LXR uboot/include/configs/ap325rxa.h

   1/*
   2 * Configuation settings for the Renesas Solutions AP-325RXA board
   3 *
   4 * Copyright (C) 2008 Renesas Solutions Corp.
   5 * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
   6 *
   7 * SPDX-License-Identifier:     GPL-2.0+
   8 */
   9
  10#ifndef __AP325RXA_H
  11#define __AP325RXA_H
  12
  13#undef DEBUG
  14#define CONFIG_CPU_SH7723       1
  15#define CONFIG_AP325RXA 1
  16
  17#define CONFIG_CMD_PING
  18#define CONFIG_CMD_SDRAM
  19#define CONFIG_CMD_IDE
  20#define CONFIG_CMD_EXT2
  21#define CONFIG_DOS_PARTITION
  22
  23#define CONFIG_BAUDRATE         38400
  24#define CONFIG_BOOTDELAY        3
  25#define CONFIG_BOOTARGS         "console=ttySC2,38400"
  26
  27#define CONFIG_VERSION_VARIABLE
  28#undef  CONFIG_SHOW_BOOT_PROGRESS
  29
  30/* SMC9118 */
  31#define CONFIG_SMC911X 1
  32#define CONFIG_SMC911X_32_BIT 1
  33#define CONFIG_SMC911X_BASE 0xB6080000
  34
  35/* MEMORY */
  36#define AP325RXA_SDRAM_BASE             (0x88000000)
  37#define AP325RXA_FLASH_BASE_1           (0xA0000000)
  38#define AP325RXA_FLASH_BANK_SIZE        (128 * 1024 * 1024)
  39
  40#define CONFIG_SYS_TEXT_BASE    0x8FFC0000
  41
  42/* undef to save memory */
  43#define CONFIG_SYS_LONGHELP
  44/* Monitor Command Prompt */
  45/* Buffer size for input from the Console */
  46#define CONFIG_SYS_CBSIZE               256
  47/* Buffer size for Console output */
  48#define CONFIG_SYS_PBSIZE               256
  49/* max args accepted for monitor commands */
  50#define CONFIG_SYS_MAXARGS              16
  51/* Buffer size for Boot Arguments passed to kernel */
  52#define CONFIG_SYS_BARGSIZE     512
  53/* List of legal baudrate settings for this board */
  54#define CONFIG_SYS_BAUDRATE_TABLE       { 38400 }
  55
  56/* SCIF */
  57#define CONFIG_SCIF_CONSOLE 1
  58#define CONFIG_SCIF_A           1 /* SH7723 has SCIF and SCIFA */
  59#define CONFIG_CONS_SCIF5       1
  60
  61/* Suppress display of console information at boot */
  62#undef  CONFIG_SYS_CONSOLE_INFO_QUIET
  63#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  64#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
  65
  66#define CONFIG_SYS_MEMTEST_START        (AP325RXA_SDRAM_BASE)
  67#define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
  68
  69/* Enable alternate, more extensive, memory test */
  70#undef  CONFIG_SYS_ALT_MEMTEST
  71/* Scratch address used by the alternate memory test */
  72#undef  CONFIG_SYS_MEMTEST_SCRATCH
  73
  74/* Enable temporary baudrate change while serial download */
  75#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
  76
  77#define CONFIG_SYS_SDRAM_BASE   (AP325RXA_SDRAM_BASE)
  78/* maybe more, but if so u-boot doesn't know about it... */
  79#define CONFIG_SYS_SDRAM_SIZE   (128 * 1024 * 1024)
  80/* default load address for scripts ?!? */
  81#define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
  82
  83/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
  84#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1)
  85/* Monitor size */
  86#define CONFIG_SYS_MONITOR_LEN  (128 * 1024)
  87/* Size of DRAM reserved for malloc() use */
  88#define CONFIG_SYS_MALLOC_LEN   (256 * 1024)
  89#define CONFIG_SYS_BOOTMAPSZ    (8 * 1024 * 1024)
  90
  91/* FLASH */
  92#define CONFIG_FLASH_CFI_DRIVER 1
  93#define CONFIG_SYS_FLASH_CFI
  94#undef  CONFIG_SYS_FLASH_QUIET_TEST
  95/* print 'E' for empty sector on flinfo */
  96#define CONFIG_SYS_FLASH_EMPTY_INFO
  97/* Physical start address of Flash memory */
  98#define CONFIG_SYS_FLASH_BASE   (AP325RXA_FLASH_BASE_1)
  99/* Max number of sectors on each Flash chip */
 100#define CONFIG_SYS_MAX_FLASH_SECT       512
 101
 102/*
 103 * IDE support
 104 */
 105#define CONFIG_IDE_RESET        1
 106#define CONFIG_SYS_PIO_MODE             1
 107#define CONFIG_SYS_IDE_MAXBUS           1       /* IDE bus */
 108#define CONFIG_SYS_IDE_MAXDEVICE        1
 109#define CONFIG_SYS_ATA_BASE_ADDR        0xB4180000
 110#define CONFIG_SYS_ATA_STRIDE           2       /* 1bit shift */
 111#define CONFIG_SYS_ATA_DATA_OFFSET      0x200   /* data reg offset */
 112#define CONFIG_SYS_ATA_REG_OFFSET       0x200   /* reg offset */
 113#define CONFIG_SYS_ATA_ALT_OFFSET       0x210   /* alternate register offset */
 114#define CONFIG_IDE_SWAP_IO
 115
 116/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
 117#define CONFIG_SYS_MAX_FLASH_BANKS      1
 118#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
 119
 120/* Timeout for Flash erase operations (in ms) */
 121#define CONFIG_SYS_FLASH_ERASE_TOUT     (3 * 1000)
 122/* Timeout for Flash write operations (in ms) */
 123#define CONFIG_SYS_FLASH_WRITE_TOUT     (3 * 1000)
 124/* Timeout for Flash set sector lock bit operations (in ms) */
 125#define CONFIG_SYS_FLASH_LOCK_TOUT      (3 * 1000)
 126/* Timeout for Flash clear lock bit operations (in ms) */
 127#define CONFIG_SYS_FLASH_UNLOCK_TOUT    (3 * 1000)
 128
 129/*
 130 * Use hardware flash sectors protection instead
 131 * of U-Boot software protection
 132 */
 133#undef  CONFIG_SYS_FLASH_PROTECTION
 134#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
 135
 136/* ENV setting */
 137#define CONFIG_ENV_IS_IN_FLASH
 138#define CONFIG_ENV_OVERWRITE    1
 139#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 140#define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
 141#define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 142/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
 143#define CONFIG_ENV_OFFSET               (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 144#define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SECT_SIZE)
 145
 146/* Board Clock */
 147#define CONFIG_SYS_CLK_FREQ     33333333
 148#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 149#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 150#define CONFIG_SYS_TMU_CLK_DIV          (4)     /* 4 (default), 16, 64, 256 or 1024 */
 151
 152#endif  /* __AP325RXA_H */
 153