeof(struct p_context));
2390                                debug_printf("push stack\n");
2391                                if (ctx->w == RES_IN || ctx->w == RES_FOR) {
2392                                        syntax();
2393                                        free(new);
2394                                        ctx->w = RES_SNTX;
2395                                        b_reset(dest);
2396                                        return 1;
2397                                }
2398                                *new = *ctx;   /* physical copy */
2399                                initialize_context(ctx);
2400                                ctx->stack=new;
2401                        } else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) {
2402                                syntax();
2403                                ctx->w = RES_SNTX;
2404                                b_reset(dest);
2405                                return 1;
2406                        }
2407                        ctx->w=r->code;
2408                        ctx->old_flag = r->flag;
2409                        if (ctx->old_flag & FLAG_END) {
2410                                struct p_context *old;
2411                                debug_printf("pop stack\n");
2412                                done_pipe(ctx,PIPE_SEQ);
2413                                old = ctx->stack;
2414                                old->child->group = ctx->list_head;
2415#ifndef __U_BOOT__
2416                                old->child->subshell = 0;
2417#endif
2418                                *ctx = *old;   /* physical copy */
2419                                free(old);
2420                        }
2421                        b_reset (dest);
2422                        return 1;
2423                }
2424        }
2425        return 0;
2426}
2427
2428/* normal return is 0.
2429 * Syntax or xglob errors return 1. */
2430static int done_word(o_string *dest, struct p_context *ctx)
2431{
2432        struct child_prog *child=ctx->child;
2433#ifndef __U_BOOT__
2434        glob_t *glob_target;
2435        int gr, flags = 0;
2436#else
2437        char *str, *s;
2438        int argc, cnt;
2439#endif
2440
2441        debug_printf("done_word: %s %p\n", dest->data, child);
2442        if (dest->length == 0 && !dest->nonnull) {
2443                debug_printf("  true null, ignored\n");
2444                return 0;
2445        }
2446#ifndef __U_BOOT__
2447        if (ctx->pending_redirect) {
2448                glob_target = &ctx->pending_redirect->word;
2449        } else {
2450#endif
2451                if (child->group) {
2452                        syntax();
2453                        return 1;  /* syntax error, groups and arglists don't mix */
2454                }
2455                if (!child->argv && (ctx->type & FLAG_PARSE_SEMICOLON)) {
2456                        debug_printf("checking %s for reserved-ness\n",dest->data);
2457                        if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX;
2458                }
2459#ifndef __U_BOOT__
2460                glob_target = &child->glob_result;
2461                if (child->argv) flags |= GLOB_APPEND;
2462#else
2463                for (cnt = 1, s = dest->data; s && *s; s++) {
2464                        if (*s == '\\') s++;
2465                        cnt++;
2466                }
2467                str = malloc(cnt);
2468                if (!str) return 1;
2469                if ( child->argv == NULL) {
2470                        child->argc=0;
2471                }
2472                argc = ++child->argc;
2473                child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv));
2474                if (child->argv == NULL) {
2475                        free(str);
2476                        return 1;
2477                }
2478                child->argv_nonnull = realloc(child->argv_nonnull,
2479                                        (argc+1)*sizeof(*child->argv_nonnull));
2480                if (child->argv_nonnull == NULL) {
2481                        free(str);
2482                        return 1;
2483                }
2484                child->argv[argc-1]=str;
2485                child->argv_nonnull[argc-1] = dest->nonnull;
2486                child->argv[argc]=NULL;
2487                child->argv_nonnull[argc] = 0;
2488                for (s = dest->data; s && *s; s++,str++) {
2489                        if (*s == '\\') s++;
2490                        *str = *s;
2491                }
2492                *str = '\0';
2493#endif
2494#ifndef __U_BOOT__
2495        }
2496        gr = xglob(dest, flags, glob_target);
2497        if (gr != 0) return 1;
2498#endif
2499
2500        b_reset(dest);
2501#ifndef __U_BOOT__
2502        if (ctx->pending_redirect) {
2503                ctx->pending_redirect=NULL;
2504                if (glob_target->gl_pathc != 1) {
2505                        error_msg("ambiguous redirect");
2506                        return 1;
2507                }
2508        } else {
2509                child->argv = glob_target->gl_pathv;
2510        }
2511#endif
2512        if (ctx->w == RES_FOR) {
2513                done_word(dest,ctx);
2514                done_pipe(ctx,PIPE_SEQ);
2515        }
2516        return 0;
2517}
2518
2519/* The only possible error here is out of memory, in which case
2520 * xmalloc exits. */
2521static int done_command(struct p_context *ctx)
2522{
2523        /* The child is really already in the pipe structure, so
2524         * advance the pipe counter and make a new, null child.
2525         * Only real trickiness here is that the uncommitted
2526         * child structure, to which ctx->child points, is not
2527         * counted in pi->num_progs. */
2528        struct pipe *pi=ctx->pipe;
2529        struct child_prog *prog=ctx->child;
2530
2531        if (prog && prog->group == NULL
2532                 && prog->argv == NULL
2533#ifndef __U_BOOT__
2534                 && prog->redirects == NULL) {
2535#else
2536                                                                                ) {
2537#endif
2538                debug_printf("done_command: skipping null command\n");
2539                return 0;
2540        } else if (prog) {
2541                pi->num_progs++;
2542                debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs);
2543        } else {
2544                debug_printf("done_command: initializing\n");
2545        }
2546        pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1));
2547
2548        prog = pi->progs + pi->num_progs;
2549#ifndef __U_BOOT__
2550        prog->redirects = NULL;
2551#endif
2552        prog->argv = NULL;
2553        prog->argv_nonnull = NULL;
2554#ifndef __U_BOOT__
2555        prog->is_stopped = 0;
2556#endif
2557        prog->group = NULL;
2558#ifndef __U_BOOT__
2559        prog->glob_result.gl_pathv = NULL;
2560        prog->family = pi;
2561#endif
2562        prog->sp = 0;
2563        ctx->child = prog;
2564        prog->type = ctx->type;
2565
2566        /* but ctx->pipe and ctx->list_head remain unchanged */
2567        return 0;
2568}
2569
2570static int done_pipe(struct p_context *ctx, pipe_style type)
2571{
2572        struct pipe *new_p;
2573        done_command(ctx);  /* implicit closure of previous command */
2574        debug_printf("done_pipe, type %d\n", type);
2575        ctx->pipe->followup = type;
2576        ctx->pipe->r_mode = ctx->w;
2577        new_p=new_pipe();
2578        ctx->pipe->next = new_p;
2579        ctx->pipe = new_p;
2580        ctx->child = NULL;
2581        done_command(ctx);  /* set up new pipe to accept commands */
2582        return 0;
2583}
2584
2585#ifndef __U_BOOT__
2586/* peek ahead in the in_str to find out if we have a "&n" construct,
2587 * as in "2>&1", that represents duplicating a file descriptor.
2588 * returns either -2 (syntax error), -1 (no &), or the number found.
2589 */
2590static int redirect_dup_num(struct in_str *input)
2591{
2592        int ch, d=0, ok=0;
2593        ch = b_peek(input);
2594        if (ch != '&') return -1;
2595
2596        b_getch(input);  /* get the & */
2597        ch=b_peek(input);
2598        if (ch == '-') {
2599                b_getch(input);
2600                return -3;  /* "-" represents "close me" */
2601        }
2602        while (isdigit(ch)) {
2603                d = d*10+(ch-'0');
2604                ok=1;
2605                b_getch(input);
2606                ch = b_peek(input);
2607        }
2608        if (ok) return d;
2609
2610        error_msg("ambiguous redirect");
2611        return -2;
2612}
2613
2614/* If a redirect is immediately preceded by a number, that number is
2615 * supposed to tell which file descriptor to redirect.  This routine
2616 * looks for such preceding numbers.  In an ideal world this routine
2617 * needs to handle all the following classes of redirects...
2618 *     echo 2>foo     # redirects fd  2 to file "foo", nothing passed to echo
2619 *     echo 49>foo    # redirects fd 49 to file "foo", nothing passed to echo
2620 *     echo -2>foo    # redirects fd  1 to file "foo",    "-2" passed to echo
2621 *     echo 49x>foo   # redirects fd  1 to file "foo",   "49x" passed to echo
2622 * A -1 output from this program means no valid number was found, so the
2623 * caller should use the appropriate default for this redirection.
2624 */
2625static int redirect_opt_num(o_string *o)
2626{
2627        int num;
2628
2629        if (o->length==0) return -1;
2630        for(num=0; num<o->length; num++) {
2631                if (!isdigit(*(o->data+num))) {
2632                        return -1;
2633                }
2634        }
2635        /* reuse num (and save an int) */
2636        num=atoi(o->data);
2637        b_reset(o);
2638        return num;
2639}
2640
2641FILE *generate_stream_from_list(struct pipe *head)
2642{
2643        FILE *pf;
2644#if 1
2645        int pid, channel[2];
2646        if (pipe(channel)<0) perror_msg_and_die("pipe");
2647        pid=fork();
2648        if (pid<0) {
2649                perror_msg_and_die("fork");
2650        } else if (pid==0) {
2651                close(channel[0]);
2652                if (channel[1] != 1) {
2653                        dup2(channel[1],1);
2654                        close(channel[1]);
2655                }
2656#if 0
2657#define SURROGATE "surrogate response"
2658                write(1,SURROGATE,sizeof(SURROGATE));
2659                _exit(run_list(head));
2660#else
2661                _exit(run_list_real(head));   /* leaks memory */
2662#endif
2663        }
2664        debug_printf("forked child %d\n",pid);
2665        close(channel[1]);
2666        pf = fdopen(channel[0],"r");
2667        debug_printf("pipe on FILE *%p\n",pf);
2668#else
2669        free_pipe_list(head,0);
2670        pf=popen("echo surrogate response","r");
2671        debug_printf("started fake pipe on FILE *%p\n",pf);
2672#endif
2673        return pf;
2674}
2675
2676/* this version hacked for testing purposes */
2677/* return code is exit status of the process that is run. */
2678static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end)
2679{
2680        int retcode;
2681        o_string result=NULL_O_STRING;
2682        struct p_context inner;
2683        FILE *p;
2684        struct in_str pipe_str;
2685        initialize_context(&inner);
2686
2687        /* recursion to generate command */
2688        retcode = parse_stream(&result, &inner, input, subst_end);
2689        if (retcode != 0) return retcode;  /* syntax error or EOF */
2690        done_word(&result, &inner);
2691        done_pipe(&inner, PIPE_SEQ);
2692        b_free(&result);
2693
2694        p=generate_stream_from_list(inner.list_head);
2695        if (p==NULL) return 1;
2696        mark_open(fileno(p));
2697        setup_file_in_str(&pipe_str, p);
2698
2699        /* now send results of command back into original context */
2700        retcode = parse_stream(dest, ctx, &pipe_str, '\0');
2701        /* XXX In case of a syntax error, should we try to kill the child?
2702         * That would be tough to do right, so just read until EOF. */
2703        if (retcode == 1) {
2704                while (b_getch(&pipe_str)!=EOF) { /* discard */ };
2705        }
2706
2707        debug_printf("done reading from pipe, pclose()ing\n");
2708        /* This is the step that wait()s for the child.  Should be pretty
2709         * safe, since we just read an EOF from its stdout.  We could try
2710         * to better, by using wait(), and keeping track of background jobs
2711         * at the same time.  That would be a lot of work, and contrary
2712         * to the KISS philosophy of this program. */
2713        mark_closed(fileno(p));
2714        retcode=pclose(p);
2715        free_pipe_list(inner.list_head,0);
2716        debug_printf("pclosed, retcode=%d\n",retcode);
2717        /* XXX this process fails to trim a single trailing newline */
2718        return retcode;
2719}
2720
2721static int parse_group(o_string *dest, struct p_context *ctx,
2722        struct in_str *input, int ch)
2723{
2724        int rcode, endch=0;
2725        struct p_context sub;
2726        struct child_prog *child = ctx->child;
2727        if (child->argv) {
2728                syntax();
2729                return 1;  /* syntax error, groups and arglists don't mix */
2730        }
2731        initialize_context(&sub);
2732        switch(ch) {
2733                case '(': endch=')'; child->subshell=1; break;
2734                case '{': endch='}'; break;
2735                default: syntax();   /* really logic error */
2736        }
2737        rcode=parse_stream(dest,&sub,input,endch);
2738        done_word(dest,&sub); /* finish off the final word in the subcontext */
2739        done_pipe(&sub, PIPE_SEQ);  /* and the final command there, too */
2740        child->group = sub.list_head;
2741        return rcode;
2742        /* child remains "open", available for possible redirects */
2743}
2744#endif
2745
2746/* basically useful version until someone wants to get fancier,
2747 * see the bash man page under "Parameter Expansion" */
2748static char *lookup_param(char *src)
2749{
2750        char *p;
2751        char *sep;
2752        char *default_val = NULL;
2753        int assign = 0;
2754        int expand_empty = 0;
2755
2756        if (!src)
2757                return NULL;
2758
2759        sep = strchr(src, ':');
2760
2761        if (sep) {
2762                *sep = '\0';
2763                if (*(sep + 1) == '-')
2764                        default_val = sep+2;
2765                if (*(sep + 1) == '=') {
2766                        default_val = sep+2;
2767                        assign = 1;
2768                }
2769                if (*(sep + 1) == '+') {
2770                        default_val = sep+2;
2771                        expand_empty = 1;
2772                }
2773        }
2774
2775        p = getenv(src);
2776        if (!p)
2777                p = get_local_var(src);
2778
2779        if (!p || strlen(p) == 0) {
2780                p = default_val;
2781                if (assign) {
2782                        char *var = malloc(strlen(src)+strlen(default_val)+2);
2783                        if (var) {
2784                                sprintf(var, "%s=%s", src, default_val);
2785                                set_local_var(var, 0);
2786                        }
2787                        free(var);
2788                }
2789        } else if (expand_empty) {
2790                p += strlen(p);
2791        }
2792
2793        if (sep)
2794                *sep = ':';
2795
2796        return p;
2797}
2798
2799#ifdef __U_BOOT__
2800static char *get_dollar_var(char ch)
2801{
2802        static char buf[40];
2803
2804        buf[0] = '\0';
2805        switch (ch) {
2806                case '?':
2807                        sprintf(buf, "%u", (unsigned int)last_return_code);
2808                        break;
2809                default:
2810                        return NULL;
2811        }
2812        return buf;
2813}
2814#endif
2815
2816/* return code: 0 for OK, 1 for syntax error */
2817static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input)
2818{
2819#ifndef __U_BOOT__
2820        int i, advance=0;
2821#else
2822        int advance=0;
2823#endif
2824#ifndef __U_BOOT__
2825        char sep[]=" ";
2826#endif
2827        int ch = input->peek(input);  /* first character after the $ */
2828        debug_printf("handle_dollar: ch=%c\n",ch);
2829        if (isalpha(ch)) {
2830                b_addchr(dest, SPECIAL_VAR_SYMBOL);
2831                ctx->child->sp++;
2832                while(ch=b_peek(input),isalnum(ch) || ch=='_') {
2833                        b_getch(input);
2834                        b_addchr(dest,ch);
2835                }
2836                b_addchr(dest, SPECIAL_VAR_SYMBOL);
2837#ifndef __U_BOOT__
2838        } else if (isdigit(ch)) {
2839                i = ch-'0';  /* XXX is $0 special? */
2840                if (i<global_argc) {
2841                        parse_string(dest, ctx, global_argv[i]); /* recursion */
2842                }
2843                advance = 1;
2844#endif
2845        } else switch (ch) {
2846#ifndef __U_BOOT__
2847                case '$':
2848                        b_adduint(dest,getpid());
2849                        advance = 1;
2850                        break;
2851                case '!':
2852                        if (last_bg_pid > 0) b_adduint(dest, last_bg_pid);
2853                        advance = 1;
2854                        break;
2855#endif
2856                case '?':
2857#ifndef __U_BOOT__
2858                        b_adduint(dest,last_return_code);
2859#else
2860                        ctx->child->sp++;
2861                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2862                        b_addchr(dest, '$');
2863                        b_addchr(dest, '?');
2864                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2865#endif
2866                        advance = 1;
2867                        break;
2868#ifndef __U_BOOT__
2869                case '#':
2870                        b_adduint(dest,global_argc ? global_argc-1 : 0);
2871                        advance = 1;
2872                        break;
2873#endif
2874                case '{':
2875                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2876                        ctx->child->sp++;
2877                        b_getch(input);
2878                        /* XXX maybe someone will try to escape the '}' */
2879                        while(ch=b_getch(input),ch!=EOF && ch!='}') {
2880                                b_addchr(dest,ch);
2881                        }
2882                        if (ch != '}') {
2883                                syntax();
2884                                return 1;
2885                        }
2886                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2887                        break;
2888#ifndef __U_BOOT__
2889                case '(':
2890                        b_getch(input);
2891                        process_command_subs(dest, ctx, input, ')');
2892                        break;
2893                case '*':
2894                        sep[0]=ifs[0];
2895                        for (i=1; i<global_argc; i++) {
2896                                parse_string(dest, ctx, global_argv[i]);
2897                                if (i+1 < global_argc) parse_string(dest, ctx, sep);
2898                        }
2899                        break;
2900                case '@':
2901                case '-':
2902                case '_':
2903                        /* still unhandled, but should be eventually */
2904                        error_msg("unhandled syntax: $%c",ch);
2905                        return 1;
2906                        break;
2907#endif
2908                default:
2909                        b_addqchr(dest,'$',dest->quote);
2910        }
2911        /* Eat the character if the flag was set.  If the compiler
2912         * is smart enough, we could substitute "b_getch(input);"
2913         * for all the "advance = 1;" above, and also end up with
2914         * a nice size-optimized program.  Hah!  That'll be the day.
2915         */
2916        if (advance) b_getch(input);
2917        return 0;
2918}
2919
2920#ifndef __U_BOOT__
2921int parse_string(o_string *dest, struct p_context *ctx, const char *src)
2922{
2923        struct in_str foo;
2924        setup_string_in_str(&foo, src);
2925        return parse_stream(dest, ctx, &foo, '\0');
2926}
2927#endif
2928
2929/* return code is 0 for normal exit, 1 for syntax error */
2930static int parse_stream(o_string *dest, struct p_context *ctx,
2931                        struct in_str *input, int end_trigger)
2932{
2933        unsigned int ch, m;
2934#ifndef __U_BOOT__
2935        int redir_fd;
2936        redir_type redir_style;
2937#endif
2938        int next;
2939
2940        /* Only double-quote state is handled in the state variable dest->quote.
2941         * A single-quote triggers a bypass of the main loop until its mate is
2942         * found.  When recursing, quote state is passed in via dest->quote. */
2943
2944        debug_printf("parse_stream, end_trigger=%d\n",end_trigger);
2945        while ((ch=b_getch(input))!=EOF) {
2946                m = map[ch];
2947#ifdef __U_BOOT__
2948                if (input->__promptme == 0) return 1;
2949#endif
2950                next = (ch == '\n') ? 0 : b_peek(input);
2951
2952                debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d - %c\n",
2953                        ch >= ' ' ? ch : '.', ch, m,
2954                        dest->quote, ctx->stack == NULL ? '*' : '.');
2955
2956                if (m==0 || ((m==1 || m==2) && dest->quote)) {
2957                        b_addqchr(dest, ch, dest->quote);
2958                } else {
2959                        if (m==2) {  /* unquoted IFS */
2960                                if (done_word(dest, ctx)) {
2961                                        return 1;
2962                                }
2963                                /* If we aren't performing a substitution, treat a newline as a
2964                                 * command separator.  */
2965                                if (end_trigger != '\0' && ch=='\n')
2966                                        done_pipe(ctx,PIPE_SEQ);
2967                        }
2968                        if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) {
2969                                debug_printf("leaving parse_stream (triggered)\n");
2970                                return 0;
2971                        }
2972#if 0
2973                        if (ch=='\n') {
2974                                /* Yahoo!  Time to run with it! */
2975                                done_pipe(ctx,PIPE_SEQ);
2976                                run_list(ctx->list_head);
2977                                initialize_context(ctx);
2978                        }
2979#endif
2980                        if (m!=2) switch (ch) {
2981                case '#':
2982                        if (dest->length == 0 && !dest->quote) {
2983                                while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); }
2984                        } else {
2985                                b_addqchr(dest, ch, dest->quote);
2986                        }
2987                        break;
2988                case '\\':
2989                        if (next == EOF) {
2990                                syntax();
2991                                return 1;
2992                        }
2993                        b_addqchr(dest, '\\', dest->quote);
2994                        b_addqchr(dest, b_getch(input), dest->quote);
2995                        break;
2996                case '$':
2997                        if (handle_dollar(dest, ctx, input)!=0) return 1;
2998                        break;
2999                case '\'':
3000                        dest->nonnull = 1;
3001                        while(ch=b_getch(input),ch!=EOF && ch!='\'') {
3002#ifdef __U_BOOT__
3003                                if(input->__promptme == 0) return 1;
3004#endif
3005                                b_addchr(dest,ch);
3006                        }
3007                        if (ch==EOF) {
3008                                syntax();
3009                                return 1;
3010                        }
3011                        break;
3012                case '"':
3013                        dest->nonnull = 1;
3014                        dest->quote = !dest->quote;
3015                        break;
3016#ifndef __U_BOOT__
3017                case '`':
3018                        process_command_subs(dest, ctx, input, '`');
3019                        break;
3020                case '>':
3021                        redir_fd = redirect_opt_num(dest);
3022                        done_word(dest, ctx);
3023                        redir_style=REDIRECT_OVERWRITE;
3024                        if (next == '>') {
3025                                redir_style=REDIRECT_APPEND;
3026                                b_getch(input);
3027                        } else if (next == '(') {
3028                                syntax();   /* until we support >(list) Process Substitution */
3029                                return 1;
3030                        }
3031                        setup_redirect(ctx, redir_fd, redir_style, input);
3032                        break;
3033                case '<':
3034                        redir_fd = redirect_opt_num(dest);
3035                        done_word(dest, ctx);
3036                        redir_style=REDIRECT_INPUT;
3037                        if (next == '<') {
3038                                redir_style=REDIRECT_HEREIS;
3039                                b_getch(input);
3040                        } else if (next == '>') {
3041                                redir_style=REDIRECT_IO;
3042                                b_getch(input);
3043                        } else if (next == '(') {
3044                                syntax();   /* until we support <(list) Process Substitution */
3045                                return 1;
3046                        }
3047                        setup_redirect(ctx, redir_fd, redir_style, input);
3048                        break;
3049#endif
3050                case ';':
3051                        done_word(dest, ctx);
3052                        done_pipe(ctx,PIPE_SEQ);
3053                        break;
3054                case '&':
3055                        done_word(dest, ctx);
3056                        if (next=='&') {
3057                                b_getch(input);
3058                                done_pipe(ctx,PIPE_AND);
3059                        } else {
3060#ifndef __U_BOOT__
3061                                done_pipe(ctx,PIPE_BG);
3062#else
3063                                syntax_err();
3064                                return 1;
3065#endif
3066                        }
3067                        break;
3068                case '|':
3069                        done_word(dest, ctx);
3070                        if (next=='|') {
3071                                b_getch(input);
3072                                done_pipe(ctx,PIPE_OR);
3073                        } else {
3074                                /* we could pick up a file descriptor choice here
3075                                 * with redirect_opt_num(), but bash doesn't do it.
3076                                 * "echo foo 2| cat" yields "foo 2". */
3077#ifndef __U_BOOT__
3078                                done_command(ctx);
3079#else
3080                                syntax_err();
3081                                return 1;
3082#endif
3083                        }
3084                        break;
3085#ifndef __U_BOOT__
3086                case '(':
3087                case '{':
3088                        if (parse_group(dest, ctx, input, ch)!=0) return 1;
3089                        break;
3090                case ')':
3091                case '}':
3092                        syntax();   /* Proper use of this character caught by end_trigger */
3093                        return 1;
3094                        break;
3095#endif
3096                case SUBSTED_VAR_SYMBOL:
3097                        dest->nonnull = 1;
3098                        while (ch = b_getch(input), ch != EOF &&
3099                            ch != SUBSTED_VAR_SYMBOL) {
3100                                debug_printf("subst, pass=%d\n", ch);
3101                                if (input->__promptme == 0)
3102                                        return 1;
3103                                b_addchr(dest, ch);
3104                        }
3105                        debug_printf("subst, term=%d\n", ch);
3106                        if (ch == EOF) {
3107                                syntax();
3108                                return 1;
3109                        }
3110                        break;
3111                default:
3112                        syntax();   /* this is really an internal logic error */
3113                        return 1;
3114                        }
3115                }
3116        }
3117        /* complain if quote?  No, maybe we just finished a command substitution
3118         * that was quoted.  Example:
3119         * $ echo "`cat foo` plus more"
3120         * and we just got the EOF generated by the subshell that ran "cat foo"
3121         * The only real complaint is if we got an EOF when end_trigger != '\0',
3122         * that is, we were really supposed to get end_trigger, and never got
3123         * one before the EOF.  Can't use the standard "syntax error" return code,
3124         * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
3125        debug_printf("leaving parse_stream (EOF)\n");
3126        if (end_trigger != '\0') return -1;
3127        return 0;
3128}
3129
3130static void mapset(const unsigned char *set, int code)
3131{
3132        const unsigned char *s;
3133        for (s=set; *s; s++) map[*s] = code;
3134}
3135
3136static void update_ifs_map(void)
3137{
3138        /* char *ifs and char map[256] are both globals. */
3139        ifs = (uchar *)getenv("IFS");
3140        if (ifs == NULL) ifs=(uchar *)" \t\n";
3141        /* Precompute a list of 'flow through' behavior so it can be treated
3142         * quickly up front.  Computation is necessary because of IFS.
3143         * Special case handling of IFS == " \t\n" is not implemented.
3144         * The map[] array only really needs two bits each, and on most machines
3145         * that would be faster because of the reduced L1 cache footprint.
3146         */
3147        memset(map,0,sizeof(map)); /* most characters flow through always */
3148#ifndef __U_BOOT__
3149        mapset((uchar *)"\\$'\"`", 3);      /* never flow through */
3150        mapset((uchar *)"<>;&|(){}#", 1);   /* flow through if quoted */
3151#else
3152        {
3153                uchar subst[2] = {SUBSTED_VAR_SYMBOL, 0};
3154                mapset(subst, 3);       /* never flow through */
3155        }
3156        mapset((uchar *)"\\$'\"", 3);       /* never flow through */
3157        mapset((uchar *)";&|#", 1);         /* flow through if quoted */
3158#endif
3159        mapset(ifs, 2);            /* also flow through if quoted */
3160}
3161
3162/* most recursion does not come through here, the exeception is
3163 * from builtin_source() */
3164static int parse_stream_outer(struct in_str *inp, int flag)
3165{
3166
3167        struct p_context ctx;
3168        o_string temp=NULL_O_STRING;
3169        int rcode;
3170#ifdef __U_BOOT__
3171        int code = 1;
3172#endif
3173        do {
3174                ctx.type = flag;
3175                initialize_context(&ctx);
3176                update_ifs_map();
3177                if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset((uchar *)";$&|", 0);
3178                inp->promptmode=1;
3179                rcode = parse_stream(&temp, &ctx, inp,
3180                                     flag & FLAG_CONT_ON_NEWLINE ? -1 : '\n');
3181#ifdef __U_BOOT__
3182                if (rcode == 1) flag_repeat = 0;
3183#endif
3184                if (rcode != 1 && ctx.old_flag != 0) {
3185                        syntax();
3186#ifdef __U_BOOT__
3187                        flag_repeat = 0;
3188#endif
3189                }
3190                if (rcode != 1 && ctx.old_flag == 0) {
3191                        done_word(&temp, &ctx);
3192                        done_pipe(&ctx,PIPE_SEQ);
3193#ifndef __U_BOOT__
3194                        run_list(ctx.list_head);
3195#else
3196                        code = run_list(ctx.list_head);
3197                        if (code == -2) {       /* exit */
3198                                b_free(&temp);
3199                                code = 0;
3200                                /* XXX hackish way to not allow exit from main loop */
3201                                if (inp->peek == file_peek) {
3202                                        printf("exit not allowed from main input shell.\n");
3203                                        continue;
3204                                }
3205                                break;
3206                        }
3207                        if (code == -1)
3208                            flag_repeat = 0;
3209#endif
3210                } else {
3211                        if (ctx.old_flag != 0) {
3212                                free(ctx.stack);
3213                                b_reset(&temp);
3214                        }
3215#ifdef __U_BOOT__
3216                        if (inp->__promptme == 0) printf("<INTERRUPT>\n");
3217                        inp->__promptme = 1;
3218#endif
3219                        temp.nonnull = 0;
3220                        temp.quote = 0;
3221                        inp->p = NULL;
3222                        free_pipe_list(ctx.list_head,0);
3223                }
3224                b_free(&temp);
3225        /* loop on syntax errors, return on EOF */
3226        } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
3227                (inp->peek != static_peek || b_peek(inp)));
3228#ifndef __U_BOOT__
3229        return 0;
3230#else
3231        return (code != 0) ? 1 : 0;
3232#endif /* __U_BOOT__ */
3233}
3234
3235#ifndef __U_BOOT__
3236static int parse_string_outer(const char *s, int flag)
3237#else
3238int parse_string_outer(const char *s, int flag)
3239#endif  /* __U_BOOT__ */
3240{
3241        struct in_str input;
3242#ifdef __U_BOOT__
3243        char *p = NULL;
3244        int rcode;
3245        if (!s)
3246                return 1;
3247        if (!*s)
3248                return 0;
3249        if (!(p = strchr(s, '\n')) || *++p) {
3250                p = xmalloc(strlen(s) + 2);
3251                strcpy(p, s);
3252                strcat(p, "\n");
3253                setup_string_in_str(&input, p);
3254                rcode = parse_stream_outer(&input, flag);
3255                free(p);
3256                return rcode;
3257        } else {
3258#endif
3259        setup_string_in_str(&input, s);
3260        return parse_stream_outer(&input, flag);
3261#ifdef __U_BOOT__
3262        }
3263#endif
3264}
3265
3266#ifndef __U_BOOT__
3267static int parse_file_outer(FILE *f)
3268#else
3269int parse_file_outer(void)
3270#endif
3271{
3272        int rcode;
3273        struct in_str input;
3274#ifndef __U_BOOT__
3275        setup_file_in_str(&input, f);
3276#else
3277        setup_file_in_str(&input);
3278#endif
3279        rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON);
3280        return rcode;
3281}
3282
3283#ifdef __U_BOOT__
3284#ifdef CONFIG_NEEDS_MANUAL_RELOC
3285static void u_boot_hush_reloc(void)
3286{
3287        unsigned long addr;
3288        struct reserved_combo *r;
3289
3290        for (r=reserved_list; r<reserved_list+NRES; r++) {
3291                addr = (ulong) (r->literal) + gd->reloc_off;
3292                r->literal = (char *)addr;
3293        }
3294}
3295#endif
3296
3297int u_boot_hush_start(void)
3298{
3299        if (top_vars == NULL) {
3300                top_vars = malloc(sizeof(struct variables));
3301                top_vars->name = "HUSH_VERSION";
3302                top_vars->value = "0.01";
3303                top_vars->next = NULL;
3304                top_vars->flg_export = 0;
3305                top_vars->flg_read_only = 1;
3306#ifdef CONFIG_NEEDS_MANUAL_RELOC
3307                u_boot_hush_reloc();
3308#endif
3309        }
3310        return 0;
3311}
3312
3313static void *xmalloc(size_t size)
3314{
3315        void *p = NULL;
3316
3317        if (!(p = malloc(size))) {
3318            printf("ERROR : memory not allocated\n");
3319            for(;;);
3320        }
3321        return p;
3322}
3323
3324static void *xrealloc(void *ptr, size_t size)
3325{
3326        void *p = NULL;
3327
3328        if (!(p = realloc(ptr, size))) {
3329            printf("ERROR : memory not allocated\n");
3330            for(;;);
3331        }
3332        return p;
3333}
3334#endif /* __U_BOOT__ */
3335
3336#ifndef __U_BOOT__
3337/* Make sure we have a controlling tty.  If we get started under a job
3338 * aware app (like bash for example), make sure we are now in charge so
3339 * we don't fight over who gets the foreground */
3340static void setup_job_control(void)
3341{
3342        static pid_t shell_pgrp;
3343        /* Loop until we are in the foreground.  */
3344        while (tcgetpgrp (shell_terminal) != (shell_pgrp = getpgrp ()))
3345                kill (- shell_pgrp, SIGTTIN);
3346
3347        /* Ignore interactive and job-control signals.  */
3348        signal(SIGINT, SIG_IGN);
3349        signal(SIGQUIT, SIG_IGN);
3350        signal(SIGTERM, SIG_IGN);
3351        signal(SIGTSTP, SIG_IGN);
3352        signal(SIGTTIN, SIG_IGN);
3353        signal(SIGTTOU, SIG_IGN);
3354        signal(SIGCHLD, SIG_IGN);
3355
3356        /* Put ourselves in our own process group.  */
3357        setsid();
3358        shell_pgrp = getpid ();
3359        setpgid (shell_pgrp, shell_pgrp);
3360
3361        /* Grab control of the terminal.  */
3362        tcsetpgrp(shell_terminal, shell_pgrp);
3363}
3364
3365int hush_main(int argc, char * const *argv)
3366{
3367        int opt;
3368        FILE *input;
3369        char **e = environ;
3370
3371        /* XXX what should these be while sourcing /etc/profile? */
3372        global_argc = argc;
3373        global_argv = argv;
3374
3375        /* (re?) initialize globals.  Sometimes hush_main() ends up calling
3376         * hush_main(), therefore we cannot rely on the BSS to zero out this
3377         * stuff.  Reset these to 0 every time. */
3378        ifs = NULL;
3379        /* map[] is taken care of with call to update_ifs_map() */
3380        fake_mode = 0;
3381        interactive = 0;
3382        close_me_head = NULL;
3383        last_bg_pid = 0;
3384        job_list = NULL;
3385        last_jobid = 0;
3386
3387        /* Initialize some more globals to non-zero values */
3388        set_cwd();
3389#ifdef CONFIG_FEATURE_COMMAND_EDITING
3390        cmdedit_set_initial_prompt();
3391#else
3392        PS1 = NULL;
3393#endif
3394        PS2 = "> ";
3395
3396        /* initialize our shell local variables with the values
3397         * currently living in the environment */
3398        if (e) {
3399                for (; *e; e++)
3400                        set_local_var(*e, 2);   /* without call putenv() */
3401        }
3402
3403        last_return_code=EXIT_SUCCESS;
3404
3405
3406        if (argv[0] && argv[0][0] == '-') {
3407                debug_printf("\nsourcing /etc/profile\n");
3408                if ((input = fopen("/etc/profile", "r")) != NULL) {
3409                        mark_open(fileno(input));
3410                        parse_file_outer(input);
3411                        mark_closed(fileno(input));
3412                        fclose(input);
3413                }
3414        }
3415        input=stdin;
3416
3417        while ((opt = getopt(argc, argv, "c:xif")) > 0) {
3418                switch (opt) {
3419                        case 'c':
3420                                {
3421                                        global_argv = argv+optind;
3422                                        global_argc = argc-optind;
3423                                        opt = parse_string_outer(optarg, FLAG_PARSE_SEMICOLON);
3424                                        goto final_return;
3425                                }
3426                                break;
3427                        case 'i':
3428                                interactive++;
3429                                break;
3430                        case 'f':
3431                                fake_mode++;
3432                                break;
3433                        default:
3434#ifndef BB_VER
3435                                fprintf(stderr, "Usage: sh [FILE]...\n"
3436                                                "   or: sh -c command [args]...\n\n");
3437                                exit(EXIT_FAILURE);
3438#else
3439                                show_usage();
3440#endif
3441                }
3442        }
3443        /* A shell is interactive if the `-i' flag was given, or if all of
3444         * the following conditions are met:
3445         *        no -c command
3446         *    no arguments remaining or the -s flag given
3447         *    standard input is a terminal
3448         *    standard output is a terminal
3449         *    Refer to Posix.2, the description of the `sh' utility. */
3450        if (argv[optind]==NULL && input==stdin &&
3451                        isatty(fileno(stdin)) && isatty(fileno(stdout))) {
3452                interactive++;
3453        }
3454
3455        debug_printf("\ninteractive=%d\n", interactive);
3456        if (interactive) {
3457                /* Looks like they want an interactive shell */
3458#ifndef CONFIG_FEATURE_SH_EXTRA_QUIET
3459                printf( "\n\n" BB_BANNER " hush - the humble shell v0.01 (testing)\n");
3460                printf( "Enter 'help' for a list of built-in commands.\n\n");
3461#endif
3462                setup_job_control();
3463        }
3464
3465        if (argv[optind]==NULL) {
3466                opt=parse_file_outer(stdin);
3467                goto final_return;
3468        }
3469
3470        debug_printf("\nrunning script '%s'\n", argv[optind]);
3471        global_argv = argv+optind;
3472        global_argc = argc-optind;
3473        input = xfopen(argv[optind], "r");
3474        opt = parse_file_outer(input);
3475
3476#ifdef CONFIG_FEATURE_CLEAN_UP
3477        fclose(input);
3478        if (cwd && cwd != unknown)
3479                free((char*)cwd);
3480        {
3481                struct variables *cur, *tmp;
3482                for(cur = top_vars; cur; cur = tmp) {
3483                        tmp = cur->next;
3484                        if (!cur->flg_read_only) {
3485                                free(cur->name);
3486                                free(cur->value);
3487                                free(cur);
3488                        }
3489                }
3490        }
3491#endif
3492
3493final_return:
3494        return(opt?opt:last_return_code);
3495}
3496#endif
3497
3498static char *insert_var_value(char *inp)
3499{
3500        return insert_var_value_sub(inp, 0);
3501}
3502
3503static char *insert_var_value_sub(char *inp, int tag_subst)
3504{
3505        int res_str_len = 0;
3506        int len;
3507        int done = 0;
3508        char *p, *p1, *res_str = NULL;
3509
3510        while ((p = strchr(inp, SPECIAL_VAR_SYMBOL))) {
3511                /* check the beginning of the string for normal characters */
3512                if (p != inp) {
3513                        /* copy any characters to the result string */
3514                        len = p - inp;
3515                        res_str = xrealloc(res_str, (res_str_len + len));
3516                        strncpy((res_str + res_str_len), inp, len);
3517                        res_str_len += len;
3518                }
3519                inp = ++p;
3520                /* find the ending marker */
3521                p = strchr(inp, SPECIAL_VAR_SYMBOL);
3522                *p = '\0';
3523                /* look up the value to substitute */
3524                if ((p1 = lookup_param(inp))) {
3525                        if (tag_subst)
3526                                len = res_str_len + strlen(p1) + 2;
3527                        else
3528                                len = res_str_len + strlen(p1);
3529                        res_str = xrealloc(res_str, (1 + len));
3530                        if (tag_subst) {
3531                                /*
3532                                 * copy the variable value to the result
3533                                 * string
3534                                 */
3535                                strcpy((res_str + res_str_len + 1), p1);
3536
3537                                /*
3538                                 * mark the replaced text to be accepted as
3539                                 * is
3540                                 */
3541                                res_str[res_str_len] = SUBSTED_VAR_SYMBOL;
3542                                res_str[res_str_len + 1 + strlen(p1)] =
3543                                        SUBSTED_VAR_SYMBOL;
3544                        } else
3545                                /*
3546                                 * copy the variable value to the result
3547                                 * string
3548                                 */
3549                                strcpy((res_str + res_str_len), p1);
3550
3551                        res_str_len = len;
3552                }
3553                *p = SPECIAL_VAR_SYMBOL;
3554                inp = ++p;
3555                done = 1;
3556        }
3557        if (done) {
3558                res_str = xrealloc(res_str, (1 + res_str_len + strlen(inp)));
3559                strcpy((res_str + res_str_len), inp);
3560                while ((p = strchr(res_str, '\n'))) {
3561                        *p = ' ';
3562                }
3563        }
3564        return (res_str == NULL) ? inp : res_str;
3565}
3566
3567static char **make_list_in(char **inp, char *name)
3568{
3569        int len, i;
3570        int name_len = strlen(name);
3571        int n = 0;
3572        char **list;
3573        char *p1, *p2, *p3;
3574
3575        /* create list of variable values */
3576        list = xmalloc(sizeof(*list));
3577        for (i = 0; inp[i]; i++) {
3578                p3 = insert_var_value(inp[i]);
3579                p1 = p3;
3580                while (*p1) {
3581                        if (*p1 == ' ') {
3582                                p1++;
3583                                continue;
3584                        }
3585                        if ((p2 = strchr(p1, ' '))) {
3586                                len = p2 - p1;
3587                        } else {
3588                                len = strlen(p1);
3589                                p2 = p1 + len;
3590                        }
3591                        /* we use n + 2 in realloc for list,because we add
3592                         * new element and then we will add NULL element */
3593                        list = xrealloc(list, sizeof(*list) * (n + 2));
3594                        list[n] = xmalloc(2 + name_len + len);
3595                        strcpy(list[n], name);
3596                        strcat(list[n], "=");
3597                        strncat(list[n], p1, len);
3598                        list[n++][name_len + len + 1] = '\0';
3599                        p1 = p2;
3600                }
3601                if (p3 != inp[i]) free(p3);
3602        }
3603        list[n] = NULL;
3604        return list;
3605}
3606
3607/*
3608 * Make new string for parser
3609 * inp     - array of argument strings to flatten
3610 * nonnull - indicates argument was quoted when originally parsed
3611 */
3612static char *make_string(char **inp, int *nonnull)
3613{
3614        char *p;
3615        char *str = NULL;
3616        int n;
3617        int len = 2;
3618        char *noeval_str;
3619        int noeval = 0;
3620
3621        noeval_str = get_local_var("HUSH_NO_EVAL");
3622        if (noeval_str != NULL && *noeval_str != '0' && *noeval_str != '\0')
3623                noeval = 1;
3624        for (n = 0; inp[n]; n++) {
3625                p = insert_var_value_sub(inp[n], noeval);
3626                str = xrealloc(str, (len + strlen(p) + (2 * nonnull[n])));
3627                if (n) {
3628                        strcat(str, " ");
3629                } else {
3630                        *str = '\0';
3631                }
3632                if (nonnull[n])
3633                        strcat(str, "'");
3634                strcat(str, p);
3635                if (nonnull[n])
3636                        strcat(str, "'");
3637                len = strlen(str) + 3;
3638                if (p != inp[n]) free(p);
3639        }
3640        len = strlen(str);
3641        *(str + len) = '\n';
3642        *(str + len + 1) = '\0';
3643        return str;
3644}
3645
3646#ifdef __U_BOOT__
3647static int do_showvar(cmd_tbl_t *cmdtp, int flag, int argc,
3648                      char * const argv[])
3649{
3650        int i, k;
3651        int rcode = 0;
3652        struct variables *cur;
3653
3654        if (argc == 1) {                /* Print all env variables      */
3655                for (cur = top_vars; cur; cur = cur->next) {
3656                        printf ("%s=%s\n", cur->name, cur->value);
3657                        if (ctrlc ()) {
3658                                puts ("\n ** Abort\n");
3659                                return 1;
3660                        }
3661                }
3662                return 0;
3663        }
3664        for (i = 1; i < argc; ++i) {    /* print single env variables   */
3665                char *name = argv[i];
3666
3667                k = -1;
3668                for (cur = top_vars; cur; cur = cur->next) {
3669                        if(strcmp (cur->name, name) == 0) {
3670                                k = 0;
3671                                printf ("%s=%s\n", cur->name, cur->value);
3672                        }
3673                        if (ctrlc ()) {
3674                                puts ("\n ** Abort\n");
3675                                return 1;
3676                        }
3677                }
3678                if (k < 0) {
3679                        printf ("## Error: \"%s\" not defined\n", name);
3680                        rcode ++;
3681                }
3682        }
3683        return rcode;
3684}
3685
3686U_BOOT_CMD(
3687        showvar, CONFIG_SYS_MAXARGS, 1, do_showvar,
3688        "print local hushshell variables",
3689        "\n    - print values of all hushshell variables\n"
3690        "showvar name ...\n"
3691        "    - print value of hushshell variable 'name'"
3692);
3693
3694#endif
3695/****************************************************************************/
3696